C-H amination chemistry mediated by trinuclear Cu(I) sites supported by a ligand scaffold featuring an arene platform and tetramethylguanidinyl residues

Tripodal ligands that can encapsulate single or multiple metal sites in C3-symmetric geometric configurations constitute valuable targets for novel catalysts. Of particular interest in ligand development are efforts toward incorporating apical elements that exhibit little if any electron donicity, to enhance the electrophilic nature of a trans positioned active oxidant (e.g., metal-oxo, -nitrene). The tripodal ligand TMG3trphen-Arene has been synthesized, featuring an arene platform 1,3,5-substituted with phenylene arms possessing tetramethylguanidinyl (TMG) residues. Compound [(TMG3trphen-Arene)Cu3(μ-Cl)3] has been subsequently synthesized by extracting a Cu3(μ-Cl)3 cluster from anhydrous CuCl and shown to encapsulate a crown-shaped Cu3(μ-Cl)3 fragment, supported by Cu-NTMG bonds and modest Cu3⋯arene long-range contacts. Energy decomposition analysis (EDA) indicates that electrostatic contributions to the total interaction energy far exceed those due to orbital interactions. The latter involve orbital pairings largely associated with the NTMG stabilization of the Cu3(μ-Cl)3 cluster. The independent gradient model based on the Hirshfeld partition (IGMH) corroborates that contacts between the arene platform and the Cu3 triangle are noncovalent in nature. Catalyst [(TMG3trphen-Arene)Cu3(μ-Cl)3] enables amination of sec-benzylic and tert-C-H bonds of a panel of substrates by pre-synthesized PhINTces in solvent matrices that incorporate small amounts of HFIP. The involvement of an electrophilic aminating agent is evidenced by the better yields obtained for electron-rich benzylic sites and is further supported by Hammett analysis that reveals the development of a small positive charge during C-H bond activation. A rather modest KIE effect (2.1) is obtained from intramolecular H(D) competition in the amination of ethylbenzene, at the borderline of reported values for concerted and stepwise C-H amination systems. DFT analysis of the putative copper-nitrene oxidant indicates that the nitrene N atom is bridging between two copper sites in closely spaced triplet (ground state) and broken-symmetry singlet electronic configurations.

Heavier tetrylene- and tetrylyne-transition metal chemistry: it's no carbon copy

Since the late 19th century, heavier tetrylene- and tetrylyne-transition metal chemistry has formed an important cornerstone in both main-group and organometallic chemistry alike. Driven by the success of carbene systems, significant efforts have gone towards the thorough understanding of the heavier group 14 derivatives, with examples now known from across the d-block. This now leads towards applications in cooperative bond activation, and moves ultimately towards well-defined catalytic systems. This review aims to summarise this vast field, from initial discoveries of tetrylene and tetrylyne complexes, to the most recent developments in reactivity and catalysis, as a platform to the future of this exciting, blossoming field.

A hybrid silylene-Pd catalyst: efficient C-N cross-coupling of sterically bulky amines and chiral amines

Herein, we report a catalytic system with N-heterocyclic silylene (NHSi)-phosphine-based hybrid bidentate ligands [PhC(NtBu)2SiN(PR2)(2,6-iPr2-C6H3)] and Pd(dba)2, which serves as an effective catalyst for C-N cross-coupling of a wide range of sterically bulky amines and optically active amines, which is challenging otherwise.

Recent progress in transition metal complexes featuring silylene as ligands

Silylenes, divalent silicon(II) compounds, once considered highly reactive and transient species, are now widely employed as stable synthons in main-group and coordination chemistry for myriad applications. The synthesis of stable silylenes represents a major breakthrough, which led to extensive exploration of silylenes in stabilizing low-valent main-group elements and as versatile ligands in coordination chemistry and catalysis. In recent years, the exploration of transition metal complexes stabilized with silylene ligands has captivated significant research attention. This is due to their robust σ-donor characteristics and capacity to stabilize transition metals in low valent states. It has also been demonstrated that the transition metal complexes of silylenes are effective catalysts for hydroboration, hydrosilylation, hydrogenation, hydrogen isotope exchange reactions, and small molecule activation chemistry. This review article focuses on the recent progress in the synthesis and catalytic application of transition metal complexes of silylenes.

Silylene-Copper-Amide Emitters: From Thermally Activated Delayed Fluorescence to Dual Emission

Herein, we report the inaugural instance of N-heterocyclic silylene (NHSi)-coordinated copper amide emitters (2-5). These complexes exhibit thermally activated delayed fluorescence (TADF) and singlet-triplet dual emission in anaerobic conditions. The NHSi-Cu-diphenylamide (2) complex demonstrates TADF with a very small ΔEST gap (0.01 eV), an absolute quantum yield of 11 %, a radiative rate of 2.55×105 s-1, and a short τTADF of 0.45 μs in the solid state. The dual emissive complexes (3-5) achieve an absolute quantum yield of up to 20 % in the solid state with a kISC rate of 1.82×108 s-1 and exhibit room temperature phosphorescence (RTP) with lifetimes up to 9 ms. The gradual decrease in the intensity of the triplet state of complex 3 under controlled oxygen exposure demonstrates its potential for future oxygen-sensing applications. Complexes 2 and 3 have been further utilized to fabricate converted LEDs, paving the way for future OLED production using newly synthesized NHSi-Cu-amides.

Polydentate Amidinato-Silylenes, -Germylenes and -Stannylenes

This review article focuses on amidinatotetrylenes that potentially can (or have already shown to) behave as bi- or tridentate ligands because they contain at least one amidinatotetrylene moiety (silylene, germylene or stannylene) and one (or more) additional coordinable fragment(s). Currently, they are being widely used as ligands in coordination chemistry, small molecule activation and catalysis. This review classifies those that have been isolated as transition metal-free compounds into five families that differ in the position(s) of the donor group(s) (D) on the amidinatotetrylene moiety, namely: ED{R1NC(R2)NR1}, EX{DNC(R2)NR1}, EX{R1NC(D)NR1}, EX{DNC(R2)ND} and E{R1NC(R2)ND}2 (E=Si, Ge or Sn). Those that do not exist as transition metal-free compounds but have been observed as ligands in transition metal complexes are cyclometallated and ring-opened amidinatotetrylene ligands. This article presents schematic descriptions of their structures, the approaches used for their syntheses and a quick overview of their involvement (as ligands) in transition metal-catalysed reactions. The literature is covered up to the end of 2023.

Amidinatotetrylenes Donor Functionalized on Both N Atoms: Structures and Coordination Chemistry

E(hmds)(bqfam) (E = Ge (1a), Sn (1b); hmds = N(SiMe3)2, bqfam = N,N'-bis(quinol-8-yl)formamidinate), which are amidinatotetrylenes equipped with quinol-8-yl fragments on the amidinate N atoms, have been synthesized from the formamidine Hbqfam and Ge(hmds)2 or SnCl(hmds). Both 1a and 1b are fluxional in solution at room temperature, as the E atom oscillates from being attached to the two amidinate N atoms to being chelated by an amidinate N atom and its closest quinolyl N atom (both situations are similarly stable according to density functional theory calculations). The hmds group of 1a and 1b is still reactive and the deprotonation of another equivalent of Hbqfam can be achieved, allowing the formation of the homoleptic derivatives E(bqfam)2 (E = Ge, Sn). The reactions of 1a and 1b with [AuCl(tht)] (tht = tetrahydrothiophene), [PdCl2(MeCN)2], [PtCl2(cod)] (cod = cycloocta-1,5-diene), [Ru3(CO)12] and [Co2(CO)8] have been investigated. The gold(I) complexes [AuCl{κE-E(hmds)(bqfam)}] (E = Ge, Sn) have a monodentate κE-tetrylene ligand and display fluxional behavior in solution the same as that of 1a and 1b. However, the palladium(II) and platinum(II) complexes [MCl{κ3E,N,N'-ECl(hmds)(bqfam)}] (M = Pd, Pt; E = Ge, Sn) contain a κ3E,N,N'-chloridotetryl ligand that arises from the insertion of the tetrylene E atom into an M-Cl bond and the coordination of an amidinate N atom and its closest quinolyl N atom to the metal center. Finally, the binuclear ruthenium(0) and cobalt(0) complexes [Ru2{μE-κ3E,N,N'-E(hmds)(bqfam)}(CO)6] and [Co2{μE-κ3E,N,N'-E(hmds)(bqfam)}(μ-CO)(CO)4] (E = Ge, Sn) have a related κ3E,N,N'-tetrylene ligand that bridges two metal atoms through the E atom. For the κ3E,N,N'-metal complexes, the quinolyl fragment not attached to the metal is pendant in all the germanium compounds but, for the tin derivatives, is attached to (in the Pd and Pt complexes) or may interact with (in the Ru2 and Co2 complexes) the tin atom.

The borderless world of chemical bonding across the van der Waals crust and the valence region

The definition of the van der Waals crust as the spherical section between the atomic radius and the van der Waals radius of an element is discussed and a survey of the application of the penetration index between two interacting atoms in a wide variety of covalent, polar, coordinative or noncovalent bonding situations is presented. It is shown that this newly defined parameter permits the comparison of bonding between pairs of atoms in structural and computational studies independently of the atom sizes.

Stimuli Responsive Silylene: Electromerism Induced Reversible Switching Between Mono- and Bis-Silylene

Electromerism is a very well-known phenomenon in transition metal chemistry. In main group chemistry, this concept has only started getting attention recently. We report stimuli responsive low-valent silicon compounds exhibiting electromerism. A mixed-valent silaiminyl-silylene 1, [LSi-Si(NDipp)L] (L=PhC(Nt Bu)2 ), was synthesized in a single step from amidinate-chlorosilylene. Compound 1 has two interconnected Si atoms in formally +I and +III oxidation states. Upon treatment with Lewis acidic CuI X (X=mesityl, Cl, Br, I), electron redistribution occurs resulting in the formation of [{LSi(NDipp)Si(L)}-CuX], in which both silicon atoms are in the +II formal oxidation state. Removal of the copper center from [{LSi(NDipp)Si(L)}-CuX] by using a Lewis basic carbene led to reformation of the precursor [LSi-Si(NDipp)L]. Thus, the process is fully reversible. This showcases the first example of Lewis acid/base-induced reversible electromerism in silicon chemistry.

Azide-Alkyne "Click" Reaction in Water Using Parts-Per-Million Amine-Functionalized Azoaromatic Cu(I) Complex as Catalyst: Effect of the Amine Side Arm

A series of Cu(II) complexes, 1-4 and 6, were synthesized through a reaction of amine-functionalized pincer-like ligands, HL^1,2, L^a,b, and a bidentate ligand L¹ with CuCl₂·2H₂O. The chemical reduction of complex 1 using 1 equiv of sodium l-ascorbate resulted in a dimeric Cu(I) complex 5 in excellent yield. All of the complexes, 1-6, were thoroughly characterized using various physicochemical characterization techniques, single-crystal X-ray structure determination, and density functional theory calculations. Ligands HL^1,2 and L^a,b behaved as tridentated donors by the coordination of the amine side arm in their respective Cu(II) complexes, and the amine side arm remained as a pendant in Cu(I) complexes. All of these complexes (1-6) were explored for copper(I)-catalyzed 1,3-dipolar azide-alkyne cycloaddition (CuAAC) reaction at room temperature in water under air. Complex 5 directly served as an active catalyst; however, complexes 1-4 and 6 required 1 equiv of sodium l-ascorbate to generate their corresponding active Cu(I) catalyst. It has been observed that azo-based ligand-containing Cu(I)-complexes are air-stable and were highly efficient for the CuAAC reaction. The amine side arm in the ligand backbone has a dramatic role in accelerating the reaction rate. Mechanistic investigations showed that the alkyne C-H deprotonation was the rate-limiting step and the pendant amine side arm intramolecularly served as a base for Cu-coordinated alkyne deprotonation, leading to the azide-alkyne 2 + 3 cycloaddition reaction. Thus, variation of the amine side arm in complexes 1-4 and use of the most basic diisopropyl amine moiety in complex 4 has resulted in an unique amine-functionalized azoaromatic Cu(I) system for CuAAC reaction upon sodium l-ascorbate reduction. The complex 4 has shown excellent catalysis at its low parts-per-million level loading in water. The catalytic protocol was versatile and exhibited very good functional group tolerance. It was also employed efficiently to synthesize a number of useful functional triazoles having medicinal, catalytic, and targeting properties.

Coordination modulated on-off switching of flexibility in a metal-organic framework

Stimuli-responsive metal-organic frameworks (MOFs) exhibit dynamic, and typically reversible, structural changes upon exposure to external stimuli. This process often induces drastic changes in their adsorption properties. Herein, we present a stimuli-responsive MOF, 1·[CuCl], that shows temperature dependent switching from a rigid to flexible phase. This conversion is associated with a dramatic reversible change in the gas adsorption properties, from Type-I to S-shaped isotherms. The structural transition is facilitated by a novel mechanism that involves both a change in coordination number (3 to 2) and geometry (trigonal planar to linear) of the post-synthetically added Cu(i) ion. This process serves to 'unlock' the framework rigidity imposed by metal chelation of the bis-pyrazolyl groups and realises the intrinsic flexibility of the organic link.

Single-Crystal-to-Single-Crystal Transformations of Metal-Organic-Framework-Supported, Site-Isolated Trigonal-Planar Cu(I) Complexes with Labile Ligands

Transition-metal complexes bearing labile ligands can be difficult to isolate and study in solution because of unwanted dinucleation or ligand substitution reactions. Metal-organic frameworks (MOFs) provide a unique matrix that allows site isolation and stabilization of well-defined transition-metal complexes that may be of importance as moieties for gas adsorption or catalysis. Herein we report the development of an in situ anion metathesis strategy that facilitates the postsynthetic modification of Cu(I) complexes appended to a porous, crystalline MOF. By exchange of coordinated chloride for weakly coordinating anions in the presence of carbon monoxide (CO) or ethylene, a series of labile MOF-appended Cu(I) complexes featuring CO or ethylene ligands are prepared and structurally characterized using X-ray crystallography. These complexes have an uncommon trigonal planar geometry because of the absence of coordinating solvents. The porous host framework allows small and moderately sized molecules to access the isolated Cu(I) sites and displace the "place-holder" CO ligand, mirroring the ligand-exchange processes involved in Cu-centered catalysis.

Heterobimetallic Coinage Metal-Ruthenium Complexes Supported by Anionic N-Heterocyclic Carbenes

The lithium complexes [(WCA‐NHC)Li(toluene)] of anionic N‐heterocyclic carbenes with a weakly coordinating borate moiety (WCA‐NHC, WCA=B(C₆F₅)₃, NHC=IDipp=1,3‐bis(2,6‐diisopropylphenyl)imidazolin‐2‐ylidene) were used for the preparation of silver(I) or copper(I) WCA‐NHC complexes. While the reactions in THF with AgCl or CuCl afforded anionic mono‐ and dicarbene complexes with solvated lithium counterions [Li(THF)_n]⁺ (n=3, 4), the reactions in toluene proceeded with elimination of LiCl and formation of the neutral phosphine and arene complexes [(WCA‐NHC)M(PPh₃)] and [(WCA‐NHC)M(η²‐toluene)] (M=Ag, Cu). The latter were used for the preparation of chlorido‐ and iodido‐bridged heterobimetallic Ag/Ru and Cu/Ru complexes [(WCA‐NHC)M(μ‐X)₂Ru(PPh₃)(η⁶‐p‐cymene)] (M=Ag, Cu, X=Cl; M=Ag, X=I). Surprisingly, these complexes resisted the elimination of CuCl, AgCl, or AgI, precluding WCA‐NHC transmetalation.

N-Heterocyclic silylenes in coinage metal chemistry: an account of recent advances

This article intends to highlight and comprehensively summarize the recent developments in the field of silylene-coinage metal chemistry. Recent years have witnessed exponential growth in the utilization of N-heterocyclic silylenes as ligands in transition metal chemistry. Still, silylene-coinage metal complexes have only started to appear very recently. Particular attention is focused on the synthetic approaches to silylene-coinage metal complexes and their unusual properties derived from the spectroscopic and crystallographic data. Recent studies have demonstrated that silylene-coinage metal complexes exhibit catalytic efficiency towards hydrosilylation, copper-catalyzed alkyne azide cycloaddition (CuAAC), and glycosidation reactions. Although the chemistry of silylene-coinage metal complexes has only begun to blossom, these findings justify the need for a review at this stage of development. This article will summarize the previous work on silylene-coinage metal complexes followed by recent advances and conclude with future possibilities.

Tris(pentafluoroethyl)difluorophosphorane: A Versatile Fluoride Acceptor for Transition Metal Chemistry

Fluoride abstraction from different types of transition metal fluoride complexes [Ln MF] (M=Ti, Ni, Cu) by the Lewis acid tris(pentafluoroethyl)difluorophosphorane (C2 F5 )3 PF2 to yield cationic transition metal complexes with the tris(pentafluoroethyl)trifluorophosphate counterion (FAP anion, [(C2 F5 )3 PF3 ]- ) is reported. (C2 F5 )3 PF2 reacted with trans-[Ni(iPr2 Im)2 (ArF )F] (iPr2 Im=1,3-diisopropylimidazolin-2-ylidene; ArF =C6 F5 , 1 a; 4-CF3 -C6 F4 , 1 b; 4-C6 F5 -C6 F4 , 1 c) through fluoride transfer to form the complex salts trans-[Ni(iPr2 Im)2 (solv)(ArF )]FAP (2 a-c[solv]; solv=Et2 O, CH2 Cl2 , THF) depending on the reaction medium. In the presence of stronger Lewis bases such as carbenes or PPh3 , solvent coordination was suppressed and the complexes trans-[Ni(iPr2 Im)2 (PPh3 )(C6 F5 )]FAP (trans-2 a[PPh3 ]) and cis-[Ni(iPr2 Im)2 (Dipp2 Im)(C6 F5 )]FAP (cis-2 a[Dipp2 Im]) (Dipp2 Im=1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene) were isolated. Fluoride abstraction from [(Dipp2 Im)CuF] (3) in CH2 Cl2 or 1,2-difluorobenzene led to the isolation of [{(Dipp2 Im)Cu}2 ]2+ 2 FAP- (4). Subsequent reaction of 4 with PPh3 and different carbenes resulted in the complexes [(Dipp2 Im)Cu(LB)]FAP (5 a-e, LB=Lewis base). In the presence of C6 Me6 , fluoride transfer afforded [(Dipp2 Im)Cu(C6 Me6 )]FAP (5 f), which serves as a source of [(Dipp2 Im)Cu)]+ . Fluoride abstraction of [Cp2 TiF2 ] (7) resulted in the formation of dinuclear [FCp2 Ti(μ-F)TiCp2 F]FAP (8) (Cp=η5 -C5 H5 ) with one terminal fluoride ligand at each titanium atom and an additional bridging fluoride ligand.

N-Heterocyclic silylene/germylene ligands in Au(i) catalysis

Cationic Au(i) complexes (2, 5 and 8) supported by N-heterocyclic carbene, silylene and germylene ligands were prepared and their potential as catalysts in glycosidation chemistry has been evaluated. Insights into the mechanism are provided using DFT studies. Practical application of them as catalysts was achieved by the synthesis of the branched pentamannan core of the HIV-gp120 envelope under mild conditions.