Shear melting and recovery of crosslinkable cellulose nanocrystal-polymer gels

Ductile-to-brittle transition and yielding in soft amorphous materials: perspectives and open questions

Soft amorphous materials are viscoelastic solids ubiquitously found around us, from clays and cementitious pastes to emulsions and physical gels encountered in food or biomedical engineering. Under an external deformation, these materials undergo a noteworthy transition from a solid to a liquid state that reshapes the material microstructure. This yielding transition was the main theme of a workshop held from January 9 to 13, 2023 at the Lorentz Center in Leiden. The manuscript presented here offers a critical perspective on the subject, synthesizing insights from the various brainstorming sessions and informal discussions that unfolded during this week of vibrant exchange of ideas. The result of these exchanges takes the form of a series of open questions that represent outstanding experimental, numerical, and theoretical challenges to be tackled in the near future.

Injectable Hydrogels Based on Inter-Polyelectrolyte Interactions between Hyaluronic Acid, Gelatin, and Cationic Cellulose Nanocrystals

The present work dealt with the development of physically cross-linked injectable hydrogels with potential applications in tissue engineering. The hydrogels were composed of a ternary mixture of a polyanion and a polyampholyte, hyaluronic acid (HA) and gelatin, respectively, bridged by cationic cellulose nanocrystals (cCNCs). A 3D network is formed by employing attractive electrostatic interactions and hydrogen bonding between these components under physiological conditions. The hydrogels demonstrated low viscosity at high stresses, enabling easy injection, structural stability at low stresses (<15 Pa), and nearly complete structure recovery within several minutes. Increasing the cCNC content (>3%) reduced hydrogel swelling and decelerated the degradation in phosphate-buffered saline as compared to that in pure HA and HA-gelatin samples. Biological evaluation of the hydrogel elutions showed excellent cell viability. The proliferation of fibroblasts exposed to elutions of hydrogels with 5% cCNCs reached ∼200% compared to that in the positive control after 11 days. Considering these results, the prepared hydrogels hold great potential in biomedical applications, such as injectable dermal fillers, 3D bioprintable inks, or 3D scaffolds to support and promote soft tissue regeneration.

Slow dynamics and time–composition superposition in gels of cellulose nanocrystals

Cellulose nanocrystals (CNCs) are rodlike biosourced colloidal particles used as key building blocks in a growing number of materials with innovative mechanical or optical properties. While CNCs form stable suspensions at low volume fractions in pure water, they aggregate in the presence of salt and form colloidal gels with time-dependent properties. Here, we study the impact of salt concentration on the slow aging dynamics of CNC gels following the cessation of a high-shear flow that fully fluidizes the sample. We show that the higher the salt content, the faster the recovery of elasticity upon flow cessation. Most remarkably, the elastic modulus G′ obeys a time–composition superposition principle: the temporal evolution of G′ can be rescaled onto a universal sigmoidal master curve spanning 13 orders of magnitude in time for a wide range of salt concentrations. Such a rescaling is obtained through a time-shift factor that follows a steep power-law decay with increasing salt concentration until it saturates at large salt content. These findings are robust to changes in the type of salt and the CNC content. We further show that both linear and nonlinear rheological properties of CNC gels of various compositions, including, e.g., the frequency-dependence of viscoelastic spectra and the yield strain, can be rescaled based on the sample age along the general master curve. Our results provide strong evidence for universality in the aging dynamics of CNC gels and call for microstructural investigations during recovery as well as theoretical modeling of time–composition superposition in rodlike colloids.

Development of a Hybrid Nanoink for 3D Bioprinting of Heterogeneous Tumor Models

Despite the rapid progress in applying three-dimensional (3D) printing in the field of tissue engineering, fabrication of heterogeneous and complex 3D tumor models remains a challenge. In this study, we report a hybrid nanoink (AGC) composed of alginate, gelatin methacryloyl (GelMA), and cellulose nanocrystal (CNC), designed for multinozzle microextrusion 3D printing of tumor models. Our results show that the ink consisting of 2 wt % alginate, 4 wt % GelMA, and 6 wt % cellulose nanocrystals (AGC246) possesses a superior shear-thinning property and little hysteresis in viscosity recovery. The fabrication of a colorectal cancer (CRC) model is demonstrated by printing a 3D topological substrate with AGC246 and then seeding/printing endothelial (EA-hy 926) and colorectal carcinoma (HCT 116) cells on top. Direct seeding of cells by dropping a cell suspension onto the 3D substrate with distinctive topological features (villi and trenches) deemed inadequate in either creating a monolayer of endothelial cells or precise positioning of cancer cell clusters, even with surface treatment to promote cell adhesion. In contrast, 3D biopinting of a CRC model using cell-laden AGC153, coupled with dual ultraviolet (UV) and ionic cross-linking, is shown to be successful. Hence, this study brings advancements in 3D bioprinting technology through innovative material and methodology designs, which could enable the fabrication of complex in vitro models for both fundamental studies of disease processes and applications in drug screening.

Cellulose Nanocrystal Liquid Crystal Phases: Progress and Challenges in Characterization Using Rheology Coupled to Optics, Scattering, and Spectroscopy

Cellulose nanocrystals (CNCs) self-assemble and can be flow-assembled to liquid crystalline orders in a water suspension. The orders range from nano- to macroscale with the contributions of individual crystals, their micron clusters, and macroscopic assemblies. The resulting hierarchies are optically active materials that exhibit iridescence, reflectance, and light transmission. Although these assemblies have the potential for future renewable materials, details about structures on different hierarchical levels that span from the nano- to the macroscale are still not unraveled. Rheological characterization is essential for investigating flow properties; however, bulk material properties make it difficult to capture the various length-scales during assembly of the suspensions, for example, in simple shear flow. Rheometry is combined with other characterization methods to allow direct analysis of the structure development in the individual hierarchical levels. While optical techniques, scattering, and spectroscopy are often used to complement rheological observations, coupling them in situ to allow simultaneous observation is paramount to fully understand the details of CNC assembly from liquid to solid. This Review provides an overview of achievements in the coupled analytics, as well as our current opinion about opportunities to unravel the structural distinctiveness of cellulose nanomaterials.

From Equilibrium Liquid Crystal Formation and Kinetic Arrest to Photonic Bandgap Films Using Suspensions of Cellulose Nanocrystals

The lyotropic cholesteric liquid crystal phase developed by suspensions of cellulose nanocrystals (CNCs) has come increasingly into focus from numerous directions over the last few years. In part, this is because CNC suspensions are sustainably produced aqueous suspensions of a fully bio-derived nanomaterial with attractive properties. Equally important is the interesting and useful behavior exhibited by solid CNC films, created by drying a cholesteric-forming suspension. However, the pathway along which these films are realized, starting from a CNC suspension that may have low enough concentration to be fully isotropic, is more complex than often appreciated, leading to reproducibility problems and confusion. Addressing a broad audience of physicists, chemists, materials scientists and engineers, this Review focuses primarily on the physics and physical chemistry of CNC suspensions and the process of drying them. The ambition is to explain rather than to repeat, hence we spend more time than usual on the meanings and relevance of the key colloid and liquid crystal science concepts that must be mastered in order to understand the behavior of CNC suspensions, and we present some interesting analyses, arguments and data for the first time. We go through the development of cholesteric nuclei (tactoids) from the isotropic phase and their potential impact on the final dry films; the spontaneous CNC fractionation that takes place in the phase coexistence window; the kinetic arrest that sets in when the CNC mass fraction reaches ∼10 wt.%, preserving the cholesteric helical order until the film has dried; the ’coffee-ring effect’ active prior to kinetic arrest, often ruining the uniformity in the produced films; and the compression of the helix during the final water evaporation, giving rise to visible structural color in the films.

Mechanical and Thermal Properties of Waterborne Polyurethane Coating Modified through One-Step Cellulose Nanocrystals/Graphene Materials Sols Method

Developing multifunctional coatings with excellent mechanical and thermal properties is highly desirable for wood-based composite application. The recent development of waterborne coatings for wood products suggests that a promising thermosetting material needs to also have properties like low volatile organic contents (VOCs), hardness, and fast curing. The cellulose nanocrystals/graphene materials (CNC/GM) sols were prepared through the one-step method as the thermally conductive and reinforced modifier for preparing waterborne polyurethane (WPU) coatings. The influence of this modifier on the thermal and mechanical properties such as thermal conductivity, abrasion resistance, and adhesion of WPU coatings was investigated. The results indicated that adding CNC/GM sols increased the hardness, abrasion resistance, and thermal conductivity of the WPU coatings, and meanwhile maintained the coating adhesion at the highest grade (level 1). The highest abrasion resistance value of 0.023 g/100 r was obtained for the modified WPU coating when the addition of GM was 3%.