Photoresponsive heparin ionic complexes toward controllable therapeutic efficacy of anticoagulation

Controllable heparin-release is of great importance and necessity for the precise anticoagulant regulation. Efforts have been made on designing heparin-releasing systems, while, it remains a great challenge for gaining the external-stimuli responsive heparin-release in either intravenous or catheter delivery. In this study, an azobenzene-containing ammonium surfactant is designed and synthesized for the fabrication of photoresponsive heparin ionic complexes through the electrostatic complexation with heparin. Under the assistance of photoinduced trans-cis isomerization of azobenzene, the obtained heparin materials perform reversible athermal phase transition between ordered crystalline and isotropic liquid state at room temperature. Compared to the ordered state, the formation of isotropic state can effectively improve the dissolving of heparin from ionic materials in aqueous condition, which realizes the photo-modulation on the concentration of free heparin molecules. With good biocompatibility, such a heparin-releasing system addresses photoresponsive anticoagulation in both in vitro and in vivo biological studies, confirming its great potential clinical values. This work provides a new designing strategy for gaining anticoagulant regulation by light, also opening new opportunities for the development of photoresponsive drugs and biomedical materials based on biomolecules.

Azobenzene-containing surfactant directs small features of DNA thermotropic liquid crystals via bottom-up and top-down strategies

Compared to classical block copolymers, the self-assembly of small molecules shows an advantage in addressing small features. As a new type of solvent-free ionic complexes, azobenzene-containing DNA thermotropic liquid crystals (TLCs) form an assembly as block copolymers when using small DNA. However, the self-assembly behavior of such biomaterials has not been fully investigated. In this study, photoresponsive DNA TLCs are fabricated by employing an azobenzene-containing surfactant with double flexible chains. For these DNA TLCs, the self-assembly behavior of DNA and surfactants could be guided by the factors of the molar ratio of azobenzene-containing surfactant, dsDNA/ssDNA, and presence or absence of water, which addresses the bottom-up control on domain spacing of mesophase. Meanwhile, such DNA TLCs also gain top-down control on morphology via photoinduced phase change. This work would provide a strategy for regulating the small features of solvent-free biomaterials, facilitating the development of patterning templates based on photoresponsive biomaterials. STATEMENT OF SIGNIFICANCE: The relationship between nanostructure and function is attractive in the science of biomaterials. With biocompatibility and degradability, photoresponsive DNA materials in solutions have been widely studied in biological and medical areas, but they are still hard to obtain in a condensed state. The complex created with designed azobenzene-containing surfactants paves the way for obtaining condensed photoresponsive DNA materials. However, fine control of the small features of such biomaterials has not yet been achieved. In this study, we present a bottom-up strategy of controlling the small features of such DNA materials and, simultaneously, the top-down control of morphology via photoinduced phase change. This work provides a bi-directional approach to controlling the small features of condensed biomaterials.

Photoliquefiable Azobenzene Surfactants toward Solar Thermal Fuels that Upgrade Photon Energy Storage via Molecular Design

Photoresponsive phase change materials (PPCMs) are capable of storing photon and heat energy simultaneously and releasing the stored energy as heat in a controllable way. While, the azobenzene-based PPCMs exhibit a contradiction between gravimetric energy storage density and photoinduced phase change. Here, a type of azobenzene surfactants with balance between molecular free volume and intermolecular interaction is designed in molecular level, which can address the coharvest of photon energy and low-grade heat energy at room temperature. Such PPCMs gain the total gravimetric energy density up to 131.18 J g^-1 by charging solid sample and 160.50 J g^-1 by charging solution. Notably, the molar isomerization enthalpy upgrades by a factor of up to 2.4 compared to azobenzene. The working mechanism is explained by the computational studies. All the stored energy can release out as heat under Vis light, causing a fast surface temperature rise. This study demonstrates a new molecular designing strategy for developing azobenzene-based PPCMs with high gravimetric energy density by improving the photon energy storage.

A reasonably constructed fluorescent chemosensor based on the dicyanoisophorone skeleton for the discriminative sensing of Fe3+ and Hg2+ as well as imaging in HeLa cells and zebrafish

In this study, a new fluorescent sensor dicyanoisophorone Rhodanine-3-acetic acid (DCI-RDA) (DCI-RDA) has been developed by employing a DCI-based push–pull dye as the fluorophore and RDA as the recognition moiety for the simultaneous sensing of Fe³⁺ and Hg²⁺ with a large Stokes Shift (162 nm), high selectivity and sensitivity, and low LOD (1.468 μM for Fe³⁺ and 0.305 μM for Hg²⁺). In particular, DCI-RDA has a short response time (30 s). The Job's plot method in combination with ¹H NMR titration and theoretical calculations was used to determine the stoichiometry of both DCI-RDA-Fe³⁺/Hg²⁺ complexes to be 1 : 1. Moreover, DCI-RDA is applied as a fluorescent probe for imaging in HeLa cells and zebrafish, indicating that it can be potentially applied for Fe³⁺/Hg²⁺ sensing in the field of biology.

A new fluorescent sensor dicyanoisophorone rhodanine-3-acetic acid has been developed by employing a DCI-based push–pull dye as the fluorophore and RDA as the recognition moiety for the simultaneous sensing of Fe³⁺ and Hg²⁺.

Thermodynamic stability of cis-azobenzene containing DNA materials based on van der Waals forces

Taking advantage of van der Waals forces, an azobenzene-containing surfactant with a stable cis-state was designed and synthesized to fabricate photoresponsive DNA material. The reported DNA material exhibited reversible liquid crystalline-to-isotropic liquid transition under UV/Vis illuminations via the trans-cis isomerization of azobenzene. It also gained the ability to maintain the isotropic liquid state after UV light had ceased thanks to the thermodynamic stability of the cis-isomer of the azobenzene-containing surfactant. This work provides a design strategy for fabricating photoresponsive phase-change biomaterials.

Photoregulative phase change biomaterials showing thermodynamic and mchanical stabilities

Azobenzenes are great photochromic molecules for switching the physical properties of various materials via trans-cis isomerization. However, the UV light resulted cis-azobenzene is metastable and thermodynamically gets back to trans-azobenzene after ceasing UV irradiation, which causes an unwanted property change of azobenzene-containing materials. Additionally, thermal and mechanical conditions would accelerate this process dramatically. In this present work, a new type of azobenzene-containing surfactant is designed for the fabrication of photoresponsive phase change biomaterials. With a "locked" cis-azobenzene conformation, the resulting biomaterials could maintain their disordered state after ceasing UV light, which exhibit great resistance to thermal and piezo conditions. Interestingly, the "locked" cis-azobenzene could be unlocked by Vis light in high efficiency, which opens a new way for the design of phase change materials only responding to light. By showing stable cis-azobenzene maintained physical state, the newly fabricated biomaterials provide new potential for the construction of advanced materials, like self-healing materials, with less use of long time UV irradiation for maintaining their disordered states.

Fluorescence Based Comparative Sensing Behavior of the Nano-Composites of SiO2 and TiO2 towards Toxic Hg2+ Ions

We have synthesized sulfonamide based nano-composites of SiO2 and TiO2 for selective and sensitive determination of toxic metal ion Hg2+ in aqueous medium. Nano-composites (11) and (12) were morphologically characterized with FT-IR, solid state NMR, UV-vis, FE SEM, TEM, EDX, BET, pXRD and elemental analysis. The comparative sensing behavior, pH effect and sensor concentrations were carried out with fluorescence signaling on spectrofluorometer and nano-composites (11) and (12), both were evaluated as "turn-on" fluorescence detector for the toxic Hg2+ ions. The LODs were calculated to be 41.2 and 18.8 nM, respectively of nano-composites (11) and (12). The detection limit of TiO2 based nano-composites was found comparatively lower than the SiO2 based nano-composites.

Photoswitchable solvent-free DNA thermotropic liquid crystals toward self-erasable shape information recording biomaterials

Soft thermotropic liquid crystals (TLCs) have advantages on processability and shape memory compared to hard solids and fluids. The development of photoswitchable soft TLCs based on biomolecules would afford reworkable shape information recording biomaterials for the areas requiring biocompatibility and degradability. In recent years, anhydrous DNA TLCs composed of DNA and ammonium surfactants have been receiving continuous attention. However, the photoswitchable phase transition has not been realized for soft DNA TLCs at room temperature, owing to the absence of functional ammonium surfactant. Herein, a new type of azobenzene-containing surfactant would be applied to the fabrication of soft DNA TLCs with photoresponsive physical properties. The double-chain design of the used surfactant and the use of DOAB as a dopant guarantee the soft state of DNA TLCs at r.t., which also facilitates the azobenzene isomerization by reducing the packing density of surfactants. With the assistance of photoisomerization of azobenzene, the reported DNA TLCs achieve reversible liquid crystal-isotropic liquid transition at temperatures below clearing points even at room temperature. The repeatable shape information recording and self-erasing tests indicate these DNA TLCs would be good shape information recording biomaterials in the future. This work also provides a useful strategy for designing photoresponsive soft biomaterials based on rigid biomolecules like DNA.

Photoliquefiable DNA-surfactant ionic crystals: Anhydrous self-healing biomaterials at room temperature

Development of photoliquefiable solid-state biomaterials at room temperature would address scientific challenges in life science. However, external stimuli-induced phase transitions are difficult for some biomacromolecules based materials, due to the high rigidity of these biomolecules. In this present work, by delicate molecule design on azobenzene-type ammonium surfactants, two new types of DNA-surfactant materials are fabricated. At room temperature, these DNA materials show photoliquefaction of ionic crystals to isotropic liquids under UV light, and fast self-assembly from isotropic liquids back to crystals after ceasing UV light, under the assistance of azobenzene isomerization. To achieve this objective, the designed solid-state DNA materials should have melting points near room temperature and an immediate liquid crystal to isotropic liquid transition process just above the melting points, which highly depends on the stoichiometric charge ratio between DNA and surfactants. As proved by the successful self-healing tests, these DNA ionic crystals are good biomaterials with potential applications in biomedicine and life science. This work would provide a new strategy for designing anhydrous functional biomaterials at room temperature by using rigid biomacromolecules. STATEMENT OF SIGNIFICANCE: At room temperature, solid-state biomaterials with photoregulated crystal⇄isotropic liquid phase transition property are attractive functional materials in life science, considering the body temperature and living environment temperature of human beings. Although several kinds of anhydrous materials achieved isothermal photoresponsive phase transitions, the photoregulated phase transition of anhydrous biomacromolecules based materials has not been achieved at room temperature, due to the high rigidity of these biomolecules. In this work, by delicate molecule design on ammonium surfactants, we synthesized two kinds of anhydrous DNA-surfactants ionic crystals. These DNA materials show fast photoliquefaction under UV light and self-assembly after ceasing light, which affords excellent self-healing biomaterials. This work would provide a new strategy for designing anhydrous photoresponsive biomaterials by using rigid biomacromolecules.

Mercury Toxicity and Detection Using Chromo-Fluorogenic Chemosensors

Mercury (Hg), this non-essential heavy metal released from both industrial and natural sources entered into living bodies, and cause grievous detrimental effects to the human health and ecosystem. The monitoring of Hg2+ excessive accumulation can be beneficial to fight against the risk associated with mercury toxicity to living systems. Therefore, there is an emergent need of novel and facile analytical approaches for the monitoring of mercury levels in various environmental, industrial, and biological samples. The chromo-fluorogenic chemosensors possess the attractive analytical parameters of low-cost, enhanced detection ability with high sensitivity, simplicity, rapid on-site monitoring ability, etc. This review was narrated to summarize the mercuric ion selective chromo-fluorogenic chemosensors reported in the year 2020. The design of sensors, mechanisms, fluorophores used, analytical performance, etc. are summarized and discussed.

A novel benzothiadiazole-based and NIR-emissive fluorescent sensor for detection of Hg2+ and its application in living cell and zebrafish imaging

The probe TBBA exhibited excellent analytical properties with a remarkably large Stokes shift (195 nm), rapid response, high selectivity and sensitivity, good binding constant (2.37 × 10⁴ M⁻¹) and low LOD (13.10 nM).