Synthesis of green nanosorbent from bovine serum albumin and curcumin for magnetic solid phase extraction of pesticides from food samples

For the first time, a magnetic carbon nanocomposite was synthesized using one-step hydrothermal procedure, employing bovine serum albumin, curcumin, and ferric ammonium citrate. Additionally, the application of this novel composite as an adsorbent for magnetic dispersive solid phase extraction of fungicides and pesticides from water and food samples is a unique aspect of this study. Under optimum conditions (salt concentration: 5.0% w/v, pH: 7.0, desorption solvent: ethanol, sorbent amount: 20 mg, extraction time: 20 min, desorption time: 3 min, stirring rate: 500 rpm, sample volume: 30 mL, extraction temperature: room temperature, and desorption solvent volume: 150 μL) linearity (2.5 to 1400 ng mL-1), coefficients of determination (R2 ≥ 0.997), limits of detection (0.75 to 1.5 ng mL-1), and limits of quantification (2.5 to 5.0 ng mL-1) were achieved. The method validation results showed extraction recovery ranging from 71.2% to 93.4%, and preconcentration factors ranging from 142.5 to 186.1.

Layer-by-layer fabrication of covalent organic frameworks on stainless steel needles as solid-phase microextraction probe coupled with electrospray ionization mass spectrometry for enrichment and determination of tyrosine kinase inhibitors in biosamples

Sunitinib, N-desmethyl imatinib, dasatinib, imatinib, and bosutinib are tyrosine kinase inhibitors (TKIs) that are commonly employed in the treatment of a multitude of cancers. However, the inappropriate concentrations of TKIs can result in ineffective treatment or the emergence of multiple adverse effects. Consequently, the development of a rapid and sensitive analytical method for TKIs is of paramount importance for the safe administration of drugs. In this work, solid-phase microextraction (SPME) probe combined with an electrospray ionization mass spectrometry (ESI-MS) coupling platform was constructed for rapid and sensitive determination of TKIs. The covalent organic frameworks (COFs) coated SPME probe was made of 2,4,6-tris(4-aminophenyl)-1,3,5-triazine (TAPT) and 2,5-dibutoxyterephthalaldehyde (DBTA) by in-situ layer-by-layer chemical bonding synthesis strategy. The TAPT-DBTA-SPME probe exhibited several advantageous properties which rendered it suitable for the enrichment of TKIs. Under the optimal conditions, the developed analytical method demonstrated a broad linear range (0.05-500.00 µg/L), a low limit of detection (0.02 µg/L) and a high enrichment factor (51-203) for TKIs. The developed analytical method was successfully applied to a pharmacokinetic study of TKIs in mouse plasma and tissue matrix, demonstrating that the proposed analytical method has promise for clinical applications and metabolic monitoring.

Innovative Solid-Phase Extraction Strategies for Improving the Advanced Chromatographic Determination of Drugs in Challenging Biological Samples

In the past few decades, considerable scientific strides have been made in the subject of drug analysis in human biological samples. However, the risk caused by incorrect drug plasma levels in patients still remains an important concern. This review paper attempts to investigate the advances made over the last ten years in common sample preparation techniques (SPT) for biological samples based on solid sorbents, including solid-phase extraction (SPE) and solid-phase micro-extraction (SPME), and in particular in the field of molecularly imprinted polymers (MIPs), including non-stimuli-responsive and stimuli-responsive adsorbents. This class of materials is known as 'smart adsorbents', exhibiting tailored responses to various stimuli such as magnetic fields, pH, temperature, and light. Details are provided on how these advanced SPT are changing the landscape of modern drug analysis in their coupling with liquid chromatography-mass spectrometry (LC-MS) analytical techniques, a general term that includes high-performance liquid chromatography (HPLC) and ultra-high performance liquid chromatography (UHPLC), as well as any variation of MS, such as tandem (MS/MS), multiple-stage (MSn), and high-resolution (HRMS) mass spectrometry. Some notes are also provided on coupling with less-performing techniques, such as high-performance liquid chromatography with ultraviolet (HPLC-UV) and diode array detection (HPLC-DAD) detection. Finally, we provide a general review of the difficulties and benefits of the proposed approaches and the future prospects of this research area.

Pretreatment and analysis techniques development of TKIs in biological samples for pharmacokinetic studies and therapeutic drug monitoring

Tyrosine kinase inhibitors (TKIs) have emerged as the first-line small molecule drugs in many cancer therapies, exerting their effects by impeding aberrant cell growth and proliferation through the modulation of tyrosine kinase-mediated signaling pathways. However, there exists a substantial inter-individual variability in the concentrations of certain TKIs and their metabolites, which may render patients with compromised immune function susceptible to diverse infections despite receiving theoretically efficacious anticancer treatments, alongside other potential side effects or adverse reactions. Therefore, an urgent need exists for an up-to-date review concerning the biological matrices relevant to bioanalysis and the sampling methods, clinical pharmacokinetics, and therapeutic drug monitoring of different TKIs. This paper provides a comprehensive overview of the advancements in pretreatment methods, such as protein precipitation (PPT), liquid-liquid extraction (LLE), solid-phase extraction (SPE), micro-SPE (μ-SPE), magnetic SPE (MSPE), and vortex-assisted dispersive SPE (VA-DSPE) achieved since 2017. It also highlights the latest analysis techniques such as newly developed high performance liquid chromatography (HPLC) and high-resolution mass spectrometry (HRMS) methods, capillary electrophoresis (CE), gas chromatography (GC), supercritical fluid chromatography (SFC) procedures, surface plasmon resonance (SPR) assays as well as novel nanoprobes-based biosensing techniques. In addition, a comparison is made between the advantages and disadvantages of different approaches while presenting critical challenges and prospects in pharmacokinetic studies and therapeutic drug monitoring.

Chitosan-Based Biocompatible Copolymers for Thermoresponsive Drug Delivery Systems: On the Development of a Standardization System

Chitosan is a natural polysaccharide that is considered to be biocompatible, biodegradable and non-toxic. The polymer has been used in drug delivery applications for its positive charge, which allows for adhesion with and recognition of biological tissues via non-covalent interactions. In recent times, chitosan has been used for the preparation of graft copolymers with thermoresponsive polymers such as poly-N-vinylcaprolactam (PNVCL) and poly-N-isopropylamide (PNIPAM), allowing the combination of the biodegradability of the natural polymer with the ability to respond to changes in temperature. Due to the growing interest in the utilization of thermoresponsive polymers in the biological context, it is necessary to increase the knowledge of the key principles of thermoresponsivity in order to obtain comparable results between different studies or applications. In the present review, we provide an overview of the basic principles of thermoresponsivity, as well as a description of the main polysaccharides and thermoresponsive materials, with a special focus on chitosan and poly-N-Vinyl caprolactam (PNVCL) and their biomedical applications.

Thermoresponsive Chitosan-Grafted-Poly(N-vinylcaprolactam) Microgels via Ionotropic Gelation for Oncological Applications

Microgels can be considered soft, porous and deformable particles with an internal gel structure swollen by a solvent and an average size between 100 and 1000 nm. Due to their biocompatibility, colloidal stability, their unique dynamicity and the permeability of their architecture, they are emerging as important candidates for drug delivery systems, sensing and biocatalysis. In clinical applications, the research on responsive microgels is aimed at the development of "smart" delivery systems that undergo a critical change in conformation and size in reaction to a change in environmental conditions (temperature, magnetic fields, pH, concentration gradient). Recent achievements in biodegradable polymer fabrication have resulted in new appealing strategies, including the combination of synthetic and natural-origin polymers with inorganic nanoparticles, as well as the possibility of controlling drug release remotely. In this review, we provide a literature review on the use of dual and multi-responsive chitosan-grafted-poly-(N-vinylcaprolactam) (CP) microgels in drug delivery and oncological applications.

Characterization of Thermoresponsive Poly-N-Vinylcaprolactam Polymers for Biological Applications

Poly-N-Vinylcaprolactam (PNVCL) is a thermoresponsive polymer that exhibits lower critical solution temperature (LCST) between 25 and 50 °C. Due to its alleged biocompatibility, this polymer is becoming popular for biomedical and environmental applications. PNVCL with carboxyl terminations has been widely used for the preparation of thermoresponsive copolymers, micro- and nanogels for drug delivery and oncological therapies. However, the fabrication of such specific targeting devices needs standardized and reproducible preparation methods. This requires a deep understanding of how the miscibility behavior of the polymer is affected by its structural properties and the solution environment. In this work, PNVCL-COOH polymers were prepared via free radical polymerization (FRP) in order to exhibit LCST between 33 and 42 °C. The structural properties were investigated with NMR, FT-IR and conductimetric titration and the LCST was calculated via UV-VIS and DLS. The LCST is influenced by the molecular mass, as shown by both DLS and viscosimetric values. Finally, the behavior of the polymer was described as function of its concentration and in presence of different biologically relevant environments, such as aqueous buffers, NaCl solutions and human plasma.

Construction of Fe3O4/SiO2/chitosan-grafted-poly(N-vinylcaprolactam) magnetic nanocomposite and their application in simultaneous extraction of Trans-resveratrol and its metabolites from rat plasma

A novel magnetic nanocomposite of chitosan-grafted-poly(N-vinylcaprolactam) (Fe₃O₄/SiO₂/CHT-g-PNVCL MNC) were synthesized. Chitosan was prepared from shrimp shells Penaeus monodon by a green deacetylation approach. N-vinylcaprolactam was first polymerized on the surface of Fe₃O₄ magnetic nanoparticles using surface-initiated atom transfer radical polymerization. Then, the Fe₃O₄ nanoparticles modified with carboxyl-terminated- poly(N-vinylcaprolactam) was grafted onto chitosan. Various techniques were used to characterize of physicochemical properties of synthesized nanomaterials. The application of Fe₃O₄/SiO₂/CHT-g-PNVCL MNC was utilized as a novel adsorbent for the simultaneous extraction of trans-resveratrol and its major phase II metabolites from rat plasma. A qualitative analysis was performed using ultra-performance liquid chromatography triple-quadrupole tandem mass spectrometry. Response surface methodology based on central composite design was used to optimize the extraction procedure including pH, amount of adsorbent, extraction time, desorption time, and volume of elution solvent. The established quantitative method succeeded in satisfying FDA requirements regarding biological analysis methods. The results of the validation of the method indicated its acceptable accuracy (-4.4 to 6.9%), linearity (r > 0.995), precision (CV < 6.3%), and stability. The lower limits of quantification of the proposed method achieved were 1.23-1.68 ngmL^-1for target analytes. The information obtained from the method validation has been used to estimate the expanded uncertainty for the determination of trans-resveratrol in rat plasma samples following orally administered trans-resveratrol. The method was applied to study the pharmacokinetics, metabolism, and bioavailability of trans-resveratrol in healthy rats following a single oral or intravenous dose.

Au-modified organic/inorganic MWCNT/Cu/PANI hybrid nanocomposite electrode for electrochemical determination of nitrate ions

A new electrochemical sensor is reported for the based on the application of noble bimetal nanoparticles (gold and copper) to polymeric-carbon-modifiers for the reduction of nitrate. This sensor was designed for nitrate ion measurement at the surface of pencil graphite electrode modified by a nanocomposite. The modification was the electrosynthesis of gold nanoparticles on the MWCNT/copper-polyaniline (Cu-PANI) nanocomposite. Physicochemical properties of the synthesized hybrid nanocomposites and their surface performance efficiency are characterized using microscopic, spectroscopic, and electrochemical techniques. At optimized pH, the nitrate peak current (at working potential of 1084 mV versus Ag/AgCl reference electrode) was linear in the concentration range 0.8-30.0 μM with a detection limit of 0.09 μM using differential pulse voltammetry. Modified sensor was successfully implemented to quantify nitrate ions in wastewater resulting from the production line for industrial barium chromate and an example of aqueduct water with appropriate recovery levels. • Aniline was polymerized in phosphoric acid solution using peroxydisulfate as an initiator. • MWCNT@CuNPs@PANNSs@AuNPs nanocomposite on PGE electrode was revealed specific recognition for NO₃^-. • The electrochemical sensor displayed high selectivity and sensitivity for the detection of NO₃^-.

Solid phase extraction-based magnetic carbon nitride/metal organic framework composite with high performance liquid chromatography for the determination of tyrosine kinase inhibitors in urine samples

In this study, a novel solid phase extraction method was constructed to detect three tyrosine kinase inhibitors (TKIs) in urine with a high-performance liquid chromatography-diode array detector. The sorbent MCN/BIF-20 was constructed by magnetic g-C₃N₄ (MCN) and boron imidazole framework-20 (BIF-20) and was characterized by multiple techniques. The experimental results of the adsorption isotherm and adsorption kinetics indicated that the composites had good adsorption of TKIs (148.33 mg g^-1, 283.25 mg g^-1, 188.17 mg g^-1). The reason for the good adsorption property of the complex material was revealed by comparison with each single material. The analytical method was built by a single factor experiment, and was evaluated as a suitable method to detect TKIs in urine by its good accuracy (90.35-98.69%), precision (<3.9%), appropriate detection limits (2.2-3.4 ng mL^-1), and linear ranges (12.5-500 ng mL^-1) with convenient determination coefficients (>0.9997). The performance of the MCN/BIF-20 composite did not decrease dramatically in 3 cycles. These analytical results demonstrated that g-C₃N₄ and BIFs had a bright prospect in sample pretreatment, and the proposed approach based on MCN/BIF-20 was applicable for analysis of TKIs in urine.

Green-photodegradation of model pharmaceutical contaminations over biogenic Fe3O4/Au nanocomposite and antimicrobial activity

A simple biogenic approach for synthesis of Fe₃O₄/Au nanocomposite with 31 nm size using aqueous extract of Carum carvi L. seeds has been reported. Phytochemicals of Carum carvi L. seeds extract play three roles, including reducing, capping, and stabilizing agents during the nanocomposite fabrication process. Resulting nanocomposite was characterized by X-ray diffraction, Fourier-transform infrared spectroscopy, differential reflectance spectroscopy, vibrating-sample magnetometer, energy-dispersive X-ray spectroscopy and X-ray elemental mapping. Differential reflectance spectroscopy investigated optical property and absorption spectra display a sharp absorption agreeing to a bandgap of 1.6 eV. Photocatalytic activity of biogenic Fe₃O₄/Au nanocomposite has been investigated for degradation of imatinib and imipenem drugs under UV and visible light irradiation, due to pharmaceuticals have shown to be recalcitrant in wastewater and conventional wastewater treatments do not remove them, often. Degradation efficiency of imatinib, and imipenem are about 92% and 96% after 1200 s exposure UV light and about 82% and 84% after 3600s exposure visible light in the concentration of 10 ppm drugs. Also, antimicrobial activity of biogenic Fe₃O₄/Au nanocomposite was investigated on three human pathogens and best result can see in 25 mg/mL of nanocomposite versuse Bacillus subtilis that inhibition zone is about 27 mm. Design of nanocomposites capable of simultaneously removing pharmaceutical and microbial contaminations is important in environments such as hospitals wastewater treatment.