Impact of Anchoring Groups on the Photocatalytic Performance of Iridium(III) Complexes and Their Toxicological Analysis

Three different iridium(III) complexes, labelled as Ir1-Ir3, each bearing a unique anchoring moiety (diethyl [2,2'-bipyridine]-4,4'-dicarboxylate, tetraethyl [2,2'-bipyridine]-4,4'-diylbis(phosphonate), or [2,2'-biquinoline]-4,4'-dicarboxylic acid), were synthesized to serve as photosensitizers. Their electrochemical and photophysical characteristics were systematically investigated. ERP measurements were employed to elucidate the impact of the anchoring groups on the photocatalytic hydrogen generation performance of the complexes. The novel iridium(III) complexes were integrated with platinized TiO2 (Pt-TiO2) nanoparticles and tested for their ability to catalyze hydrogen production under visible light. A H2 turnover number (TON) of up to 3670 was obtained upon irradiation for 120 h. The complexes with tetraethyl [2,2'-bipyridine]-4,4'-diylbis(phosphonate) anchoring groups were found to outperform those bearing other moieties, which may be one of the important steps in the development of high-efficiency iridium(III) photosensitizers for hydrogen generation by water splitting. Additionally, toxicological analyses found no significant difference in the toxicity to luminescent bacteria of any of the present iridium(III) complexes compared with that of TiO2, which implies that the complexes investigated in this study do not pose a high risk to the aquatic environment compared to TiO2.

Aqueous emissive cyclometalated iridium photoreductants: synthesis, computational analysis and the photocatalytic reduction of 4-nitrophenol

Herein, we present luminescent mononuclear iridium complexes [1]3+-[4]3+ using NEt3-appended C^N chelating benzimidazole (L1-L4) and semi-flexible phenanthroline-pyrazine-based (phpy) ligands exhibiting photocatalytic reduction of 4-nitrophenol (4-NP) in the presence of NEt3 in an aqueous medium. The formation of [1]3+-[4]3+ was confirmed by HRMS, 1H-1H COSY, and 13C and 19F NMR spectroscopy. The complex [4]3+ is water soluble, whereas the others ([1]3+-[3]3+) are partially soluble. The complexes are luminescent in both CH3CN and H2O media. The DFT study reveals that the HOMO of [1]3+ resides on the C^N chelating benzimidazole and iridium center. However, it moves to the pyrazine-pyridine of the phpy unit in the case of [2]3+-[4]3+. The LUMOs are localized on the phenanthroline unit of phpy for all the complexes. This suggests an important role of the fluorine atom on electron density distribution. Spin density analysis demonstrates that the emission bands of the complexes arise from 3MLLCT states. The complex [4]3+ displays promising photocatalytic activity towards 4-NP photoreduction, whereas complexes [1]3+-[3]3+ exhibit lower reactivity. The mechanistic study suggests that the reaction proceeds through an oxidative quenching pathway, where 4-NP is reduced by accepting an electron from excited [Ir(III)] and gets oxidized to Ir(IV), which comes back to its original Ir(III) state by accepting an electron from the sacrificial electron donor NEt3.

Poly(dehydroalanine)-Based Hydrogels as Efficient Soft Matter Matrices for Light-Driven Catalysis

Soft matter integration of photosensitizers and catalysts provides promising solutions to developing sustainable materials for energy conversion. Particularly, hydrogels bring unique benefits, such as spatial control and 3D-accessibility of molecular units, as well as recyclability. Herein, the preparation of polyampholyte hydrogels based on poly(dehydroalanine) (PDha) is reported. Chemically crosslinked PDha with bis-epoxy poly(ethylene glycol) leads to a transparent, self-supporting hydrogel. Due to the ionizable groups on PDha, this 3D polymeric matrix can be anionic, cationic, or zwitterionic depending on the pH value, and its high density of dynamic charges has a potential for electrostatic attachment of charged molecules. The integration of the cationic molecular photosensitizer [Ru(bpy)3 ]2+ (bpy = 2,2'-bipyridine) is realized, which is a reversible process controlled by pH, leading to light harvesting hydrogels. They are further combined with either a thiomolybdate catalyst ([Mo3 S13 ]2- ) for hydrogen evolution reaction (HER) or a cobalt polyoxometalate catalyst (Co4 POM = [Co4 (H2 O)2 (PW9 O34 )2 ]10- ) for oxygen evolution reaction (OER). Under the optimized condition, the resulting hydrogels show catalytic activity in both cases upon visible light irradiation. In the case of OER, higher photosensitizer stability is observed compared to homogeneous systems, as the polymer environment seems to influence decomposition pathways.

Hydroxypyridinate-bridged paddlewheel-type dirhodium complex as a catalyst for photochemical and electrochemical hydrogen evolution

Electrochemical and photochemical hydrogen (H2) evolution activities of a 6-fluoro-2-hydroxypyridinate (fhp-)-bridged paddlewheel-type dirhodium (Rh2) complex, [Rh2(fhp)4], were investigated through experimental and theoretical approaches. In DMF, the [Rh2(fhp)4] underwent a one-electron reduction (assigned to Rh24+/3+) at -1.31 V vs SCE in the cathodic region. Adding trifluoroacetic acid as a proton source to the electrochemical cell containing [Rh2(fhp)4], the significant catalytic current, i.e., electrochemical H2 evolution, was observed; the turnover frequency and overpotential of electrochemical H2 evolution were 18 244 s-1 and 732 mV, respectively. The reaction mechanism of electrochemical H2 evolution catalyzed by [Rh2(fhp)4] in DMF was examined in detail by theoretically predicting the redox potentials and pKa values of the reaction intermediates using density functional theory calculations. The calculations revealed that (i) the formation of a one-electron reduced species, [Rh2(fhp)4]-, triggered for H2 evolution and (ii) the protonation and reduction processes of [Rh2(fhp)4]- to further reduced hydride intermediates proceeded directly via a concerted proton-electron transfer mechanism. Moreover, [Rh2(fhp)4] was shown to be a highly efficient H2 evolution catalyst (HEC) for photochemical proton reduction reactions when combined with an artificial photosynthetic (AP) system containing [Ir(ppy)2(dtbbpy)]PF6 and triethylamine, which served as a photosensitizer and a sacrificial electron donor, respectively. Under visible light irradiation, the total amount of H2 evolved and its turnover number (per Rh ion) were 1361.0 µmol and 13 610, respectively, which are superior to those of previously reported AP systems with rhodium complexes as HEC.

Light-induced electron transfer/phase migration of a redox mediator for photocatalytic C-C coupling in a biphasic solution

Photocatalytic molecular conversions that lead to value-added chemicals are of considerable interest. To achieve highly efficient photocatalytic reactions, it is equally important as it is challenging to construct systems that enable effective charge separation. Here, we demonstrate that the rational construction of a biphasic solution system with a ferrocenium/ferrocene (Fc⁺/Fc) redox couple enables efficient photocatalysis by spatial charge separation using the liquid-liquid interface. In a single-phase system, exposure of a 1,2-dichloroethane (DCE) solution containing a Ru(II)- or Ir(III)-based photosensitizer, Fc, and benzyl bromide (Bn-Br) to visible-light irradiation failed to generate any product. However, the photolysis in a H₂O/DCE biphasic solution, where the compounds are initially distributed in the DCE phase, facilitated the reductive coupling of Bn-Br to dibenzyl (Bn₂) using Fc as an electron donor. The key result of this study is that Fc⁺, generated by photooxidation of Fc in the DCE phase, migrates to the aqueous phase due to the drastic change in its partition coefficient compared to that of Fc. This liquid-liquid phase migration of the mediator is essential for facilitating the reduction of Bn-Br in the DCE phase as it suppresses backward charge recombination. The co-existence of anions can further modify the driving force of phase migration of Fc⁺ depending on their hydrophilicity; the best photocatalytic activity was obtained with a turnover frequency of 79.5 h^-1 and a quantum efficiency of 0.2% for the formation of Bn₂ by adding NBu₄⁺Br^- to the biphasic solution. This study showcases a potential approach for rectifying electron transfer with suppressed charge recombination to achieve efficient photocatalysis.

Supramolecular chemistry in lipid bilayer membranes

Lipid bilayer membranes form compartments requisite for life. Interfacing supramolecular systems, including receptors, catalysts, signal transducers and ion transporters, enables the function of the membrane to be controlled in artificial and living cellular compartments. In this perspective, we take stock of the current state of the art of this rapidly expanding field, and discuss prospects for the future in both fundamental science and applications in biology and medicine.

Two Excited State Collaboration of Heteroleptic Ir(III)-Coumarin Complexes for H2 Evolution Dye-Sensitized Photocatalysts

Interfacial electron injection from a photoexcited surface-immobilized dye to a semiconductor substrate is a key reaction for dye-sensitized photocatalysts. We previously reported that the molecular orientation of heteroleptic Ir(III) photosensitizer on the TiO2 nanoparticle surface was important for efficient interfacial electron injection. In this work, to overcome the weak light absorption ability of heteroleptic Ir(III) photosensitizer and to improve the photoinduced charge-separation efficiency at the dye–semiconductor interface, we synthesized two heteroleptic Ir(III) complexes with different coumarin dyes, [Ir(C6)2(H4CPbpy)]Cl and [Ir(C30)2(H4CPbpy)]Cl [Ir-CX; X = 6 or 30; HC6 = 3-(2-enzothiazolyl)-7-(diethylamino)coumarin, HC30 = 3-(2-N-methylbenzimidazolyl)-7-N,N-diethylaminocoumarin, H4CPbpy = 4,4′-bis(methylphosphonic acid)-2,2′-bipyridine], as the cyclometalated ligands and immobilized them on the surface of Pt-cocatalyst-loaded TiO2 nanoparticles. Ultraviolet-visible absorption and emission spectroscopy revealed that the singlet ligand-centered (1LC) absorption and triplet 3LC emission bands of Ir-C30 occurred at shorter wavelengths than those of Ir-C6, while time-dependent density-functional-theory data suggested that the ligand-to-ligand charge transfer (LLCT) excited states of the two complexes were comparable. The photocatalytic H2 evolution activity of the Ir-C6-sensitized Pt-TiO2 nanoparticles (Ir-C6@Pt-TiO2) under visible light irradiation (λ > 420 nm) was higher than that of Ir-C30@Pt-TiO2. In contrast, their activities were comparable under irradiation with monochromatic light (λ = 450 ± 10 nm), which is absorbed comparably by both Ir-CX complexes. These results suggest that the internal conversion from the higher-lying LC state to the LLCT state effectively occurs in both Ir-CX complexes to trigger electron injection to TiO2.

Triplet Excited States Modulated by Push-Pull Substituents in Monocyclometalated Iridium(III) Photosensitizers

A series of novel monocyclometalated [Ir(tpy)(btp)Cl]⁺ complexes (Ir2-Ir5) were synthesized using 2,2':6',2″-terpyridine (tpy) and 2-(2-pyridyl)benzo[b]thiophene (btp) ligands, as well as their derivatives bearing electron-donating tert-butyl (t-Bu) and electron-withdrawing trifluoromethyl (CF₃) groups. Ir2-Ir5 exhibited visible-light absorption stronger than that of the known complex [Ir(tpy)(ppy)Cl]⁺ (Ir1; ppy = 2-phenylpyridine). Spectroscopic and computational studies revealed that two triplet states were involved in the excited-state dynamics. One is a weakly emissive and short-lived ligand to ligand charge-transfer (LLCT) state originating from the charge transfer from the btp to the tpy ligand. The other is a highly emissive and long-lived ligand-centered (LC) state localized on the btp ligand. Interestingly, the excited state dominant with ³LLCT was completely changed to the ³LC state upon the introduction of substituents on both the tpy and btp ligands. For instance, the excited state of the parent complex Ir2 was weakly emissive (Φ = 2%) and short-lived (τ = 110 ns) in CH₂Cl₂; conversely, Ir5, fully furnished with t-Bu and CF₃ groups, displayed intense phosphorescence with a prolonged lifetime (τ = 14 μs). This difference became increasingly prominent when the solvent was changed to aqueous CH₃CN, most probably due to the ³LLCT stabilization. The predominant excited-state nature was switchable between the ³LLCT and ³LC states depending on the substituents employed; this was demonstrated through investigations of Ir3 and Ir4, bearing either the t-Bu or the CF₃ group, where the complexes exhibited properties intermediate between those of Ir2 and Ir5. All of the Ir(III) complexes were tested as photosensitizers in photocatalytic H₂ evolution over a Co molecular catalyst, and Ir5 outperformed the others, including Ir1, due to improvement in the following key properties: visible-light-absorption ability, excited-state lifetime, and reductive power of the one-electron-reduced species against the catalyst.

Visualization and characterization of metallo-aggregates using multi-photon microscopy

A simple and cost-effective method based on multi-photon microscopy is presented for the preliminary screening of the general morphology, size range and heterogeneity of Ir(iii) nano-aggregate formulations.

Multi-photon microscopy can be an excellent complementary technique for the characterization of nano-aggregates containing metallic photosensitizers with multi-photon emission properties.