A nanochitin-drived natural biological adhesive with high cohesive for wound healing

The weak cohesive strength of tissue adhesives hinders their practical applications. To overcome this challenge, we develop a green bio-adhesive that balances both cohesion and adhesion, drawing inspiration from the natural adhesion mechanisms of mussels. This bio-adhesive, referred to as OTS, was ingeniously crafted through the co-assembly of multi-surface-charged chitin nanofibers (OAChN) and tannic acid (TA), integrated with silk fibroin (SF), resulting in a material with enhanced cohesive strength and robust adhesive properties. The adhesive achieved significant cohesion through hydrogen-bonded crosslinking among OAChN, SF, and TA, boasting a tensile strength of 24.53 KPa and allowing for 150 % elastic deformation. OTS adheres effectively to diverse complex surfaces, with adhesive strengths of 14.55 MPa underwater and 8.83 MPa in air, demonstrating excellent versatility. The biocompatibility and degradability of OTS were confirmed by a wound healing model in SD rats, showing no nanotoxicity and effectively promoting wound healing, rapid hemostasis, and sealing. This green adhesive strategy offers a novel approach to augmenting the cohesive strength of tissue adhesives suitable for complex conditions and has potential medical applications ranging from rapid hemostasis to wound healing enhancement.

Preparation of carboxylated-silk nanofibers by the one-pot method of maleic acid hydrolysis

In this study, a maleic acid (MA) hydrolysis one-pot method is proposed to prepare carboxylated silk nanofibers (MA-SNFs). The MA concentration, hydrolysis temperature, and processing time were optimized. Combined with high-pressure homogenization, MA-SNFs with a carboxyl content of 0.617±0.019 mmol/g and length of 333±116 nm were obtained with a yield of 54.90±1.98 % at the optimal conditions: 50 wt% of MA concentration, 110 °C of hydrolysis temperature and 120 min of processing time. The morphology, chemical structure, and crystal structure of raw silk fibroin (SF), acid-hydrolyzed silk fibroin and nanofibers were studied. Furthermore, MA was reused several times with a recovery rate of >94 % and maintained almost the same treatment effect. Finally, due to the presence of carboxyl groups, MA-SNF hydrogels were successfully prepared by an acetic coagulation vapor bath which exhibited excellent self-supporting ability and mechanical properties as well as a more sensitive pH response compared with regenerated silk fibroin solution and other non-carboxylated silk nanofibers. The MA-SNF aerogels had the characteristics of light weight, high strength and porous with cross-linked nanostructures.

Ultra-permeable silk-based polymeric membranes for vacuum-driven nanofiltration

Nanofiltration (NF) membranes are commonly supplied in spiral-wound modules, resulting in numerous drawbacks for practical applications (e.g., high operating pressure/pressure drop/costs). Vacuum-driven NF could be a promising and low-cost alternative by utilizing simple components and operating under an ultra-low vacuum pressure (<1 bar). Nevertheless, existing commercial membranes are incapable of achieving practically relevant water flux in such a system. Herein, we fabricated a silk-based membrane with a crumpled and defect-free rejection layer, showing water permeance of 96.2 ± 10 L m-2 h-1 bar-1 and a Na2SO4 rejection of 96.0 ± 0.6% under cross-flow filtration mode. In a vacuum-driven system, the membrane demonstrates a water flux of 56.8 ± 7.1 L m-2 h-1 at a suction pressure of 0.9 bar and high removal rate against various contaminants. Through analysis, silk-based ultra-permeable membranes may offer close to 80% reduction in specific energy consumption and greenhouse gas emissions compared to a commercial benchmark, holding great promise for advancing a more energy-efficient and greener water treatment process and paving the avenue for practical application in real industrial settings.

Highly conductive, stretchable, and biocompatible graphene oxide biocomposite hydrogel for advanced tissue engineering

The importance of hydrogels in tissue engineering cannot be overemphasized due to their resemblance to the native extracellular matrix. However, natural hydrogels with satisfactory biocompatibility exhibit poor mechanical behavior, which hampers their application in stress-bearing soft tissue engineering. Here, we describe the fabrication of a double methacrylated gelatin bioink covalently linked to graphene oxide (GO) via a zero-length crosslinker, digitally light-processed (DLP) printable into 3D complex structures with high fidelity. The resultant natural hydrogel (GelGOMA) exhibits a conductivity of 15.0 S m-1as a result of the delocalization of theπ-orbital from the covalently linked GO. Furthermore, the hydrogel shows a compressive strength of 1.6 MPa, and a 2.0 mm thick GelGOMA can withstand a 1.0 kg ms-1momentum. The printability and mechanical strengths of GelGOMAs were demonstrated by printing a fish heart with a functional fluid pumping mechanism and tricuspid valves. Its biocompatibility, electroconductivity, and physiological relevance enhanced the proliferation and differentiation of myoblasts and neuroblasts and the contraction of human-induced pluripotent stem cell-derived cardiomyocytes. GelGOMA demonstrates the potential for the tissue engineering of functional hearts and wearable electronic devices.

Organic acid treatments on citrus insoluble dietary fibers and the corresponding effects on starch in vitro digestion

Three environmentally friendly organic acids, acetic acid, citric acid and oxalic acid, were used to treat citrus insoluble dietary fiber (CIDF) in present study, aiming to explore the changes in structural properties as well as their inhibitory effects on starch digestion. The results showed that organic acid treatment significantly reduced the particle size of all three CIDFs, with rougher and folded surfaces, improved crystallinity and thermal stability. During in vitro digestion, it was found that organic acid treatment could increase the particle size and viscosity of digestion, and also effectively enhance the inhibitory ability of α-glucosidase activity, resulting in a further blockage of starch digestion. The starch digestion in oxalic acid-treated group (with 3 wt% addition) was significantly reduced by 18.72 % compared to blank group and 9.05 % compared to untreated. These findings provide evidence of the potential of organic acid-treated insoluble dietary fiber as a functional food.

Surface-engineered natural fibers: Emerging alternative substrates for chemical sensor applications: A review

Natural fiber has become one of the most widely used alternative materials for chemical sensor fabrication due to its advantages, such as biocompatibility, flexibility, and self-microfluidic properties. Enhanced natural fiber surface has been used as a substrate in colorimetric and electrochemical sensors. This review focuses on improving the natural fiber properties for preparation as a substrate for chemical sensors. Various methods for natural fiber extraction are discussed and compared. Bleaching and decolorization is important for preparation of colorimetric sensors, while carbonization and nanoparticle doping are favorable for increasing their electrical conductivity for electrochemical sensor fabrication. Also, example fabrications and applications of natural fiber-based chemical sensors for chemical and biomarker detection are discussed. The selectivity of the sensors can be introduced and improved by surface modification of natural fiber, such as enzyme immobilization and biorecognition element functionalization, illustrating the adaptability of natural fiber as a smart sensing device, e.g., wearable and portable sensors. Ultimately, the high performances of natural fiber-based chemical sensors indicate the potential uses of natural fiber as a renewable and eco-friendly substrate material in the field of chemical sensors and biosensors for clinical diagnosis and environmental monitoring.

Self-Sanitization in a Silk Nanofibrous Network for Biodegradable PM0.3 Filters with In Situ Joule Heating

In the contemporary way of life, face masks are crucial in managing disease transmission and battling air pollution. However, two key challenges, self-sanitization and biodegradation of face masks, need immediate attention, prompting the development of innovative solutions for the future. In this study, we present a novel approach that combines controlled acid hydrolysis and mechanical chopping to synthesize a silk nanofibrous network (SNN) seamlessly integrated with a wearable stainless steel mesh, resulting in the fabrication of self-sanitizable face masks. The distinct architecture of face masks showcases remarkable filtration efficiencies of 91.4, 95.4, and 98.3% for PM0.3, PM0.5, and PM1.0, respectively, while maintaining a comfortable level of breathability (ΔP = 92 Pa). Additionally, the face mask shows that a remarkable thermal resistance of 472 °C cm2 W-1 generates heat spontaneously at low voltage, deactivating Escherichia coli bacteria on the SNN, enabling self-sanitization. The SNN exhibited complete disintegration within the environment in just 10 days, highlighting the remarkable biodegradability of the face mask. The unique advantage of self-sanitization and biodegradation in a face mask filter is simultaneously achieved for the first time, which will open avenues to accomplish environmentally benign next-generation face masks.

In vitro chemical treatment of silk increases the expression of pro-inflammatory factors and facilitates degradation in rats

OBJECTIVES

Silk fiber is difficult to degrade in vivo, which limits its application in tissue engineering materials such as artificial nerves. Therefore, in this study aim to promote its degradation in vivo by chemical treating silk fibers in vitro.

MATERIALS AND METHODS

Sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), scanning electron microscopy (SEM) observations, mechanical test, Fourier transform infrared spectroscopy (FT-IR) measurements were used to investigate the degradation effect of chemicals (hydrochloric acid, phosphoric acid, acetic acid, sodium hydroxide, calcium hydroxide, sodium bicarbonate, and calcium chloride) on silk fiber in vitro. Immunofluorescence staining and transcriptome analysis were used to investigate the effect of inflammatory factors on the degradation of chemically treated silk fiber in rats.

RESULTS

(1) Silks were separated into finer fibers in each group. (2) FT-IR absorption peaks of amides I, II, and III overlap in each group. (3) Silk degradation degree in each group was higher than that in an untreated group. The calcium chloride-treated group was completely degraded. (4) Fibronectin, collagen I, collagen III, integrin α and CD68 were immunofluorescence positive in all vegetation section. (5) There were no significant differences in the expressions of collagen I, collagen III, and fibronectin in the vegetations formed on the 14th day of subcutaneous implantation, while integrin α, CD68, TNF-α, IL-1b, and IL-23 express at higher levels with IL-10 at lower levels.

CONCLUSIONS

All chemicals could completely degrade silk; however, their degradation products were not the same. The chemicals change the mechanical properties of silk by separating it into finer fibers, which increase the contact surface area between the silk and tissue fluid, accelerating the degradation of monofilaments in vivo by promoting inflammation and macrophage activity through the increased and decreased expressions of pro- and anti-inflammatory factors, respectively.

Natural spider silk nanofibrils produced by assembling molecules or disassembling fibers

Spider silk is biocompatible, biodegradable, and rivals some of the best synthetic materials in terms of strength and toughness. Despite extensive research, comprehensive experimental evidence of the formation and morphology of its internal structure is still limited and controversially discussed. Here, we report the complete mechanical decomposition of natural silk fibers from the golden silk orb-weaver Trichonephila clavipes into ≈10 nm-diameter nanofibrils, the material's apparent fundamental building blocks. Furthermore, we produced nanofibrils of virtually identical morphology by triggering an intrinsic self-assembly mechanism of the silk proteins. Independent physico-chemical fibrillation triggers were revealed, enabling fiber assembly from stored precursors "at-will". This knowledge furthers the understanding of this exceptional material's fundamentals, and ultimately, leads toward the realization of silk-based high-performance materials. STATEMENT OF SIGNIFICANCE: Spider silk is one of the strongest and toughest biomaterials, rivaling the best man-made materials. The origins of these traits are still under debate but are mostly attributed to the material's intriguing hierarchical structure. Here we fully disassembled spider silk into 10 nm-diameter nanofibrils for the first time and showed that nanofibrils of the same appearance can be produced via molecular self-assembly of spider silk proteins under certain conditions. This shows that nanofibrils are the key structural elements in silk and leads toward the production of high-performance future materials inspired by spider silk.

Advances in Preparation and Properties of Regenerated Silk Fibroin

Over the years, silk fibroin (SF) has gained significant attention in various fields, such as biomedicine, tissue engineering, food processing, photochemistry, and biosensing, owing to its remarkable biocompatibility, machinability, and chemical modifiability. The process of obtaining regenerated silk fibroin (RSF) involves degumming, dissolving, dialysis, and centrifugation. RSF can be further fabricated into films, sponges, microspheres, gels, nanofibers, and other forms. It is now understood that the dissolution method selected greatly impacts the molecular weight distribution and structure of RSF, consequently influencing its subsequent processing and application. This study comprehensively explores and summarizes different dissolution methods of SF while examining their effects on the structure and performance of RSF. The findings presented herein aim to provide valuable insights and references for researchers and practitioners interested in utilizing RSF in diverse fields.

Nanosilk Template-Guided/Induced Construction of Brush-/Flower-like 3D Nanostructures

Biomaterials with natural hierarchical structures typically exhibit extraordinary properties because of their multilevel structural designs. They offer many templates and models as well as inspiration for material design, particularly for fabricating structure-regulated, performance-enhanced, and function-enriched materials. Biopolymer-based nanocomposites with ingenious nanostructures constructed through ecofriendly and sustainable approaches are highly desirable to meet the multifunctional requirements of developing bioinspired materials. Herein, an all-silk fibroin-based nanocomposite with a brush-like nanostructure was constructed for the first time using a nanotemplate-guided assembly approach in which dissolved silk assembled directly on a silk nanowhisker (SNW) backbone to form peculiar nanobrushes based on the classical micelle model. Three-dimensional spider-like or centipede-like silk nanobrushes (SNBs) were fabricated by varying the SNW backbone length from 0.16 to 6 μm. The branches with average lengths of 32-290 nm were also adjustable. SNBs were further designed to regulate and induce biomineralization of hydroxyapatite (HAP) to form interesting flower-like nanostructures, in which the HAP nanosphere (diameters ∼16 nm) "core" was covered by SNBs with branches extending to form a "shell" (∼101 nm in length). Based on such protein nanotemplate-guided formation of nanoscale structures, practical hollow conduits with remarkable mechanical properties, biocompatibility, shape memory behavior, and bone engineering potential were fabricated. This study inspires the design of polymorphous biopolymer-based nanostructures with enhanced performance at multiple length scales where the weaknesses of individual building blocks are offset.

Formulation of Silk Fibroin Nanobrush-Stabilized Biocompatible Pickering Emulsions

Silk fibroin is widely believed to be sustainable, biocompatible, and biodegradable, providing promising features such as carriers to deliver drugs and functional ingredients in food, personal care, and biomedical areas, which are consistent with emulsion characteristics; especially, green, all-natural biopolymer-based stabilizers are in great demand to stabilize Pickering emulsions and match the multifunctional needs for developing ideal materials. Herein, an unprecedented three-dimensional (3D) nanostructure, namely a brush-like silk nanobrush (SNB), is applied as the stabilizer to formulate and stabilize Pickering emulsions. The size and interfacial tension are compared among the SNB, a regenerated silk nanofiber, and a nanowhisker. Additionally, optimization processes are conducted to determine the ideal ultrasonication intensity and SNB concentration required to prepare Pickering emulsions by analyzing the morphology, creaming index, mean oil droplet size, and rheological behavior. The results indicate that an SNB with the characteristic structure and suitable size shows superior potential to form sophisticated and interconnected networks in oil-water interfaces, and is proved to be able to resist creaming at a wide range of concentrations and subsequently stabilize Pickering emulsions from liquid-like emulsions to gel-like emulsions. Additionally, SNB is proved to be biocompatible according to cell experiments, providing a promising alternative in designing all-natural, green, and biocompatible emulsions with the aim of efficiently delivering nutrients or drugs associated with health benefits.

Insignificant Difference in Biocompatibility of Regenerated Silk Fibroin Prepared with Ternary Reagent Compared with Regenerated Silk Fibroin Prepared with Lithium Bromide

Bombyx mori silk fibroin (SF) is widely used in the field of biomaterials due to its excellent biocompatibility and mechanical properties. However, SF cannot be used directly in many applications and needs to be dissolved first. Lithium bromide (LiBr) is a traditional solvent which is usually used to dissolve SF. However, LiBr has several limitations, e.g., it is expensive, it is toxic to organisms, and it is environmentally unfriendly. Herein, we investigate the possibility of developing a ternary reagent system that is inexpensive, non-toxic to organisms, and environmentally friendly as an alternative for silk fibroin solubilization. The results confirm that regenerated silk fibroin (RSF) prepared using a ternary reagent has the same morphology and amino acid composition as that prepared using LiBr, but the RSF prepared using a ternary reagent still had a small amount of calcium residue even after long-term dialysis. Further research found that the residual calcium does not cause significant differences in the structure and biological performance of the RSF, such as its cytotoxicity, blood compatibility, and antibacterial properties. Therefore, we believe that ternary reagents are an ideal alternative solvent for dissolving SF.

Tiny NaOH Assisted Facile Preparation of Silk Nanofibers and Their Nanotube-Compositing Strong, Flexible, and Conductive Films

Natural silk nanofibers (SNFs) can not only be used as good building blocks for two- or three-dimensional biomaterials but also provide a clue for understanding the theory of structure-function relationships. Nevertheless, it is still difficult to directly extract SNFs from natural silk fibers due to their high crystallinity and recalcitrant complex structures. In the present study, a dilute alkali-assisted separation of high-yield SNFs is proposed. The degummed silk was first treated with a tiny amount of alkali at a mild temperature, followed by high-pressure homogenization. Under the optimized conditions (2% sodium hydroxide, 0 °C, 48 h), SNFs with diameters of 8-42 nm and lengths of 0.9 ± 0.3 μm were prepared with yields higher than 75%, which retained the natural structures at the nanoscale and some inherent properties of silk fibers. Interestingly, SNFs can be used as a stabilizing matrix to assist carbon nanotubes (CNTs) to disperse, aiming to form a uniform and stable CNT/SNF dispersion. Thereafter, a strong and flexible conductive composite film was fabricated with good mechanical properties. The composite film showed good piezoelectric properties and electric thermal response, which has promising application prospects for SNFs, such as in optical devices, nanoelectronics, and biosensors.

Fiber-Based Biopolymer Processing as a Route toward Sustainability

Some of the most abundant biomass on earth is sequestered in fibrous biopolymers like cellulose, chitin, and silk. These types of natural materials offer unique and striking mechanical and functional features that have driven strong interest in their utility for a range of applications, while also matching environmental sustainability needs. However, these material systems are challenging to process in cost-competitive ways to compete with synthetic plastics due to the limited options for thermal processing. This results in the dominance of solution-based processing for fibrous biopolymers, which presents challenges for scaling, cost, and consistency in outcomes. However, new opportunities to utilize thermal processing with these types of biopolymers, as well as fibrillation approaches, can drive renewed opportunities to bridge this gap between synthetic plastic processing and fibrous biopolymers, while also holding sustainability goals as critical to long-term successful outcomes.

Protein nanofibrils for next generation sustainable water purification

Water scarcity is rapidly spreading across the planet, threatening the population across the five continents and calling for global sustainable solutions. Water reclamation is the most ecological approach for supplying clean drinking water. However, current water purification technologies are seldom sustainable, due to high-energy consumption and negative environmental footprint. Here, we review the cutting-edge technologies based on protein nanofibrils as water purification agents and we highlight the benefits of this green, efficient and affordable solution to alleviate the global water crisis. We discuss the different protein nanofibrils agents available and analyze them in terms of performance, range of applicability and sustainability. We underline the unique opportunity of designing protein nanofibrils for efficient water purification starting from food waste, as well as cattle, agricultural or dairy industry byproducts, allowing simultaneous environmental, economic and social benefits and we present a case analysis, including a detailed life cycle assessment, to establish their sustainable footprint against other common natural-based adsorbents, anticipating a bright future for this water purification approach.

Silk nanodisc based edible chitosan nanocomposite coating for fresh produces: A candidate with superior thermal, hydrophobic, optical, mechanical and food properties

This paper demonstrates the fabrication of silk nanodisc (SND) dispersed chitosan (CS) based new edible coating as a candidate for superior thermal, hydrophobic, optical, mechanical, and physicochemical properties, which further provide remarkable storage quality for banana fruits. Fabrication of SND is attained following acid hydrolysis of silk fibroin (SF), where the successful nanostructures formulations are analyzed by FESEM, FETEM and XRD analysis delivering disc shaped morphology with amplified crystallinity (~95.0%). The SF has been fabricated from waste muga cocoons using the degumming process. The superior thermal stability of SND compared to SF portray a new era in required heat resistant packaging. The effectiveness of SND is investigated on packaging properties of CS biocomposites including thermal, wettability, mechanical, color, surface morphology, and others. Wettability of SND incorporated CS biocomposite enhanced by ~ 10° suggesting improved hydrophobicity. The edible coatings are a new candidate to improve the shelf life of bananas over 7 days at 25 °C for prevailing original weight, optical property, firmness, and others.

Top-down extraction of surface carboxylated-silk nanocrystals and application in hydrogel preparation

Bionanomaterial based hydrogels originated from natural biopolymer have drawn much attention for advanced applications. However, nanosilk-based hydrogels derived from top-down approaches remain in their infancy. First, nanosilks based on existing methods fail to prepare hydrogels; second, both nanosilk extraction and surface modification remain a challenge due to high crystallinity and sophisticated hierarchical structures. To produce nanosilk-based hydrogels, pretreatment and oxidation are necessary. In this work, pretreatments were conducted first to loosen the sophisticated structures of natural silk fibers, NaClO oxidation was utilized in succession to introduce carboxyl groups onto silk fibroin. Combined with moderate mechanical disintegration, silk nanocrystals with additional carboxyl groups were prepared facilely. Finally, silk nanocrystal-based hydrogels were prepared successfully through gas phase coagulation. An optimization of pretreatment approaches and oxidation conditions was carried out. The morphologies, chemical and crystalline structures of original, pretreated and oxidized silk fibroin as well as nanofibrillated silk were investigated. In addition, the silk nanocrystal-based hydrogel exhibited outstanding mechanical properties compared to those of dissolved and regenerated silk fibroin-based hydrogels. Moreover, silk nanocrystal-based aerogels present highly porous, interconnected, and crisscrossed network nanostructures, which are ideal candidates for tissue regeneration and provide new prospects as porous scaffolds for bioengineering applications.

Natural silk nanofibrils as reinforcements for the preparation of chitosan-based bionanocomposites

Nanofibrils derived from natural biopolymers have received extensive interest due to their exceptional mechanical properties and excellent biocompatibility. To fabricate biocompatible chitosan nanocomposites with high mechanical performance, silkworm silks were deconstructed into nanofibrils as structural and mechanical reinforcement of chitosan. After dispersing silk nanofibrils in chitosan solution, a set of nanocomposites, including film, porous scaffold, filament, and nanofibrous sponge, could be fabricated from the blended solutions. Silk nanofibrils could be uniformly dispersed in chitosan solution, and formed multi-dimensional nanocomposites. The nanocomposites exhibited enhanced mechanical strength and thermal stability, and provided a biomimetic nanofibrous structure for biomaterial applications. The enhancement in mechanical properties can be attributed to the interaction between the nanofibril phase and the chitosan matrix. As the polysaccharide/protein bionanocomposites derived from natural biopolymers, these materials offer new opportunities for biomaterial application by virtue of their biocompatibility and biodegradability, as well as enhanced mechanical properties and controllable mesoscopic structure.

Quaternized Silk Nanofibrils for Electricity Generation from Moisture and Ion Rectification

Protein nanostructures in living organisms have attracted intense interests in biology and material science owing to their intriguing abilities to harness ion transportation for matter/signal transduction and bioelectricity generation. Silk nanofibrils, serving as the fundamental building blocks for silk, not only have the advantages of natural abundance, low cost, biocompatibility, sustainability, and degradability but also play a key role in mechanical toughness and biological functions of silk fibers. Herein, cationic silk nanofibrils (SilkNFs), with an ultrathin thickness of ∼4 nm and a high aspect ratio up to 500, were successfully exfoliated from natural cocoon fibers via quaternization followed by mechanical homogenization. Being positively charged in a wide pH range of 2-12, these cationic SilkNFs could combine with different types of negatively charged biological nanofibrils to produce asymmetric ionic membranes and aerogels that have the ability to tune ion translocation. The asymmetric ionic aerogels could create an electric potential as high as 120 mV in humid ambient air, whereas asymmetric ionic membranes could be used in ionic rectification with a rectification ratio of 5.2. Therefore, this green exfoliation of cationic SilkNFs may provide a biological platform of nanomaterials for applications as diverse as ion electronics, renewable energy, and sustainable nanotechnology.