Mesoporous Fe3O4/SiO2/poly(2-carboxyethyl acrylate) composite polymer particles for pH-responsive loading and targeted release of bioactive molecules

pH-responsive polymer microspheres undergoing reversible changes in their surface properties have been proved useful for drug delivery to targeted sites. This paper is aimed at preparing pH-responsive polymer-modified magnetic mesoporous SiO2 particles. First, mesoporous magnetic (Fe3O4) core-particles are prepared using a one-pot solvothermal method. Then, magnetic Fe3O4 particles are covered with a C[double bond, length as m-dash]C functional mesoporous SiO2 layer before seeded emulsion polymerization of 2-carboxyethyl acrylate (2-CEA). The composite polymer particles are named Fe3O4/SiO2/P(2-CEA). The average diameters of the Fe3O4 core and Fe3O4/SiO2/P(2-CEA) composite polymer particles are 414 and 595 nm, respectively. The mesoporous (pore diameter = 3.41 nm) structure of Fe3O4/SiO2/P(2-CEA) composite polymer particles is confirmed from Brunauer-Emmett-Teller (BET) surface analysis. The synthesized Fe3O4/SiO2/P(2-CEA) composite polymer exhibited pH-dependent changes in volume and surface charge density due to deprotonation of the carboxyl group under alkaline pH conditions. The change in the surface properties of Fe3O4/SiO2/P(2-CEA) composite polymer particles following pH change is confirmed from the pH-dependent sorption of cationic methylene blue (MB) and anionic methyl orange (MO) dye molecules. The opening of the pH-responsive P(2-CEA) gate valve at pH 10.0 allowed the release of loaded vancomycin up to 99% after 165 min and p-acetamido phenol (p-AP) up to 46% after 225 min. Comparatively, the amount of release is lower at pH 8.0 but still suitable for drug delivery applications. These results suggested that the mesoporous Fe3O4/SiO2 composite seed acted as a microcapsule, while P(2-CEA) functioned as a gate valve across the porous channel. The prepared composite polymer can therefore be useful for treating intestine/colon cancer, where the pH is comparatively alkaline.

Controllable construction of ZIF-derived Co9S8 hollow polyporous polyhedrons with Ru-doping for enhanced hydrogen evolution reaction

Ru-doped Co9S8 hollow porous polyhedrons (Ru-Co9S8 HPPs) derived from zeolitic-imidazolate-frameworks were synthesized through hydrothermal coprecipitation and thermal decomposition methods. The results indicate that Ru-Co9S8-500 HPPs possess a strong Ru-Co synergistic effect, large electrochemical surface area, and sufficient active sites, endowing them with excellent hydrogen evolution reaction performance.

Effective Reduction of CO2 with Aromatic Amines into N-Formamides Triggered by Noble-Free Metal-Organic Framework Catalysts Under Mild Conditions

The reductive transformation of carbon dioxide (CO2) into high-valued N‑formamides matches well with the atom economy and the sustainable development intention. Nevertheless, developing a noble-free metal catalyst under mild reaction conditions is desirable and challenging. Herein, a caged metal-organic framework (MOFs) [H2N(CH3)2]2{[Ni3(µ3-O)(XN)(BDC)3]·6DMF}n (1) (XN = 6″-(pyridin-4-yl)-4,2″:4″,4″'-terpyridine), H2BDC = terephthalic acid) is harvested, presenting high thermal and chemical stabilities. Catalytic investigation reveals that 1 as a renewable noble-free MOFs catalyst can catalyze the CO2 reduction conversion with aromatic amines tolerated by broad functional groups at least ten times, resulting in various formamides in excellent yields and selectivity under the mildest reaction system (room temperature and 1 bar CO2). Density functional theory (DFT) theoretical studies disclose the applicable reaction path, in which the CO2 hydrosilylation process is initiated by the [Ni3] cluster interaction with CO2 via η2-C, O coordination mode. This work may open up an avenue to seek high-efficiency noble-free catalysts in CO2 chemical reduction into high value-added chemicals.

Strengthening Sn-MOF with SiO2/GeO2 Nanoparticles for Synergistically Enhanced High Capacity and Cycle Stability

Metal-organic frameworks (MOFs) based on tin (Sn) have shown great potential as materials for lithium storage, thanks to their ability to alleviate volume expansion due to the homogeneous distribution of Sn in a porous matrix framework. However, the weak mechanical strength of the porous Sn-MOF structure has been a major challenge, leading to pulverization during the discharging/charging process. To overcome this issue, we have developed a feasible strategy to strengthen the Sn-MOF mechanical properties by incorporating SiO2/GeO2 nanoparticles during the synthesis process. The resulting composites of Sn-Si and Sn-Ge exhibited high energy density and long-term cycle stability, thanks to their synergistic effect in alloying and conversion reactions. Our density functional theory (DFT) calculations have revealed that the rigid SiO2/GeO2 nanoparticles enhance the Sn-MOF mechanical properties, including Young's and shear moduli, which contribute to the long-term cycle stability of these composites.

Exploring the Water Oxidation Catalytic Activity of a Mn-Based Magnetic Metal-Organic Framework: The Role of Proton Conductivity and Oxygen Evolution Reaction Overpotential

The present work evaluates the water oxidation catalytic activity of a Mn-based metal-organic framework (MOF), which we envisioned to reduce the oxygen evolution reaction (OER) overpotential because of its high electrical conductivity, facilitated by solvent-encapsulated structural features. The presence of Mn centers induces interesting magnetic features in the MOF, which exhibits impressive cryogenic magnetic refrigeration with a ΔSM value of 29.94 J kg-1 K-1 for a field change of ΔH = 5T at 2.3 K. To the best of our knowledge, the ΔSM value of the current system ranked the highest position among the published examples. The crystal structure aligns perfectly with the thematic expectations and features as many as ten metal-coordinated water molecules, forming an extensive web of a hydrogen-bonded network while facing toward the porous channel filled with another set of much-anticipated entrapped lattice water molecules. Such structural features are expected to manifest high proton conductivity, and detailed investigation indeed yields the best value for the system at 1.57 × 10-4 S/cm at 95% humidity and 85 °C. In order to evaluate the thematic notion of a one-to-one relationship between OER and improved electrical conductivity, extensive electrocatalytic water splitting (WS) investigations were carried out. The final results show highly encouraging WS ability of the Mn-MOF, showing the electrocatalytic surface area value of the active species as 0.0686 F/g with a turnover frequency value of 0.043 [(mol. O2) (mol. Mn-MOF)-1 s-1]. Another fascinating aspect of the current communication is the excellent synergy observed between the experimental WS outcomes and the corresponding theoretical data calculated using density functional theory (DFT). Consequently, a plausible mechanism of the overall OER and the role of the Mn-MOF as a water oxidation catalyst, along with the importance of water molecules, have also been derived from the theoretical calculations using DFT.

Metalation of metal-organic frameworks: fundamentals and applications

Metalation of metal-organic frameworks (MOFs) has been developed as a prominent strategy for materials functionalization for pore chemistry modulation and property optimization. By introducing exotic metal ions/complexes/nanoparticles onto/into the parent framework, many metallized MOFs have exhibited significantly improved performance in a wide range of applications. In this review, we focus on the research progress in the metalation of metal-organic frameworks during the last five years, spanning the design principles, synthetic strategies, and potential applications. Based on the crystal engineering principles, a minor change in the MOF composition through metalation would lead to leveraged variation of properties. This review starts from the general strategies established for the incorporation of metal species within MOFs, followed by the design principles to graft the desired functionality while maintaining the porosity of frameworks. Facile metalation has contributed a great number of bespoke materials with excellent performance, and we summarize their applications in gas adsorption and separation, heterogeneous catalysis, detection and sensing, and energy storage and conversion. The underlying mechanisms are also investigated by state-of-the-art techniques and analyzed for gaining insight into the structure-property relationships, which would in turn facilitate the further development of design principles. Finally, the current challenges and opportunities in MOF metalation have been discussed, and the promising future directions for customizing the next-generation advanced materials have been outlined as well.

Zn-based batteries for sustainable energy storage: strategies and mechanisms

Batteries play a pivotal role in various electrochemical energy storage systems, functioning as essential components to enhance energy utilization efficiency and expedite the realization of energy and environmental sustainability. Zn-based batteries have attracted increasing attention as a promising alternative to lithium-ion batteries owing to their cost effectiveness, enhanced intrinsic safety, and favorable electrochemical performance. In this context, substantial endeavors have been dedicated to crafting and advancing high-performance Zn-based batteries. However, some challenges, including limited discharging capacity, low operating voltage, low energy density, short cycle life, and complicated energy storage mechanism, need to be addressed in order to render large-scale practical applications. In this review, we comprehensively present recent advances in designing high-performance Zn-based batteries and in elucidating energy storage mechanisms. First, various redox mechanisms in Zn-based batteries are systematically summarized, including insertion-type, conversion-type, coordination-type, and catalysis-type mechanisms. Subsequently, the design strategies aiming at enhancing the electrochemical performance of Zn-based batteries are underscored, focusing on several aspects, including output voltage, capacity, energy density, and cycle life. Finally, challenges and future prospects of Zn-based batteries are discussed.

Electrochemical coupling in subnanometer pores/channels for rechargeable batteries

Subnanometer pores/channels (SNPCs) play crucial roles in regulating electrochemical redox reactions for rechargeable batteries. The delicately designed and tailored porous structure of SNPCs not only provides ample space for ion storage but also facilitates efficient ion diffusion within the electrodes in batteries, which can greatly improve the electrochemical performance. However, due to current technological limitations, it is challenging to synthesize and control the quality, storage, and transport of nanopores at the subnanometer scale, as well as to understand the relationship between SNPCs and performances. In this review, we systematically classify and summarize materials with SNPCs from a structural perspective, dividing them into one-dimensional (1D) SNPCs, two-dimensional (2D) SNPCs, and three-dimensional (3D) SNPCs. We also unveil the unique physicochemical properties of SNPCs and analyse electrochemical couplings in SNPCs for rechargeable batteries, including cathodes, anodes, electrolytes, and functional materials. Finally, we discuss the challenges that SNPCs may face in electrochemical reactions in batteries and propose future research directions.

Single-Atomic Co-N4 Sites with CrCo Nanoparticles for Metal-Air Battery-Driven Hydrogen Evolution

Designing highly active and robust earth abundant trifunctional electrocatalysts for energy storage and conversion applications remain an enormous challenge. Herein, we report a trifunctional electrocatalyst (CrCo/CoN4@CNT-5), synthesized at low calcination temperature (550 °C), which consists of Co-N4 single atom and CrCo alloy nanoparticles and exhibits outstanding electrocatalytic performance for the hydrogen evolution reaction, oxygen evolution reaction, and oxygen reduction reaction. The catalyst is able to deliver a current density of 10 mA cm-2 in an alkaline electrolytic cell at a very low cell voltage of ∼1.60 V. When the catalyst is equipped in a liquid rechargeable Zn-air battery, it endowed a high open-circuit voltage with excellent cycling durability and outperformed the commercial Pt/C+IrO2 catalytic system. Furthermore, the Zn-air battery powered self-driven water splitting system is displayed using CrCo/CoN4@CNT-5 as sole trifunctional catalyst, delivering a high H2 evolution rate of 168 μmol h-1. Theoretical calculations reveal synergistic interaction between Co-N4 active sites and CrCo nanoparticles, favoring the Gibbs free energy for H2 evolution. The presence of Cr not only enhances the H2O adsorption and dissociation but also tunes the electronic property of CrCo nanoparticles to provide optimized hydrogen binding capacity to Co-N4 sites, thus giving rise to accelerated H2 evolution kinetics. This work highlights the importance of the presence of small quantity of Cr in enhancing the electrocatalytic activity as well as robustness of single-atom catalyst and suggests the design of the multifunctional robust electrocatalysts for long-term H2 evolution application.

Metal-Organic Framework-Based Materials for Advanced Sodium Storage: Development and Anticipation

As a pioneering battery technology, even though sodium-ion batteries (SIBs) are safe, non-flammable, and capable of exhibiting better temperature endurance performance than lithium-ion batteries (LIBs), because of lower energy density and larger ionic size, they are not amicable for large-scale applications. Generally, the electrochemical storage performance of a secondary battery can be improved by monitoring the composition and morphology of electrode materials. Because more is the intricacy of a nanostructured composite electrode material, more electrochemical storage applications would be expected. Despite the conventional methods suitable for practical production, the synthesis of metal-organic frameworks (MOFs) would offer enormous opportunities for next-generation battery applications by delicately systematizing the structure and composition at the molecular level to store sodium ions with larger sizes compared with lithium ions. Here, the review comprehensively discusses the progress of nanostructured MOFs and their derivatives applied as negative and positive electrode materials for effective sodium storage in SIBs. The commercialization goal has prompted the development of MOFs and their derivatives as electrode materials, before which the synthesis and mechanism for MOF-based SIB electrodes with improved sodium storage performance are systematically discussed. Finally, the existing challenges, possible perspectives, and future opportunities will be anticipated.

Piezofluorochromism in Hierarchical Porous π-stacked Supermolecular Spring Frameworks from Aromatic Chiral Cages

Piezochromic materials that exhibit pressure-dependent luminescence variations are attracting interest with wide potential applications in mechanical sensors, anticounterfeiting and storage devices. Crystalline porous materials (CPMs) have been widely studied in piezochromism for highly tunable luminescence. Nevertheless, reversible and high-contrast emission response with a wide pressure range is still challenging. Herein, the first example of hierarchical porous cage-based πOF (Cage-πOF-1) with spring structure was synthesized by using aromatic chiral cages as building blocks. Its elastic properties evaluated based on the bulk modulus (9.5 GPa) is softer than most reported CPMs and the collapse point (20.0 GPa) significantly exceeds ever reported CPMs. As smart materials, Cage-πOF-1 displays linear pressure-dependent emission and achieves a high-contrast emission difference up to 154 nm. Pressure-responsive limit is up to 16 GPa, outperforming the CPMs reported so far. Dedicated experiments and density functional theory (DFT) calculations illustrate that π-π interactions-dominated controllable structural shrinkage and porous-spring-structure-mediated elasticity is responsible for the outstanding piezofluorochromism.

Crystalline Dual-Porous Covalent Triazine Frameworks as a New Platform for Efficient Electrocatalysis

Crystalline covalent triazine frameworks (CTFs) have gained considerable interest in energy and catalysis owing to their well-defined nitrogen-rich π-conjugated porosity and superior physicochemical properties, however, suffer from very limited molecular structures. Herein we report a novel solvent-free FeCl3 -catalyzed polymerization of 2, 6-pyridinedicarbonitrile (DCP) to achieve the first synthesis of crystalline, dual-porous, pyridine-based CTF (Fe-CTF). The FeCl3 could not only act as a highly active Lewis acid catalyst for promoting the two-dimensional ordered polymerization of DCP monomers, but also in situ coordinate with the tridentate chelators generated between pyridine and triazine groups to yield unique Fe-N3 single-atom active sites in Fe-CTF. Abundant few-layer crystalline nanosheets (Fe-CTF NSs) could be prepared through simple ball-milling exfoliation of the bulk layered Fe-CTF and exhibited remarkable electrocatalytic performance for oxygen reduction reaction (ORR) with a half-wave potential and onset potential up to 0.902 and 1.02 V respectively, and extraordinary Zn-air battery performance with an ultrahigh specific capacity and power density of 811 mAh g-1 and 230 mW cm-2 respectively. By combining operando X-ray absorption spectroscopy with density functional theory calculations, we revealed a dynamic and reversible evolution of Fe-N3 to Fe-N2 during the electrocatalytic process, which could further accelerate the electrocatalytic reaction.

Engineering organic polymers as emerging sustainable materials for powerful electrocatalysts

Cost-effective and high-efficiency catalysts play a central role in various sustainable electrochemical energy conversion technologies that are being developed to generate clean energy while reducing carbon emissions, such as fuel cells, metal-air batteries, water electrolyzers, and carbon dioxide conversion. In this context, a recent climax in the exploitation of advanced earth-abundant catalysts has been witnessed for diverse electrochemical reactions involved in the above mentioned sustainable pathways. In particular, polymer catalysts have garnered considerable interest and achieved substantial progress very recently, mainly owing to their pyrolysis-free synthesis, highly tunable molecular composition and microarchitecture, readily adjustable electrical conductivity, and high stability. In this review, we present a timely and comprehensive overview of the latest advances in organic polymers as emerging materials for powerful electrocatalysts. First, we present the general principles for the design of polymer catalysts in terms of catalytic activity, electrical conductivity, mass transfer, and stability. Then, the state-of-the-art engineering strategies to tailor the polymer catalysts at both molecular (i.e., heteroatom and metal atom engineering) and macromolecular (i.e., chain, topology, and composition engineering) levels are introduced. Particular attention is paid to the insightful understanding of structure-performance correlations and electrocatalytic mechanisms. The fundamentals behind these critical electrochemical reactions, including the oxygen reduction reaction, hydrogen evolution reaction, CO2 reduction reaction, oxygen evolution reaction, and hydrogen oxidation reaction, as well as breakthroughs in polymer catalysts, are outlined as well. Finally, we further discuss the current challenges and suggest new opportunities for the rational design of advanced polymer catalysts. By presenting the progress, engineering strategies, insightful understandings, challenges, and perspectives, we hope this review can provide valuable guidelines for the future development of polymer catalysts.

Polyoxometalate-Modified g-C3N4 Composites with High Work Function for Triboelectric Nanogenerators

Designing friction materials with high electron storage capacity, high work function, low cost, and high stability is an important method to improve the output performance of a triboelectric nanogenerator (TENG). Here, we report two kinds of friction materials based on Keggin-type polyoxometalates (POMs)-modified graphite carbon nitride (g-C3N4), namely, g-C3N4@PMo12 and g-C3N4@PW12, and form TENG with commercial indium tin oxide/poly(ethylene terephthalate) (ITO/PET) electrodes. The performance test shows that the g-C3N4@PMo12 TENG device exhibits a high output voltage of about 78 V, a current of about 657 nA, and a transfer charge of about 15 nC, which is more than 3 times higher than that of unmodified TENG. This performance improvement is attributed to the fact that POM loaded on the surface of g-C3N4 can be used as a shallow electron trap to increase the electron storage capacity through electron interaction and to increase the charge density on the surface of the material by increasing the work function of the composite. This work not only broadens the choices of TENG friction materials but also offers a practical means of enhancing TENG's output performance.

Synthesis of Electrical Conductive Metal-Organic Frameworks for Electrochemical Applications

Electrical conductivity is very important property of nanomaterials for using wide range of applications especially energy applications. Metal-organic frameworks (MOFs) are notorious for their low electrical conductivity and less considered for usage in pristine forms. However, the advantages of high surface area, porosity and confined catalytic active sites motivated researchers to improve the conductivity of MOFs. Therefore, 2D electrical conductive MOFs (ECMOF) have been widely synthesized by developing the effective synthetic strategies. In this article, we have summarized the recent trends in developing the 2D ECMOFs, following the summary of potential applications in the various fields with future perspectives.

Progress and Perspectives on Promising Covalent-Organic Frameworks (COFs) Materials for Energy Storage Capacity

In recent years, a new class of highly crystalline advanced permeable materials covalent-organic frameworks (COFs) have garnered a great deal of attention thanks to their remarkable properties, such as their large surface area, highly ordered pores and channels, and controllable crystalline structures. The lower physical stability and electrical conductivity, however, prevent them from being widely used in applications like photocatalytic activities and innovative energy storage and conversion devices. For this reason, many studies have focused on finding ways to improve upon these interesting materials while also minimizing their drawbacks. This review article begins with a brief introduction to the history and major milestones of COFs development before moving on to a comprehensive exploration of the various synthesis methods and recent successes and signposts of their potential applications in carbon dioxide (CO2 ) sequestration, supercapacitors (SCs), lithium-ion batteries (LIBs), and hydrogen production (H2 -energy). In conclusion, the difficulties and potential of future developing with highly efficient COFs ideas for photocatalytic as well as electrochemical energy storage applications are highlighted.

Binary Metal-Oxide Active Sites Derived from Cu-Doped MIL-88 with Enhanced Electroactivity for Nitrate Reduction

Nitrate-to-ammonia electrochemical conversion is important for decreasing water pollution and increasing the production of valuable ammonia. However, achieving high ammonium production without undesirable byproducts is difficult. Cu-doped MIL-88-derived bimetallic oxide catalysts with electrocatalytically active Fe-O-Cu bridges, which have high NO3- adsorption energy and facilitate N-intermediate hydrogenation, are developed for NH4+ production. Cu doping promotes hybridization between the O 2p of NO3- and Fe-Cu 3d, facilitating the adsorption and reduction of NO3- with a low Tafel slope (62.1 mV dec-1) and high ammonia yield (1698.8 μg·h-1·cm-2). The cathode efficiency is stable for seven cycles. Cu adjacent to Fe sites inhibits hydrogen evolution, promotes NO3- adsorption, and decreases the intermediate adsorption energy barrier. This study provides new opportunities for fabricating diverse binary metal oxides with new interfaces as efficient cathode materials for selective electroreduction.

Covalent organic frameworks: linkage types, synthetic methods and bio-related applications

Covalent organic frameworks (COFs) are composed of small organic molecules linked via covalent bonds, which have tunable mesoporous structure, good biocompatibility and functional diversities. These excellent properties make COFs a promising candidate for constructing biomedical nanoplatforms and provide ample opportunities for nanomedicine development. A systematic review of the linkage types and synthesis methods of COFs is of indispensable value for their biomedical applications. In this review, we first summarize the types of various linkages of COFs and their corresponding properties. Then, we highlight the reaction temperature, solvent and reaction time required by different synthesis methods and show the most suitable synthesis method by comparing the merits and demerits of various methods. To appreciate the cutting-edge research on COFs in bioscience technology, we also summarize the bio-related applications of COFs, including drug delivery, tumor therapy, bioimaging, biosensing and antimicrobial applications. We hope to provide insight into the interdisciplinary research on COFs and promote the development of COF nanomaterials for biomedical applications and their future clinical translations.

Synchronous embedded growth of Mo2C nanodisk arrays immobilized on porous carbon nanosheets for ultra-stable sodium storage

Sodium ion capacitors (SICs) that combine the merits of both rechargeable batteries and supercapacitors have gained widespread recognition for their high energy density and extended cycle life as new energy storage devices. However, the purposeful design of advanced battery-type anodes has become an urgent need to remedy the dynamics mismatch with the capacitive cathode. Herein, we propose a simple but efficient bottom-up approach to build three-dimensional Mo2C/C hybrid architectures in situ as anodes for SICs. By finely regulating the ratio of carbon and molybdenum sources, the optimized Mo2C/C, where even thinner subunit assembled Mo2C nanodisk (∼47.1 nm in thickness) arrays are immobilized on carbon nanosheet substrate via the synchronous embedded growth, rapid electron and ion diffusion/transport expressways, abundant active sites and robust structural stability were achieved for efficient sodium storage. Benefiting from the synergistic contributions of the components, the optimum Mo2C/C anode displays an outstanding rate and long-cycle properties as a competitive anode. Moreover, the constructed Mo2C/C-based SICs exhibited an energy density of ∼16.7 W h kg-1 at 10 kW h kg-1, along with ∼22.5% capacitance degradation over 4000 cycles at 1 A g-1. This contribution will guide the precise synthesis of other versatile Mo2C-based hybrids towards energy-related applications and beyond.

Self-Reconstructed Two-Dimensional Cluster-Based Co-Organic Layer Heterojunctions for Enhanced Oxygen Evolution Reactions

When it comes to an efficient catalytic oxygen evolution reaction (OER) in the production of renewable energy and chemicals, the construction of heterogeneous structures is crucial to break the linear scalar relationship of a single catalyst. This heterogeneous structure construction helps creatively achieve high activity and stability. However, the synthesis process of heterogeneous crystalline materials is often complex and challenging to capture and reproduce, which limits their application. Here, the dynamic process of structural changes in Co-MOFs in alkali was captured by in situ powder X-ray diffraction, FT-IR spectroscopy, and Raman spectroscopy, and several self-reconfigured MOF heterogeneous materials with different structures were stably isolated. The created β-Co(OH)2/Co-MOF heterojunction structure facilitates rapid mass-charge transfer and exposure of active sites, which significantly enhanced OER activity. Experimental results show that this heterogeneous structure achieves a low overpotential of 333 mV at 10 mA cm-2. The findings provide new insights and directions for the search for highly reactive cobalt-based MOFs for sustainable energy technologies.

Advances of Electroactive Metal-Organic Frameworks

The preparation of electroactive metal-organic frameworks (MOFs) for applications of supercapacitors and batteries has received much attention and remarkable progress during the past few years. MOF-based materials including pristine MOFs, hybrid MOFs or MOF composites, and MOF derivatives are well designed by a combination of organic linkers (e.g., carboxylic acids, conjugated aromatic phenols/thiols, conjugated aromatic amines, and N-heterocyclic donors) and metal salts to construct predictable structures with appropriate properties. This review will focus on construction strategies of pristine MOFs and hybrid MOFs as anodes, cathodes, separators, and electrolytes in supercapacitors and batteries. Descriptions and discussions follow categories of electrochemical double-layer capacitors (EDLCs), pseudocapacitors (PSCs), and hybrid supercapacitors (HSCs) for supercapacitors. In contrast, Li-ion batteries (LIBs), Lithium-sulfur batteries (LSBs), Lithium-oxygen batteries (LOBs), Sodium-ion batteries (SIBs), Sodium-sulfur batteries (SSBs), Zinc-ion batteries (ZIBs), Zinc-air batteries (ZABs), Aluminum-sulfur batteries (ASBs), and others (e.g., LiSe, NiZn, H⁺ , alkaline, organic, and redox flow batteries) are categorized for batteries.

2D Metal-Organic Frameworks as Competent Electrocatalysts for Water Splitting

Hydrogen, a clean and flexible energy carrier, can be efficiently produced by electrocatalytic water splitting. To accelerate the sluggish hydrogen evolution reaction and oxygen evolution reaction kinetics in the splitting process, highly active electrocatalysts are essential for lowering the energy barriers, thereby improving the efficiency of overall water splitting. Combining the distinctive advantages of metal-organic frameworks (MOFs) with the physicochemical properties of 2D materials such as large surface area, tunable structure, accessible active sites, and enhanced conductivity, 2D MOFs have attracted intensive attention in the field of electrocatalysis. Different strategies, such as improving the conductivities of MOFs, reducing the thicknesses of MOF nanosheets, and integrating MOFs with conductive particles or substrates, are developed to promote the catalytic performances of pristine MOFs. This review summarizes the recent advances of pristine 2D MOF-based electrocatalysts for water electrolysis. In particular, their intrinsic electrocatalytic properties are detailly analyzed to reveal important roles of inherent MOF active centers, or other in situ generated active phases from MOFs responsible for the catalytic reactions. Finally, the challenges and development prospects of pristine 2D MOFs for the future applications in overall water splitting are discussed.

Fabrication of a SnO2-Sb nano-pin array anode for efficient electrocatalytic oxidation of bisphenol A in wastewater

Electrocatalytic oxidation is a promising technology for eliminating bio-recalcitrant organic pollutants; however, the low efficiency and poor durability of the anodes hinder its practical application. Herein, a SnO₂-Sb nano-pin array (NPA) was fabricated on a RuO₂-based dimensionally stable anode (DSA) via a new hydrothermal-electrodeposition route to prepare a novel anode (SnO₂-Sb NPA). Compared with the conventional SnO₂-Sb/DSA and SnO₂-Sb/Ti anodes, the new SnO₂-Sb NPA anode possessed twice the electroactive surface area and a higher electron transfer efficiency for electrocatalytic reactions. The SnO₂-Sb NPA anode exhibited more than twice the rate constant of bisphenol A (BPA) degradation (0.026 min^-1) and a 120 times prolonged service life in comparison to the conventional SnO₂-Sb/Ti anode. Moreover, the SnO₂-Sb NPA anode performed well in removing BPA from actual wastewater. The mechanism of electrocatalytic degradation involves direct oxidation via electron transfer through the nano-pin surface and oxidation by in situ generated •OH radicals.

Interfacing MnO and FeCo alloy inside N-doped carbon hierarchical porous nanospheres derived from metal-organic framework to boost high-performance oxygen reduction for Zn-air batteries

Efficient and strong non-precious metal catalysts are urgently needed for the oxygen reduction reaction (ORR). Here, a facile hydrothermal-pyrolysis process was implemented to engineer CoFe-MnO heterointerfaces encapsulated in N-doped carbon (CFM-NC) nanospheres with a metal-organic framework (MOF) as the precursor. Due to heterointerfaces and hierarchical porosity, CFM-NC-800 exhibited superior ORR activity (half-wave potential of 0.86 V) and durability (30 000 s). Importantly, CFM-NC-800-based Zn-air batteries (ZABs) were capable of extending the outstanding performance, with a high power density of 260 mW cm^-2 and a specific capacity of 812 mA h g^-1. Furthermore, the CFM-NC-800-RuO₂-based ZABs showed remarkable stability (480 cycles), outperforming Pt/C-RuO₂ (360 cycles). This work highlights the effects of CoFe-MnO heterointerfaces and hierarchical porosity in ORR electrocatalysis, thereby providing a new avenue for energy conversion and storage.

Recent Progress of Advanced Conductive Metal-Organic Frameworks: Precise Synthesis, Electrochemical Energy Storage Applications, and Future Challenges

Metal-organic frameworks (MOFs) with diverse composition, tunable structure, and unique physicochemical properties have emerged as promising materials in various fields. The tunable pore structure, abundant active sites, and ultrahigh specific surface area can facilitate mass transport and provide outstanding capacity, making MOFs an ideal active material for electrochemical energy storage and conversion. However, the poor electrical conductivity of pristine MOFs severely limits their applications in electrochemistry. Developing conductive MOFs has proved to be an effective solution to this problem. This review focuses on the design and synthesis of conductive MOF composites with judiciously chosen conducting materials, pristine MOFs, and assembly methods, as well as the preparation of intrinsically conductive MOFs based on building 2D π-conjugated structures, introducing mixed-valence metal ions/redox-active ligands, designing π-π stacked pathways, and constructing infinite metal-sulfur chains (-M-S-)_∞ . Furthermore, recent progress and challenges of conductive MOFs for energy storage and conversion (supercapacitors, Li-ion batteries, Li-S batteries, and electrochemical water splitting) are summarized.

Molecular and Morphological Engineering of Organic Electrode Materials for Electrochemical Energy Storage

Organic electrode materials (OEMs) can deliver remarkable battery performance for metal-ion batteries (MIBs) due to their unique molecular versatility, high flexibility, versatile structures, sustainable organic resources, and low environmental costs. Therefore, OEMs are promising, green alternatives to the traditional inorganic electrode materials used in state-of-the-art lithium-ion batteries. Before OEMs can be widely applied, some inherent issues, such as their low intrinsic electronic conductivity, significant solubility in electrolytes, and large volume change, must be addressed. In this review, the potential roles, energy storage mechanisms, existing challenges, and possible solutions to address these challenges by using molecular and morphological engineering are thoroughly summarized and discussed. Molecular engineering, such as grafting electron-withdrawing or electron-donating functional groups, increasing various redox-active sites, extending conductive networks, and increasing the degree of polymerization, can enhance the electrochemical performance, including its specific capacity (such as the voltage output and the charge transfer number), rate capability, and cycling stability. Morphological engineering facilitates the preparation of different dimensional OEMs (including 0D, 1D, 2D, and 3D OEMs) via bottom-up and top-down methods to enhance their electron/ion diffusion kinetics and stabilize their electrode structure. In summary, molecular and morphological engineering can offer practical paths for developing advanced OEMs that can be applied in next-generation rechargeable MIBs.

Graphical abstract

Promoting the Oxygen Evolution Reaction via Morphological Manipulation of a Lamellar Nanorod-Assembled Ni(II)-Pyrazolate Superstructure

Nanoscale pyrazolate-based coordination polymers (CPs) are becoming increasingly popular as electrocatalysts owing to their customizable compositions and structures. However, using them for oxygen evolution reaction (OER) is highly challenging due to their unsatisfactory catalytic efficiency and relatively low stability. Herein, a simple one-step solvothermal process was employed for the fabrication of polycrystalline nickel-pyrazolate [Ni(Pz)] with an unusual lamellar nanorod-assembled microsphere morphology for the first time using ethanol as a green organic solvent via controlling other physical parameters. Meanwhile, the Ni(Pz) structure and morphology are investigated to derive its formation process following the different monomeric feed ratios relying on the metal/ligand interactions of CP. Shaping the Ni(Pz) electrocatalyst in well-oriented lamellar nanorod-assembled microspheres brings the advantage of porosity and high specific surface area, which expedites mass/charge transport and contact with the electrolyte as well as creates less tortuous pathways for charge distribution, thus improving the charge homogeneity. These high-class structural features and polycrystalline nature of Ni(Pz)-E-PVP facilitate amazing catalytic OER activity with a low overpotential of 290 mV at 10 mA cm^-2 and a Tafel slope of only 94 mV dec^-1 beyond the yardstick material (i.e., RuO₂) in alkaline solution. A suite of measurements, entailing X-ray photoelectron spectroscopy and density functional theory calculations, suggest that the rich Ni-N₄ moieties in Ni(Pz)-E-PVP are central species providing adsorption sites for OER intermediates. This facile protocol is prophesied to commence the imminent development of noble metal-free, effective, and low-priced electrocatalysts for OER.

Iminium-Bridged Resorcinol-Silane Networks and Their Pyrolyzed Derivatives as Electrode Materials for the Electrocatalytic Oxygen Reduction Reaction and Supercapacitors

We report the synthesis of iminium-bridged resorcinol-silane (I-R-S) gel networks through the reaction of resorcinol with 3-aminopropyl triethoxysilane (APTES) in the presence of acetone under ambient conditions. Ambient pressure drying leads to monolithic gels with minimal shrinkage and cracks, eliminating the use of conventional supercritical drying. The gels were found to have bulk and skeletal densities of 0.90 and 1.23 g/cm³, respectively. Interestingly, it was found that acetone plays the dual role of solvent (solubilizing the precursors, APTES, and resorcinol) and reactant by reacting with amine present in APTES to form imine functionalities. Furthermore, the imine was found to react with resorcinol to form I-R-S gel networks. The I-R-S gel was found to be hydrophobic with a contact angle of between 99 and 103°. Upon pyrolysis at higher temperatures (600, 800, and 1000 °C), the I-R-S gels transformed to silica containing N-doped carbon as confirmed by X-ray photoelectron spectroscopy (XPS). Further removal of silica by hydrofluoric acid (HF) treatment lead to porous N-doped carbon which was found to effectively electrocatalyze the oxygen reduction reaction (ORR) by mixed 3e^- pathway. Note that the sample pyrolyzed at 600 °C followed by treatment with HF displayed an ∼2e^- pathway with a higher peroxide yield of 91%. Due to the high specific surface area and increased microporosity, the pyrolyzed samples treated with HF were found to exhibit a specific capacitance of 213 F/g with capacity retention of 90% for up to 2100 cycles.

Modulating the Band Structure of Metal Coordinated Salen COFs and an In Situ Constructed Charge Transfer Heterostructure for Electrocatalysis Hydrogen Evolution

A series of crystalline, stable Metal (Metal = Zn, Cu, Ni, Co, Fe, and Mn)-Salen covalent organic framework (COF)_EDA complex are prepared to continuously tune the band structure of Metal-Salen COF_EDA , with the purpose of optimizing the free energy intermediate species during the hydrogen evolution reaction (HER) process. The conductive macromolecular poly(3,4-ethylenedioxythiophene) (PEDOT) is subsequently integrated into the one-dimensional (1D) channel arrays of Metal-Salen COF_EDA to form heterostructure PEDOT@Metal-Salen COF_EDA via the in situ solid-state polymerization method. Among the Metal-Salen COF_EDA and PEDOT@Metal-Salen COF_EDA complexes, the optimized PEDOT@Mn-Salen COF_EDA displays prominent electrochemical activity with an overpotential of 150 mV and a Tafel slope of 43 mV dec^-1 . The experimental results and density of states data show that the continuous energy band structure modulation in Metal-Salen COF_EDA has the ability to make the metal d-orbital interact better with the s-orbital of H, which is conducive to electron transport in the HER process. Moreover, the calculated charge density difference indicates that the heterostructures composed of PEDOT and Metal-Salen COF_EDA induce an intramolecular charge transfer and construct highly active interfacial sites.

Rational Construction of Yolk-Shell Bimetal-Modified Quinonyl-Rich Covalent Organic Polymers with Ultralong Lithium-Storage Mechanism

Covalent organic polymers are attracting more and more attention for energy storage devices due to their lightweight, molecular viable design, stable structure, and environmental benignity. However, low charge-carrier mobility of pristine covalent organic materials is the main drawback for their application in lithium-ion batteries. Herein, a yolk-shell bimetal-modified quinonyl-rich covalent organic material, Co@2AQ-MnO₂, has been designed and synthesized by in situ loading of petal-like nanosized MnO₂ and coordinating with Co centers, with the aim to improve the charge conductivity of the covalent organic polymer and activate its Li-storage sites. As investigated by in situ FT-IR, ex situ XPS, and electrochemical probing, the quinonyl-rich structure provides abundant redox sites (carbonyl groups and π electrons from the benzene ring) for lithium reaction, and the introduction of two types of metallic species promotes the charge transfer and facilitates more efficient usage of active energy-storage sites in Co@2AQ-MnO₂. Thus, the Co@2AQ-MnO₂ electrode exhibits good cycling performance with large reversible capacity and excellent rate performance (1534.4 mA h g^-1 after 200 cycles at 100 mA g^-1 and 596.0 mA h g^-1 after 1000 cycles at 1000 mA g^-1).

Redox Targeting of Energy Materials for Energy Storage and Conversion

The redox-targeting (RT) process or redox-mediated process, which provides great operation flexibility in circumventing the constraints intrinsically posed by the conventional electrochemical systems, is intriguing for various energy storage and conversion applications. Implementation of the RT reactions in redox-flow cells, which involves a close-loop electrochemical-chemical cycle between an electrolyte-borne redox mediator and an energy storage or conversion material, not only boosts the energy density of flow battery system, but also offers a versatile research platform applied to a wide variety of chemistries for different applications. Here, the recent progress of RT-based energy storage and conversion systems is summarized and great versatility of RT processes for various energy-related applications is demonstrated, particularly for large-scale energy storage, spatially decoupled water electrolysis, electrolytic N₂ reduction, thermal-to-electrical conversion, spent battery material recycling, and more. The working principle, materials aspects, and factors dictating the operation are highlighted to reveal the critical roles of RT reactions for each application. In addition, the challenges lying ahead for deployment are stated and recommendations for addressing these constraints are provided. It is anticipated that the RT concept of energy materials will provide important implications and eventually offer a credible solution for advanced large-scale energy storage and conversion.

Ultrafast Synthesis of Layered Transition-Metal Oxide Cathodes from Metal-Organic Frameworks for High-Capacity Sodium-Ion Batteries

Layered transition-metal oxides are promising candidate cathode materials for sodium-ion batteries due to their abundant raw materials and high theoretical capacity. Nevertheless, a long-time high-temperature heat treatment is required in traditional preparation methods, leading to low synthesis efficiency and waste of energy. Herein, an ultrafast preparation method of layered transition-metal oxides was proposed through minute calcination of metal-organic frameworks (MOFs). The homogeneous distribution of different atoms in MOFs allows fast phase transition during the calcination process. P'2-phase layered sodium manganese oxide was successfully obtained and demonstrated excellent electrochemical performance, with a high reversible capacity of 212 mA h g^-1 and a cycling performance of 84% capacity retention after 100 cycles. Furthermore, this method can be expanded to a wide variety of MOF precursors and oxide electrode materials for different types of batteries. Our findings provide an efficient and cost-effective synthesis method for high-performance layered transition-metal oxide cathodes.

Metal-Organic Framework-Based Materials for Aqueous Zinc-Ion Batteries: Energy Storage Mechanism and Function

Aqueous rechargeable zinc-ion batteries (ZIBs) featuring competitive performance, low cost and high safety hold great promise for applications in grid-scale energy storage and portable electronic devices. Metal-organic frameworks (MOFs), relying on their large framework structure and abundant active sites, have been identified as promising materials in ZIBs. This review comprehensively presents the current development of MOF-based materials including MOFs and their derivatives in ZIBs, which begins with Zn storage mechanism of MOFs, followed by introduction of various types of MOF-based cathode materials (PB and PBA, Mn-based MOF, V-based MOF, conductive MOF and their derivatives), and the regulation approaches for Zn deposition behavior. The key factors and optimization strategies of MOF-based materials that affect ZIBs performance are emphasized and discussed. Finally, the challenges and further research directions of MOF-based materials for advanced zinc-ion batteries are provided.

Two-Dimensional Metal-Organic Framework Nanosheets: Synthesis and Applications in Electrocatalysis and Photocatalysis

Two-dimensional metal-organic nanosheets (2D MONs) are an emerging class of ultrathin, porous, and crystalline materials. The organic/inorganic hybrid nature offers MONs distinct advantages over other inorganic nanosheets in terms of diversity of organic ligands and metal notes. Compared to bulk three-dimensional metal-organic frameworks, 2D MONs possess merits of high density and readily accessible catalytic sites, reduced diffusion pathways for reactants/products, and fast electron transport. These features endow MONs with enhanced physical/chemical properties and are ideal for heterogeneous catalysis. In this Review, state-of-the-art synthetic methods for the fabrication of 2D MONs were summarized. The advances of 2D MONs-based materials for electrocatalysis and photocatalysis, including hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), carbon dioxide reduction reaction (CO₂ RR), and electro-/photocatalytic organic transformations were systematically discussed. Finally, the challenges and perspectives regarding future design and synthesis of 2D MONs for high-performance electrocatalysis and photocatalysis were provided.

Multifunctional Yolk-Shell Structured Magnetic Mesoporous Polydopamine/Carbon Microspheres for Photothermal Therapy and Heterogenous Catalysis

Yolk-shell structure with magnetic core, interior void and mesoporous polymer/carbon shell demonstrate potential applications in biocatalysis, magnetic biological separation, biomedicine, and magnetic resonance imaging due to their comprehensive benefits of magnetic and mesoporous shells. Herein, yolk-shell structured magnetic mesoporous polydopamine microspheres (Fe3O4@Void@mPDA) and the corresponding derivatives of carbon-based microspheres (Fe3O4@Void@mCN) are successfully fabricated through an interface assembly and selective etching approach. The obtained monodisperse Fe3O4@Void@mPDA microspheres consist of a magnetic core, a mesoporous polydopamine shell, and the large void formed between them, with perpendicular mesopores (5.2 nm), high surface area (303.3 m2g-1), and richness of functional groups. The Fe3O4@Void@mPDA microspheres show a remarkable inhibitory effect on tumor cells. Moreover, the Fe3O4@Void@mCN microspheres can immobilize ultrafine Au nanoparticles for hydrogenation of 4-nitrophenol with superb catalytic activity and excellent magnetic reusability.

Highly Effective OER Electrocatalysts Generated from a Two-Dimensional Metal-Organic Framework Including a Sulfur-Containing Linker without Doping

Metal-organic frameworks (MOFs) with different topologies formed by the self-assembly of sulfur-containing inorganic ligands, cobalt ions, and large ligands can be used to prepare electrocatalysts for water splitting in order to fully explore the advantages of MOFs in terms of structural tailoring and quantitative assembly. It is possible to avoid using an extradoped sulfur source to reduce waste as well as to disperse Co and sulfur elements evenly and controllably throughout the final material to maximize the overall synergistic effect. In this work, different kinds of bimetallic MOF materials containing sulfur can be synthesized very conveniently by using an economical and practical diffusion method. These materials are directly used as OER electrocatalysts, and the bimetallic MOFs have the best electrocatalytic performance when the ratio of Co to Fe is 6:4. The overpotential at a current density of 10 mA cm^-2 was 260 mV, with a Tafel slope of 56 mV dec^-1 and good stability. It was assembled with 20% commercial Pt/C material into a two-electrode system for all-water decomposition, and the decomposition voltage at 10 mA cm^-2 was 1.81 V. From the electronic configuration microscopic point of view, the introduction of iron ions changed the original synergistic effect for Co-S-Co, which more easily led to the formation of high-valence Co³⁺ and finally produced highly active electrocatalytic sites. From a macroscopic point of view, the material produced in situ during the electrochemical reaction process not only retains the original 2D layered structure but also utilizes bubbles to produce a loose structure with defective sites. These structural features are advantageous because they provide not only an abundance of active sites and permeable channels but also the necessary interfaces and electron-transport channels for the formation of electrostatic charge-separation layers, making it easier to intercalate and delaminate the hydroxide ions. Furthermore, the changed hydroxyl ions and nitrogen and sulfur atoms on the channel surface may operate as interaction sites, increasing the surface characteristics, facilitating electron transfer, and reducing electron-transfer resistance. To summarize, the rational design of sulfur-containing layered MOF materials directly as water-splitting catalysts is a crucial next step in developing cost-effective, environmentally friendly, and low-energy-consumption electrocatalysts based on the findings of this study.