Polyoxometalate-based nanozyme with laccase-mimicking activity for kanamycin detection based on colorimetric assay

As a kind of aminoglycoside antibiotics, kanamycin (KAN) is widely applied to animal husbandry and aquaculture. However, the abuse of KAN causes the large-scale discharge of it into rivers, lakes and groundwater, which threatens environmental safety and human health. Therefore, it is imperative to develop a method that is applicable to detect KAN in an efficient and accurate way. The colorimetric method based on enzymes provides a feasible solution for the detection of organic pollutants. However, the extensive application of natural enzymes is constrained by high cost and low stability. Herein, a polyoxometalate-based nanozyme, namely [H7SiW9V3O40(DPA)3]·4H2O (SiW9V3/DPA) (DPA = dipyridylamine), is synthesized. As a low-cost nanozyme with high stability compared to natural enzymes, SiW9V3/DPA performs well in laccase-mimicking activity. It can be used to induce chromogenic reaction between 2,4-dichlorophenol (2,4-DP) and 4-aminoantipyrine (4-AP), which generates red products. With the addition of KAN, the color fades. That is to say, KAN can be detected with colorimetric assay in the concentration range 0.1 to 100 μM with high selectivity and low limit of detection (LOD) of 6.28 μM. Moreover, SiW9V3/DPA is applied to KAN detection in lake and river water and milk with satisfactory results. To sum up, polyoxometalate-based nanozyme is expected to provide a promising solution to the detection of organic pollutants in the aquatic environment.

A novel MOF-808 derived material for oxidative desulfurization: the synergistic effect of hydrophobicity and electron transfer

A functionalized modified metal-organic framework material, T-MOF-808, was synthesized through hydrophobic modification with tetraethyl orthosilicate (TEOS) and chlorotrimethylsilane (TMCS). Then a supported oxidative desulfurization catalyst, [C12Py]3(NH4)3Mo7O24/T-MOF-808(s), was prepared by using a heteropoly acid ionic liquid as the active component. The prepared samples were characterized using FT-IR, XRD, SEM, TEM, XPS, etc. [C12Py]3(NH4)3Mo7O24/T-MOF-808(s) was used in the oxidative desulfurization of dibenzothiophene (DBT). At the same time, the effects of different loadings of the active component, oxygen sulfur ratios, reaction temperatures, and reaction time were also investigated. [C12Py]3(NH4)3Mo7O24/T-MOF-808-15%(s) could oxidize 100% of DBT in 40 min at 60 °C. Significantly, the catalyst exhibited no discernible decline in catalytic activity after 14 runs. In addition, the efficiency of sulfur removal was 85.76% in actual diesel oil. It was found that the cooperative impact of hydrophobic modification and electron transfer makes an important contribution to the high activity. The hydrophobic modification provides a novel approach for using MOF materials in the oxidative desulfurization process.

Investigating catalytic oxidative desulfurization of model fuel using hollow PW12/TiO2@MgCO3 and performance optimization via box-behnken design

A facile and eco-friendly synthesis of PW12/TiO2@MgCO3 hollow tubes (PW12·∼· H3[PW12O40] = polyoxometalate) using a soluble and reusable MgCO3·3H2O micro-rods template was reported for the first time. The resultant hollow tubes were characterized by Fourier transform infrared spectroscopy (FT-IR), UV-visible spectroscopy, powder X-ray diffraction (PXRD), energy-dispersive X-ray spectroscopy (EDX), and scanning electron microscopy (SEM), which indicated that the [PW12O40]3- structure remained intact within the hollow tubes. Furthermore, the specific surface area (88.982 m2/g) and average pore size (2.6 nm) of the PW12/TiO2@MgCO3 hollow tubes were calculated using the Brunauer-Emmett-Teller (BET) analysis. This study explored the catalytic performance of PW12/TiO2@MgCO3 hollow tubes using a three-level Box-Behnken design (BBD), through which optimization curves were designed. The desulfurization of model fuel using hollow tubes was optimally performed when the catalyst dose, time, temperature, and oxidant/sulfur (O/S) were 20-80 gm, 80-120 min, 25-80 °C and 3-8 molar ratio, respectively. These results were further processed, and the experiments were replicated twenty-nine times using a model based on two quadratic polynomials to create a response surface methodology (RSM). This permits a mathematical correlation linking the desulfurization and experimental parameters. The optimal performance of reaction mixture was evaluated to be 80 mg for catalyst concentration, 25 °C of temperature, reaction time of 100 min, and 5.5 for oxidant/sulfur molar ratio from 20 mL of octane simulation oil containing 350 ppm dibenzothiophene (DBT). The predicted desulfurization rate of the model fuel under these optimal conditions was 95.3%. The correspondence between the experimental results and predicted values was verified based on regression analysis, with an R2 value greater than 0.99. These hollow tubes could be used for their desulfurization properties ten times a row without significantly reducing catalytic activity.

Ultrafast oxidative desulfurization of diesel fuel catalyzed by a polyoxometalate-based catalyst immobilized on functionalized Y-SBA-15

Y-SBA-15 was synthesized by doping yttrium (Y) into SBA-15 using a solvent-free solid-state grinding method, and 1-butyl-3-methylimidazolium phosphomolybdic salt ([Bmim]₃PMo₁₂O₄₀, abbreviated as [Bmim]PMoO) was also synthesized. [Bmim]PMoO/Y-SBA-15 was prepared and used for oxidative desulfurization (ODS). The physicochemical characteristics of the catalyst have been characterized by FT-IR, XRD, N₂ adsorption-desorption, FESEM, TEM, XPS, contact angle testing, EPR, etc. A lipophilic surface is beneficial for making the catalyst well disperse in an oil phase, and a hydrophilic core can help to store aqueous oxidants. Therefore, the amphiphilic catalyst 25[Bmim]PMoO/10Y-SBA-15 exhibited high catalytic activity in dibenzothiophene (DBT) ODS, and sulfur compounds can be removed completely within 40 min under the following conditions: V_Oil = 10 mL, m_catalyst = 0.1 g, m_[Bmim]PMoO : m_{[Bmim]PMoO/10Y-SBA-15} = 25%, and O/S = 4 (molar ratio). In addition, the concentration of aromatics exerted little effect on the DBT ODS. Sulfur compounds in real diesel might be reduced to 8 μg g^-1. The hydroxyl radical ˙OH and superoxide radical ˙O₂^- play crucial roles in the ODS reaction, and the ODS reaction mechanism was also proposed.

Calcined ZnTi-Layered Double Hydroxide Intercalated with H3 PW12 O40 with Efficiently Photocatalytic and Adsorption Performances

Wastewater treatment is of great significance to environmental remediation. The exploration of efficient and stable methods for wastewater treatment is still a challenging issue. Herein, a heterojunction material with photocatalysis and adsorption properties has been designed to remove the complex pollutants from wastewater. The heterojunction material (ZnO/TiO₂ -PW₁₂ , PW₁₂ =[PW₁₂ O₄₀ ]^3- ) was synthesized by calcining the ZnTi-layered double hydroxide (ZnTi-LDH) intercalated with the Keggin-type polyoxometalate H₃ PW₁₂ O₄₀ . In the construction of ZnO/TiO₂ -PW₁₂ it was found that the polyanionic PW₁₂ remained unchanged in the process of forming the proposed heterojunction. The photochemical properties verify that heterojunction synergistic with PW₁₂ facilitated the separation of photoproduced electron-hole pairs and thus suppressed the recombination. Therefore, ZnO/TiO₂ -PW₁₂ exhibits excellent photocatalytic property, and the efficiency of Cr(VI) photoreduction reached more than 90 % in the first 3 min. Furthermore, the electrostatic force between the PW₁₂ and cationic dyes makes ZnO/TiO₂ -PW₁₂ having an outstanding adsorption performance for cationic dyes, such as rhodamine B, crystal violet and methyl blue. Such heterojunction material combined with polyoxometalate puts forward new insights for the design of functional materials for water treatment with low cost and high efficiency.

A {Ti6W4}-Cluster-Substituted Polyoxotungstate: Synthesis, Structure, and Catalytic Oxidation Properties

A novel Ti-W-O-cluster-substituted tungstoantimonate (TA), [H₂N(CH₃)₂]₃Na₄H₉[{Ti₆W₄O₁₈(OH)(H₂O)₃}(B-α-SbW₉O₃₃)₃]·20H₂O (1), has been made by hydrothermal reactions of trivacant [B-α-SbW₉O₃₃]^9- units, Ti⁴⁺ cations, and WO₄^2- anions in the presence of [H₂N(CH₃)₂]·Cl and structurally characterized. Intriguingly, the polyoxoanion of 1 is constructed from three [B-α-SbW₉O₃₃]^9- units and a previously unobserved decanuclear heterometallic Ti-W-O cluster [Ti₆W₄O₁₈(OH)(H₂O)₃]¹¹⁺ ({Ti₆W₄}) that is comprised of an octahedral [Ti₆WO₆(H₂O)₃]¹⁸⁺ cluster and an edge-sharing [W₃O₁₂(OH)]^7- fragment via six W-O-Ti/W linkers. Furthermore, studies on the catalytic oxidation properties reveal that 1 possesses good catalytic activity toward the oxidation reactions of various sulfides and cyclooctene based on the environmentally friendly oxidant H₂O₂.

Oxidative Desulfurization Catalyzed by Phosphotungstic Acid Supported on Hierarchical Porous Carbons

A hierarchical porous carbon material (HPC) with an ultra-high specific surface area was synthesized with sisal fiber (SF) as a precursor, and then H3PW12O40·24H2O (HPW) was immobilized on the support of SF-HPC by a simple impregnation method. A series characterization technology approved that the obtained SF-HPC had a high surface area of 3152.46 m2g-1 with micropores and macropores. HPW was well-dispersed on the surface of the SF-HPC support, which reduced the loading of HPW to as low as 5%. HPW/SF-HPW showed excellent catalytic performance for oxidative desulfurization, and the desulfurization rate reached almost 100% under the optimal reaction conditions. The desulfurization rate of HPW/SF-HPW could be maintained at above 94% after four recycles.

Assembly of polyoxometalate-thiacalix[4]arene-based inorganic-organic hybrids as efficient catalytic oxidation desulfurization catalysts

Self-assembly of polyoxometalates, Ni(ii)/Ag(i) cations and tetra-[5-(mercapto)-1-methyltetrazole]-thiacalix[4]arene (L) yielded three inorganic-organic hybrids, namely, [Ni₃L₂(CH₃OH)₆(H₂O)₄][PMo₁₂O₄₀]₂·3CH₃OH·2H₂O (1), [Ni₃L₂(CH₃OH)₆(H₂O)₄][PW₁₂O₄₀]₂·3CH₃OH·2H₂O (2) and [Ag₃L(PMo₁₂O₄₀)] (3). In hybrids (1) and (2), Ni(ii) cations are linked by L ligands to produce layered frameworks, and H bonds among the [PMo₁₂O₄₀]^3-/[PW₁₂O₄₀]^3- anions and L ligands lengthen the structures to form 3D supramolecular architectures. Hybrid (3) exhibits a 3D architecture, of which Ag(i) cations not only coordinated with the N and O atoms of L ligands and [PMo₁₂O₄₀]^3- anions simultaneously, but also connected each other by Ag-Ag interactions. It is worth mentioning that 1 and 3 as recyclable catalysts show excellent heterogeneous catalytic activity in oxidation desulfurization reactions.

Synthesis of mesoporous ZnO/TiO2-SiO2 composite material and its application in photocatalytic adsorption desulfurization without the addition of an extra oxidant

Photocatalytic adsorption desulfurization (PADS) technology has attracted enormous attention in the deep desulfurization field. Therefore, a good material with high photocatalytic activity and adsorption capacity toward organic sulfide is desirable. Herein, mesoporous ZnO/TiO2-SiO2 (ZTS) was synthesized for the first time and successfully applied in the photocatalytic desulfurization of dibenzothiophene (DBT). The composite materials were characterized by means of X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), N2-physisorption, transmission electron microscopy (TEM), UV-Vis diffusive reflectance spectra (UV-Vis DRS), X-ray photo-electron spectroscopy (XPS), photoluminescence (PL) and electron spin resonance (ESR). The results show that the doping of TiO2 promotes the photocatalytic and adsorption abilities of the catalysts dramatically. ZTS-3 with Si/Ti = 3 exhibits the best photocatalytic desulfurization activity compared with other proportions of titanium doping. The final DBT conversion can reach 97%, and the maximum adsorption of DBT over ZTS-3 is 47 mg-S per g-cat. The photocatalytic test indicates that the remarkable photocatalytic activity of ZTS is due to the formation of a heterojunction by the interaction of ZnO and TiO2, which can successfully expand solar light absorption, improving the charge separation efficiency and inhibiting the recombination of photocatalytic electron-hole pairs. Moreover, no extra oxidants (such as O2, H2O2 or an organic oxidant) were added, which is highly beneficial for the consequent treatment of the fuel and can reduce the processing cost markedly.

Four Keggin-based compounds constructed by a series of pyridine derivatives: synthesis, and electrochemical, photocatalytic and fluorescence sensing properties

Four compounds based on Keggin anions and Ag^I ions were obtained, the photocatalytic and electrochemical properties were studied. Compound 4 can act as a Hg²⁺ fluorescence sensor.