Bromopyrene Symphony: Synthesis and Characterisation of Isomeric Derivatives at Non-K Region and Nodal Positions for Diverse Functionalisation Strategies

Pyrene, a renowned aromatic hydrocarbon, continues to captivate researchers due to its versatile properties and potential applications across various scientific domains. Among its derivatives, bromopyrenes stand out for their significance in synthetic chemistry, materials science, and environmental studies. The strategic functionalisation of pyrene at non-K region and nodal positions is crucial for expanding its utility, allowing for diverse functionalisation strategies. Bromo-substituted precursors serve as vital intermediates in synthetic routes; however, the substitution pattern of bromoderivatives significantly impacts their subsequent functionalisation and properties, posing challenges in synthesis and purification. Understanding the distinct electronic structure of pyrene is pivotal, dictating the preferential electrophilic aromatic substitution reactions at specific positions. Despite the wealth of literature, contradictions and complexities persist in synthesising suitably substituted bromopyrenes due to the unpredictable nature of substitution reactions. Building upon historical precedents, this study provides a comprehensive overview of bromine introduction in pyrene derivatives, offering optimised synthesis conditions based on laboratory research. Specifically, the synthesis of mono-, di-, tri-, and tetrabromopyrene isomers at non-K positions (1-, 3-, 6-, 8-) and nodal positions (2-, 7-) is systematically explored. By elucidating efficient synthetic methodologies and reaction conditions, this research contributes to advancing the synthesis and functionalisation strategies of pyrene derivatives, unlocking new possibilities for their utilisation in various fields.

Oxidative Cycloaddition Reactions of Arylboron Reagents via a One-pot Formal Dehydroboration Sequence

Arylboron compounds are widely available and synthetically useful reagents in which the boron group is typically substituted. Herein, we show that the boron group and ortho-hydrogen atom are substituted in a formal cycloaddition reaction. This transformation is enabled by a one-pot sequence involving diaryliodonium and aryne intermediates. The scope of arylboron reagents and arynophiles is demonstrated, and the method is applied to the formal synthesis of an investigational drug candidate.

Synthesis of Arynes via Formal Dehydrogenation of Arenes

Arynes offer immense potential for diversification of benzenoid rings, which occur in pharmaceuticals, agrochemicals, and liquid crystals. However, accessing these high-energy intermediates requires synthetic precursors, which involve either harsh conditions or multistep syntheses. The development of alternative methods to access arynes using simpler substrates and milder conditions is necessary for a more streamlined approach. Here, we describe a two-step formal dehydrogenation of simple arenes to generate arynes at a remote position relative to traditionally reactive groups, e.g., halides. This approach is enabled by regioselective installation and ejection of an "onium" leaving group, and we demonstrate the compatibility of simple arenes (20 examples) and arynophiles (8 examples). Moreover, through direct comparison, we show that our formal dehydrogenation method is both more functional group tolerant and efficient in generating arynes than the current state-of-the-art aryne precursors. Finally, we show that aryne intermediates offer opportunities for regioselective C-H amination that are distinct from other methods.

Conjugated Polymers Containing EDOT Units as Novel Materials for Electrochromic and Resistance Memory Devices

Four new multifunctional polymers (P1, P2, P3, and P4) containing EDOT units were synthesized by the Stille coupling reaction. A PL spectrum test found that the introduction of large conjugated groups led to strong fluorescence emission in all polymers. Among the electrochromic and switch properties, these polymer films exhibited reversible color changes, as well as good coloring efficiency. Electrochemical experiments found that the initial oxidation potentials of the polymers were 1.27 V, 1.67 V, 1.78 V, and 1.58 V, respectively. Among them, P3 showed a higher coloring efficiency (283.3 cm²·C^-1), and P2 showed a shorter response time (t_c = 2.2 s, t_b = 2.8 s). These polymers all exhibited electrochromic and resistive switching storage characteristics. They have good solubility in many organic solvents. In the resistance switch memory characteristics, all polymers had obvious memristive properties, and P4 exhibited a larger switch current ratio (2527.42) and a smaller threshold voltage (0.9 V).

Straightforward Synthesis of Highly Functionalized Indanes and Tetralines through Ene-Cyclopropene Rearrangement Mediated by Ruthenium

Ene-cyclopropenes give functionalized indanes and tetralines in the presence of ruthenium dimeric catalysts. This reaction involves the cyclopropene opening by the metal catalysts with a different regioselectivity respective to gold chlorides and produces totally different products than when using semisandwich ruthenium complexes. Here, the process leads to a bridged 7-oxanorbornene-type intermediate that is converted into a functionalized aromatic ring through deoxygenative aromatization. Alternative reaction pathways occur with substrates with no possible aromatization.

Synthesis, Aromatization and Cavitates of an Oxanorbornene-Fused Dibenzo[de, qr]tetracene Nanobox

Oxanorbornene-fused double-stranded macrocycles, represented by kohnkene, are not only synthetic precursors toward short segments of zigzag carbon nanotubes but also typical cavitands processing an intrinsic cavity. However, their capability to bind guest molecules in solution remained unexplored. Herein we report a new member of oxanorbornene-fused double-stranded macrocycles, which is named a nanobox herein because of its shape. Reductive aromatization of this oxanorbornene-fused nanobox leads to observation of a new zigzag carbon nanobelt by high resolution mass spectroscopy. The fluorescence titration and NMR experiments indicate that this nanobox encapsulates C₇₀ in solution with a binding constant of (3.2 ± 0.1) × 10⁶ M⁻¹ in toluene and a high selectivity against C₆₀ and its derivatives. As found from the X-ray crystallographic analysis, this nanobox changes the shape of its cross-section from a rhombus to nearly a square upon accommodating C₆₀.

A new oxanorbornene-fused nanobox encapsulated C₇₀ selectively in solution with a binding constant of (3.2 ± 0.1) × 10⁶ M⁻¹. Reductive aromatization of this nanobox led to observation of a new zigzag carbon nanobelt by mass spectroscopy.

Practical Synthesis of 3-Aryl Anthranils via an Electrophilic Aromatic Substitution Strategy

We report a practical route for the synthesis of valuable 3-aryl anthranils from readily available anthranils and simple arenes by using the classical electrophilic aromatic substitution (EAS) strategy. This transformation goes through an electrophilic substitution and rearomatisation sequence by employing Tf₂O as an effective activator. A wide range of arenes were compatible in this transformation, delivering various structurally diversified 3-aryl anthranils in good yields and high regioselectivity. In addition, a variety of readily available feedstocks such as olefins, alkenyl triflates, silyl enolethers, carbonyl compounds, thiophenols and thiols could also participate in the reaction to achieve the C3 alkenylation, alkylation and thioetherification of anthranils. Of note, the synthesized 3-aryl anthranils proved to be a highly robust platform to access a series of biologically active compounds, drug derivatives and organic optoelectronic materials.

A practical route for the synthesis of valuable 3-aryl anthranils from readily available anthranils and simple arenes has been achieved through an electrophilic substitution and rearomatization sequence by employing Tf₂O as an effective activator.

Systematic Study of Aromatic-Ring-Targeted Cycloadditions of 5-Hydroxymethylfurfural Platform Chemicals

The reaction space of the furanics-to-aromatics (F2A) conversion process for 5-hydroxymethylfurfural (HMF)-based platform chemicals has been explored both experimentally and by quantum chemistry methods. For the first time, a structure-activity relationship was established in furan-yne cycloaddition for a number of different HMF derivatives. Correlations between the activation energy of the cycloaddition stage and the structure of the substrates were established by molecular modeling methods. Analysis of the concerted and stepwise mechanisms of cycloaddition in the singlet and triplet electronic states of the molecular system was carried out. A series of biobased 7-oxanorbornadienes was obtained in the reaction with dimethyl acetylenedicarboxylate. Various methods of aromatization of the obtained [4+2] adducts have been examined. Rearrangement catalyzed by a Lewis acid leads to the formation of a phenol derivative, whereas reduction by diiron nonacarbonyl leads to the formation of functionalized benzene. Systematic study of the cycloaddition process has revealed a simple way to analyze and predict the relative reactivity of furanic substrates.

Recent Advances on Diels-Alder-Driven Preparation of Bio-Based Aromatics

The preparation of high value-added chemicals from renewable resources is a crucial approach towards a sustainable economy. One prominent alternative to the production of petroleum-based chemicals from fossil resources is through the sequential Diels-Alder/aromatization reactions of biomass-derived furan platforms. This Concept is focused on the recent boom in bio-based furan DA strategies for aromatization of bio-based platform chemicals, particularly that of furfurals, ranging from indirect use and activation strategies to recent examples of direct DA reaction of these electron-withdrawing biomass-derived furans.

Helicene synthesis by Brønsted acid-catalyzed cycloaromatization in HFIP [(CF3)2CHOH]

A facile synthesis of carbo- and heterohelicenes was achieved via tandem cycloaromatization of bisacetal precursors, which were readily prepared through C–C bond formation by Suzuki–Miyaura coupling. This cyclization was efficiently realized by a catalytic amount of trifluoromethanesulfonic acid (TfOH) in a cation-stabilizing solvent, 1,1,1,3,3,3-hexafluoropropan-2-ol (HFIP), which readily allowed gram-scale syntheses of higher-order helicenes, double helical helicenes, and heterohelicenes.

Mechanistic Insights into Rhenium-Catalyzed Regioselective C-Alkenylation of Phenols with Internal Alkynes

A (μ-aryloxo)rhenium complex was isolated and confirmed as a key precatalyst for rhenium-catalyzed ortho-alkenylation (C-alkenylation) of unprotected phenols with alkynes. The reaction exclusively provided ortho-alkenylphenols; the formation of para or multiply alkenylated phenols and hydrophenoxylation (O-alkenylation) products was not observed. Several mechanistic experiments excluded a classical Friedel-Crafts-type mechanism, leading to the proposed phenolic hydroxyl group assisted electrophilic alkenylation as the most plausible reaction mechanism. For this purpose, the use of rhenium, a metal between the early and late transition metals in the periodic table, was key for the activation of both the soft carbon-carbon triple bond of the alkyne and the hard oxygen atom of the phenol, at the same time. ortho-Selective alkenylation with allenes also provided the corresponding adducts with a substitution pattern different from that obtained by the addition reaction with alkynes.

Rhenium-Catalyzed Regioselective ortho-Alkenylation and [3 + 2 + 1] Cycloaddition of Phenols with Internal Alkynes

An operationally simple and direct rhenium-catalyzed ortho-alkenylation ( C-alkenylation) of unprotected phenols with alkynes was developed. The protocol provided ortho-alkenylphenols exclusively, and formation of para- or multiply alkenylated phenols and hydrophenoxylation ( O-alkenylation) products were not observed. The [3 + 2 + 1] cycloaddition of phenols and two alkynes via ortho-alkenylation was also demonstrated, in which the alkynes functioned as both two- and one-carbon units. These reactions proceeded with readily available starting materials under neutral conditions without additional ligands.

Direct methylation and carbonylation of in situ generated arynes via HDDA-Wittig coupling

A high-efficiency HDDA-Wittig coupling strategy for synthesis of fully functionalized benzenes is reported. Direct methylation and carbonylation of aryne intermediates reacted with phosphorus ylides to form the carbonylated 2,3-dihydro-1H-indenes.