A facile and universal strategy to endow implant materials with antibacterial ability via alkalinity disturbing bacterial respiration

In vitro co-culture models for the assessment of orthopedic antibacterial biomaterials

The antibacterial biofunctionality of bone implants is essential for the prevention and treatment of implant-associated infections (IAI). In vitro co-culture models are utilized to assess this and study bacteria-host cell interactions at the implant interface, aiding our understanding of biomaterial and the immune response against IAI without impeding the peri-implant bone tissue regeneration. This paper reviews existing co-culture models together with their characteristics, results, and clinical relevance. A total of 36 studies were found involving in vitro co-culture models between bacteria and osteogenic or immune cells at the interface with orthopedic antibacterial biomaterials. Most studies (∼67%) involved co-culture models of osteogenic cells and bacteria (osteo-bac), while 33% were co-culture models of immune cells and bacterial cells (im-bac). All models involve direct co-culture of two different cell types. The cell seeding sequence (simultaneous, bacteria-first, and cell-first) was used to mimic clinically relevant conditions and showed the greatest effect on the outcome for both types of co-culture models. The im-bac models are considered more relevant for early peri-implant infections, whereas the osteo-bac models suit late infections. The limitations of the current models and future directions to develop more relevant co-culture models to address specific research questions are also discussed.

Electrophoretic deposition of magnesium oxide coating on micro-arc oxidized titanium for antibacterial activity and biocompatibility

Titanium (Ti) dental implants face risks of early failure due to bacterial adhesion and biofilm formation. It is thus necessary to endow the implant surface with antibacterial ability. In this study, magnesium oxide (MgO) coatings were prepared on Ti by combining micro-arc oxidation (MAO) and electrophoretic deposition (EPD). The MgO nanoparticles homogeneously deposited on the microporous surface of MAO-treated Ti, yielding increasing coverage with the EPD time increased to 15 to 60 s. After co-culture with Porphyromonas gingivalis (P. gingivalis) for 24 h, 48 h, and 72 h, the coatings produced antibacterial rates of 4-53 %, 27-71 %, and 39-79 %, respectively, in a dose-dependent manner. Overall, EPD for 45 s offered satisfactory comprehensive performance, with an antibacterial rate 79 % at 72 h and a relative cell viability 85 % at 5 d. Electron and fluorescence microscopies revealed that, both the density of adherent bacterial adhesion on the surface and the proportion of viable bacteria decreased with the EPD time. The morphology of cells on the surface of each group was intact and there was no significant difference among the groups. These results show that, the MgO coating deposited on MAO-treated Ti by EPD had reasonably good in vitro antibacterial properties and cytocompatibility.

Bioactive Dental Resin Composites with MgO Nanoparticles

Photoactivating dental resin composites have been the most prevailing material for repairing dental defects in various clinical scenarios due to their multiple advantages. However, compared to other restorative materials, the surface of resin-based composites is more susceptible to plaque biofilm accumulation, which can lead to secondary caries and restoration failure. This study introduced different weight fractions (1, 2, 5, 10, and 15%) of magnesium oxide nanoparticles (MgONPs) as antibacterial fillers into dental resin composites. Multifarious properties of the material were investigated, including antibacterial activity against a human salivary plaque-derived biofilm, cytotoxicity on human gingival fibroblasts, mechanical and physicochemical properties as well as the performance when subjected to thermocycling aging treatment. Results showed that the incorporation of MgONPs significantly improved the composites' anti-biofilm capability even at a low amount of 2 wt % without compromising the mechanical, physicochemical, and biocompatibility performances. The results of the thermocycling test suggested certain of aging resistance. Moreover, a small amount of MgONPs possibly made a difference in enhancing photoactivated polymerization and increasing the curing depth of experimental resin composites. Overall, this study highlights the potential of MgONPs as an effective strategy for developing antibacterial resin composites, which may help mitigating cariogenic biofilm-associated secondary caries.

Collaborative Design of MgO/FeOx Nanosheets on Titanium: Combining Therapy with Regeneration

The repair of bone defects caused by osteosarcoma resection remains a clinical challenge because of the tumor recurrence and bacterial infection. Combining tumor and bacterial therapy with bone regeneration properties in bone implants is a promising strategy for the treatment of osteosarcoma. Here, a layer of MgO/FeO_x nanosheet is constructed on the Ti implant to prevent tumor recurrence and bacterial infection, while simultaneously accelerating bone formation. This MgO/FeO_x double metal oxide demonstrates good peroxidase activity to catalyze H₂ O₂ , which is rich in tumor microenvironment, to form reactive oxygen species (ROS), and shows good photothermal conversion capacity to produce photothermal effect, thus synergistically killing tumor cells and eliminating tumor tissue. In addition, it generates a local alkaline surface microenvironment to inhibit the energy metabolism of bacteria to enhance the photothermal antibacterial effect. Furthermore, benefiting from the generation of a Mg ion-containing alkaline microenvironment, this MgO/FeO_x film can promote the osteogenic differentiation of osteoblast and angiogenesis of vascular endothelial cells in vitro as well as accelerated bone formation in vivo. This study proposes a multifunctional platform for integrating tumor and bacterial therapy and bone regeneration, which has good application prospects for the treatment of osteosarcoma.

Antibacterial Nanomaterials: Mechanisms, Impacts on Antimicrobial Resistance and Design Principles

Antimicrobial resistance (AMR) is one of the biggest threats to the environment and health. AMR rapidly invalidates conventional antibiotics, and antimicrobial nanomaterials have been increasingly explored as alternatives. Interestingly, several antimicrobial nanomaterials show AMR-independent antimicrobial effects without detectable new resistance and have therefore been suggested to prevent AMR evolution. In contrast, some are found to trigger the evolution of AMR. Given these seemingly conflicting findings, a timely discussion of the two faces of antimicrobial nanomaterials is urgently needed. This review systematically compares the killing mechanisms and structure-activity relationships of antibiotics and antimicrobial nanomaterials. We then focus on nano-microbe interactions to elucidate the impacts of molecular initiating events on AMR evolution. Finally, we provide an outlook on future antimicrobial nanomaterials and propose design principles for the prevention of AMR evolution.

Can dietary magnesium sources and buffer change the ruminal microbiota composition and fermentation of lactating dairy cows?

Magnesium oxide (MgO) is one of the most used Mg supplements in livestock. However, to avoid relying upon only one Mg source, it is important to have alternative Mg sources. Therefore, the objective of this study was to evaluate the effects of the interaction of two Mg sources with buffer use on the ruminal microbiota composition, ruminal fermentation, and nutrient digestibility in lactating dairy cows. Twenty lactating Holstein cows were blocked by parity and days in milk into five blocks with four cows each, in a 2 × 2 factorial design. Within blocks, cows were assigned to one of four treatments: 1) MgO; 2) MgO + Na sesquicarbonate (MgO+); 3) calcium-magnesium hydroxide (CaMgOH); 4) CaMgOH + Na sesquicarbonate (CaMgOH+). For 60 d, cows were individually fed a corn silage-based diet, and treatments were top-dressed. Ruminal fluid was collected via an orogastric tube, for analyses of the microbiota composition, volatile fatty acids (VFA), lactate, and ammonia nitrogen (NH3-N). The microbiota composition was analyzed using V4/16S rRNA gene sequencing, and taxonomy was assigned using the Silva database. Statistical analysis was carried out following the procedures of block design analysis, where block and cow were considered random variables. Effects of Mg source, buffer, and the interaction between Mg Source × Buffer were analyzed through orthogonal contrasts. There was no interaction effect of the two factors evaluated. There was a greater concentration of NH3-N, lactate, and butyrate in the ruminal fluid of cows fed with CaMg(OH)2, regardless of the buffer use. The increase in these fermentation intermediates/ end-products can be explained by an increase in abundance of micro-organisms of the genus Prevotella, Lactobacillus, and Butyrivibrio, which are micro-organisms mainly responsible for proteolysis, lactate-production, and butyrate-production in the rumen, respectively. Also, dietary buffer use did not affect the ruminal fermentation metabolites and pH; however, an improvement of the apparent total tract digestibility of dry matter (DM), organic matter (OM), neutral fiber detergent (NDF), and acid fiber detergent (ADF) were found for animals fed with dietary buffer. In summary, there was no interaction effect of buffer use and Mg source, whereas buffer improved total tract apparent digestibility of DM and OM through an increase in NDF and ADF digestibility and CaMg(OH)2 increased ruminal concentration of butyrate and abundance of butyrate-producing bacteria.

Dual-Responsive Nanocomposites for Synergistic Antibacterial Therapies Facilitating Bacteria-Infected Wound Healing

The rising dangers of bacterial infections have created an urgent need for the development of a new generation of antibacterial technologies and therapeutics. Antibacterial photodynamic therapy (PDT), considered as a noninvasive treatment with no drug resistance, has become a new promising photochemistry-involved treatment strategy. Titanium oxide (TiO₂ ) is proved to be a very efficient PDT agent among the photosensitive materials, while the property of a large bandgap of TiO₂ makes it only be excited by ultraviolet light, which is harmful to organisms. In this work, a novel ligand-to-metal charge transfer (LMCT) mediated TiO₂ PDT strategy is proposed via the harmless near-infrared light irradiation. By choosing a mussel-inspired material, polydopamine (PDA) is involved in forming mesoporous TiO₂ @PDA nanoparticles (mTiO₂ @PDA NPs). The catechol groups of PDA can attach the TiO₂ tightly even in colloidal environments, and can also form the LMCT bridge, exciting TiO₂ to exert PDT function via 808 nm irradiation. Combining the sonodynamic therapy (SDT) of TiO₂ and the photothermal therapy properties of PDA, this simple structure mTiO₂ @PDA enables synergistic antibacterial applications with multiple functions under the dual excitation of NIR and ultrasound. This reliable all-in-one NPs can achieve great antibacterial effect and a rapid repair of infected wounds.

Enhanced Bactericidal Effect of Calcinated Mg-Fe Layered Double Hydroxide Films Driven by the Fenton Reaction

Osteogenic and antibacterial abilities are the permanent pursuit of titanium (Ti)-based orthopedic implants. However, it is difficult to strike the right balance between these two properties. It has been proved that an appropriate alkaline microenvironment formed by Ti modified by magnesium-aluminum layered double hydroxides (Mg-Al LDHs) could achieve the selective killing of bacteria and promote osteogenesis. However, the existence of Al induces biosafety concerns. In this study, iron (Fe), an essential trace element in the human body, was used to substitute Al, and a calcinated Mg-Fe LDH film was constructed on Ti. The results showed that a proper local alkaline environment created by the constructed film could enhance the antibacterial and osteogenic properties of the material. In addition, the introduction of Fe promoted the Fenton reaction and could produce reactive oxygen species in the infection environment, which might further strengthen the in vivo bactericidal effect.

Application and potential of multifrequency ultrasound in juice industry: Comprehensive analysis of inactivation and germination of Alicyclobacillus acidoterrestris spores

The majority of acidic fruits are perishable owing to their high-water activity, which promotes microbial activity, thus exhibiting metabolic functions that cause spoilage. Along with sanitary practices, several treatments are used during processing and/or storage to inhibit the development of undesirable bacteria. To overcome the challenges caused by mild heat treatment, juice manufacturers have recently increased their involvement in developing novel non-thermal processing procedures. Ultrasonication alone or in combination with other hurdle technologies may be used to pasteurize processed fruit juices. Multifrequency ultrasound has gained popularity due to the fact that mono-frequency ultrasound has less impact on bacterial inactivation and bioactive compound enhancement of fruit juice. Here, we present and discuss the fundamental information and technological knowledge of how spoilage bacteria, specifically Alicyclobacillus acidoterrestris, assemble resistant spores and inactivate and germinate dormant spores in response to nutrient germinants and physical treatments such as heat and ultrasound. To the authors' knowledge, no prior review of ultrasonic inactivation and germination of A. acidoterrestris in fruit juice exists. Therefore, this article aims to provide a review of previously published research on the inactivation and germination of A. acidoterrestris in fruit juice by ultrasound and heat.

Layered Double Hydroxide-Based Micro "Chemical Factory" with Arsenic Processing and Screening Functions on Nitinol for Gallbladder Cancer Treatment

Gallbladder cancer is a common malignant tumor of the biliary system with a high fatality rate. Nitinol (Ni-Ti) stents, a standard treatment for prolonging patients' lives, are susceptible to reocclusion and cannot inhibit tumor recurrence because they lack antitumor and antibacterial activity. Herein, an arsenic-loaded layered double-hydroxide film is constructed on Ni-Ti, forming a micro "chemical factory." The LDH plays the role of a "processer" which absorbs highly toxic trivalent arsenic (As(III)) and processes it into lowly toxic pentavalent arsenic (As(V)). It also acts as a "quality-inspector," confining As(III) in the interlayer and releasing only As(V) (the finished product) to the outside. This control mechanism minimizes the toxicity during contact with normal tissue. The acidic microenvironment and overexpression of glutathione in tumor tissues not only accelerates the release of arsenic from the platform but also triggers the in situ transformation of arsenic from lowly toxic As(V) to highly toxic As(III), exerting a strong arsenic-mediated antineoplastic effect. Such a microenvironment-responsive "chemical factory" with arsenic processing and screening functions is expected to prevent tumor overgrowth, metastasis, and bacterial infection and provide new insights into the design of Ni-Ti drug-eluting stents for gallbladder cancer treatment.

Antimicrobial coating strategy to prevent orthopaedic device-related infections: recent advances and future perspectives

The rapid development of multidrug-resistant (MDR) bacteria and biofilm-related infections (BRIs) has urgently called for new strategies to combat severe orthopaedic device-related infections (ODRIs). Antimicrobial coating has emerged as a promising strategy in halting the incidence of ODRIs and treating ODRIs in long term. With the advancement of material science and biotechnology, numerous antimicrobial coatings have been reported in literature, showing superior antimicrobial and osteogenic functions. This review has specifically discussed the currently developed antimicrobial coatings in the perspective of drug release from the coating system, focusing on their realization of controlled and on demand antimicrobial agents release, as well as multi-functionality. Acknowledging the multidisciplinary nature of antimicrobial coating, the conceptual design, the deposition method and the therapeutic effect of the antimicrobial coatings have been described in detail and discussed critically. Particularly, the challenges and opportunities on the way toward the clinical translation of antimicrobial coatings have been highlighted.

Mg-Fe layered double hydroxides modified titanium enhanced the adhesion of human gingival fibroblasts through regulation of local pH level

The durability of dental implants is closely related to osseointegration and surrounding soft tissue sealing. Appropriate local pH favors fibroblasts adhesion and contributes to soft tissue sealing. Layered double hydroxides (LDHs) are characterized by adjustable alkalinity, offering a possibility to investigate the influence of pH on cellular behaviors. Herein, we fabricated MgFe LDHs modified titanium. During calcination, the local pH value of LDHs increase, without altering other physics and chemical properties via OH^- exchange mechanism. In vitro studies showed that LDHs films calcined at 250 °C for 2 h provide a local pH of 10.17, which promote early adhesion, proliferation, and type I collagen expression of human gingival fibroblasts (hGFs) through the formation of focal adhesion complex and activation of focal adhesion kinase related signaling pathways. In conclusion, endowing the titanium surface with appropriate alkalinity by MgFe LDHs films enhances the adhesion of hGFs, providing a new strategy of designing multifunctional biomaterials for soft tissue sealing around dental implants.

Impact of High-Altitude Hypoxia on Early Osseointegration With Bioactive Titanium

Nowadays, the bone osseointegration in different environments is comparable, but the mechanism is unclear. This study aimed to investigate the osseointegration of different bioactive titanium surfaces under normoxic or high-altitude hypoxic environments. Titanium implants were subjected to one of two surface treatments: (1) sanding, blasting, and acid etching to obtain a rough surface, or (2) extensive polishing to obtain a smooth surface. Changes in the morphology, proliferation, and protein expression of osteoblasts on the rough and smooth surfaces were examined, and bone formation was studied through western blotting and animal-based experiments. Our findings found that a hypoxic environment and rough titanium implant surface promoted the osteogenic differentiation of osteoblasts and activated the JAK1/STAT1/HIF-1α pathway in vitro. The animal study revealed that following implant insertion in tibia of rabbit, bone repair at high altitudes was slower than that at low altitudes (i.e., in plains) after 2weeks; however, bone formation did not differ significantly after 4weeks. The results of our study showed that: (1) The altitude hypoxia environment would affect the early osseointegration of titanium implants while titanium implants with rough surfaces can mitigate the effects of this hypoxic environment on osseointegration, (2) the mechanism may be related to the activation of JAK1/STAT1/HIF-1α pathway, and (3) our results suggest the osteogenesis of titanium implants, such as oral implants, is closely related to the oxygen environment. Clinical doctors, especially dentists, should pay attention to the influence of hypoxia on early osseointegration in patients with high altitude. For example, it is better to choose an implant system with rough implant surface in the oral cavity of patients with tooth loss at high altitude.

Double-edged effects caused by magnesium ions and alkaline environment regulate bioactivities of magnesium-incorporated silicocarnotite in vitro

Magnesium (Mg) is an important element for its enhanced osteogenic and angiogenic properties in vitro and in vivo, however, the inherent alkalinity is the adverse factor that needs further attention. In order to study the role of alkalinity in regulating osteogenesis and angiogenesis in vitro, magnesium-silicocarnotite [Mg-Ca₅(PO₄)₂SiO₄, Mg-CPS] was designed and fabricated. In this study, Mg-CPS showed better osteogenic and angiogenic properties than CPS within 10 wt.% magnesium oxide (MgO), since the adversity of alkaline condition was covered by the benefits of improved Mg ion concentrations through activating Smad2/3-Runx2 signaling pathway in MC3T3-E1 cells and PI3K-AKT signaling pathway in human umbilical vein endothelial cells in vitro. Besides, provided that MgO was incorporated with 15 wt.% in CPS, the bioactivities had declined due to the environment consisting of higher-concentrated Mg ions, stronger alkalinity and lower Ca/P/Si ions caused. According to the results, it indicated that bioactivities of Mg-CPS in vitro were regulated by the double-edged effects, which were the consequence of Mg ions and alkaline environment combined. Therefore, if MgO is properly incorporated in CPS, the improved bioactivities could cover alkaline adversity, making Mg-CPS bioceramics promising in orthopedic clinical application for its enhancement of osteogenesis and angiogenesis in vitro.

Biomedical Implants with Charge-Transfer Monitoring and Regulating Abilities

Transmembrane charge (ion/electron) transfer is essential for maintaining cellular homeostasis and is involved in many biological processes, from protein synthesis to embryonic development in organisms. Designing implant devices that can detect or regulate cellular transmembrane charge transfer is expected to sense and modulate the behaviors of host cells and tissues. Thus, charge transfer can be regarded as a bridge connecting living systems and human-made implantable devices. This review describes the mode and mechanism of charge transfer between organisms and nonliving materials, and summarizes the strategies to endow implants with charge-transfer regulating or monitoring abilities. Furthermore, three major charge-transfer controlling systems, including wired, self-activated, and stimuli-responsive biomedical implants, as well as the design principles and pivotal materials are systematically elaborated. The clinical challenges and the prospects for future development of these implant devices are also discussed.

Gallium (Ga)-strontium (Sr) layered double hydroxide composite coating on titanium substrates for enhanced osteogenic and antibacterial abilities

Bacterial infection and poor osteogenic capacity can result in the loosing or failure of titanium (Ti)-based implants in the clinic. Therefore, it is urgent to design an effective approach to enhance the osteogenic property and restrict bacterial activity. In this study, a layered double hydroxide (LDH) composed of Ga and Sr ions on Ti substrates by a hydrothermal method, then calcined in 250°C and denoted as LDH250. The scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were confirmed that the LDH films were successfully formed on the Ti substrates. Importantly, the obtained LDH films can induce an alkaline microenvironment around the Ti surface and regulate the behaviors of osteogenic cells and bacteria. In vitro cellular experiments, the LDH250 can enhance the differentiation of both MC3T3-E1 cells and osteoblasts, stimulate alkaline phosphatase activity (ALP), collagen secretion, and mineralization levels. Meanwhile, antimicrobial assay against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) demonstrated that the LDH250 samples had strong antibacterial abilities, which attributed to the release profile of Ga³⁺ could act as a "Trojan horse" to destroy the bacterial iron metabolism, inducing of local alkaline environment, and producing reactive oxygen species. Hence, this study provides an effective method for reducing antibacterial infection and enhancing the bone integrative capacity of Ti-based implants for orthopedic applications.

Biological sealing and integration of a fibrinogen-modified titanium alloy with soft and hard tissues in a rat model

Percutaneous or transcutaneous devices are important and unique, and the corresponding biological sealing at the skin-implant interface is the key to their long-term success. Herein, we investigated the surface modification to enhance biological sealing, using a metal sheet and screw bonded by biomacromolecule fibrinogen mediated via pre-deposited synthetic macromolecule polydopamine (PDA) as a demonstration. We examined the effects of a Ti-6Al-4V titanium alloy modified with fibrinogen (Ti-Fg), PDA (Ti-PDA) or their combination (Ti-PDA-Fg) on the biological sealing and integration with skin and bone tissues. Human epidermal keratinocytes (HaCaT), human foreskin fibroblasts (HFF) and preosteoblasts (MC3T3-E1), which are closely related to percutaneous implants, exhibited better adhesion and spreading on all the three modified sheets compared with the unmodified alloy. After three-week subcutaneous implantation in Sprague-Dawley (SD) rats, the Ti-PDA-Fg sheets could significantly attenuate the soft tissue response and promote angiogenesis compared with other groups. Furthermore, in the model of percutaneous tibial implantation in SD rats, the Ti-PDA-Fg screws dramatically inhibited epithelial downgrowth and promoted new bone formation. Hence, the covalent immobilization of fibrinogen through the precoating of PDA is promising for enhanced biological sealing and osseointegration of metal implants with soft and hard tissues, which is critical for an orthopedic percutaneous medical device.

Quality attributes optimization of orange juice subjected to multi-frequency thermosonication: Alicyclobacillus acidoterrestris spore inactivation and applied spectroscopy ROS characterization

This is the first time to investigate the synergistic inactivation effect and mechanism of multifrequency ultrasound (MTUS) on A. acidoterrestris (AAT) vegetative cells and spores, nutrients and enzymes of orange juice. The optimized results of MTUS (using Box Behnken design- surface responsemethodology) and further comparison with different mode of ultrasound (mono-and multi-frequency) revealed that 20/40 kHz, 24 min and 64 °C were the best optimum results. The AAT spores and vegetative cells were inactivated by 2 and 4 logs, respectively, without deteriorating orange juice contents. In addition, AAT inactivation indicated an inversely proportional relationship with ROS production. FT-IR and UV-Vis spectroscopy characterization confirmed the existence of ROS in treated orange juice and LF-NMR analysis confirmed the inactivation of AAT spores. The findings illustrated the successfully used dual-frequency ultrasound technology for fruit beverages, promoting beneficial changes in physical properties without any significant effects on the quality of ascorbic acid.

Data for microbe resistant engineered recombinant spider silk protein based 2D and 3D materials

Data presented in this article describe bacterial and fungal repellent properties of 2D-films and 3D-hydrogels made of different recombinantly produced spider silk proteins based on consensus sequences of Araneus diadematus dragline silk proteins (fibroin 3 and 4). Here, the attachment, growth, and microbial colonization of Streptococcus mutans (S. mutans) as well as Candida albicans (C. albicans) on plane and micro-patterned films were visualized by scanning electron microscopy (SEM). Also, microbial viability data are provided of Escherichia coli (E. coli) and Pichia pastoris (P. pastoris) on hydrogels made of eADF4(C16) and eADF4(C16)-RGD, quantified using the Alamar blue assay. Experimental results, design of a post-operative contamination model of microbes with mammalian cells, and methods in the data article refer to the research paper "Engineered spider silk-based 2D and 3D materials prevent microbial infestation" published recently [1].