In situ digestion-assisted multi-template imprinted nanoparticles for efficient analysis of protein phosphorylation

A new general approach called in situ digestion-assisted multi-template imprinting is proposed for preparation of phospho-specific molecularly imprinted nanoparticles. Through the novel templating strategy and controllable imprinting process, imprinted nanoparticles specific to the intact phosphoprotein and its phosphopeptides were synthesized. The prepared imprinted nanoparticles exhibited excellent specificity (cross reactivity < 10%), high affinity (10-6 M), high efficiency (47.5%), and good generality (both intact phosphoprotein and phosphopeptides). We also realized the fine tuning of the recognition at peptide level of the imprinted nanoparticles by adjusting the imprinting time. Based on the selective enrichment of the imprinted nanoparticles, the MS identification of both the intact phosphoprotein (Tau) and phosphopeptides (angiotensin II and peptides of Tau) in real complex samples could be achieved. Therefore, we believe that the in situ digestion-assisted multi-template imprinting strategy holds promising future in both phosphorylation analysis and proteomics applications.

Molecularly Imprinted Silica-Coated CdTe Quantum Dots for Fluorometric Determination of Trace Chloramphenicol

A dual recognition system with a fluorescence quenching of quantum dots (QDs) and specific recognition of molecularly imprinted polymer (MIP) for the detection of chloramphenicol (CAP) was constructed. MIP@SiO₂@QDs was prepared by reverse microemulsion method with 3-aminopropyltriethoxysilane (APTS), tetraethyl orthosilicate (TEOS) and QDs being used as the functional monomer, cross-linker and signal sources, respectively. MIP can specifically recognize CAP, and the fluorescence of QDs can be quenched by CAP due to the photo-induced electron transfer reaction between CAP and QDs. Thus, a method for the trace detection of CAP based on MIP@SiO₂@QDs fluorescence quenching was established. The fluorescence quenching efficiency of MIP@SiO₂@QDs displayed a desirable linear response to the concentration of CAP in the range of 1.00~4.00 × 10² μmol × L⁻¹, and the limit of detection was 0.35 μmol × L⁻¹ (3σ, n = 9). Importantly, MIP@SiO₂@QDs presented good detection selectivity owing to specific recognition for CAP, and was successfully applied to quantify CAP in lake water with the recovery ranging 102.0~104.0%, suggesting this method has the promising potential for the on-site detection of CAP in environmental waters.

Fe3O4@PANI: a magnetic polyaniline nanomaterial for highly efficient and handy enrichment of intact N-glycopeptides

Glycosylation of proteins plays important roles in the occurrence and development of chronic diseases. In this study, we report an enrichment method of intact N-glycopeptides using a magnetic polyaniline nanomaterial (Fe₃O₄@PANI). Under the synergistic effect of hydrogen bonding and electrostatic adsorption, Fe₃O₄@PANI can rapidly and easily enrich N-glycopeptides derived from standard protein (bovine fetuin and transferrin) tryptic digests and serum haptoglobin tryptic digests. Finally we have detected 63 glycopeptides in the glycosylation sites of both N204 and N211 from the serum haptoglobin beta chain using MALDI FTICR MS. Compared with non-magnetic materials, Fe₃O₄@PANI can achieve complete separation from complex biological samples, meeting the requirement of the high purity of samples for mass spectrometric detection. Overall, Fe₃O₄@PANI exhibits great application potential in the highly efficient enrichment of intact N-glycopeptides due to its stability and convenient preparation.

6-Aminopyridine-3-boronic acid functionalized magnetic nanoparticles for highly efficient enrichment of cis-diol-containing biomolecules

Boronate affinity materials, as efficient sorbents for extraction, separation and enrichment of cis-diol-containing biomolecules, have attracted more and more attention in recent years. However, conventional boronate affinity materials require a basic binding pH (usually 8.5), which gives rise to not only inconvenience in operation but also the risk of degradation of labile compounds, and suffer from low binding affinity, which make the extraction of cis-diol-containing compounds of low concentration difficult or impossible. In order to reduce the binding pH to neutral or acidic conditions and improve binding affinity, we present a type of material, 6-aminopyridine-3-boronic acid functionalized magnetic nanoparticles, with affinity towards cis-diol-containing biomolecules. 6-Aminopyridine-3-boronic acid, exhibiting low binding pH, high affinity and excellent water solubility toward cis-diol-containing compounds, was first employed as an affinity ligand. The result indicated that the boronate affinity MNPs exhibited low binding pH (5.0) and high binding affinity toward cis-diol-containing biomolecules. Such a property enabled the selective extraction of cis-diol-containing biomolecules with low concentration under neutral or acidic conditions. This feature greatly favored the selective enrichment of cis-diol-containing biomolecules with low concentration from real samples. The feasibility for practical applications was demonstrated with the selective enrichment of cis-diol-containing biomolecules with low concentration in a human urine sample.

A cellulose-based temperature sensitivity molecular imprinted hydrogel for specific recognition and enrichment of paclitaxel

A microcrystalline cellulose-based temperature sensitivity paclitaxel molecular imprinted hydrogel (MCC-TSMIHs-PTX) was successfully prepared by temperature-sensitive monomer N-isopropylacrylamide, functional monomer 4-vinylpyridine, cross-linking agent N, N'-methylenebisacrylamide and microcrystalline cellulose. They showed imprinting effective responses to the temperature changes. The results of adsorption kinetics, adsorption equilibrium, thermodynamics, selectivity and reusability showed the successful formation of a grafting thermosensitivity hydrogel with higher adsorption capacity and specific recognition. When the temperature reached 308 K, imprinting effect of hydrogel cavities would be most effective and conducive to capture template molecules. When the temperature reached 288 K, the lowest imprinting effect would facilitate the desorption of PTX. Finally, the MCC-TSMIHs-PTX was applied to enrich the paclitaxel in Taxus × media extracts samples, the relative contents of PTX in the samples were increased greatly from 7.23% to 78.32%, indicating the MCC-TSMIHs-PTX was a stable adsorption capacity for efficient separation and enrichment of PTX in Taxus × media extracts.

Boronate Affinity-Based Oriented and Double-Shelled Surface Molecularly Imprinted Polymers on 96-Well Microplates for a High-Throughput Pharmacokinetic Study of Rutin and Its Metabolites

The boronate affinity-based oriented and double-shelled surface molecularly imprinted polymers on 96-well microplates (BDMIPs) were designed and applied to high-specific and high-throughput pharmacokinetic (PK) study of rutin and its metabolites from rat plasma without concentration and redissolution. It integrated the advantages of covalent effects-based boronate affinity, noncovalent effects of ethylene imine polymer (PEI) dendrimer, multiple cavities-based double-shelled layers, and multiparallel wells-based 96-well microplates. Furthermore, ultrahigh-performance liquid chromatography triple quadrupole tandem mass spectrometry (UHPLC-MS/MS) was used to accurately quantify targets. It showed lower limits of detection (LODs) up to 100-fold than the conventional method. And PKs of rutin and trace isoquercetin (IQC) were first reported at the same time. The platform can provide a fast, simple, low-cost, high-selective, high-effective, and high-throughput methodological reference for analysis of large-scale samples in the fields of agriculture and food.

Selective analysis of interferon-alpha in human serum with boronate affinity oriented imprinting based plastic antibody

Interferons are important biomolecules in human immune system. Cytokine interferon alpha (IFN-α), a type I interferon, is one of the major components of the innate immune response involved in autoimmune diseases. Thus, the analysis of interferons is of great importance for both biological and pharmaceutical purposes. In this work, an IFN-α specific plastic antibody is prepared via boronate affinity oriented surface imprinting. By combing with the magnetic nanoparticles, the imprinted material exhibits several advantages, including strong affinity (K_d: 75.2 nM), high specificity (cross reactivity<25%), excellent efficiency (imprinting efficiency: 44.1%), tolerance to interferences, and easy manipulation. By employing the prepared imprinted material as sorbent for selective enrichment of IFN-α, a good linearity is achieved in the range of 50 ng/mL-10 μg/mL, and the detection and quantifcation limits are 10 ng/mL and 50 ng/mL respectively. The recoveries of this approach are found within 75.8%-82.2% with relative standard deviations of 6.4-9.7%. Furthermore, the IFN-α in spiked human serum is analyzed with acceptable reliability (recovery: 77.3%, RSD: 7.9%). Because of these highly desirable properties, the IFN-α specific plastic antibody can find more applications in medical and pharmaceutical industry.

Metal-Organic Gel-Modulated Synthesis of Hierarchically Porous Molecularly Imprinted Polymers for Efficient Removal of Sildenafil from Water

Molecularly imprinted polymers (MIPs) with high specific recognition capability are promising in environmental remediation. However, traditional MIPs usually show poor specific binding affinity toward templates in pure aqueous medium, thus greatly limiting their practical applications in wastewater treatment. Herein, we proposed a facile and versatile method to synthesize a water-compatible hierarchically porous MIP (HP-MIP), in which a metal-organic gel (MOG) was formed by in situ assembly and acted as a removable structural modulator. Remarkably, the integration of the MOG modulator and template imprinting defects significantly improved the specific template binding affinity of HP-MIP in water. The adsorption behavior of HP-MIP fitted well with the heterogeneous Freundlich isotherm, suggesting that HP-MIP possessed greater site heterogeneity to sildenafil than HP-NIP, which confirmed the efficiency of HP-MIP for the removal of sildenafil from water. This approach provides an important pathway to prepare water-compatible porous MIP for efficient removal of highly toxic organic pollutants from wastewater.

Synthesis of gold nanoparticles/polyaniline boronic acid/sodium alginate aqueous nanocomposite based on chemical oxidative polymerization for biological applications

Gold nanoparticles/polyaniline boronic acid/sodium alginate aqueous nanocomposite ((PABA-SAL)@AuNPs) was fabricated. Aniline boronic acid (ABA) served as reductant of gold salt, all within the SAL solution. While ABA reduced gold salt to its nanoparticles, the ABA monomer was also oxidized to its conducting polymeric form (PABA). The presence of PABA in the reaction mixture exerted solubility and stability challenge, thus SAL was used as stabilizer and solubilizer for PABA. The numerous cis-diol groups of SAL could bind to boronic acid groups of PABA to furnish PABA-SAL repeating polymer structure for AuNPs anchoring. Sparkling ruby red (PABA-SAL)@AuNPs have absorption peaks at 529 and 718 nm. Average particle sizes of nanocomposite were within 15-20 nm, with hydrodynamic diameter of 48.6 ± 0.9 nm, zeta potential of -32.5 ± 1.6 mV and conductivity value of 2015.3 ± 3.2 μS/cm. (PABA-SAL)@AuNPs possessed antibacterial activities against seafood associated bacterial isolates, with MIC and MBC ranging from 4 to 8 μg/mL. The moderate antioxidant capacity of (PABA-SAL)@AuNPs was observed, without any deleterious damages on human red blood cells. It also has good biocompatibility on Caco-2 and RAW 264.7, with cell viability not less than 70%. These results confirm the high prospect of (PABA-SAL)@AuNPs for possible biomedical applications.

Preparation of Boronic Acid-Functionalized Cryogels Using Modular and Clickable Building Blocks for Bacterial Separation

Composite cryogels containing boronic acid ligands are synthesized for effective separation and isolation of bacteria. The large and interconnected pores in cryogels enable fast binding and release of microbial cells. To control bacterial binding, an alkyne-tagged boronic acid ligand is conjugated to azide-functionalized cryogel via the Cu(I)-catalyzed azide-alkyne cycloaddition reaction. The boronic acid-functionalized cryogel binds Gram-positive and Gram-negative bacteria through reversible boronate ester bonds, which can be controlled by pH and simple monosaccharides. To increase the capacity of affinity separation, a new approach is used to couple the alkyne-tagged phenylboronic acid to cryogel via an intermediate polymer layer that provides multiple immobilization sites. The morphology and chemical composition of the composite cryogel are characterized systematically. The capability of the composite cryogel for the separation of Gram-positive and Gram-negative bacteria is investigated. The binding capacities of the composite cryogel for Escherichia coli and Staphylococcus epidermidis are 2.15 × 10⁹ and 3.36 × 10⁹ cfu/g, respectively. The bacterial binding of the composite cryogel can be controlled by adjusting pH. The results suggest that the composite cryogel may be used as affinity medium for rapid separation and isolation of bacteria from complex samples.

Fabrication of an electrochemical biodevice for ractopamine detection under a strategy of a double recognition of the aptamer/molecular imprinting polymer

The importance of RAC tracking in human biofluids has boosted many demands for designing an ultrasensitive tool to determine the trace value of the RAC from clinical, judicial, and forensic centers. In this study, an electrochemical biodevice has developed for the highly selective detection of this illegal feed additive under a double recognition strategy of the aptamer (Apt) and molecular imprinting polymer (MIP) on a glassy carbon electrode (GCE). The sensing relies on this fact that both the MIP and Apt act synergistically to trap the RAC molecules. The sensing surface fabrication steps have been monitored by some electrochemical techniques such as electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV(. The charge transfer resistance (R_ct) value of the redox probe as a representative of the biodevice response has increased linearly with the RAC concentration increasing in a dynamic range of 1 fM to 1.90 µM. The detection limit (LOD) value has been estimated to be 330 aM, lower than all of the reported methods in the RAC sensing. Furthermore, the practical feasibility of biodevice has been evaluated in some human blood serum and urine samples. This strategy offers some useful advantages in reliable detection of the RAC, which may help in the routine analysis, as mandated by regulatory agencies.

Dual boronate affinity nanoparticles-based plasmonic immunosandwich assay for specific and sensitive detection of ginsenosides

Ginsenoside is a large family of triterpenoid saponins from Panax ginseng with various important biological functions. It is crucial to develop effective analytical approach for qualitative and quantitative analysis of ginsenosides. Herein, a dual boronate affinity nanoparticles-based plasmonic immunosandwich assay has been developed for analysis of ginsenosides. An imprinted Au NPs-coated glass slide was prepared via controllable oriented surface imprinting and used as specific extraction substrate for target molecules. In the meantime, Ag-cored Raman nanotags were used for specific labeling of target molecules. The MIP-based recognitions ensured the specificity of the assay, while enhanced Raman signal derived from the imprinted substrate-target-nanotags sandwich-like complexes provided high sensitivity. The proposed immunosandwich assay exhibited wide linear range (10 ng/mL to 10 μg/mL), high sensitive (LOD: 1.7 ng/mL, LOQ: 5 ng/mL) and good reproducibility (RSD: 8.6%). For real-world applications, successful quantitative analysis of ginsenoside Re in ginseng was performed. Therefore, this dual boronate affinity nanoparticles-based plasmonic immunosandwich assay holds great promise in many important applications such as pharmaceutical analysis.

Molecularly imprinted cryogel cartridges for the selective recognition of tyrosine

Molecularly imprinted polymers are used for creating a specific cavity and selective recognition sites for the structure of a target molecule in a polymeric structure. In this study, specific molecularly imprinted cryogel cartridges were synthesized using two distinct functional monomers to compare imprinting efficiency for the selective recognition of Tyrosine (Tyr). Tyr-imprinted cryogel cartridge (MIP1) was prepared using metal-chelate coordination for the imprinting process by free-radical bulk polymerization under frozen conditions, and Tyr-imprinted cryogel cartridge (MIP2) was prepared in the same way using hydrophobic effects for imprinting. After the characterization of the cryogel cartridges was carried out, the optimum adsorption conditions of both were determined according to the different parameters such as flow rate (0.5-2.5 ml/min), pH of the medium (4.0-8.0), initial Tyr concentration (0.1-3.0 mg/ml), and temperature (4-45°C). Selectivity experiments of Tyr-imprinted and non-imprinted cryogel cartridges were carried out by using phenylalanine, tryptophan, and cysteine. Besides, the eluted Tyr from MIP1 and MIP2 cryogel cartridge were applied to FPLC system. Also, the reusability experiments of Tyr-imprinted cryogel cartridges was observed no significant decrease in the adsorption capacity.

Label-free detection of biomarker alpha fetoprotein in serum by ssDNA aptamer functionalized magnetic nanoparticles

Hepatocellular carcinoma (HCC) is one of the most common malignant tumors in the clinic, with the characteristics of occult onset, rapid progression, and high degree of malignancy. Alpha fetoprotein (AFP) is the most important biomarker of HCC, which is widely used in early screening, diagnosis, and prognosis observation. A series of immunoassays have been developed and frequently used in the detection of AFP based on antibodies. Unfortunately, the shortcomings of antibodies, such as thermal unstable and fluctuant activity by batches, lead to the inaccuracy in the detection of AFP. In this study, aptamers instead of antibodies were adopted as the specific recognition element for AFP, aiming to seek an alternative strategy to immunoassays. An AFP-specific ssDNA aptamer was grafted to magnetic nanoparticles (Fe₃O₄@SiO₂) via avidin-biotin interaction, and the resultant aptamer functionalized magnetic nanoparticles (Ap-MNPs) were adequately characterized and tested. The Ap-MNPs in solution exhibited a fast response to the outer magnetic field, and can be completely separated in several minutes. It was found that Ap-MNPs have good specificity to the target AFP, as the recovery of AFP (87.0%) was much higher than the competitive proteins IgG (38.9%), HSA (18.5%), and FIB (11.4%). A convenient and efficient label-free detection method of AFP in serum was developed based on Ap-MNPs in combination with high-performance liquid chromatography. The linearity of this method was over a range of 1-50 μg ml^-1 with a correlation coefficient of 0.9999, and the limit of detection was 0.27 μg ml^-1. This study indicated that aptamers are an ideal tool for the recognition and detection of biomarkers, and thus will find wide applications in clinical practice.