Silica-polydopamine hybrids as light-induced oxidase mimics for colorimetric detection of pyrophosphate

Simple, sensitive, colorimetric detection of pyrophosphate via the analyte-triggered decomposition of metal-organic frameworks regulating their adaptive multi-color Tyndall effect

This paper describes initially the application of the Tyndall effect (TE) of metal-organic framework (MOF) materials as a colorimetric signaling strategy for the sensitive detection of pyrophosphate ion (PPi). The used MOF NH2-MIL-101(Fe) was prepared with Fe3+ ions and fluorescent ligands of 2-amino terephthalic acid (NH2-BDC). The fluorescence of NH2-BDC in MOF is quenched due to the ligand-to-metal charge transfer effect, while the NH2-MIL-101(Fe) suspension shows a strong TE. In the presence of PPi analyte, the MOFs will undergo decomposition because of the competitive binding of Fe3+ by PPi over NH2-BDC, resulting in a significant decrease in the TE signal and fluorescence restoration from the released ligands. The results demonstrate that the new method only requires a laser pointer pen (for TE creation) and a smartphone (for portable quantitative readout) to detect PPi in a linear concentration range of 1.25-800 μM, with a detection limit of ~210 nM (3σ) which is ~38 times lower than that obtained from traditional fluorescence with a spectrophotometer (linear concentration range, 50-800 µM; detection limit, 8.15 µM). Moreover, the acceptable recovery of PPi in several real samples (i.e., pond water, black tea, and human serum and urine) ranges from 97.66 to 119.15%.

Synthesis of blue fluorescent molybdenum nanoclusters with novel terephthaldehyde-cysteine Schiff base for detection of pyrophosphate

In this work, terephthaldehyde-cysteine-molybdenum nanoclusters (TPA-Cys-MoNCs) were synthesized by using terephthaldehyde-cysteine (TPA-Cys) Schiff base as a novel ligand. The as-synthesized TPA-Cys-MoNCs showed blue fluorescence under UV lamp at 365 nm, displaying emission peak at 455 nm when excited at 340 nm. The fluorescent TPA-Cys-MoNCs are used as a probe for sensitive assay of pyrophosphate (PPi) via fluorescence quenching mechanism. The emission peak intensity of TPA-Cys-MoNCs at 455 nm exhibited a linear quenching with increasing amount of PPi. As a result, quantitative assay was developed for the detection of PPi (0.01-200 µM) with the detection limit of 0.9 nM. The developed probe was successfully demonstrated for the detection of PPi in biofluids (urine and plasma).

Fluorescent Single-Core and Multi-Core Nanoprobes as Cell Trackers and Magnetic Nanoheaters

Iron oxide magnetic nanoparticles (MNPs) have been widely studied due to their versatility for diagnosis, tracking (magnetic resonance imaging (MRI)) and therapeutic (magnetic hyperthermia and drug delivery) applications. In this work, iron oxide MNPs with different single-core (8–40 nm) and multi-core (140–200 nm) structures were synthesized and functionalized by organic and inorganic coating materials, highlighting their ability as magnetic nanotools to boost cell biotechnological procedures. Single core Fe3O4@PDA, Fe3O4@SiO2-FITC-SiO2 and Fe3O4@SiO2-RITC-SiO2 MNPs were functionalized with fluorescent components with emission at different wavelengths, 424 nm (polydopamine), 515 (fluorescein) and 583 nm (rhodamine), and their ability as transfection and imaging agents was explored with HeLa cells. Moreover, different multi-core iron oxide MNPs (Fe3O4@CS, Fe3O4@SiO2 and Fe3O4@Citrate) coated with organic (citrate and chitosan, CS) and inorganic (silica, SiO2) shells were tested as efficient nanoheaters for magnetic hyperthermia applications for mild thermal heating procedures as an alternative to simple structures based on single-core MNPs. This work highlights the multiple abilities offered by the synergy of the use of external magnetic fields applied on MNPs and their application in different biomedical approaches.

FeMoO4 nanospheres-based nanozymatic colorimetry for rapid and sensitive pyrophosphate detection

Assays of pyrophosphate ion (PPi) are of remarkable biochemical significance due to their vital roles in the bioenergetic and metabolic processes or as disease indicators. Colorimetry is popular in the field of biosensing and detection because of its simplicity, speed and cost-effectiveness, but there is a lack of a suitable colorimetric probe. Herein, a novel colorimetric sensing platform has been established for the detection of pyrophosphate based on the FeMoO₄-H₂O₂-3,3',5,5'-tetra-methylbenzidine (TMB) system. Compared with most previously reported iron-based nanozymes, the as-obtained FeMoO₄ nanospheres with a rough surface possessed a much superior peroxidase-like catalytic activity (V_max = 28.47 × 10^-8 M s^-1) and substrate affinity (K_m = 0.174 mM) toward H₂O₂ catalysis. Due to the Fe(II) and PPi reaction, the presence of PPi could specifically restore blue oxidized TMB to colorless TMB, which led to a decrease in UV absorption at 652 nm. The absorbance change is proportional to the PPi concentration, with a linear detection range (from 0.5 to 25 μM) and a low detection limit of 0.3 μM (S/N = 3). Accordingly, its excellent selectivity and high sensitivity made it a potential colorimetric sensor for PPi analysis in actual water samples.

Copper (II) Ion-Modified Gold Nanoclusters as Peroxidase Mimetics for the Colorimetric Detection of Pyrophosphate

Copper (II) ions have been shown to greatly improve the chemical stability and peroxidase-like activity of gold nanoclusters (AuNCs). Since the affinity between Cu²⁺ and pyrophosphate (PPi) is higher than that between Cu²⁺ and AuNCs, the catalytic activity of AuNCs-Cu²⁺ decreases with the introduction of PPi. Based on this principle, a new colorimetric detection method of PPi with high sensitivity and selectivity was developed by using AuNCs-Cu²⁺ as a probe. Under optimized conditions, the detection limit of PPi was 0.49 nM with a linear range of 0.51 to 30,000 nM. The sensitivity of the method was three orders of magnitude higher than that of a fluorescence method using AuNCs-Cu²⁺ as the probe. Finally, the AuNCs-Cu²⁺ system was successfully applied to directly determine the concentration of PPi in human urine samples.

A novel copper ion sensing fluorescent probe for fast detection of pyrophosphate and alkaline phosphatase

A Cu²⁺ sensing fluorescent probe is synthesized via a Mannich reaction and is applied in the fluorescence detection of pyrophosphate and alkaline phosphatase.

New Mussel Inspired Polydopamine-Like Silica-Based Material for Dye Adsorption

A straightforward and economic procedure has been developed for the synthesis of a new polydopamine-like silica-based material that has been obtained by oxidation of catechol with KIO4 followed by reaction with 3-aminopropyltrimethoxysilane. All techniques adopted for characterization showed that the obtained material is rich in different functional groups and the morphological analyses revealed dimensions in the nanometric range. The hybrid material has been characterized by several techniques showing its polydopamine-like nature, and preliminary observations for dye adsorption have been reported.

One-pot synthesis of luminol–gallium nanoassemblies and their peroxidase-mimetic activity for colorimetric detection of pyrophosphate

Luminol–Ga nanoassemblies exhibit peroxidase-mimetic activity. Colorimetric detection of PPi is developed owing to the formation of a complex between PPi and Ga³⁺.