Advances in ionic liquids as fluorescent sensors

Ionic liquids (ILs) are a class of liquid salts with characteristics such as a low melting point, an ionic nature, non-volatility, and tunable properties. Because of their adaptability, they have a significant influence in the field of fluorescence. This paper reviews the primary literature on the use of ILs in fluorescence sensing technologies. The kind of target material is utilized to classify the fluorescence sensors made with the use of ILs. They include using ILs as probes for metals, nitro explosives, small organic compounds, anions, and gases. The efficacy of an IL-based fluorescence sensor depends on the precise design to guarantee specificity, sensitivity, and a consistent reaction to the desired analyte. The precise method can differ depending on the chemical properties of the IL, the choice of fluorophore, and the interactions with the analyte. Overall, the viability of the aforementioned materials for chemical analysis is evaluated, and prospective possibilities for further development are identified.

Facile synthesis of non-modified yellow emission silicon quantum dots and their visualization of hydrogen sulfide in living cells and onion tissues

Yellow fluorescent silicon quantum dots (y-SiQDs) with 22.2% fluorescence quantum yield were synthesized by a simple hydrothermal method using 3-glycidoxypropyl triethoxysilane (GOTS) and m-aminophenol. The excitation wavelength is 550 nm with an emission wavelength of 574 nm, which effectively avoids the interference of biological autofluorescence. Notably, the synthesis approach does not require any post-modification and the y-SiQDs can be directly used for hydrogen sulfide (H₂S) quantification due to static quenching. It exhibits high sensitivity and excellent selectivity for H₂S with a 0.2-10 μM (R² = 0.9953) linear range and detection limit of 54 nM. y-SiQDs have excellent stability and biocompatibility and can be used for H₂S imaging in living cells and onion tissues.

Water Soluble Silicon Nanoparticles as a Fluorescent Probe for Highly Sensitive Detection of Rutin

In this work, water-soluble fluorescent silicon nanoparticles (SiNPs) were prepared by one-pot hydrothermal method using 3-(2-aminoethylamino)propyldimethoxymethylsilane (AEAPDMMS) as a silicon source and amidol as a reducing agent. The prepared SiNPs showed bright green fluorescence, excellent stability against photobleaching, salt tolerance, temperature stability, and good water solubility. Due to the internal filtration effect (IFE), rutin could selectively quench the fluorescence of the SiNPs. Based on such phenomena, a highly sensitive fluorescence method was established for rutin detection. The linear range and limit of detection (LOD) were 0.05-400 μM and 15.2 nM, respectively. This method was successfully applied to detect rutin in the samples of rutin tablets, Sophora japonica, fry Sophora japonica, and S. japonica carbon with satisfactory recovery.

Synthesis of sulfhydryl functionalized silicon quantum dots with high quantum yield for imaging of hypochlorite in cells and zebrafish

Sulfhydryl functionalized silicon quantum dots (S-SiQDs) with a fluorescence quantum yield of 38.5% were synthesized using 3-mercaptopropyltrimethoxysilane (MPTMS) and m-phenylenediamine by a simple one-pot method. It is worth noting that by oxidizing the surface sulfhydryl groups and statically quenching, the fluorescence of S-SiQDs at 492 nm (excitation at 383 nm) can be selectively quenched by hypochlorite (ClO^-) in a linear range of 0.05 to 1.8 μM with a low detection limit of 13 nM. The reaction was completed in 10 s with no interference from other ROS, metal ions, anions and reducing species. The silicon source containing sulfhydryl groups was used to synthesize silicon quantum dots for the first time, and the surface of the S-SiQDs was provided with sulfhydryl groups and reacted rapidly and sensitively with ClO^-. The S-SiQDs have good photostability and biocompatibility, and can be further used for ClO^- imaging in MCF-7 cells and zebrafish, showing great promise in biological imaging. The proposed assay demonstrates that 3-mercaptopropyltrimethoxysilane is a good choice to obtain a functionalized fluorescent nanoprobe for redox species.

Antenna effect of pyridoxal phosphate on the fluorescence of mitoxantrone-silicon nanoparticles and its application in alkaline phosphatase assay

As a kind of sensing and imaging fluorescent probe with the merit of low toxicity, good stability, and environment-friendly, silicon nanoparticles (SiNPs) are currently attracting extensive research. In this work, we obtained mitoxantrone-SiNPs (MXT-SiNPs) with green emission by one-pot synthesis under mild temperature condition. The antenna based on pyridoxal phosphate (PLP) was designed for light-harvesting to enhance the luminescence of MXT-SiNPs and to establish a novel sensing strategy for alkaline phosphatase (ALP). PLP transfers the absorbed photon energy to MXT-SiNPs by forming Schiff base. When PLP is dephosphorized by ALP, the released free hydroxyl group reacts with aldehyde group to form internal hemiacetal, which leads to the failure of Schiff base formation. Based on the relationship between antenna formation ability and PLP hydrolysis degree, the activity of ALP can be measured. A good linear relationship was obtained from 0.2 to 3.0 U/L, with a limit of detection of 0.06 U/L. Furthermore, the sensing platform was successfully used to detect ALP in human serum with recovery of 97.6-106.2%. The rational design of antenna elements for fluorescent nanomaterials can not only provide a new pathway to manipulate the luminescence, but also provide a new direction for fluorescence sensing strategy.

A dual-signal sensing strategy based on ratiometric fluorescence and colorimetry for determination of Cu2+ and glyphosate

Herein, a dual-signal sensing strategy based on ratiometric fluorescence and colorimetry for Cu²⁺ and glyphosate determination was constructed. Fluorescence silicon nanoparticles (SiNPs) were prepared by hydrothermal reaction, which has maximum fluorescence intensity under the excitation of 355 nm. o-Phenylenediamine (OPD) was oxidized through Cu²⁺ to generate 2,3-diaminophenazine (oxOPD). The obtained oxOPD showed a strong absorption peak at 417 nm and quenched the fluorescence of SiNPs at 446 nm due to fluorescence resonance energy transfer (FRET). Meanwhile, oxOPD produced a new fluorescence emission at 556 nm forming a ratiometric state. With increasing Cu²⁺, the original solution changed from colorless to yellow. When glyphosate was present, the interaction between Cu²⁺ and the functional groups of glyphosate could reduce the oxidation of oxOPD, resulting in the enhancement of fluorescence at 446 nm and the decrease of fluorescence at 556 nm. Furthermore, the addition of glyphosate changed yellow solution to colorless. Under the optimal conditions of OPD (1 mM), 20 mM Tris-HCl buffer (pH 7.5), and incubation time (4 h), the ratiometric fluorescence sensor had good selectivity and showed a wide linear range of 0.025-20 μM with the LOD of 0.008 μM for Cu²⁺ and 0.15-1.5 μg/mL with the LOD of 0.003 μg/mL for glyphosate, respectively. Besides, it is worth mentioning that this developed sensing system showed good performance in real samples, providing a simple and reliable dual-signal detection strategy.

Nitrogen-rich silicon quantum dots: facile synthesis and application as a fluorescent "on-off-on" probe for sensitive detection of Hg2+ and cyanide ions

The sensitive and reliable detection of Hg²⁺ and CN^- as harsh environmental contaminants are of great importance. In view of this, a novel "on-off-on" fluorescent probe based on nitrogen-rich silicon quantum dots (NR-SiQDs) has been designed for sensitive detecting Hg²⁺ and CN^- ions in aqueous media. NR-SiQDs were synthesized by a facile, one-step, and environment friendly procedure in the presence of 3-aminopropyl trimethoxysilane (APTMS) and ascorbic acid (AA) as precursors, with L-asparagine as a nitrogen source for surface modification. The NR-SiQDs exhibited strong fluorescence emission at 450 nm with 42.34% quantum yield, satisfactory salt tolerance, and superior photo- and pH-stability. The fluorescence emission was effectively quenched by Hg²⁺ (turn off) due to the formation of a non-fluorescent stable NR-SiQDs/Hg²⁺ complex while after the addition of cyanide ions (CN^- ), Hg²⁺ ions can be leached from the surface of the NR-SiQDs and the fluorescence emission intensity of the quenched NR-SiQDs fully recovered (turn on) due to the formation of highly stable [Hg (CN)₄ ]^2- species. After optimizing the response conditions, the obtained limits of detection were found to be 53 nM and 0.46 μM for Hg²⁺ and CN^- , respectively. Finally, the NR-SiQDs based fluorescence probe was utilized to detect Hg²⁺ and CN^- ions in water samples and satisfactory results were obtained, suggesting its potential application for environmental monitoring.

A redox reversible endoplasmic reticulum-targeted fluorescent probe for revealing the redox status of living cells

The endoplasmic reticulum (ER) is one of the most important organelles in cells and is involved in protein synthesis, folding and orderly transport. Redox balance is the key to its normal function. In this work, we designed and synthesized an endoplasmic reticulum-targeted fluorescent probe N-Se with selenomorpholine as the redox reversible detection moiety. N-Se could selectively respond to ClO^- within only 8 s with a LOD of 28.8 nM. Furthermore, such a response is reversible in the regulation of GSH. Confocal fluorescence imaging confirmed the excellent endoplasmic reticulum targeting ability of N-Se. Thus, it could real-time monitor the dynamic changes of the redox status in the endoplasmic reticulum through the variation of the fluorescence intensity.

Synthesis of biocompatible and highly fluorescent N-doped silicon quantum dots from wheat straw and ionic liquids for heavy metal detection and cell imaging

Silane-based precursors for the synthesis of water-dispersible silicon quantum dots (SiQDs) present harmful effects on both researchers and the environment, due to their high toxicity. Though waste wheat straw is an abundant source of natural silicon, its application towards the synthesis of biocompatible SiQDs for metal detection has not yet been explored. In this study, N-doped SiQDs demonstrating uniform spherical morphologies, excellent water dispersity and strong fluorescence emission with a quantum yield of 28.9% were facilely synthesized by using wheat straw (WS) as silicon source and allyl-3-methylimidazolium chloride (AMIMCl) as nitrogen source. The wheat straw based SiQDs (WS-SiQDs) showed linear fluorescence quenching ((F₀-F)/F) with Cr(VI) and Fe(III) concentration in the range of 0-6 × 10^-4 M. Following immobilization on hydrophilic silica hydrogels, WS-SiQDs@silica hydrogels demonstrated enhanced fluorescence emission which can selectively detect Cr(VI) and Fe (III) to the limits of 142 and 175 nM, respectively. Moreover, cell imaging results reflected that WS-SiQDs can penetrate the membranes of dental pulp stem cells and react with the nucleuses of the stem cells. The stem cells maintained high viability under the conditions of 24 h incubation and SiQD concentration below 50 mg·L^-1, thus indicating low cytotoxicity of WS-SiQDs. The as-prepared SiQDs demonstrated notable structural and fluorescent properties, therefore representing promising biocompatible fluorescent nanomaterials for metal detection and cell imaging.

Revisiting imidazolium receptors for the recognition of anions: highlighted research during 2010-2019

Imidazolium based receptors selectively recognize anions, and have received more and more attention. In 2006 and 2010, we reviewed the mechanism and progress of imidazolium salt recognition of anions, respectively. In the past ten years, new developments have emerged in this area, including some new imidazolium motifs and the identification of a wider variety of biological anions. In this review, we discuss the progress of imidazolium receptors for the recognition of anions in the period of 2010-2019 and highlight the trends in this area. We first classify receptors based on motifs, including some newly emerging receptors, as well as new advances in existing receptor types at this stage. Then we discuss separately according to the types of anions, including ATP, GTP, DNA and RNA.

Real-time monitoring of intracellular pH in live cells with fluorescent ionic liquid

Real-time monitoring of intracellular pH is of great significance due to its essential role in physiological and pathological processes. In present work, the ionic liquid (IL) N-methyl-6-hydroxyquinolinium bis(trifluoromethylsulfonyl) imide ([6MQc][NTf₂]) is proposed as a fluorescence probe for the quantitative imaging of intracellular pH in response to external stimuli. The fluorescence of the IL [6MQc][NTf₂] exhibits a sensitive response to pH variations, as the deprotonation of [6MQc][NTf₂] generates the highly fluorescent zwitterionic product [6MQz]. pH fluctuations in the range of 6.0-7.5 can be accurately sensed by monitoring the fluorescence change at 555 nm. Moreover, this IL probe exhibits favorable biocompatibility, excellent anti-photobleaching properties, and high tolerance to ionic strength. Using the IL probe, real-time sensing of hypoxia- and drug-induced intracellular pH changes in MCF-7 cells is achieved.

Targeted Development of Sustainable Green Catalysts for Oxidation of Alcohols via Tungstate-Decorated Multifunctional Amphiphilic Carbon Quantum Dots

Achieving green and sustainable chemical processes by replacing organic solvents with water has always been one of the green chemistry goals and a challenging topic for chemists. However, the poor solubility of organic materials is a major limitation to achieving this goal, especially in alcohol oxidation. In this contribution, the development and design of amphiphilic catalysts via abundant, safe, cheaper, and more biocompatible sources have received notable attention. To this purpose, herein, our group successfully synthesized a new multifunctional amphiphilic carbon quantum dot (CQD) composed of 1-aminopropyl-3-methyl-imidazolium chloride ([APMim][Cl]), dodecylamine (DDA), and citric acid (CA) (denoted as CQDs@DDA-IL/Cl) using a one-pot hydrothermal route. The CQDs@DDA-IL/Cl was then utilized as an amphiphilic stabilizer for anchoring tungsten ions using an anion-exchange method (marked as CQDs@DDA-IL/W). The CQDs@DDA-IL/W as a reusable catalyst selectivity mediated the oxidation of alcoholic substrates with stoichiometric H₂O₂ in water solvent. The extraordinary performance of our catalyst was attributable to the coexistence of ionic liquid (IL) and DDA upon the surface of the CQDs@DDA-IL/W, which plays a main duty in the hydrophobic/hydrophilic balance, and significantly increase the catalyst compatibility in the aqueous medium with the purpose of removing organic solvents. As a result, the great mass transfer occurs in the two-phase medium using this amphiphilic nanocatalyst without any phase transfer catalyst (PTC) or other additives. The 100% selectivity, excellent turnover number (TON) and turnover frequency (TOF), high yield, almost complete and fast conversion of alcohol to the desired aldehydes and ketones without more oxidation, and easy and no-trouble isolation of product and catalyst are outstanding features of this catalytic system.

A facile synthesis of hybrid silicon quantum dots and fluorescent detection of bovine hemoglobin

A new type of hybrid SiQDs was synthesized with a higher nitrogen content, fluorescence intensity and longer fluorescence lifetime.

A dual-responsive fluorescent sensor for Hg2+ and thiols based on N-doped silicon quantum dots and its application in cell imaging

An on–off–on fluorescent sensor based on N-SiQD has the advantages of fast response time and high sensitivity to Hg²⁺ and GSH.