Switchable, chiral aluminium catalysts for ring opening polymerisations

A switchable, solvent-free catalytic system was developed in which Al methyl aminebis(phenolate) catalysts selectively initiate the formation of a polyether from cyclohexene oxide under CO2 atmosphere or the ring opening copolymerisation (ROCoP) of cyclohexene oxide and CO2 through the addition of a PPNCl (bis(triphenylphosphine)iminium chloride) cocatalyst to form poly(cyclohexene carbonate).

Access to Stereoblock Polyesters via Irreversible Chain-Transfer Ring-Opening Polymerization (ICT-ROP)

Precise control over polymer microstructure can enable the molecular tunability of material properties and represents a significant challenge in polymer chemistry. Stereoblock copolymers are some of the simplest stereosequenced polymers, yet the synthesis of stereoblock polyesters from prochiral or racemic monomers outside of "simple" isotactic stereoblocks remains limited. Herein, we report the development of irreversible chain-transfer ring-opening polymerization (ICT-ROP), which overcomes the fundamental limitations of single catalyst approaches by using transmetalation (e.g., alkoxide-chloride exchange) between two catalysts with distinct stereoselectivities as a means to embed temporally controlled multicatalysis in ROP. Our combined small-molecule model and catalytic polymerization studies lay out a clear molecular basis for ICT-ROP and are exploited to access the first examples of atactic-syndiotactic stereoblock (at-sb-st) polyesters, at-sb-st polyhydroxyalkanoates (PHAs). We achieve high levels of control over molecular weight, tacticity, monomer composition, and block structures in a temporally controlled manner and demonstrate that stereosequence control leads to polymer tensile properties that are independent of thermal properties.

Recent Advances in Sequence-Controlled Ring-Opening Copolymerizations of Monomer Mixtures

Transforming renewable resources into functional and degradable polymers is driven by the ever-increasing demand to replace unsustainable polyolefins. However, the utility of many degradable homopolymers remains limited due to their inferior properties compared to commodity polyolefins. Therefore, the synthesis of sequence-defined copolymers from one-pot monomer mixtures is not only conceptually appealing in chemistry, but also economically attractive by maximizing materials usage and improving polymers' performances. Among many polymerization strategies, ring-opening (co)polymerization of cyclic monomers enables efficient access to degradable polymers with high control on molecular weights and molecular weight distributions. Herein, we highlight recent advances in achieving one-pot, sequence-controlled polymerizations of cyclic monomer mixtures using a single catalytic system that combines multiple catalytic cycles. The scopes of cyclic monomers, catalysts, and polymerization mechanisms are presented for this type of sequence-controlled ring-opening copolymerization.

Reaching High Stereoselectivity and Activity in Organocatalyzed Ring-Opening Polymerization of Racemic Lactide by the Combined Use of a Chiral (Thio)Urea and a N-Heterocyclic Carbene

Stereochemical control during polymerization is a key strategy of polymer chemistry to achieve semicrystalline engineered plastics. The stereoselective ring-opening polymerization (ROP) of racemic lactide (rac-LA), which can lead to highly isotactic polylactide (PLA), is one of the emblematic examples in this area. Surprisingly, stereoselective ROP of rac-LA employing chiral organocatalysts has been under-leveraged. Here we show that a commercially available chiral thiourea (TU1), or its urea homologue (U1), can be used in conjunction with an appropriately selected N-heterocyclic carbene (NHC) to trigger the stereoselective ROP of rac-LA at room temperature in toluene. Both a high organic catalysis activity (>90% monomer conversion in 5-9 h) and a high stereoselectivity (probability of formation of meso dyads, P_m, in the range 0.82-0.93) can be achieved by thus pairing a NHC and a chiral amino(thio)urea. The less sterically hindered and the more basic NHC, that is, a NHC bearing tert-butyl substituents (NHC_tBu), provides the highest stereoselectivity when employed in conjunction with the chiral TU1 or U1. This asymmetric organic catalysis strategy, as applied here in polymerization chemistry, further expands the field of possibilities to achieve bioplastics with adapted thermomechanical properties.

Heterocycle/Heteroallene Ring-Opening Copolymerization: Selective Catalysis Delivering Alternating Copolymers

Heteroatom-containing polymers have strong potential as sustainable replacements for petrochemicals, show controllable monomer-polymer equilibria and properties spanning plastics, elastomers, fibres, resins, foams, coatings, adhesives, and self-assembled nanostructures. Their current and future applications span packaging, house-hold goods, clothing, automotive components, electronics, optical materials, sensors, and medical products. An interesting route to these polymers is the catalysed ring-opening copolymerisation (ROCOP) of heterocycles and heteroallenes. It is a living polymerization, occurs with high atom economy, and creates precise, new polymer structures inaccessible by traditional methods. In the last decade there has been a renaissance in research and increasing examples of commercial products made using ROCOP. It is better known in the production of polycarbonates and polyesters, but is also a powerful route to make N-, S-, and other heteroatom-containing polymers, including polyamides, polycarbamates, and polythioesters. This Review presents an overview of the different catalysts, monomer combinations, and polymer classes that can be accessed by heterocycle/heteroallene ROCOP.

DMC-Mediated Copolymerization of CO2 and PO—Mechanistic Aspects Derived from Feed and Polymer Composition

The influence of composition of liquid phase on composition of poly(propylene ether carbonates) in the copolymerization of CO2 with propylene oxide (PO), mediated by a zinc chloride cobalt double metal cyanide, was monitored by FT-IR/CO2 uptake/size exclusion chromatography in batch and semi-batch mode. The ratio of mol fractions of carbonate to ether linkages F (~0.15) was found virtually independent on the feed between 60 and 120 °C. The presence of CO2 lowers the catalytic activity but yields more narrowly distributed poly(propylene ether carbonates). Hints on diffusion and chemistry-related restrictions were found underlying, broadening the distribution. The incorporation of CO2 seems to proceed in a metal-based insertion chain process, ether linkages are generated stepwise after external nucleophilic attack. The presence of amines resulted in lower activities and no change in F. An exchange of chloride for nitrate in the catalyst led to a higher F of max. 0.45. The observations are interpreted in a mechanistic scheme, comprising surface-base-assisted nucleophilic attack of external weak nucleophiles and of mobile surface-bound carboxylato entities on activated PO in competition to protonation of surface-bound alkoxide intermediates by poly(propylene ether carbonate) glycols or by surface-bound protons. Basic entities on the catalyst may promote CO2 incorporation.

Dinucleating Amino-Phenolate Platform for Zinc Catalysts: Impact on Lactide Polymerization

We report imine- and amine-based dinucleating ligands bearing a bisphenol backbone and explore their coordination chemistry with zinc to form zinc alkyl, alkoxide, acetate, and amide complexes. Full characterization of the complexes shows that this ligand framework can support dinuclear and trinuclear complexes. We explore the reactivity of the zinc alkyl and alkoxide complexes as catalysts for the ring opening polymerization of lactide and compared this reactivity to analogous mononuclear complexes. We show that 1) The amine-based complexes are more reactive than the imine-based analogues; 2) The trinuclear zinc alkyl species show unusual control and reproducibility for lactide polymerization; and 3) The extent of bimetallic cooperation is hampered by the ability of the ligand framework to form trinuclear clusters.

Ring-opening copolymerization of cyclic epoxide and anhydride using a five-coordinate chromium complex with a sterically demanding amino triphenolate ligand

This work describes polyester synthesis via alternating ring-opening copolymerization of epoxides and anhydrides using a trigonal bipyramidal chromium complex containing a sterically demanding ligand.

Chemoselective Polymerization of Epoxides from Carboxylic Acids: Direct Access to Esterified Polyethers and Biodegradable Polyurethanes

Carboxylic-acid-initiated ring-opening polymerization (ROP) of epoxides is a fast approach to esterified polyethers which are cleavable at the termini or centers. A major challenge lies in conventional ROP methods because of the lability of ester groups formed in the initiation step. Here, we describe chemoselective ROP of epoxides from aliphatic, aromatic, and methacrylic carboxylic acids using two-component metal-free catalysts. Transesterification is clearly absent so that well-defined α-(carboxylic ester)-ω-hydroxy polyethers are generated in one step from monocarboxylic acids. The livingness of the ROP is verified despite the slow initiation mode. The ester end group can be readily cleaved from the polyether hydrolytically. An α,ω-dihydroxy poly(propylene oxide) with two central ester groups is generated from a diacid initiator and transformed in situ by the same catalyst to polyurethane which shows distinct enzymatic degradability. This study provides convenient access to α,ω-heterobifunctional polyethers with cleavable, releasable, or modifiable end groups and to biodegradable polyether-based materials.