Microwaves induced epitaxial growth of urchin like MIL-53(Al) crystals on ceramic supports

Shaping Metal-Organic Frameworks (MOFs) poses a significant challenge for their widespread application on a large scale. In particular, a precise control over crystal orientation and arrangement on substrates are expected to provide exiting opportunities for novel materials with customized characteristics and enhanced performance in catalysis, gas storage, sensing, optics and electronics. Here we demonstrated for the first time that microwave irradiation can induce well controlled epitaxial growth of urchin-like MIL-53(Al) crystals via the hydrothermal conversion of Atomic Layer Deposition alumina layers on SiC foams. The resulting large, ordered crystals feature specific size, homogeneity, dispersion, and quantity that strongly correlate with the nature of the ceramic support and its ability to absorb microwaves. Furthermore, the supported MIL-53(Al) urchins were considered as templates for generating nanostructured alumina fibers on SiC foams, providing attractive catalyst carriers with high specific surface areas.

Influence of Pressure and Temperature on the Flexible Behavior of Iron-Based MIL-53 with the CO2 Host: A Comprehensive Experimental and DFT Study

This research focuses on developing MIL-53-type compounds with Fe obtained with ligands derived from PET waste, followed by the controlled addition of hydrofluoric acid (HF). Incorporating HF into the MOF structure induced substantial changes in the material textural properties, resulting in a significant change in CO2 adsorption. Furthermore, a distinctive structural alteration (breathing effect) was observed in the CO2 isotherms at different temperatures; these structural changes have not been observed by X-ray diffraction (XRD) because this characterization has been performed at room temperature, whereas the adsorption experiments were conducted at 260, 273, and 303 K and different pressures. Subsequently, DFT studies were performed to investigate the CO2-filling mechanisms and elucidate the material respiration effect. This approach offers promising opportunities for sustainable materials with improved gas adsorption properties.

Investigation of ortho-positronium annihilation for porous materials with different geometries and topologies

In this work, we present the results of the ortho-positronium (o-Ps) annihilation lifetimes and nitrogen adsorption measurements for different porous materials and an approach for describing the annihilation of o-Ps in a pore, which results in a surface-volume formula (SVF) for calculating the pore-related o-Ps lifetime. This proposed formula gives the relationship between the o-Ps annihilation rate and the effective pore radius, bulk composition, and pore structure, including pore geometry and topology. The pore-related o-Ps lifetimes of different materials calculated by the SVF are consistent with experimental results for both micro- and mesopores (and macropores) with different geometries and topologies. The SVF is convenient for calculations of pore dimensions for many cases of metal organic frameworks and zeolites. This approach enables us to fully explain the temperature dependence of the o-Ps annihilation lifetime over a wide temperature range, 20-700 K.

Fluorescence turn-off sensing strategy based on Al-based MOF for selective detection of tricresyl phosphate

Tricresyl phosphate (TCP), a notable emerging pollutant with a high bioconcentration factor and biotoxicity, is a typical representative of aryl-organophosphorus flame retardants. The electrochemical and chromatographic technologies used in conventional TCP detection have a variety of drawbacks. Hence, it is crucial to suggest an easy, accurate, and selective method for detecting TCP. In this study, we presented a brand-new method based on NH₂-MIL-53(Al) nanoprobe for the direct luminescence assay of TCP. NH₂-MIL-53(Al) possessed an excellent crystal structure and superior optical qualities. Notably, the introduction of TCP caused a considerable dampening of the photoluminescence signal of the nanoprobe. The fluorescence response based on static quenching was verified by fluorescence lifetime decay curves. The thermodynamic analysis further concluded that TCP and nanoprobe spontaneously produced non-fluorescent complexes due to hydrophobic interaction. The quenching efficiency (F₀-F)/F₀ of the nanoprobe and the TCP concentration displayed good linearity in the scope of 0.3-3.0 μM (R² = 0.996), and the LOD was 0.058 μM under the ideal detection conditions. More significantly, the technique was effectively used to identify TCP in lake and tap water (RSD ≤5.79%), which provided a fresh perspective on how to recognize OPFRs in environmental water.

A dual purpose aluminum-based metal organic framework for the removal of chloramphenicol from wastewater

The presence of antibiotics in the aquatic environment can cause significant environmental and human health problems even at trace concentrations. Conventional treatment systems alone are ineffective in removing these resistant antibiotics. To address this problem, oxidation and adsorption techniques were used to explore the removal of recalcitrant antibiotic chloramphenicol (CAP). An aluminum-based metal-organic framework (Al-MIL) with high surface area and extended porosity, was prepared and used both as adsorbent and catalyst for the oxidation of CAP. Characterization of the Al-MIL revealed a large surface area of 1137 m² g^-1, a homogeneous microporous structure, good crystallinity, and particle size in the range of 200-400 nm. Adsorption of CAP on Al-MIL achieved equilibrium after 1 h, reaching a maximum adsorption capacity of 96.1 mg g^-1 at the optimum pH value of 5.3. The combination of adsorption and oxidation did not improve the % TOC reduction considerably, indicating an antagonistic rather than synergistic effect between the two processes. Oxidation alone in the presence of persulfate, achieved a % TOC reduction of 71% after 2 h, compared to 56% achieved by adsorption alone at the same duration. The optimum persulfate concentration was determined as 2.5 mM. The Al-MIL structure did not demonstrate any substantial deterioriation after six repeated runs, according to the reusability experiments.

MIL-53 and its OH-bonded variants for bio-polyol adsorption from aqueous solution

The adsorption of bio-polyols from dilute aqueous solution is important but faces challenges in the sustainable bio-refinery process. One solution to increase adsorption efficiency is to leverage host–guest interactions between the polyols and materials to grant a preference for polyols. In this study, we synthesized MIL-53 and diverse OH-bonded variants, and studied their adsorption properties towards ethanediol, 1,3-propanediol and glycerol in water. Among the four materials, OH–MIL-53 exhibited fast adsorption kinetics and high capacity, and could be completely regenerated through ethanol elution. Hydrophobic interactions between the alkyl chains of the polyols and the organic linkers of OH–MIL-53 and hydrogen bonding interactions between their OH groups were identified. The synergistic effect of the host–guest interactions is responsible for the unique adsorption performances of OH–MIL-53 towards polyols, and particularly for 1,3-propanediol.

Delicate host–guest interaction drives OH-bonded MOF to capture bio-polyols from diluted aqueous solution, with high capacity, fast kinetics and recyclability.

Bimetallic Fe/Al-MOF for the adsorptive removal of multiple dyes: optimization and modeling of batch and hybrid adsorbent-river sand column study and its application in textile industry wastewater

Bimetallic metal organic framework (MOF) has garnered interest over the years with its applications in industrial wastewater treatment. In this work, Fe-Al-1,4-benzene-dicarboxylic acid (FeAl(BDC)) MOF was synthesized, and adsorptive removal of Rhodamine B dye in batch and unique hybrid FeAl (BDC)-river sand fixed-bed column was studied. The experimental data from the batch studies corroborated well with the pseudo-second-order (PSO) (R²: 0.97) and Freundlich adsorption isotherm models (R²: 0.98) and achieved a maximum adsorption capacity of 48.59 mg/g in 90 min. Furthermore, a fixed-bed column study was conducted to assess the effect of varying flow rate (2, 5, 8 mL/min), bed height (5, 9, 13 cm), and feed concentration (10, 20, 30 mg/L) on the adsorption performance of FeAl(BDC) in continuous mode of operation. A uniform mixture of river sand and FeAl(BDC) by weight ratio (9:1) was packed into the column. The sand-FeAl(BDC) fixed-bed column could achieve the maximum adsorption capacity (q_exp) of 113.05 mg/g at a 5 mL/min flow rate, feed concentration of 20 mg/L, and a bed height of 13 cm. The experimental data of the column study were successfully fitted well with BDST, Thomas (q_cal: 114.94 mg/g), Yoon-Nelson, and dose-response models (q_cal: 113.41 mg/g) and R²: 0.97-0.99. The fitting parameter values from the BDST model raise the scope of viable upscaling of the fixed-bed column. In all, it is proposed that these river sand-FeAl(BDC)-based filters can be widely used in areas facing critical contamination and in poor communities with a high demand for water.

A review on the adsorption mechanism of different organic contaminants by covalent organic framework (COF) from the aquatic environment

Recently, covalent organic frameworks (COFs) have gained significant attention as a promising material for the elimination of various organic pollutants due to their distinctive characteristics such as high surface area, adjustable porosity, high removal efficiency, and recyclability. The efficiency and selectivity of COFs depend on the decorated functional group and the pore size of the chemical structure. Hence, this review highlights the adsorption removal mechanism of different organic contaminants such as (pharmaceutical and personal care products, pesticides, dyes, and industrial by-products) by COFs from an aqueous solution. Spectroscopic techniques and theoretical calculation methods are introduced to understand the mechanism of the adsorption process. Also, a comparison between the performance of COFs and other adsorbents was discussed. Furthermore, future research directions and challenges encountered in the removal of organic contaminants by COFs are discussed.

Generation of Strong Basicity in Metal-Organic Frameworks: How Do Coordination Solvents Matter?

Solid strong bases with an ordered pore structure (OPS-SSBs) have attracted much attention because of their high catalytic activity and shape selectivity as heterogeneous catalysts in various reactions. Nevertheless, high temperatures are required to fabricate OPS-SSBs by using traditional methods. Herein, we report for the first time that the coordination solvents affect basicity generation in metal-organic frameworks (MOFs) greatly and that strong basicity can be formed at comparatively low temperatures. A typical MOF, MIL-53, was employed, and three different solvents, namely, water, methanol, and N,N-dimethylformamide (DMF), were coordinated, respectively, by means of solvent exchange. Thermogravimetry-mass spectrometer analysis shows that the conversion temperature of base precursor KNO₃ is quite different on MIL-53 coordinated with different solvents. The conversion of KNO₃ to basic sites takes place at 350, 300, and 250 °C on MIL-53 coordinated with water, methanol, and DMF, respectively. It is fascinating to observe the generation temperature of strongly basic sites at 250 °C, which is noticeably lower than that on various supports, such as mesoporous silica SBA-15 (600 °C), zeolite Y (700 °C), and metal oxide ZrO₂ (730 °C). This is due to the redox interaction between coordination solvents and KNO₃, leading to a significant decrease in the temperature for KNO₃ conversion. Consequently, OPS-SSBs were prepared successfully with an ordered pore structure and strong basicity. The obtained OPS-SSBs show good shape selectivity in Knoevenagel condensation of aromatic aldehydes with different active methylene compounds. Moreover, these solid bases are highly active in the synthesis of dimethyl carbonate through transesterification reaction. This work might open up a new avenue for the fabrication of various functional materials at low temperatures through redox interactions.

Metal-Organic Frameworks for Liquid Phase Applications

In the last two decades, metal-organic frameworks (MOFs) have attracted overwhelming attention. With readily tunable structures and functionalities, MOFs offer an unprecedentedly vast degree of design flexibility from enormous number of inorganic and organic building blocks or via postsynthetic modification to produce functional nanoporous materials. A large extent of experimental and computational studies of MOFs have been focused on gas phase applications, particularly the storage of low-carbon footprint energy carriers and the separation of CO2-containing gas mixtures. With progressive success in the synthesis of water- and solvent-resistant MOFs over the past several years, the increasingly active exploration of MOFs has been witnessed for widespread liquid phase applications such as liquid fuel purification, aromatics separation, water treatment, solvent recovery, chemical sensing, chiral separation, drug delivery, biomolecule encapsulation and separation. At this juncture, the recent experimental and computational studies are summarized herein for these multifaceted liquid phase applications to demonstrate the rapid advance in this burgeoning field. The challenges and opportunities moving from laboratory scale towards practical applications are discussed.

Fluoride sensing performance of fluorescent NH2-MIL-53(Al): 2D nanosheets vs. 3D bulk

Due to their ultra-thin morphology, larger specific surface area and more exposed active sites, two-dimensional (2D) metal-organic framework (MOF) nanosheets can break the limitations of three-dimensional (3D) MOFs in sensitivity, response speed and the limit of detection for sensing applications. In this work, fluorescent NH2-MIL-53(Al) nanosheets were developed as a fluoride detection sensor compared with the 3D bulk counterpart. The morphological and structural characteristics of the obtained products were systematically characterized, and the favourable chemical and fluorescence stability of the NH2-MIL-53(Al) nanosheets were explored. The fluorescent NH2-MIL-53(Al) nanosheets showed high sensitivity, fast response speed (as short as 10 seconds), low limit of detection (15.2 ppb), and wide linear detection range (5-250 μM), and all performances were better than those of their bulk counterpart. In addition, the sensing mechanism was investigated to be based on the transformation of the NH2-MIL-53(Al) framework that induced the release of fluorescent ligands, resulting in an exceptionally enhanced fluorescence. This work highlights the advantages of 2D MOF nanosheets in fluorescence sensing applications.