Biomass-Derived Carbon-Based Multicomponent Integration Catalysts for Electrochemical Water Splitting

Electrocatalytic water splitting powered by sustainable electricity is a crucial approach for the development of new generation green hydrogen technology. Biomass materials are abundant and renewable, and the application of catalysis can increase the value of some biomass waste and turn waste into fortune. Converting economical and resource-rich biomass into carbon-based multicomponent integrated catalysts (MICs) has been considered as one of the most promising ways to obtain inexpensive, renewable and sustainable electrocatalysts in recent years. In this review, recent advances in biomass-derived carbon-based MICs towards electrocatalytic water splitting are summarized, and the existing issues and key aspects in the development of these electrocatalysts are also discussed and prospected. The application of biomass-derived carbon-based materials will bring some new opportunities in the fields of energy, environment, and catalysis, as well as promote the commercialization of new nanocatalysts in the near future.

One-Step Synthesis of a Binder-Free, Stable, and High-Performance Electrode; Cu-O|Cu3P Heterostructure for the Electrocatalytic Methanol Oxidation Reaction (MOR)

Although direct methanol fuel cells (DMFCs) have been spotlighted in the past decade, their commercialization has been hampered by the poor efficiency of the methanol oxidation reaction (MOR) due to the unsatisfactory performance of currently available electrocatalysts. Herein, we developed a binder-free, copper-based, self-supported electrode consisting of a heterostructure of Cu₃P and mixed copper oxides, i.e., cuprous-cupric oxide (Cu-O), as a high-performance catalyst for the electro-oxidation of methanol. We synthesized a self-supported electrode composed of Cu-O|Cu₃P using a two-furnace atmospheric pressure-chemical vapor deposition (AP-CVD) process. High-resolution transmission electron microscopy analysis revealed the formation of 3D nanocrystals with defects and pores. Cu-O|Cu₃P outperformed the MOR activity of individual Cu₃P and Cu-O owing to the synergistic interaction between them. Cu₃P|Cu-O exhibited a highest anodic current density of 232.5 mAcm^-2 at the low potential of 0.65 V vs. Hg/HgO, which is impressive and superior to the electrocatalytic activity of its individual counterparts. The formation of defects, 3D morphology, and the synergistic effect between Cu₃P and Cu-O play a crucial role in facilitating the electron transport between electrode and electrolyte to obtain the optimal MOR activity. Cu-O|Cu₃P shows outstanding MOR stability for about 3600 s with 100% retention of the current density, which proves its robustness alongside CO intermediate.

Hollow Heterostructured Nanocatalysts for Boosting Electrocatalytic Water Splitting

The implementation of electrochemical water splitting demands the development and application of electrocatalysts to overcome sluggish reaction kinetics of hydrogen/oxygen evolution reaction (HER/OER). Hollow nanostructures, particularly for hollow heterostructured nanomaterials can provide multiple solutions to accelerate the HER/OER kinetics owing to their advantageous merit. Herein, the recent advances of hollow heterostructured nanocatalysts and their excellent performance for water splitting are systematically summarized. Starting by illustrating the intrinsically advantageous features of hollow heterostructures, achievements in engineering hollow heterostructured electrocatalysts are also highlighted with the focus on structural design, interfacial engineering, composition regulation, and catalytic evaluation. Finally, some perspective insights and future challenges of hollow heterostructured nanocatalysts for electrocatalytic water splitting are also discussed.

Introducing Te for boosting electrocatalytic reactions

The deployment of robust catalysts for electrochemical reactions is a critical topic for energy conversion techniques. Te-based nanomaterials have attracted increasing attention for their application in electrochemical reactions due to their positive influence on the electrocatalytic performance induced by their distinctive electronic and physicochemical properties. Herein, we have summarized the recent progress on Te-based nanocatalysts for electrocatalytic reactions by primarily focusing on the positive influence of Te on electrocatalysts. Firstly, Te-based nanomaterials can serve as an ideal template for the construction of well-defined nanostructures. Secondly, Te doping can significantly modify the electronic structure of the host catalyst, thereby, leading to the optimization of binding strength with intermediates. Furthermore, the Te etching strategy can also create a high density of surface defects, thereby leading to substantial improvement in the electrocatalytic performance. Additionally, many representative Te-based nanocatalysts for electrocatalytic reactions are also summarized and systematically discussed. Finally, a conclusive and perspective discussion is also provided to provide guidance for the future development of more efficient electrocatalysts.

In Situ Assembly of Well-Defined MoS2 Slabs on Shape-Tailored Anatase TiO2 Nanostructures: Heterojunctions Role in Phenol Photodegradation

MoS2/TiO2-based nanostructures have attracted extensive attention due to their high performance in many fields, including photocatalysis. In this contribution, MoS2 nanostructures were prepared via an in situ bottom-up approach at the surface of shape-controlled TiO2 nanoparticles (TiO2 nanosheets and bipyramids). Furthermore, a multi-technique approach by combining electron microscopy and spectroscopic methods was employed. More in detail, the morphology/structure and vibrational/optical properties of MoS2 slabs on TiO2 anatase bipyramidal nanoparticles, mainly exposing {101} facets, and on TiO2 anatase nanosheets exposing both {001} and {101} facets, still covered by MoS2, were compared. It was shown that unlike other widely used methods, the bottom-up approach enabled the atomic-level growth of well-defined MoS2 slabs on TiO2 nanostructures, thus aiming to achieve the most effective chemical interactions. In this regard, two kinds of synergistic heterojunctions, namely, crystal face heterojunctions between anatase TiO2 coexposed {101} and {001} facets and semiconductor heterojunctions between MoS2 and anatase TiO2 nanostructures, were considered to play a role in enhancing the photocatalytic activity, together with a proper ratio of (101), (001) coexposed surfaces.

Vanadium-Doped FeBP Microsphere Croissant for Significantly Enhanced Bi-Functional HER and OER Electrocatalyst

Ultra-fine hydrogen produced by electrochemical water splitting without carbon emission is a high-density energy carrier, which could gradually substitute the usage of traditional fossil fuels. The development of high-performance electrocatalysts at affordable costs is one of the major research priorities in order to achieve the large-scale implementation of a green hydrogen supply chain. In this work, the development of a vanadium-doped FeBP (V-FeBP) microsphere croissant (MSC) electrocatalyst is demonstrated to exhibit efficient bi-functional water splitting for the first time. The FeBP MSC electrode is synthesized by a hydrothermal approach along with the systematic control of growth parameters such as precursor concentration, reaction duration, reaction temperature and post-annealing, etc. Then, the heteroatom doping of vanadium is performed on the best FeBP MSC by a simple soaking approach. The best optimized V-FeBP MSC demonstrates the low HER and OER overpotentials of 52 and 180 mV at 50 mA/cm2 in 1 M KOH in a three-electrode system. In addition, the two-electrode system, i.e., V-FeBP || V-FeBP, demonstrates a comparable water-splitting performance to the benchmark electrodes of Pt/C || RuO2 in 1 M KOH. Similarly, exceptional performance is also observed in natural sea water. The 3D MSC flower-like structure provides a very high surface area that favors rapid mass/electron-transport pathways, which improves the electrocatalytic activity. Further, the V-FeBP electrode is examined in different pH solutions and in terms of its stability under industrial operational conditions at 60 °C in 6 M KOH, and it shows excellent stability.

Few-Layered MoS2 Nanoparticles Covering Anatase TiO2 Nanosheets: Comparison between Ex Situ and In Situ Synthesis Approaches

MoS2/TiO2 nanostructures made of MoS2 nanoparticles covering TiO2 nanosheets have been synthesized, either via ex situ or in situ approaches. The morphology and structure of the MoS2/TiO2 hybrid nanostructures have been investigated and imaged by means of X-ray diffraction (XRD) analysis and high-resolution transmission electron microscopy (HRTEM), while the vibrational and optical properties have been investigated by Raman, Fourier-transform infrared (FTIR), and UV−visible (UV–vis) spectroscopies. Different stacking levels and MoS2 nanosheets distribution on TiO2 nanosheets have been carefully evaluated from HRTEM images. Surface sites on the main exposed faces of both materials have been established by means of in situ FTIR spectra of CO probe molecule adsorption. The results of the ex situ and in situ approaches are compared to underline the role of the synthesis processes affecting the morphology and structure of MoS2 nanosheets, such as curvature, surface defects, and stacking order. It will be shown that as a result of the in situ approach, the reactivity of the TiO2 nanosheets and hence, in turn, the MoS2–TiO2 nanosheets interaction are modified.