Understanding the cation exchange affinity in modified-MMT catalysts for the conversion of glucose to lactic acid

This study investigated the exchange affinity of Fe3+, Cu2+, and Zn2+ cations in sulfuric acid-purified montmorillonite (S-MMT) to enhance Lewis acid sites and subsequently improve the catalytic conversion of glucose to lactic acid. XRD analysis suggested the successful cation exchange process, leading to structural expansion of the resultant cation exchanged-MMTs (CE-MMTs). XRF and TGA indicated that Zn2+ had the highest exchange affinity, followed by Cu2+ and then Fe3+. This finding was further supported by the results of TPD-NH3 analysis and pyridine-adsorption test, which demonstrated that Zn-MMT had the highest total acid sites (TAS) and the ratio of Lewis acid-to-Brønsted acid surface site (LA/BA). These results indicated dominant presence of Lewis acid sites in Zn-MMT due to the higher amount of exchanged Zn2+ cations. Consistently, time-dependent catalytic studies conducted at 170 °C showed that a 7 h-reaction generated the highest lactic acid yield, with the catalytic performance increasing in the order of Fe-MMT < Cu-MMT < Zn-MMT. The study also observed the impact of adding alcohols as co-solvents with water at various ratios on the conversion of glucose to lactic acid catalysed by Zn-MMT. The addition of ethanol enhanced lactic acid yield, while methanol and propanol inhibited lactic acid formation. Notably, a water-to-ethanol ratio of 30 : 70 v/v% emerged as the optimal solvent condition, resulting in ca. 35 wt% higher lactic acid yield compared to using water alone. Overall, this study provides valuable insights into the cation exchange affinity of different cations in MMT catalysts and their relevance to the conversion of glucose to lactic acid. Furthermore, the incorporation of alcohol co-solvent presents a promising way of enhancing the catalytic activity of CE-MMTs.

Tuning the Acid-Base Properties of Lignin-Derived Carbon Modulated ZnZr/SiO2 Catalysts for Selective and Efficient Production of Butadiene from Ethanol

The direct selective conversion of ethanol to butadiene (ETB) is a competitive and environmentally friendly process compared to the traditional crude cracking route. The acid-base properties of catalysts are crucial for the direct ETB process. Herein, we report a rationally designed multifunctional lignin-derived carbon-modulated ZnZr/SiO2 (L-ZnZr/SiO2) catalyst with suitable acid-base properties for the direct ETB reaction. A variety of characterization techniques are employed to investigate the relationship between the acid-base properties and catalytic performance of the multifunctional lignin-modulated ZnZr/SiO2 catalysts. The results revealed that the rationally additional lignin-modulated carbon enhances both the acidity and basicity of the ZnZr/SiO2 catalysts, providing a suitable acid-base ratio that boosts the direct ETB reactivity. Meanwhile, the 1% L-ZnZr/SiO2 catalyst possessed ethanol conversion and butadiene selectivity as high as 98.4% and 55.5%, respectively, and exhibited excellent catalytic stability.

Selective direct conversion of aqueous ethanol into butadiene via rational design of multifunctional catalysts

The highly efficient multifunctional 3% Y–Zn0.02Zr0.02/Si-beta catalyst possessed superior butadiene selectivity and ethanol conversion in direct conversion of aqueous ethanol into butadiene.

Fabrication of Zn-MOF/ZnO nanocomposites for room temperature H2S removal: Adsorption, regeneration, and mechanism

Zn-MOF/ZnO nanocomposites with different organic linkers were fabricated by a rapid ultrasonication method using freshly prepared Zn(OH)₂ precipitate. The high metal-to-ligand ratio led to the simultaneous formation of MOFs and ZnO nanoparticles in the MOFs. The surface area was in the range of 12-21 m² g^-1. The nanocomposites were tested for H₂S adsorption at room temperature, where the maximum adsorption capacity of 14.2 mg g^-1 was recorded for ZnBTC/ZnO in dry conditions. The spent adsorbents were regenerated using methanol and UV irradiation as individual and combined strategies. The successive effect of methanol and UV radiation led to an increased adsorption capacity in the second cycle. The spectroscopic investigation of spent ZnBDC/ZnO confirmed the chemisorption of H₂S over Zn-sites via Zn²⁺-S^2- interaction. The XPS analysis of regenerated ZnBDC/ZnO confirmed a decreased sulfur content and decreased Zn ionic character. The regeneration work in this study is one of the first attempts and could be extrapolated to well-studied Zn-MOFs like MOF-5 for the desulfurization process.

Insights into the synergistic effect of active centers over ZnMg/SBA-15 catalysts in direct synthesis of butadiene from ethanol

Functionalized catalysts with multiple active centers have been studied for direct conversion of ethanol to butadiene (ETB).

In situ Near-Ambient Pressure X-ray Photoelectron Spectroscopy Reveals the Influence of Photon Flux and Water on the Stability of Halide Perovskite

For several years, scientists have been trying to understand the mechanisms that reduce the long-term stability of perovskite solar cells. In this work, we examined the effect of water and photon flux on the stability of CH3 NH3 PbI3 perovskite films and solar cells using in situ near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS), field emission scanning electron microscopy (FESEM), and current density-voltage (J-V) characterization. The used amount of water vapor (up to 1 mbar) had a negligible impact on the perovskite film. The higher the photon flux, the more prominent were the changes in the NAP-XPS and FESEM data; also, a faster decline in power conversion efficiency (PCE) and a more substantial hysteresis in the J-V characteristics were observed. Based on our results, it can be concluded that the PCE decrease originates from the creation of Frenkel pair defects in the perovskite film under illumination. The stronger the illumination, the higher the number of Frenkel defects, leading to a faster PCE decline and more substantial hysteresis in the J-V sweeps.

Fundamental roles of ZnO and ZrO2 in the conversion of ethanol to 1,3-butadiene over ZnO–ZrO2/SiO2

ZnO and ZrO₂ sites in the ZnO–ZrO₂/SiO₂ catalyst act cooperatively to catalyze different steps of the conversion of ethanol to 1,3-butadiene.