Integrated Solution for As(III) Contamination in Water Based on Crystalline Porous Organic Salts

A stable crystalline organic porous salt (CPOSs-NXU-1) with 1D apertures has been assembled by the solvothermal method, which shows high-sensitivity "turn-on" fluorescence detection and large-capacity adsorption of As(III) ions in water. The detection limits, saturated adsorption capacity, and removal rate of CPOSs-NXU-1 for As(III) ions in an aqueous solution can reach 74.34 nm (5.57 ppb), 451.01 mg g-1, and 99.6%, respectively, at pH = 7 and room temperature. With the aid of XPS, IR, Raman, and DFT theoretical calculations, it is determined that CPOSs-NXU-1 adsorbed As(III) ions in the form of H2AsO3 - and H3AsO3 through hydrogen bonding between the host and guest. The mechanism for fluorescence sensitization of As(III) ions to CPOSs-NXU-1 is mainly to increase the energy level difference between the ground state and excited state investigated by UV-vis absorption spectra, UV-vis diffuse reflectance spectra, and theoretical calculations. By constructing fluorescent CPOSs, an integrated solution has been achieved to treating As(III) contamination in the water that is equipped with detection and removal. These results blaze a promising path for addressing trivalent arsenic contamination in water efficiently, rapidly, and economically.

Time-Resolved Spectroscopy for Dynamic Investigation of Photoresponsive Metal-Organic Frameworks

Photoresponsive MOFs with precise and adjustable reticular structures are attractive for light conversion applications. Uncovering the photoinduced carrier dynamics lays the essential foundation for the further development and optimization of the MOF material. With the application of time-resolved spectroscopy, photophysical processes including excimer formation, energy transfer/migration, and charge transfer/separation have been widely investigated. However, the identification of distinct photophysical processes in real experimental MOF spectra still remains difficult due to the spectral and dynamic complexity of MOFs. In this Perspective, we summarize the typical spectral features of these photophysical processes and the related analysis methods for dynamic studies performed by time-resolved photoluminescence (TR-PL) and transient absorption (TA) spectroscopy. Based on the recent understanding of excited-state properties of photoresponsive MOFs and the discussion of challenges and future outlooks, this Perspective aims to provide convenience for MOF kinetic analysis and contribute to the further development of photoresponsive MOF material.

A Eu-MOF-Based Fluorescent Sensing Probe for the Detection of Tryptophan and Cu2+ in Aqueous Solutions

Abnormal tryptophan (Trp) metabolism can be used as an important indicator of chronic hepatitis, paranoia, Parkinson's disease and other diseases. Deficiency or excessive accumulation of Cu2+ can cause diseases such as Wilson's disease and Alzheimer's disease. Eu-based metal-organic framework (Eu-MOF) was successfully prepared for fluorescence sensing of Trp and Cu2+ in an aqueous solution (pH = 7.4). Eu-MOF showed high selectivity and sensitivity for Trp and Cu2+ with detection limits of 0.22 µM and 0.09 µM and Ksv of 6.17 × 103 M- 1 and 2.37 × 104 M- 1 respectively. Trp and Cu2+ had overlapped UV absorption spectra with that of Eu-MOF and competed for the excitation light source. Trp also attenuated the antennae effect of organic ligands on Eu-MOF, thus quenching the red fluorescence of Eu-MOF. This study provides insights into the application of MOFs in bioanalysis and diagnostics.

Advances in metal-organic frameworks for water remediation applications

Rapid industrialization and agricultural development have resulted in the accumulation of a variety of harmful contaminants in water resources. Thus, various approaches such as adsorption, photocatalytic degradation and methods for sensing water contaminants have been developed to solve the problem of water pollution. Metal-organic frameworks (MOFs) are a class of coordination networks comprising organic-inorganic hybrid porous materials having organic ligands attached to inorganic metal ions/clusters via coordination bonds. MOFs represent an emerging class of materials for application in water remediation owing to their versatile structural and chemical characteristics, such as well-ordered porous structures, large specific surface area, structural diversity, and tunable sites. The present review is focused on recent advances in various MOFs for application in water remediation via the adsorption and photocatalytic degradation of water contaminants. The sensing of water pollutants using MOFs via different approaches, such as luminescence, electrochemical, colorimetric, and surface-enhanced Raman spectroscopic techniques, is also discussed. The high porosity and chemical tunability of MOFs are the main driving forces for their widespread applications, which have huge potential for their commercial use.

Studying Fluorescence Sensing of Acetone and Tryptophan and Antibacterial Properties Based on Zinc-Based Triple Interpenetrating Metal-Organic Skeletons

Two triple interpenetrating Zn(II)-based MOFs were studied in this paper. Named [Zn6(1,4-bpeb)4(IPA)6(H2O)]n (MOF-1) and {[Zn3(1,4-bpeb)1.5(DDBA)3]n·2DMF} (MOF-2), {1,4-bpeb = 1,4-bis [2-(4-pyridy1) ethenyl]benze, IPA = Isophthalic acid, DDBA = 3,3'-Azodibenzoic acid}, they were synthesized by the hydrothermal method and were characterized and stability tested. The results showed that MOF-1 had good acid-base stability and solvent stability. Furthermore, MOF-1 had excellent green fluorescence and with different phenomena in different solvents, which was almost completely quenched in acetone. Based on this phenomenon, an acetone sensing test was carried out, where the detection limit of acetone was calculated to be 0.00365% (volume ratio). Excitingly, the MOF-1 could also be used as a proportional fluorescent probe to specifically detect tryptophan, with a calculated detection limit of 34.84 μM. Furthermore, the mechanism was explained through energy transfer and competitive absorption (fluorescence resonance energy transfer (FRET)) and internal filtration effect (IFE). For antibacterial purposes, the minimum inhibitory concentrations of MOF-1 against Escherichia coli and Staphylococcus aureus were 19.52 µg/mL and 39.06 µg/mL, respectively, and the minimum inhibitory concentrations of MOF-2 against Escherichia coli and Staphylococcus aureus were 68.36 µg/mL and 136.72 µg/mL, respectively.

Lanthanide-MOFs as multi-responsive photoluminescence sensor for sensitively detecting Fe3+, Cr2O72- and nitrofuran antibiotics

Fast and selective detection of contaminants plays a key role in meeting human health and environmental concerns. Herein, two groups of isostructural lanthanide MOFs, [Ln(Hpta)(oxalic acid)]·H2O (1-Eu, 2-Gd) and [Ln(pta)(oxalic acid)0.5(H2O)2]·2H2O (3-Eu, 4-Gd) (H2pta = 2-(4-pyridyl)-terephthalic acid, C2O4- = oxalic acid), were synthesized by solvothermal method. Single crystal X-ray diffraction reveals that 1 and 2 are 3D neutral frameworks, while 3 and 4 consist of 2D layers with parallelogram holes and stack into 3D networks through O-H⋯N and O-H⋯O hydrogen bonding interactions. All complexes remain crystalline and stable below 400 °C, suggesting preeminent thermostability. Noteworthily, only 3 shows excellent chemical stability in water and organic solvent. Therefore, the solid-state fluorescence spectrum was used to characterize 3 which exhibited intense red luminescence. The N active sites in the pore channels of 3 are conducive to displaying a distinct quenching effect for Fe3+ cations in aqueous solutions, Cr2O72- anions in DMF and DMA solutions, and nitrofuran antibiotics in the DMF solvent. Overall, 3 is a prospective luminescent sensor for detecting Fe3+, Cr2O72- and nitrofuran antibiotics.

SCSC Transformation and Post-Synthesis Modification of MOFs with Proton Conduction and Ratiometric Fluorescence-Sensing Properties

The modification of metal-organic framework (MOF) materials to facilitate their practical applications is an extremely challenging and meaningful topic. In this work, two stepwise modification strategies for MOFs were conducted. First, we have demonstrated a single-crystal-to-single-crystal (SCSC) transformation from a microporous three-dimensional (3D) MOF to a two-dimensional (2D) coordination polymer (CP). The centrosymmetric [Cd(3-bpdb)(MeO-ip)]_n (1) transforms into a chiral [Cd₂(3-bpdb)(MeO-ip)₂(CH₃OH)₂]_n (2), which is triggered by the reaction time with methanol that acts as a structure-directing agent. The conversion relationship of 1 to 2 at different reaction times was studied in detail. Density functional theory (DFT) calculations clearly state that the irreversible formation of 2 is thermodynamically favorable. Intriguingly, 2 exhibits good proton conduction of 1.34 × 10^-3 S cm^-1 under 363 K and 98% relative humidity (RH) due to unique H-bond network characteristics. To the best of our knowledge, there are very few cases of 3D to 2D SCSC transformation stimulated by reaction time. The results have important implications for understanding the SCSC transformation mechanism and synthetic chemistry. On the other hand, the lanthanide³⁺-functionalized hybrids (Ln³⁺-MOF), Ln³⁺@1, were continuously prepared by incorporating luminescent Ln³⁺ ions into the structure of 1 through encapsulating post-synthesis modification (PSM). Tb³⁺@1 exhibits double emission in water and shows visual ratiometric fluorescence behavior for sensing glutamic acid (Glu), tryptophan (Trp), and Al³⁺, which is more reliable and accurate than single emission. Our work may not only provide new insights into the multiple modification of MOF materials but also promote the practical application of such materials.

Highly pH-Responsive Sensor Based on a EuIII Metal-Organic Framework with Efficient Recognition of Arginine and Lysine in Living Cells

A lanthanide-based three-dimensional metal-organic framework with excellent water, acid/base, and solvent stability, namely {[(CH3)2NH2]0.7[Eu2(BTDBA)1.5(lac)0.7(H2O)2]·2H2O·2DMF·2CH3CN}n (JXUST-29, H4BTDBA = 4',4‴-(benzo[c][1,2,5]thiadiazole-4,7-diyl)bis([1,1'-biphenyl]-3,5-dicarboxylic acid), Hlac = lactic acid), has been synthesized and characterized. Since the N atoms of the thiadiazole group will not coordinate with lanthanide ions, JXUST-29 has a free basic N-site accessible to small H+ ions, which allows it to be used as a promising pH fluorescence sensor. Interestingly, the luminescence signal was significantly enhanced, with an approximately 54-fold enhancement in the emission intensity when the pH value was increased from 2 to 5, which is the typical behavior of pH probes. In addition, JXUST-29 can also be used as a luminescence sensor to detect l-arginine (Arg) and l-lysine (Lys) in an aqueous solution through fluorescence enhancement and the blue-shift effect. The detection limits were 0.023 and 0.077 μM, respectively. In addition, JXUST-29-based devices were designed and developed to facilitate detection. Importantly, JXUST-29 is also capable of detecting and sensing Arg and Lys in living cells.

Ligand as Buffer for Improving Chemical Stability of Coordination Polymers

Chemical stability is one of the key concerns in coordination polymers (CPs). However, technologies to protect CPs against acidic or alkaline aqueous environments have yet to be implemented. Herein we demonstrate an approach for improving the pH stability by utilizing the ligand salt as buffering site to modify the unsaturated coordination sites of CPs. For the selective one-dimensional CP Eu-d-DBTA (d-H₂DBTA = d-O,O'-dibenzoyltartaric acid) with a pH stability range of 6-8, the introduction of the ligand salt Na-d-DBTA extends the pH stability interval from 3 to 11. Crystallographic structure data reveal the formation of a Eu/Na-d-DBTA dynamic structure with Na-d-DBTA buffer sites on the Eu-O cluster of the Eu-d-DBTA skeleton. Benefiting from the dynamic single-crystal-to-single-crystal transformation, the buffer sites protect the skeleton from the impact of the acidic or alkaline aqueous environment. In addition, Eu/Na-d-DBTA produces stable photoluminescence properties and selective responses toward l-tryptophan (l-Trp) and further toward l-lysine (l-Lys) over the whole buffer capacity range of 3-11. Noticeably, other Ln/Na-d-DBTA CPs and star metal-organic frameworks also exhibit pH stability improvement when the ligand-as-buffer technology is used, which is significant for developing advanced inorganic-organic hybrid materials with superior functionality.

Stable terbium metal-organic framework with turn-on and blue-shift fluorescence sensing for acidic amino acids (L-aspartate and L-glutamine) and cations (Al3+ and Ga3+)

A terbium-based metal-organic framework, namely {[Tb₂(ADIP)(H₂ADIP)(HCOOH)(H₂O)₂]·2DMF·2H₂O}_n (Tb-MOF, H₄ADIP = 5,5'-(anthracene-9,10-diyl) diisophthalic acid), was synthesized and characterized. The single-crystal structure analysis shows that the Tb-MOF crystallizes in the C₂/_C space group in the monoclinic system and its asymmetric unit contains two Tb^III ions, one ADIP^4-, one H₂ADIP^2-, one coordinating formic acid and two coordination water molecules. Tb-MOF has a three-dimensional porous structure with a porosity of 41.5%. Tb-MOF is a highly selective and sensitive fluorescence turn-on and blue-shift sensor for L-aspartate (Asp), L-glutamine (Glu), Al³⁺ and Ga³⁺with detection limits of 0.25, 0.23, 0.069 and 0.079 μM, respectively. Experimental studies and theoretical calculations show that the sensing process is mainly attributed to the energy transfer and the absorbance caused enhancement (ACE) mechanism. Therefore, Tb-MOF is a good multi-response fluorescence sensor for acidic amino acids and Al³⁺, Ga³⁺cations.

Metal-Organic Framework-Based Selective Molecular Recognition of Organic Amines and Fixation of CO2 into Cyclic Carbonates

Synthesis and structural depiction of two new metal-organic frameworks (MOFs), namely, [{Zn(L)(oba)}·4H₂O]_α (Zn-MOF-1) and [{Cd_1/2(L)_1/2(nipa)_1/2(H₂O)_1/2}·(DMF)_1/2(H₂O)]_α (Cd-MOF-2) (where L = N²,N⁶-di(pyridin-4-yl)naphthalene-2,6-dicarboxamide, 4,4'-H₂oba = 4,4'-oxybisbenzoic acid, and 5-H₂nipa = 5-nitroisophthalic acid) are reported. Both Zn-MOF-1 and Cd-MOF-2 have been prepared by reacting ligand L and coligand 4,4'-H₂oba or 5-H₂nipa with the respective dihydrates of Zn(OAc)₂ and Cd(OAc)₂ (OAc = acetate). Crystal structure X-ray analysis discloses that Zn-MOF-1 displays an overall 2D → 3D interpenetrated framework structure. The topological analysis by ToposPro suggests a (4)-connected uninodal sql topology with a point symbol of {4⁴·6²} having 2D + 2D parallel polycatenation. However, crystal packing of Cd-MOF-2 adapted a porous framework architecture and was topologically simplified as (3,4)-connected binodal 2D net. In addition, both Zn-MOF-1 and Cd-MOF-2 were proved to be multifunctional materials for the recognition of organic amines and in the fixation of CO₂ to cyclic carbonates. Remarkably, Zn-MOF-1 and Cd-MOF-2 showed very good fluorescence stability in aqueous media and have shown 98 and 97% quenching efficiencies, respectively, for 4-aminobenzoic acid (4-ABA), among all of the researched amines. The mechanistic study of organic amines recognition proposed that fluorescence quenching happened mainly through hydrogen-bonding and π-π stacking interactions. Additionally, cycloaddition of CO₂ to epoxide in the presence of Zn-MOF-1 and Cd-MOF-2 afforded up to 96% of cyclic carbonate within 24 h. Both Zn-MOF-1 and Cd-MOF-2 exhibited recyclability for up to five cycles without noticing an appreciable loss in their sensing or catalytic efficiency.

Turn-on and blue-shift fluorescence sensor toward L-histidine based on stable CdII metal-organic framework with tetranuclear cluster units

A novel Cd^II-based two-fold interpenetrated metal-organic framework (MOF), namely {[Cd₂(BTDB)₂(4,4-bpy)]·DMF}_n (JXUST-14), (H2BTDB = 4,4'-(benzo[c][1,2,5]thiadiazole-4,7-diyl)dibenzoic acid and 4,4-bpy = 4,4-bipyridine), has been prepared and characterized. Single-crystal structure determination reveals that JXUST-14 has a tetranuclear cluster based 6-connected pcu topological network with Schlafli symbol {4¹²·6³}. When soaked in common organic solvents and aqueous solutions with diverse pH values of 2-12 for 48 h, JXUST-14 remains stable. JXUST-14 is a highly selective and sensitive luminescent sensor for L-histidine (His) with a detection limit of 11.1 ppm. JXUST-14 is the first Cd^II-based MOF for the detection of His via turn-on and fluorescence blue-shift effects. Experimental study and theoretical calculation suggest that the sensing process can be mainly attributed to a charge transfer and energy transfer mechanism. More interestingly, LED lamps of JXUST-14 and JXUST-14@His were successfully developed, which endowed efficient sensitivity for His detection and thus provide great potential for future applications.

Selective luminescent sensing of metal ions and nitroaromatics over a porous mixed-linker cadmium(ii) based metal–organic framework

A potential luminescent sensor based on porous metal organic framework for the detection of metal ions (Al3+, Fe3+ or Cr3+) and nitro-explosive, 2,4,6-tri-nitrophenol has been discovered. MOF is capable of detecting aqueous phase analyte through luminescent sensing.

Anion-controlled Zn(II) coordination polymers with 1-(tetrazo-5-yl)-3-(triazo-1-yl) benzene as an assembling ligand: synthesis, characterization, and efficient detection of tryptophan in water

Tryptophan regulates and participates in various physiological systems in the human body, and its excessive intake has harmful effects. Therefore, detecting and monitoring tryptophan in water and distinguishing it from other amino acids are necessary. In addition to their excellent luminescence, coordination polymer-based sensors have good stability and high sensitivity and selectivity for sensing applications. In this work, two luminescent coordination polymers (CPs), [Zn(ttb)Cl]_n (1) and [Zn₂(ttb)₂(OH)(NO₃)]_n (2), were obtained through the solvothermal reaction of different Zn(II) salts with a rarely studied multidentate N-donor ligand, 1-(tetrazo-5-yl)-3-(triazo-1-yl) benzene (Httb). Crystallographic investigations revealed that the structure of 1 exhibits a 2D fes net with Cl^- anions acting as terminal charge balancers, and that of 2 features a 3D ant net with NO₃^- anions in a rare monodentate bridging (μ₂-O-η¹:η¹) mode. In terms of stability tests, 2 has better thermal and water stability than 1. Although both show good fluorescence performance, specific tryptophan detection, and excellent anti-interference ability, 2 has higher K_SV (111 852.6 M^-1), a lower limit of detection (LOD = 23.6 nM), and a better recovery rate than 1. Cytotoxicity experiments proved that 2 has extremely low toxicity and thus has great potential for in vivo detection. Therefore, CP 2 is a suitable candidate for advanced practical applications for the efficient sensing of tryptophan in water. The luminescence of the ligands was also calculated using DFT theory and further discussed through experiments. The quenching mechanism that occurs after tryptophan addition was explored through Hirshfeld surface analysis.

Recyclable europium functionalized metal-organic fluorescent probe for detection of tryptophan in biological fluids and food products

An europium functionalized metal-organic fluorescent probe, Eu³⁺@UiO-66-FDC was constructed by post-synthetic modification through coordination interactions. Eu³⁺@UiO-66-FDC displayed high selectivity and sensitivity toward Tryptophan (Trp) among all the 20 natural amino acids and other general compounds in food and biological samples, with a wide linear concentration range (0-1000 μM), low detection limit (0.29 μM), and a rapid response (<1 min). Besides, this probe was utilized to detect Trp in rabbit blood serum and milk samples with good recoveries, which were verified by high-performance liquid chromatography (HPLC). Notably, this fluorescent probe proved to be a recyclable material. Hence, this work provides a reliable and recyclable fluorescent probe applicable toward the detection of Trp in biological fluids and/or food products.

A Dual-emitting Two-dimensional Nickel-based Metal-organic Framework Nanosheets: Eu3+/Ag+ Functionalization Synthesis and Ratiometric Sensing in Aqueous Solution

Using two-dimensional (2D) nickel-based metal organic framework (Ni-MOF) nanosheets as a matrix, Eu³⁺ and Ag⁺ were incorporated to synthesize Ag/Eu@Ni-MOF with double luminescence centers of Eu³⁺ ion (615 nm) and organic ligand (524 nm). And a ratiometric luminescence sensor is constructed based on Ag/Eu@Ni-MOF for sensitive detection of biothiols in aqueous solutions. The dual-emissive fluorescence properties can be tuned by changing the amounts of Ag⁺ ions doping. The results of temperature and pH effects on the fluorescence of Ag/Eu@Ni-MOF indicates that the Ag/Eu@Ni-MOF is a temperature-sensitive material and the fluorescence of Ag/Eu@Ni-MOF can keep stable over a wide pH range. Due to the binding of -SH in cysteine (Cys) and glutathione (GSH) with Ag⁺, the ligand luminescence was significantly inhibited by weakening the Ag + influence on the energy transfer process in the MOFs. Therefore, ratiometric fluorescent sensing of biomolecular thiols was realized based on the dual-emission Ag/Eu@Ni-MOF. More importantly, the fluorescence color change can be observed with naked eyes to realize visual detection. The ratiometric fluorescent sensor exhibits high performance for Cys and GSH detection with a wide linear range of 5-250 µM and a relatively low detection limit of 0.20 µM and 0.17 µM, respectively. Furthermore, the biothiols content in human serum was determined with satisfactory results. It proves the Ni-MOF nanosheets can be used as a stable matrix for construction luminescent MOFs for the first time, and validate the great potential of Ag/Eu@Ni-MOF as a ratiometric fluorescent probe for point-of-care testing (POCT) in disease diagnosis.

A hydrostable samarium(III)-MOF sensor for the sensitive and selective detection of tryptophan based on a "dual antenna effect"

Tryptophan (Trp) is one of the essential amino acids, which plays important roles in biological systems and the normal growth of human beings, and it is of great significance to be able to detect Trp in a rapid, efficient, and sensitive way. Herein, a 3D network metal-organic framework ([Sm₂(BTEC)_1.5(H₂O)₈]·6H₂O) with excellent thermal and water stability was synthesized by a hydrothermal method. Interestingly, it could discriminate Trp from other natural amino acids in aqueous solution through a significant fluorescence enhancement effect, and showed high detection sensitivity (LOD = 330 nM) and outstanding anti-interference ability. The sensor system was successfully applied to the detection of Trp in practical samples, so it was expected to be a sensitive and efficient Trp sensor. In addition, the sensing mechanism was explained in detail by a series of characterization methods combined with density functional theory (DFT). There were many coordination water molecules in the crystal structure of the complex. Based on the small steric hindrance and molecular structure of water molecules, it provided the possibility for coordination interaction between Trp and Sm³⁺. On the other hand, the triplet energy level (T1) of Trp matched with the ⁴G_5/2 vibrational energy level of Sm³⁺, so Trp could be used as the second "antenna molecule" besides 1,2,4,5-benzenetetracarboxylic acid (H₄BTEC). Therefore, it effectively broadened the way for Sm-MOF to absorb excitation light.

Na-Ln Heterometallic Coordination Polymers: Structure Modulation by Na+ Concentration and Efficient Detection to Tetracycline Antibiotics and 4-(Phenylazo)aniline

On the basis of the lanthanide metalloligand [Ln(ODA)₃]^3- (H₂ODA = oxydiacetic acid), three new Na-Ln heterometallic coordination polymers, [Ln(ODA)₃Na₂]_n [Ln = Eu (1) and Gd (2)] and [Tb(ODA)₃Na₃(H₂O)₂]_n (3), had been assembled by adjusting the concentration of Na⁺ ions in the reaction system. The investigations of fluorescence sensing showed that 1 could be a ratiometric probe to detect tetracycline (TC) and oxytetracycline (OTC) with high sensitivity and low detection limits, 71.92 ppb for the former and 45.54 ppb for the latter, and 3 could selectively sense 4-(phenylazo)aniline through the turn-off pathway with 14.59 ppb of detection limits. Moreover, the competing and circulating experiments indicated that both 1 and 3 had satisfactory antiinterference and recyclability for the corresponding analytes. All of these results implied that 1 and 3 should be potential fluorescent sensors for the detection of TC/OTC and 4-(phenylazo)aniline, and the possible sensing mechanism had also been discussed in depth.

Recent Advances in Developing Lanthanide Metal-Organic Frameworks for Ratiometric Fluorescent Sensing

Fluorescent probes have attracted special attention in developing optical sensor systems due to their reliable and rapid fluorescent response upon reaction with the analyte. Comparing to traditional fluorescent sensing systems that employ the intensity of only a single emission, ratiometric fluorescent sensors exhibit higher sensitivity and allow fast visual screening of analytes because of quantitatively analyzing analytes through the emission intensity ratio at two or more wavelengths. Lanthanide metal–organic frameworks (LnMOFs) are highly designable multifunctional luminescent materials as lanthanide ions, organic ligands, and guest metal ions or chromophores are all potential sources for luminescence. They thus have been widely employed as ratiometric fluorescent sensors. This mini review summarized the basic concept, optical features, construction strategies, and the ratiometric fluorescent sensing mechanisms of dual-emitting LnMOFs. The review ends with a discussion on the prospects, challenges, and new direction in designing LnMOF-based ratiometric fluorescent sensors.

An acetoxy functionalized Al(III) based metal-organic framework showing selective "turn on" detection of perborate in environmental samples

Here, we have described the design, preparation and detailed characterization of a new acetoxy functionalized aluminium based metal-organic framework (MOF) called CAU-10-OCOCH3 (1) (CAU stands for Christian-Albrechts-University). The desolvated compound was employed for the detection of perborate in a pure aqueous environment. The presented MOF based perborate sensing probe (1) was synthesized by employing 5-acetoxyisophthalic acid and AlCl3·6H2O as the linker molecule and metal salt source, respectively, in DMF/H2O medium at 120 °C for 12 h. The material (1') showed a very selective fluorescent turn-on response towards perborate in aqueous medium with the coexistence of several competitive analytes. A dramatic increment (65 fold) in emission intensity of the probe was observed within 5 min of the addition of perborate. A chemo-selective reaction between perborate and the acetoxy functionality and subsequent hydrolysis of the acetoxy group to the hydroxy group is the main cause of the turn-on nature of detection. The material showed a detection limit of 1.19 μM. The probe was also applied for the recognition of perborate in several environmental water samples. The material is the first ever MOF based probe for selective detection of perborate.

A dual luminescent sensor coordination polymer for simultaneous determination of ascorbic acid and tryptophan

Simultaneous high sensitivity detection of biomolecules is important for research in medicine, living cells and environmental samples. In this work, a water stable coordination polymer, [Cd₂(bptc)(4,4'-bpy)(H₂O)₃]ˑH₂O 1 (H₄bptc = 2,3,3',4'-biphenyl tetracarboxylic acid, 4,4'-bpy = 4,4'-bipyridine), was designed and successfully synthesized as a luminescent sensor for simultaneous recognition of Ascorbic Acid (AA) and L-Tryptophan (L-Trp) based on luminescent -OFF and -ON, respectively. Importantly, the proposed sensing system showed an excellent performance with high K_SV values of 4.85 × 10⁴ M^-1, 9.60 × 10⁷ M^-1 and low limit of detection (LOD) of 0.28 nM, 63 nM, respectively. In addition, the probable mechanisms are also discussed. The luminescent quenching behavior by AA can be mainly attributed to the static resonance energy transfer between complex 1 and the analytes. Whereas the enhancing effect of L-Trp comes from the intrinsic strong luminescence for L-Trp itself and photo-competitive mechanism between CP 1 sensor and L-Trp, supposedly. In addition, the repeatability of both systems were also investigated.

Conversion from Heterometallic to Homometallic Metal-Organic Frameworks

Two new heterometallic metal-organic frameworks (MOFs), LnZnTPO 1 and 2, and two homometallic MOFs, LnTPO 3 and 4 (Ln=Eu for 1 and 3, and Tb for 2 and 4; H₃ TPO=tris(4-carboxyphenyl)phosphine oxide) were synthesized, and their structures and properties were analyzed. They were prepared by solvothermal reaction of the C₃ -symmetric ligand H₃ TPO with the corresponding metal ion(s) (a mixture of Ln³⁺ and Zn²⁺ for 1 and 2, and Ln³⁺ alone for 3 and 4). Single-crystal XRD (SXRD) analysis revealed that 1 and 3 are isostructural to 2 and 4, respectively. TGA showed that the framework is thermally stable up to about 400 °C for 1 and 2, and about 450 °C for 3 and 4. PXRD analysis showed their pore-structure distortions without noticeable framework-structure changes during drying processes. The shapes of gas sorption isotherms for 1 and 3 are almost identical to those for 2 and 4, respectively. Solvothermal immersion of 1 and 2 in Tb³⁺ and Eu³⁺ solutions resulted in the framework metal-ion exchange affording 4 and 3, respectively, as confirmed by photoluminescence (PL), PXRD, IR, inductively coupled plasma atomic emission spectroscopy (ICP-AES), and energy-dispersive X-ray (EDX) analyses.

Uranyl Organic Framework as a Highly Selective and Sensitive Turn-on and Turn-off Luminescent Sensor for Dual Functional Detection Arginine and MnO4. Inorg Chem 2020;59:5004-5017. [PMID: 32207299 DOI: 10.1021/acs.inorgchem.0c00236]

Five new uranyl coordination polymers were prepared by the hydrothermal method based on 5-nitroisophthalic acid (H₂nip) as (UO₂)(nip)(2,2'-bpy) (1), (H₂4,4'-bpy)·[(UO₂)₃(nip)₄]·(4,4'-bpy) (2), (H₂bpe)·[(UO₂)_0.5(nip)] (3), (H₂ bpp)·[(UO₂)₂-(nip)₃]·H₂O (4), and (H₂tmp)·[(UO₂)(nip)₂](5) [2,2'-bpy = 2,2'-bipyridine, 4,4'-bpy = 4,4'-bipyridine, bpe = 4,4'-vinylenedipyridine, bpp = 4,4' -trimethylenedipyridine, tmp = tetramethylpyrazine]. All of these synthesized complexes have been characterized by single crystal and powder X-ray diffraction, IR spectra, thermogravimetric analysis, elemental analysis, and luminescent properties. In particular, it is found that compounds 1 and 4 can be used as a luminescent sensor to efficiently detect arginine in aqueous solution by means of "turn-on"; the detection limits were 1.06 × 10^-6 and 6.42 × 10^-6 mol/L, respectively. Moreover, 4 can also be used as a bifunctional sensor for selective sensing of MnO₄^- anion by "turn-off". The detection limit of MnO₄^- in water was 1.79 × 10^-6 mol/L; the K_sv was 1.88 × 10⁴. The sensing effect of arginine in simulated grape juice samples and MnO₄^- in simulated river water samples was also investigated by this sensing system with high recovery. In addition, the possible mechanism of sensing arginine and MnO₄^- in the aqueous solution was discussed.

Recent Progress on Luminescent Metal-Organic Framework-Involved Hybrid Materials for Rapid Determination of Contaminants in Environment and Food

The high speed of contaminants growth needs the burgeoning of new analytical techniques to keep up with the continuous demand for monitoring and legislation on food safety and environmental pollution control. Metal-organic frameworks (MOFs) are a kind of advanced crystal porous materials with controllable apertures, which are self-assembled by organic ligands and inorganic metal nodes. They have the merits of large specific surface areas, high porosity and the diversity of structures and functions. Latterly, the utilization of metal-organic frameworks has attracted much attention in environmental protection and the food industry. MOFs have exhibited great value as sensing materials for many targets. Among many sensing methods, fluorometric sensing is one of the widely studied methods in the detection of harmful substances in food and environmental samples. Fluorometric detection based on MOFs and its functional materials is currently one of the most key research subjects in the food and environmental fields. It has gradually become a hot research direction to construct the highly sensitive rapid sensors to detect harmful substances in the food matrix based on metal-organic frameworks. In this paper, we introduced the synthesis and detection application characteristics (absorption, fluorescence, etc.) of metal-organic frameworks. We summarized their applications in the MOFs-based fluorometric detection of harmful substances in food and water over the past few years. The harmful substances mainly include heavy metals, organic pollutants and other small molecules, etc. On this basis, the future development and possible application of the MOFs have prospected in this review paper.

In Situ Ligand Formation-Driven Synthesis of a Uranyl Organic Framework as a Turn-on Fluorescent pH Sensor

A uranium-based metal-organic framework, [(UO₂)(H₂DTATC)] (HNU-39, H₄DTATC = 5,5'-(9,10-dihydroxy-4a,9,9a,10-tetrahydroanthracene-9,10-diyl)diisophthalic acid) was successfully prepared by a hydrothermal method. The structure of HNU-39 comprises UO₈ hexagonal bipyramids linked by doubly protonated DTATC ligands, forming a ribbon arrangement. It is worth noting that the DTATC ligand was transformed in situ from 5,5'-(anthracene-9,10-diyl)diisophthalic acid (H₄DPATC) during the synthesis of HNU-39. Research on fluorescence properties has shown that HNU-39 exhibits fluorescence turn-on response under alkaline conditions and could be used as a potential pH sensor. Moreover, HNU-39 can also be successfully applied for pH sensing in real samples from a sewage treatment plant. The sensing mechanism can be interpreted as OH^- ions reacting with the protons in the organic ligand of HNU-39.

A luminescent terbium coordination polymer as a multifunctional water-stable sensor for detection of Pb2+ ions, PO43− ions, Cr2O72− ions, and some amino acids

It is the first Ln-CP fluorescence probe for synchronous determination of Tyr and Trp in the presence of other amino acids.

Fluorescent "Turn-on" Sensing Based on Metal-Organic Frameworks (MOFs)

Metal-organic frameworks (MOFs) have evolved as an exciting class of materials in the domain of porous materials. The unique features of these materials arise from the combined properties of metal ions/clusters and organic struts which form the building blocks of these fascinating architectures. Among other multifarious applications, MOFs have shown tremendous applications as sensory materials for a wide variety of species. The signal transduction induced mechanism in these confined nanospaces generate optical output in response to a particular analyte which can be detected by wide variety of detection techniques. Fluorometric methods of sensing is one of widely studied method over past few decades. MOF-based fluorometric detection is a key research theme developed over the past few years. In this review, we give a brief overview of the recent developments of MOFs as "turn-on" sensors for a wide range of analytes (viz. cations, anions, volatile organic compounds (VOCs), etc.).

Two Lanthanide Metal⁻Organic Frameworks Based on Semi-Rigid T-Shaped Tricarboxylate Ligand: Syntheses, Structures, and Properties

By using a semi-rigid tripodal ligand 5-(4-carboxybenzyloxy)isophthalic acid (H3L) and lanthanide metal ions (Nd3+, Tb3+), two novel lanthanide metal-organic frameworks, namely, {[Nd2L2(DMF)4] DMF}n (1), and {TbL(DMF)(H2O)}n (2), were synthesized under mild solvothermal conditions and structurally characterized by X-ray single crystal diffraction. Compounds 1 and 2 are isostructural, in which L3- ligands linked dinuclear lanthanide metal-carboxylate units to form non-interpenetrated 3D network with (3,6)-connected topology. Luminescent investigations reveal that compound 1 displays the near-infrared emission at room temperature, and compound 2 can be employed as selective probe for Cr2O72- anion in aqueous solution based on luminescence quenching. Moreover, compound 2 exhibits catalytic activity for cyclo-addition of CO2 and epoxides under relatively mild conditions.