Sub-zero temperature mechanically stable low molecular weight hydrogels

Anti-freezing starch hydrogels with superior mechanical properties and water retention ability for 3D printing

As a novel material that can be used at subzero temperatures, anti-freezing hydrogels have been attracting extensive attention. Inspired by the freeze-tolerance phenomenon in seawater, which is achieved by mixing salts into water, an ionic compound (CaCl₂) was used to gelatinize starch to form anti-freezing hydrogels. Native potato starch (NPS) anti-freezing hydrogels were formed at -10 °C, -18 °C, -30 °C, and - 50 °C with 6-9 kPa tensile strength and 100-230% elongation at break. The compressive stress of anti-freezing hydrogels at different environmental temperatures increased from 18.586 kPa to 36.551 kPa with the glass transform temperature of starch hydrogels dropped to -50 °C. The anti-freezing hydrogels showed excellent water retention ability, which could maintain a water content of 55% after 7 days at ambient temperature. The prototyping of anti-freezing starch hydrogels broadens the applications of starch in food, adhesives, medical materials, and intelligent materials.

Bioinspired organohydrogels with heterostructures: Fabrications, performances, and applications

Since emerging in 1960, the artificial hydrogels have garnered enormous attentions in scientific community due to their high level of similarities to biological soft tissues in both structures and properties. With the proceeding of research, the concern of hydrogels is gradually shifted from fundamental investigation to abundant functionalization. In contrast to the natural soft tissues, the current artificial hydrogels still possess relatively simple structures and unsatisfactory environmental adaptability, extremely limiting their practical applications in complex environments. Enlightened by the prominent adaptability of biological organisms, the binary cooperative complementary principle is utilized to develop bioinspired organohydrogels by combining two components with opposite but cooperative physiochemical features. The present review provides the advanced progresses of bioinspired organohydrogels with sophisticated heterogeneous networks and desirably environmental adaptabilities. We clearly summarize the synthesizing strategies in regard to both corresponding mechanisms and typical examples, including macroscopic organohydrogels, organohydrogels with binary solvent, organohydrogels with heteronetworks, and emulsion-based organohydrogels. Meanwhile, the intriguing features of the reported organohydrogels, such as temperature resistance, switchable mechanics, adaptive wettability, and opposite components compatibility, are also clearly highlighted with a short overview of their promising applications. Ultimately, the current challenges and perspectives on the future development of bioinspired organohydrogels are also discussed.

Topology Reliable LCST-Type Behavior of ABA Triblock Polymer and Influence on Water Condensation and Crystallization

As a kind of smart material, thermoresponsive hydrogels are widely investigated and applied in many fields. Due to the limitation of the freezing temperature of the water, it is a challenge to further broaden their sol-gel transition temperature (T_gel ) range, especially below 0 °C. Herein, the lower critical solution temperature type of amphiphilic ABA triblock copolymers, synthesized via two-step reversible addition-fragmentation chain transfer (RAFT) polymerization is demonstrated. The hydrophilic A-block and the hydrophobic B-block are composed of poly(N,N-dimethylacrylamide) (PDMAA) and poly(diacetone acrylamide) (PDAAM), respectively. The degree of polymerization (DP) of both A-block and B-block shows a significant influence on the T_gel of triblock copolymer dispersion. By changing the length of these two blocks or physically blending these copolymers dispersions, the T_gel can be well adjusted in a temperature range from 45 to -10 °C. Moreover, When the T_gel is higher than 4 °C, the triblock copolymer coatings show a good anti-fogging property. And when the T_gel is around or lower than the freezing temperature of the water, aqueous dispersions of the triblock copolymer have an ice recrystallization inhibition activity, resulting in the decrease of average maximum grain size (MLGS) of ice crystal.

Pseudocapacitive behaviour in sol-gel derived electrochromic titania nanostructures

Nanostructured thin films are widely investigated for application in multifunctional devices thanks to their peculiar optoelectronic properties. In this work anatase TiO₂ nanoparticles (average diameter 10 nm) synthesised by a green aqueous sol-gel route are exploited to fabricate optically active electrodes for pseudocapacitive-electrochromic devices. In our approach, highly transparent and homogeneous thin films having a good electronic coupling between nanoparticles are prepared. These electrodes present a spongy-like nanostructure in which the dimension of native nanoparticles is preserved, resulting in a huge surface area. Cyclic voltammetry studies reveal that there are significant contributions to the total stored charge from both intercalation capacitance and pseudocapacitance, with a remarkable 50% of the total charge deriving from this second effect. Fast and reversible colouration occurs, with an optical modulation of ∼60% in the range of 315-1660 nm, and a colouration efficiency of 25.1 cm² C^-1 at 550 nm. This combination of pseudocapacitance and electrochromism makes the sol-gel derived titania thin films promising candidates for multifunctional 'smart windows'.

Aqueous Rechargeable Metal-Ion Batteries Working at Subzero Temperatures

Aqueous rechargeable metal-ion batteries (ARMBs) represent one of the current research frontiers due to their low cost, high safety, and other unique features. Evolving to a practically useful device, the ARMBs must be adaptable to various ambient, especially the cold weather. While much effort has been made on organic electrolyte batteries operating at low temperatures, the study on low-temperature ARMBs is still in its infancy. The challenge mainly comes from water freezing at subzero temperatures, resulting in dramatically retarded kinetics. Here, the freezing behavior of water and its effects on subzero performances of ARMBs are first discussed. Then all strategies used to enhance subzero temperature performances of ARMBs by associating them with battery kinetics are summarized. The subzero temperature performances of ARMBs and organic electrolyte batteries are compared. The final section presents potential directions for further improvements and future perspectives of this thriving field.