One-pot redox cascade paired electrosynthesis of gamma-butyrolactone from furoic acid

The catalytic valorisation of biomass to afford synthetically useful small molecules is essential for sustainable biorefinery processes. Herein, we present a mild cascaded electrochemical protocol for converting furoic acid, a common biomass-derived feedstock, into a versatile platform chemical, gamma-butyrolactone. In the platinum(+)|nickel(-) electrode paired undivided cell, furoic acid is electrochemically oxidised with 84.2% selectivity to 2(5H)-furanone, the olefin of which is then hydrogenated to yield gamma-butyrolactone with 98.5% selectivity. The final gamma-butyrolactone yield is 69.1% with 38.3% Faradaic efficiency and 80.1% carbon balance when the reaction is performed with 100 mM furoic acid at 80 °C at +2.0 VAg/AgCl. Mechanistic investigation revealed the critical temperature and electrolyte pH conditions that maximise the production and protection of the key intermediate, furan radical, promoting its transition to 2(5H)-furanone rather than self-polymerising. The reaction is scalable, as 2.1 g of 98.1% pure gamma-butyrolactone is isolated through a simple solvent extraction.

Morphology-Engineering Construction of Anti-Aggregated Co/N-Doped Hollow Carbon from Metal-Organic Frameworks for Efficient Biomass Upgrading

The controlled pyrolysis of metal/carbon-containing precursors is commonly used for fabricating multifunctional metal/carbon-based catalysts, nevertheless, the inevitable agglomeration of these precursors in pyrolysis is extremely negative for efficient catalysis. This study reports the first example of suppressing the interfacial fusion and agglomeration of metal/carbon-based catalyst in its pyrolysis-involved fabrication process by developing a facile morphology-engineering strategy. Metal-organic framework precursors are chosen as a proof of concept and five Co/N-doped hollow carbons with different morphologies (rhombic dodecahedron, cube, plate, interpenetration twin, and rod) are synthesized via the pyrolysis of their corresponding core-shell ZIF-8@ZIF-67 precursors. It is demonstrated that the interpenetration twin precursor shows the minimum interfacial contact of interparticles due to its partly-concave morphology with abundant facets, which endows it with the best resistibility from interfacial fusion and thus aggregation of interparticles during pyrolysis. Benefiting from its unique anti-aggregated structure with high specific surface area, abundant fully-exposed active sites, and good dispersibility, the resultant 36-facet Co/N-doped hollow carbon exhibit remarkably improved catalytic property for biomass upgrading as compared with its aggregated counterparts. This study highlights the crucial role of engineering morphology to prevent metal/carbon-containing precursors from detrimental agglomeration during pyrolysis, demonstrating a new approach to constructing anti-aggregated metal/carbon-based catalysts.

Recent advances in the conversion of furfural into bio-chemicals through chemo- and bio-catalysis

Furfural is a promising renewable platform molecule derived from hemi-cellulose, which can be further converted to fossil fuel alternatives and valuable chemicals due to its highly functionalized molecular structure. This mini-review summarizes the recent progress in the chemo-catalytic and/or bio-catalytic conversion of furfural into high-value-added chemicals, including furfurylamine, C₆ carboxylic acid, i.e., furandicarboxylic acid, furfural alcohol, aromatics, levulinic acid, maleic acid, succinic acid, furoic acid, and cyclopentanone, particularly the advances in the catalytic valorization of furfural into useful chemicals in the last few years. The possible reaction mechanisms for the conversion of furfural into bio-chemicals are summarized and discussed. The future prospective and challenges in the utilization of furfural through chemo- and bio-catalysis are also put forward for the further design and optimization of catalytic processes for the conversion of furfural.

One-dimensional nitrogen doped porous carbon nano-array arranged by carbon nanotubes for electrochemical sensing ascorbic acid, dopamine and uric acid simultaneously

In this work, one-dimensional nitrogen doped porous carbon nano-arrays arranged by carbon nanotube (1D CNTs@NPC) were first constructed, using a coating technology at room temperature and followed by high temperature carbonization. It was expected that the resulting glassy carbon electrodes modified by 1D CNTs@NPC (CNTs@NPC/GCE) could express different electrochemical responses to ascorbic acid (AA), dopamine (DA), uric acid (UA), by virtue of the synergistic-improved effect between CNTs and NPC. Under the optimized conditions, there were excellent analytical parameters for CNTs@NPC/GCE to detect AA, DA and UA, i.e. a wide linear range of 40-2100μM for AA, 0.5-49μM for DA and 3-50μM for AA with low detection limits of 0.36μM, 0.02μmol l^-1and 0.57μM respectively. Importantly, the proposed CNTs@NPC/GCE was efficiently applied to determine AA, DA and UA in some real samples with high stability, reproducibility and selectivity. This work will offer an efficient potential for diagnosing ascorbic acid, dopamine or uric acid-related diseases on clinical testing in future.

Quantum Mechanical Calculations for Biomass Valorization over Metal-Organic Frameworks (MOFs)

Metal-organic framework (MOF) in biomass valorization is a promising technology developed in recent decades. By tailoring both the metal nodes and organic ligands, MOFs exhibit multiple functionalities, which not only extend their applicability in biomass conversion but also increase the complexity of material designs. To address this issue, quantum mechanical simulations have been used to provide mechanistic insights into the catalysis of biomass-derived molecules, which could potentially facilitate the development of novel MOF-based materials for biomass valorization. The aim of this review is to survey recent quantum mechanical simulations on biomass reactions occurring in MOF catalysts, with the emphasis on the studies of the catalytic activity of active sites and the effects of organic ligand and porous structures on the kinetics. Moreover, different model systems and computational methods used for MOF simulations are also surveyed and discussed in this review.

Optimisation of glucose and levulinic acid production from the cellulose fraction of giant reed (Arundo donax L.) performed in the presence of ferric chloride under microwave heating

A two-step exploitation of the giant reed cellulose to glucose and levulinic acid, after the complete removal of the hemicellulose fraction, was investigated using FeCl₃ as catalyst. In the first step, the microwave-assisted hydrolysis of cellulose to glucose was optimised by response surface methodology analysis, considering the effect of temperature, reaction time and catalyst amount. Under the optimised reaction conditions, the glucose yield was 39.9 mol%. The cellulose-rich residue was also converted by enzymatic hydrolysis, achieving the glucose yield of 39.8 mol%. The exhausted residue deriving from the chemical hydrolysis was further converted to levulinic acid by microwave treatment at harsher reaction conditions. The maximum levulinic acid yield was 64.3 mol%. On the whole, this cascade approach ensured an extensive and sustainable exploitation of the C6 carbohydrates to glucose and levulinic acid, corresponding to about 70 mol% of glucan converted to these valuable bioproducts in the two steps.