Orientation and stretching of supracolloidal chains of diblock copolymer micelles by spin-coating process

Supracolloidal chains consisting of nano- or micro-scale particles exhibit anisotropic properties not observed in individual particles. The orientation of the chains is necessary to manifest such characteristics on a macroscopic scale. In this study, we demonstrate the orientation of supracolloidal chains composed of nano-scale micelles of a diblock copolymer through spin-coating. We observed separate chains coated on a substrate with electron microscopy, and analyzed the orientation and stretching of the chains quantitatively with image analysis software. In drop-casting, the chains were coated randomly with no preferred orientation, and the degree of stretching exhibited an intrinsic semi-flexible nature. In contrast, spin-coated chains were aligned in the radial direction, and the apparent persistence length of the chain increased, confirming the stretching of the chain quantitatively. Furthermore, by incorporating fluorophores into supracolloidal chains and confirming the oriented chains with confocal fluorescence microscopy, it is demonstrated that oriented chains can be utilized as a template to align functional materials.

Guidelines derived from biomineralized tissues for design and construction of high-performance biomimetic materials: from weak to strong

Living organisms in nature have undergone continuous evolution over billions of years, resulting in the formation of high-performance fracture-resistant biomineralized tissues such as bones and teeth to fulfill mechanical and biological functions, despite the fact that most inorganic biominerals that constitute biomineralized tissues are weak and brittle. During the long-period evolution process, nature has evolved a number of highly effective and smart strategies to design chemical compositions and structures of biomineralized tissues to enable superior properties and to adapt to surrounding environments. Most biomineralized tissues have hierarchically ordered structures consisting of very small building blocks on the nanometer scale (nanoparticles, nanofibers or nanoflakes) to reduce the inherent weaknesses and brittleness of corresponding inorganic biominerals, to prevent crack initiation and propagation, and to allow high defect tolerance. The bioinspired principles derived from biomineralized tissues are indispensable for designing and constructing high-performance biomimetic materials. In recent years, a large number of high-performance biomimetic materials have been prepared based on these bioinspired principles with a large volume of literature covering this topic. Therefore, a timely and comprehensive review on this hot topic is highly important and contributes to the future development of this rapidly evolving research field. This review article aims to be comprehensive, authoritative, and critical with wide general interest to the science community, summarizing recent advances in revealing the formation processes, composition, and structures of biomineralized tissues, providing in-depth insights into guidelines derived from biomineralized tissues for the design and construction of high-performance biomimetic materials, and discussing recent progress, current research trends, key problems, future main research directions and challenges, and future perspectives in this exciting and rapidly evolving research field.

Fabrication of Oriented Polycrystalline MOF Superstructures

The field of metal-organic frameworks (MOFs) has progressed beyond the design and exploration of powdery and single-crystalline materials. A current challenge is the fabrication of organized superstructures that can harness the directional properties of the individual constituent MOF crystals. To date, the progress in the fabrication methods of polycrystalline MOF superstructures has led to close-packed structures with defined crystalline orientation. By controlling the crystalline orientation, the MOF pore channels of the constituent crystals can be aligned along specific directions: these systems possess anisotropic properties including enhanced diffusion along specific directions, preferential orientation of guest species, and protection of functional guests. In this perspective, we discuss the current status of MOF research in the fabrication of oriented polycrystalline superstructures focusing on the specific crystalline directions of orientation. Three methods are examined in detail: the assembly from colloidal MOF solutions, the use of external fields for the alignment of MOF particles, and the heteroepitaxial ceramic-to-MOF growth. This perspective aims at promoting the progress of this field of research and inspiring the development of new protocols for the preparation of MOF systems with oriented pore channels, to enable advanced MOF-based devices with anisotropic properties.

The flow of anisotropic nanoparticles in solution and in blood

The alignment of anisotropic nanoparticles in flow has been used for a range of applications such as the preparation of strong fibres and the assembly of in-plane aligned 1D-nanoobjects that are used for electronic devices, sensors, energy and biological application. Important is also the flow behaviour of nanoparticles that were designed for nanomedical applications such as drug delivery. It is widely observed that non-spherical nanoparticles have longer circulation times and a more favourable biodistribution. To be able to understand this behaviour, researchers have turned to analyzing the flow of non-spherical nanoparticles in the blood stream. In this review, an overview of microfluidic techniques that are used to monitor the alignment of anisotropic nanoparticles in solution will be provided, which includes analysis by small angle X-ray scattering (SAXS) and polarized light microscopy. The flow of these nanoparticles in blood is then discussed as the presence of red blood cells causes margination of some nanoparticles. Using fluorescence microscopy, the extent of margination can be identified, which coincides with the ability of nanoparticles to adhere to the cells grown along the wall. While these studies are mainly carried out in vitro using blood, initial investigations in vivo were able to confirm the unusual flow of anisotropic nanoparticles.

Assembled one-dimensional nanowires for flexible electronic devices via printing and coating: Techniques, applications, and perspectives

The rapid progress in flexible electronic devices has necessitated continual research into nanomaterials, structural design, and fabrication processes. One-dimensional nanowires, characterized by their distinct structures and exceptional properties, are considered essential components for various flexible electronic devices. Considerable attention has been directed toward the assembly of nanowires, which presents significant advantages. Printing and coating techniques can be used to assemble nanowires in a relatively simple, efficient, and cost-competitive manner and exhibit potential for scale-up production in the foreseeable future. This review aims to provide an overview of nanowire assembly using printing and coating techniques, such as bar coating, spray coating, dip coating, blade coating, 3D printing, and so forth. The application of assembled nanowires in flexible electronic devices is subsequently discussed. Finally, further discussion is presented on the potential and challenges of flexible electronic devices based on assembled nanowires via printing and coating.

Spray-Deposited Anisotropic Assemblies of Plasmonic Nanowires for Direction-Sensitive Strain Measurement

The development of nanoscale composites with hierarchical architecture and complex anisotropies enables the fabrication of new classes of devices. Stretchable strain sensors have been developed in the past for applications in various fields such as wearable electronics and soft robotics, yet the sensing capacities of most of these sensors are independent of the direction of deformation. In the present work, we report on the preparation of a direction-sensitive strain sensor using the anisotropic optical properties of a monolayer of oriented plasmonic 1D nano-objects. Grazing incidence spraying (GIS) is used for depositing a monolayer of in-plane aligned silver nanowires with a controlled density on a deformable and transparent substrate. Using the selective excitation of transverse and longitudinal localized plasmon resonance modes of silver nanowires by polarized UV-visible-NIR spectroscopy, we show that the macroscopic anisotropic properties of the monolayer upon stretching are highly dependent on the stretching direction and light polarization. Measuring the polarized optical properties of the anisotropic thin films upon stretching thus allow for retrieving both the local strain and the direction of the deformation using a simple model.

Self-assembly, alignment, and patterning of metal nanowires

Armed with the merits of one-dimensional nanostructures (flexibility, high aspect ratio, and anisotropy) and metals (high conductivity, plasmonic properties, and catalytic activity), metal nanowires (MNWs) have stood out as a new class of nanomaterials in the last two decades. They are envisaged to expedite significantly and even revolutionize a broad spectrum of applications related to display, sensing, energy, plasmonics, photonics, and catalysis. Compared with disordered MNWs, well-organized MNWs would not only enhance the intrinsic physical and chemical properties, but also create new functions and sophisticated architectures of optoelectronic devices. This paper presents a comprehensive review of assembly strategies of MNWs, including self-assembly for specific structures, alignment for anisotropic constructions, and patterning for precise configurations. The technical processes, underlying mechanisms, performance indicators, and representative applications of these strategies are described and discussed to inspire further innovation in assembly techniques and guide the fabrication of optoelectrical devices. Finally, a perspective on the critical challenges and future opportunities of MNW assembly is provided.

Nanopolymers for magnetic applications: how to choose the architecture?

Directional assembly of nanoscale objects results in morphologies that can broadly be classified as supra-molecular nanopolymers. Such morphologies, given a functional choice of the monomers used as building blocks, can be of ubiquitous utility in optical, magnetic, rheological, and medical applications. These applications, however, require a profound understanding of the interplay between monomer shape and bonding on one side, and polymeric properties - on the other. Recently, we fabricated nanopolymers using cuboid DNA nanochambers, as they not only allow fine-tuning of the resulting morphologies but can also carry magnetic nanoparticles. However, it is not known if the cuboid shape and inter-cuboid connectivity restrict the equilibrium confirmations of the resulting nanopolymers, making them less responsive to external stimuli. In this work, using Molecular Dynamics simulations, we perform an extensive comparison between various nanopolymer architectures to explore their polymeric properties, and their response to an applied magnetic field if magnetic nanoparticles are embedded. We explain the impact of monomer shape and bonding on the mechanical and magnetic properties and show that DNA nanochambers can build highly responsive and magnetically controllable nanopolymers.

Microfabrication of peptide self-assemblies: inspired by nature towards applications

Peptide self-assemblies show intriguing and tunable physicochemical properties, and thus have been attracting increasing interest over the last two decades. However, the micro/nano-scale dimensions of the self-assemblies severely restrict their extensive applications. Inspired by nature, to genuinely realize the practical utilization of the bio-organic super-architectures, it is beneficial to further organize the peptide self-assemblies to integrate the properties of the individual supermolecules and fabricate higher-level organizations for smart functional devices. Therefore, cumulative studies have been reported on peptide microfabrication giving rise to diverse properties. This review summarizes the recent development of the microfabrication of peptide self-assemblies, discussing each methodology along with the diverse properties and practical applications of the engineered peptide large-scale, highly-ordered organizations. Finally, the current limitations of the state-of-the-art microfabrication strategies are critically assessed and alternative solutions are suggested.

Self-Assembly of Nanowires: From Dynamic Monitoring to Precision Control

ConspectusNatural biomaterials often show ordered nanowire structures (ONWS) which display unique structural color or superior mechanical performance. Meanwhile, plenty of modern nanodevices with ONWS have flourished with activities focused on both basic and applied research. Manipulating synthetic nanowire (NW) from a disordered state to a hierarchically ordered structure via various assembly strategies brings about intriguing and exotic chemical/physical properties. In the past decades, many methods have been developed to assemble NWs and fabricate organized architectures, such as Langmuir-Blodgett interfacial assembly, spin-coating assembly, fluid-flow-induced assembly, and ice-template assembly. Nevertheless, for practical applications, large-scale and high-efficiency assembly strategies toward precise controlled architectures are largely limited by the lack understanding of assembly mechanisms. Especially, the manipulation principles and driving forces behind the state-of-art assembly strategies are still unclear. Besides, the lesser research attention on dynamic kinetics also impedes the revelation of the NW self-assembly mechanism. With the emergence of advanced in situ techniques, such as synchrotron-based X-ray techniques and in situ transmission electron microscopy (TEM), the dynamic monitoring of NW behavior in many practical environments becomes possible. In addition, the alignment direction and the stacking manner of NW film are of significance to the final performance. There is a lack of connection between the properties of one-dimensional nanoscale building blocks and the functionalities of the macro-assembly structures. To this end, dynamic monitoring is highly desired, which enables the precision modulation of NW assembly structure, leading to the discovery or prediction of new structures, novel properties, and performance optimization.In this Account, we aim to uncover the underlying kinetics of NW assembly or local reaction and mass transportation processes, as well as to build a solid connection from individual NWs to NW assembly structures with enhanced properties and eventually to macroscopic materials application. We first review the recent progress in state-of-art NW assembly strategies for diverse aligned structures according to the manipulation principle and the driving forces. To systematically review the NW self-assembly strategies, we categorize these strategies into three states: NWs on the liquid interface via surface tension, NW assembly in liquid via solution-shearing flow field, and NW assembly at the solid interval via physical repulsive force. Then, we introduce the existing advanced characterization techniques, including synchrotron-based X-ray scattering and in situ TEM, to dynamically monitor the intermediate states of the NW assembly and transport processes. The comprehensive understanding of this thermodynamic and kinetic mechanism facilitates the rational design, large scale, and high-efficiency fabrication of NW assemblies, thus promoting their applications in tailored optical-electrical electronics, smart electrochromic devices, electrocatalysis, structural materials, and chiral photonic crystals.

Plastering Sponge with Nanocarbon-Containing Slurry to Construct Mechanically Robust Macroporous Monolithic Catalysts for Direct Dehydrogenation of Ethylbenzene

Nanocarbons have shown great potential as a sustainable alternative to metal catalysts, but their powder form limits their industrial applications. The preparation of nanocarbon-based monolithic catalysts is a practical approach for overcoming the resulting pressure drop associated with their powder form. In our previous work, a ploycation-mediated approach was used to successfully prepare nanocarbon-containing monoliths. Unfortunately, because there are no macropores in the monolith, it needs to be crashed into millimeter-sized particles before application. Therefore, developing a facile method for preparing mechanically robust nanocarbon-based macroporous monolithic catalysts is vital but still challenging. Herein, evoked by swallows building their nests, we report an approach for successfully preparing a mechanically robust nanodiamond-based macroporous monolith catalyst by plastering melamine sponge (MS) with a slurry composed of nanodiamonds (NDs) and poly(imidazolium-methylene) chloride (PImM) followed by an annealing process. The macroporous monolith catalyst (ND/NC_MS-NC_PImM) containing NDs well dispersed in N-doped carbon is mechanically robust with enriched macroscopic pores. It exhibits outstanding catalysis toward ethylbenzene to styrene through a direct dehydrogenation reaction with a high styrene rate in a steady state (5.50 mmol g^-1 h^-1) and high styrene selectivity (99.5%). ND/NC_MS-NC_PImM shows much higher activity than powder ND by 1.9 fold. In addition, this work solves the significant problem of large pressure drop encountered with conventional powdered nanocarbon catalysts in the flow reactor. This work not only creates an excellent nanodiamond-based macroporous monolithic ethylbenzene direct dehydrogenation catalyst but also presents a promising avenue for preparing other macroporous monolithic catalysts for diverse transformations.

Hyper 100 °C Langmuir-Blodgett (Langmuir-Schaefer) Technique for Organized Ultrathin Film of Polymeric Semiconductors

In this study, we advanced the conventional Langmuir-Blodgett (LB) method to a high-temperature range (above 100 °C) using a newly manufactured LB machine, which is adaptable to a high-boiling-point subphase, as a universally usable apparatus. A sophisticated trough design, with homogeneous heating capability up to approximately 200 °C, together with automatic film compression and Langmuir-Schaefer type film transfer, enabled the fabrication of highly aligned thin films of polymeric semiconductors with uniaxial alignment of polymer backbones, which is desirable for efficient charge transport. Herein, ultrathin films of semicrystalline thiophene-based semiconductors were prepared on ethylene glycol and heated to 80 °C. The analyses of the transferred films with pressure-area isotherms, atomic force microscopy (AFM), polarized optical microscopy (POM), and grazing-incidence wide-angle X-ray scattering (GIWAXS) indicated that the proposed high-temperature LB method allows ideal deposition of high-quality ultrathin films with molecular layer precision at the selected high-temperature conditions. Furthermore, preparing thin-film donor-acceptor-type copolymers in ionic liquids at high temperatures (up to 140 °C) was a challenging task that was successfully demonstrated in this study. Highly ordered thin films of donor-acceptor polymers with a uniaxial backbone orientation were obtained only at 140 °C. The obtained semicrystalline thin films with uniaxially aligned polymer backbones significantly contribute to the two-dimensional overlap of molecular orbitals, which is likely to promote charge transport. The use of the manufactured automatic LB machines is advantageous for better quality films prepared at higher temperatures (even above 100 °C) from various technical viewpoints, including homogeneous heating, constant compression, and automatic film transfer. The novel methodology proposed herein expands the possibilities of the Hyper 100 °C Langmuir-Blodgett technique, which has not been accessible by the conventional LB method with the aqueous subphase.

Advances in Flexible Metallic Transparent Electrodes

Transparent electrodes (TEs) are pivotal components in many modern devices such as solar cells, light-emitting diodes, touch screens, wearable electronic devices, smart windows, and transparent heaters. Recently, the high demand for flexibility and low cost in TEs requires a new class of transparent conductive materials (TCMs), serving as substitutes for the conventional indium tin oxide (ITO). So far, ITO has been the most used TCM despite its brittleness and high cost. Among the different emerging alternative materials to ITO, metallic nanomaterials have received much interest due to their remarkable optical-electrical properties, low cost, ease of manufacturing, flexibility, and widespread applicability. These involve metal grids, thin oxide/metal/oxide multilayers, metal nanowire percolating networks, or nanocomposites based on metallic nanostructures. In this review, a comparison between TCMs based on metallic nanomaterials and other TCM technologies is discussed. Next, the different types of metal-based TCMs developed so far and the fabrication technologies used are presented. Then, the challenges that these TCMs face toward integration in functional devices are discussed. Finally, the various fields in which metal-based TCMs have been successfully applied, as well as emerging and potential applications, are summarized.

Water Quality Carbon Nanotube-Based Sensors Technological Barriers and Late Research Trends: A Bibliometric Analysis

Water is the key element that defines and individualizes our planet. Relative to body weight, water represents 70% or more for the majority of all species on Earth. Taking care of water as a whole is equivalent with taking care of the entire biodiversity or the whole of humanity itself. Water quality is becoming an increasingly important component of terrestrial life, hence intensive work is being conducted to develop sensors for detecting contaminants and assessing water quality and characteristics. Our bibliometric analysis is focused on water quality sensors based on carbon nanotubes and highlights the most important objectives and achievements of researchers in recent years. Due to important measurement characteristics such as sensitivity and selectivity, or low detection limit and linearity, up to the ability to measure water properties, including detection of heavy metal content or the presence of persistent organic compounds, carbon nanotube (CNT) sensors, taking advantage of available nanotechnologies, are becoming increasingly attractive. The conducted bibliometric analysis creates a visual, more efficient keystones mapping. CNT sensors can be integrated into an inexpensive real-time monitoring data acquisition system as an alternative for classical expensive and time-consuming offline water quality monitoring. The conducted bibliometric analysis reveals all connections and maps all the results in this water quality CNT sensors research field and gives a perspective on the approached methods on this specific type of sensor. Finally, challenges related to integration of other trends that have been used and proven to be valuable in the field of other sensor types and capable to contribute to the development (and outlook) for future new configurations that will undoubtedly emerge are presented.

There is still plenty of room for layer-by-layer assembly for constructing nanoarchitectonics-based materials and devices

Nanoarchitectonics approaches can produce functional materials from tiny units through combination of various processes including atom/molecular manipulation, chemical conversion, self-assembly/self-organization, microfabrication, and bio-inspired procedures. Existing fabrication approaches can be regarded as fitting into the same concept. In particular, the so-called layer-by-layer (LbL) assembly method has huge potential for preparing applicable materials with a great variety of assembling mechanisms. LbL assembly is a multistep process where different components can be organized in planned sequences while simple alignment options provide access to superstructures, for example helical structures, and anisotropies which are important aspects of nanoarchitectonics. In this article, newly-featured examples are extracted from the literature on LbL assembly discussing trends for composite functional materials according to (i) principles and techniques, (ii) composite materials, and (iii) applications. We present our opinion on the present trends, and the prospects of LbL assembly. While this method has already reached a certain maturity, there is still plenty of room for expanding its usefulness for the fabrication of nanoarchitectonics-based materials and devices.

Divalent Multilinking Bonds Control Growth and Morphology of Nanopolymers

Assembly of nanoscale objects into linear architectures resembling molecular polymers is a basic organization resulting from divalent interactions. Such linear architectures occur for particles with two binding patches on opposite sides, known as Janus particles. However, unlike molecular systems where valence bonds can be envisioned as pointlike interactions nanoscale patches are often realized through multiple molecular linkages. The relationship between the characteristics of these linkages, the resulting interpatch connectivity, and assembly morphology is not well-explored. Here, we investigate assembly behavior of model divalent nanomonomers, DNA nanocuboid with tailorable multilinking bonds. Our study reveals that the characteristics of individual molecular linkages and their collective properties have a profound effect on nanomonomer reactivity and resulting morphologies. Beyond linear nanopolymers, a common signature of divalent nanomonomers, we observe an effective valence increase as linkages lengthened, leading to the nanopolymer bundling. The experimental findings are rationalized by molecular dynamics simulations.

3D Printing-Enabled Nanoparticle Alignment: A Review of Mechanisms and Applications

3D printing (additive manufacturing (AM)) has enormous potential for rapid tooling and mass production due to its design flexibility and significant reduction of the timeline from design to manufacturing. The current state-of-the-art in 3D printing focuses on material manufacturability and engineering applications. However, there still exists the bottleneck of low printing resolution and processing rates, especially when nanomaterials need tailorable orders at different scales. An interesting phenomenon is the preferential alignment of nanoparticles that enhance material properties. Therefore, this review emphasizes the landscape of nanoparticle alignment in the context of 3D printing. Herein, a brief overview of 3D printing is provided, followed by a comprehensive summary of the 3D printing-enabled nanoparticle alignment in well-established and in-house customized 3D printing mechanisms that can lead to selective deposition and preferential orientation of nanoparticles. Subsequently, it is listed that typical applications that utilized the properties of ordered nanoparticles (e.g., structural composites, heat conductors, chemo-resistive sensors, engineered surfaces, tissue scaffolds, and actuators based on structural and functional property improvement). This review's emphasis is on the particle alignment methodology and the performance of composites incorporating aligned nanoparticles. In the end, significant limitations of current 3D printing techniques are identified together with future perspectives.

Structure-Dependent Chiroptical Properties of Twisted Multilayered Silver Nanowire Assemblies

The optical properties of chiral plasmonic metasurfaces depend strongly on their architecture, in particular the orientation and spacing between the individual building blocks assembled into large arrays. However, methods to obtain chiral metamaterials with fully tunable chiroptical properties in the UV, visible, and near-infrared range are scarce. Here, we show that the chiroptical properties of silver nanowires assembled in helical nanostructures by grazing incidence spraying and Layer-by-Layer assembly can be finely tuned over a broad wavelength range using simple design principles. The angle between the oriented nanowire layers controls the intensity of the circular dichroism, reaching ellipticity values higher than 13° and g-factor values up to 1.6, while the shape of the circular dichroism spectra depends strongly on the spacing between the layers which can be tuned at the nanometer scale. The structure-dependent optical properties of the assembly are successfully modeled using a transfer matrix approach.

Harnessing selectivity in chemical sensing via supramolecular interactions: from functionalization of nanomaterials to device applications

Chemical sensing is a strategic field of science and technology ultimately aiming at improving the quality of our lives and the sustainability of our Planet. Sensors bear a direct societal impact on well-being, which includes the quality and composition of the air we breathe, the water we drink, and the food we eat. Pristine low-dimensional materials are widely exploited as highly sensitive elements in chemical sensors, although they suffer from lack of intrinsic selectivity towards specific analytes. Here, we showcase the most recent strategies on the use of (supra)molecular interactions to harness the selectivity of suitably functionalized 0D, 1D, and 2D low-dimensional materials for chemical sensing. We discuss how the design and selection of receptors via machine learning and artificial intelligence hold a disruptive potential in chemical sensing, where selectivity is achieved by the design and high-throughput screening of large libraries of molecules exhibiting a set of affinity parameters that dictates the analyte specificity. We also discuss the importance of achieving selectivity along with other relevant characteristics in chemical sensing, such as high sensitivity, response speed, and reversibility, as milestones for true practical applications. Finally, for each distinct class of low-dimensional material, we present the most suitable functionalization strategies for their incorporation into efficient transducers for chemical sensing.

Nanoscale Bouligand Multilayers: Giant Circular Dichroism of Helical Assemblies of Plasmonic 1D Nano-Objects

Chirality is found at all length scales in nature, and chiral metasurfaces have recently attracted attention due to their exceptional optical properties and their potential applications. Most of these metasurfaces are fabricated by top-down methods or bottom-up approaches that cannot be tuned in terms of structure and composition. By combining grazing incidence spraying of plasmonic nanowires and nanorods and Layer-by-Layer assembly, we show that nonchiral 1D nano-objects can be assembled into scalable chiral Bouligand nanostructures whose mesoscale anisotropy is controlled with simple macroscopic tools. Such multilayer helical assemblies of linearly oriented nanowires and nanorods display very high circular dichroism up to 13 000 mdeg and giant dissymmetry factors up to g ≈ 0.30 over the entire visible and near-infrared range. The chiroptical properties of the chiral multilayer stack are successfully modeled using a transfer matrix formalism based on the experimentally determined properties of each individual layer. The proposed approach can be extended to much more elaborate architectures and gives access to template-free and enantiomerically pure nanocomposites whose structure can be finely tuned through simple design principles.

Microchemical Engineering in a 3D Ordered Channel Enhances Electrocatalysis

The kinetics of electrode reactions including mass transfer and surface reaction is essential in electrocatalysis, as it strongly determines the apparent reaction rates, especially on nanostructured electrocatalysts. However, important challenges still remain in optimizing the kinetics of given catalysts with suitable constituents, morphology, and crystalline design to maximize the electrocatalytic performances. We propose a comprehensive kinetic model coupling mass transfer and surface reaction on the nanocatalyst-modified electrode surface to explore and shed light on the kinetic optimization in electrocatalysis. Moreover, a theory-guided microchemical engineering (MCE) strategy has been demonstrated to rationally redesign the catalysts with optimized kinetics. Experimental measurements for methanol oxidation reaction in a 3D ordered channel with tunable channel sizes confirm the calculation prediction. Under the optimized channel size, mass transfer and surface reaction in the channeled microreactor are both well regulated. This MCE strategy will bring about a significant leap forward in structured catalyst design and kinetic modulation.

Polarization-dependent optical band gap energy of aligned semiconducting titanium oxide nanowire deposits

Thin deposits of aligned semiconducting titanium oxide and of zinc oxide nanowires are prepared by grazing incidence spraying on transparent substrates. By measuring the transmittance of linearly polarized light of these anisotropic assemblies as compared to that of randomly oriented nanowires and of spherical nanoparticles, we find that titanium oxide nanowires exhibit an orientation-dependent variation of the apparent optical band gap energy at room temperature (>100 meV), depending on the direction of the polarization of the light with respect to the direction of alignment of the nanowires.

Metal–Oxide Nanowire Molecular Sensors and Their Promises

During the past two decades, one–dimensional (1D) metal–oxide nanowire (NW)-based molecular sensors have been witnessed as promising candidates to electrically detect volatile organic compounds (VOCs) due to their high surface to volume ratio, single crystallinity, and well-defined crystal orientations. Furthermore, these unique physical/chemical features allow the integrated sensor electronics to work with a long-term stability, ultra-low power consumption, and miniature device size, which promote the fast development of “trillion sensor electronics” for Internet of things (IoT) applications. This review gives a comprehensive overview of the recent studies and achievements in 1D metal–oxide nanowire synthesis, sensor device fabrication, sensing material functionalization, and sensing mechanisms. In addition, some critical issues that impede the practical application of the 1D metal–oxide nanowire-based sensor electronics, including selectivity, long-term stability, and low power consumption, will be highlighted. Finally, we give a prospective account of the remaining issues toward the laboratory-to-market transformation of the 1D nanostructure-based sensor electronics.

One-dimensional assembly of β-form anhydrous guanine microrods

Biogenic guanine crystals exhibit excellent optical properties owing to their extremely high refractive index. However, there is no report related to the highly-ordered guanine assemblies in the synthetic systems. Herein, β-phase anhydrous guanine (β-AG) microrods were formed in mixed solvents of formamide and water in the presence of small organic molecules such as uric acid, pyrrole (Py), N-methyl-2-pyrrolidone (NMP), N-vinyl-2-pyrrolidone (NVP). The one-dimensional (1D) assembly of β-AG microrods form spontaneously in water, which is the first reported highly ordered 1D assembly of organic micro- or nanocrystals in the solution. The obtained β-AG microrods obtained in Py system can form reversible 1D assembly in water after being treated in organic solvents such as ethanol, acetone and isopropanol, which have high solubility in water. However, no reversible 1D assembly but only dispersed or aggregated guanine microrods formed in water after similar treatment in the other three organic solvents such as n-hexane, dichloroethane and petroleum ether with low solubility in water. Similar reversible assembly features can also be observed in other three systems, standard system, and NVP and NMP systems. The reversible 1D assemblies of guanine microrods in water and organic solvents with high solubility in water indicate that there is a strong interaction between the (100) planes of β-AG microrods in water. The oriented 1D assembly of guanine microrods with long axes perpendicular to the horizontal magnetic field can form in water under magnetic field.

Ordered polymer composite materials: challenges and opportunities

Polymer nanocomposites containing nanoscale fillers are an important class of materials due to their ability to access a wide variety of properties as a function of their composition. In order to take full advantage of these properties, it is critical to control the distribution of nanofillers within the parent polymer matrix, as this structural organization affects how the two constituent components interact with one another. In particular, new methods for generating ordered arrays of nanofillers represent a key underexplored research area, as emergent properties arising from nanoscale ordering can be used to introduce novel functionality currently inaccessible in random composites. The knowledge gained from developing such methods will provide important insight into the thermodynamics and kinetics associated with nanomaterial and polymer assembly. These insights will not only benefit researchers working on new composite materials, but will also deepen our understanding of soft matter systems in general. In this review, we summarize contemporary research efforts in manipulating nanofiller organization in polymer nanocomposites and highlight future challenges and opportunities for constructing ordered nanocomposite materials.

Electrically Transduced Gas Sensors Based on Semiconducting Metal Oxide Nanowires

Semiconducting metal oxide-based nanowires (SMO-NWs) for gas sensors have been extensively studied for their extraordinary surface-to-volume ratio, high chemical and thermal stabilities, high sensitivity, and unique electronic, photonic and mechanical properties. In addition to improving the sensor response, vast developments have recently focused on the fundamental sensing mechanism, low power consumption, as well as novel applications. Herein, this review provides a state-of-art overview of electrically transduced gas sensors based on SMO-NWs. We first discuss the advanced synthesis and assembly techniques for high-quality SMO-NWs, the detailed sensor architectures, as well as the important gas-sensing performance. Relationships between the NWs structure and gas sensing performance are established by understanding general sensitization models related to size and shape, crystal defect, doped and loaded additive, and contact parameters. Moreover, major strategies for low-power gas sensors are proposed, including integrating NWs into microhotplates, self-heating operation, and designing room-temperature gas sensors. Emerging application areas of SMO-NWs-based gas sensors in disease diagnosis, environmental engineering, safety and security, flexible and wearable technology have also been studied. In the end, some insights into new challenges and future prospects for commercialization are highlighted.

Current Trends in Nanomaterials for Metal Oxide-Based Conductometric Gas Sensors: Advantages and Limitations. Part 1: 1D and 2D Nanostructures

This article discusses the main uses of 1D and 2D nanomaterials in the development of conductometric gas sensors based on metal oxides. It is shown that, along with the advantages of these materials, which can improve the parameters of gas sensors, there are a number of disadvantages that significantly limit their use in the development of devices designed for the sensor market.