Overall water splitting and hydrogen peroxide synthesis by gold nanoparticle-based plasmonic photocatalysts

Iron oxide-promoted photochemical oxygen reduction to hydrogen peroxide (H2O2)

Hydrogen peroxide (H2O2) is a valuable green oxidant with a wide range of applications. Furthermore, it is recognized as a possible future energy carrier achieving safe operation, storage and transportation. The photochemical production of H2O2 serves as a promising alternative to the waste- and energy-intensive anthraquinone process. Following the 12 principles of Green Chemistry, we demonstrate a facile and general approach to sustainable catalyst development utilizing earth-abundant iron and biobased sources only. We developed several iron oxide (FeOx) nanoparticles (NPs) for successful photochemical oxygen reduction to H2O2 under visible light illumination (445 nm). Achieving a selectivity for H2O2 of >99%, the catalyst material could be recycled for up to four consecutive rounds. An apparent quantum yield (AQY) of 0.11% was achieved for the photochemical oxygen reduction to H2O2 with visible light (445 nm) at ambient temperatures and pressures (9.4-14.8 mmol g-1 L-1). Reaching productivities of H2O2 of at least 1.7 ± 0.3 mmol g-1 L-1 h-1, production of H2O2 was further possible via sunlight irradiation and in seawater. Finally, a detailed mechanism has been proposed on the basis of experimental investigation of the catalyst's properties and computational results.

Coating of Filter Materials with CeO2 Nanoparticles Using a Combination of Aerodynamic Spraying and Suction

Textiles and nonwovens (including those used in ventilation systems as filters) are currently one of the main sources of patient cross-infection. Healthcare-associated infections (HAIs) affect 5-10% of patients and stand as the tenth leading cause of death. Therefore, the development of new methods for creating functional nanostructured coatings with antibacterial and antiviral properties on the surfaces of textiles and nonwoven materials is crucial for modern medicine. Antimicrobial filter technology must be high-speed, low-energy and safe if its commercialization and mass adoption are to be successful. Cerium oxide nanoparticles can act as active components in these coatings due to their high antibacterial activity and low toxicity. This paper focuses on the elaboration of a high-throughput and resource-saving method for the deposition of cerium oxide nanoparticles onto nonwoven fibrous material for use in air-conditioning filters. The proposed spraying technique is based on the use of an aerodynamic emitter and simultaneous suction. Cerium oxide nanoparticles have successfully been deposited onto the filter materials used in air conditioning systems; the antibacterial activity of the ceria-modified filters exceeded 4.0.

Near Infrared Light-to-Heat Conversion for Liquid-Phase Oxidation Reactions by Antimony-Doped Tin Oxide Nanocrystals

Effective utilization of the sunlight for chemical reactions is pivotal for dealing with the growing energy and environmental issues. So far, much effort has been focused on the development of semiconductor photocatalysts responsive to UV and visible light. However, the near infrared and infrared (NIR-IR) light occupying ∼50 % of the solar energy has usually been wasted because of the low photon energy insufficient for the band gap excitation. Antimony doping into SnO₂ (ATO) induces strong absorption due to the conduction band electrons in the NIR region. The absorbed light energy is eventually converted to heat via the interaction between hot electrons and phonons. This Concept highlights the photothermal effect of ATO nanocrystals (NCs) on liquid-phase oxidation reactions through the NIR light-to-heat conversion. Under NIR illumination even at an intensity of ∼0.5 sun, the reaction field temperature on the catalyst surface is raised 20-30 K above the bulk solution temperature, while the latter is maintained near the ambient temperature. In some reactions, this photothermal local heating engenders the enhancement of not only the catalytic activity and selectivity but also the regeneration of catalytically active sites. Further, the photocatalytic activity of semiconductors can be promoted. Finally, the conclusions and possible subjects in the future are summarized.

Controlling the Size of Au Nanoparticles on Reducible Oxides with the Electrochemical Potential

Controlling the size of Au nanoparticles (NPs) and their interaction with the oxide support is important for their catalytic performance in chemical reactions, such as CO oxidation and water-gas shift. It is known that the oxygen vacancies at the surface of support oxides form strong chemical bonding with the Au NPs and inhibit their coarsening and deactivation. The resulting Au/oxygen vacancy interface also acts as an active site for oxidation reactions. Hence, small Au NPs are needed to increase the density of the Au/oxide interface. A dynamic way to control the size of the Au NPs on an oxide support is desirable but has been missing in the field. Here, we demonstrate an electrochemical method to control the size of the Au NPs by controlling the surface oxygen vacancy concentration of the support oxide. Oxides with different reducibilities, La_0.8Ca_0.2MnO_3±δ and Pr_0.1Ce_0.9O_2-δ, are used as model support oxides. By applying the electrochemical potential, we achieve a wide range of effective oxygen pressures, pO₂ (10^-37-10¹⁴ atm), in the support oxides. Applying the cathodic potential creates a high concentration of oxygen vacancies and forms finely distributed Au NPs with sizes of 7-13 nm at 700-770 °C in 10 min, while the anodic potential oxidizes the surface and increases the size of the Au NPs. The onset cathodic potential required to create small Au NPs depends strongly on the reducibility of the support oxide. The Au NPs did not undergo sintering even at 700-770 °C under the cathodic potential and also were stable in catalytically relevant conditions without potential.

Noble Metal-Free Inorganic Photocatalyst Consisting of Antimony-Doped Tin Oxide Nanorod and Titanium oxide for Two-Electron Oxygen Reduction Reaction

This study reports a noble metal-free robust inorganic photocatalyst for H 2 O 2 synthesis via two-electron oxygen reduction reaction (ORR). Antimony-doped tin oxide nanorods were heteroepitaxially grown from rutile TiO 2 seed crystals with an orientation of (001)ATO//(001)TiO 2 (ATO-NR//TiO 2 , // denotes heteroepitaxial junction) by a hydrothermal method. UV-light irradiation of ATO-NR//TiO 2 particles stably and continuously produces H 2 O 2 from aerated aqueous solution of ethanol. Electrochemical measurements using rotating electrodes show that Sb-doping into SnO 2 greatly enhances the electrocatalytic activity for two-electron ORR. The striking photocatalytic activity of ATO-NR//TiO 2 stems from the effective charge separation, electrocatalytic activity for two-electron ORR, and low catalytic activity for H 2 O 2 decomposition.

Highly Active and Renewable Catalytic Electrodes for Two-Electron Oxygen Reduction Reaction

This study has shown that antimony-doped tin oxide (ATO) works as a robust "renewable catalyst" for the electrochemical synthesis of hydrogen peroxide (H₂O₂) from water and oxygen. Antimony doping into SnO₂ gives rise to remarkable electrocatalytic activity for two-electron oxygen reduction reaction (2e^--ORR) by water with a volcano-type relation between the activity and doping levels (x_Sb). Density functional theory simulations highlight the importance of an isolated Sb atom of ATO inducing the high activity and selectivity for 2e^--ORR due to the effects of O₂ adsorption enhancement, decrease in the activation energy, and lowering the adsorptivity of H₂O₂. Electrolysis by a normal three-electrode cell using ATO (x_Sb = 10.2 mol %) at -0.22 V (vs reversible hydrogen electrode) stably and continuously produces H₂O₂ with a turnover frequency of 6.6 s^-1. This remarkable activity can be maintained even after removing the surface layer of ATO by argon-ion sputtering.

Progress in Preparation of Sea Urchin-like Micro-/Nanoparticles

Urchin-like microparticles/nanoparticles assembled from radial nanorods have a good appearance and high specific surface area, providing more exposed active sites and shortening the diffusion path of photoexcited carriers from the interior to the surface. The interfacial interaction and physical and chemical properties of the materials can be improved by the interfacial porous network induced by interlacing nano-branches. In addition, multiple reflections of the layered microstructure can absorb more incident light and improve the photocatalytic performance. Therefore, the synthesis and functionalization of three-dimensional urchin-like nanostructures with controllable size, shape, and hierarchy have attracted extensive attention. This review aims to provide an overview to summarize the structures, mechanism, and application of urchin-like microparticles/nanoparticles derived from diverse synthesis methods and decoration types. Firstly, the synthesis methods of solid urchin-like micro-/nanoparticles are listed, with emphasis on the hydrothermal/solvothermal method and the reaction mechanism of several typical examples. Subsequently, the preparation method of composite urchin-like micro-/nanoparticles is described from the perspective of coating and doping. Then, the research progress of urchin-like hollow microspheres is reviewed from the perspective of the step-by-step method and synchronous method, and the formation mechanism of forming urchin-like hollow microspheres is discussed. Finally, the application progress of sea urchin-like particles in the fields of photocatalysis, electrochemistry, electromagnetic wave absorption, electrorheological, and gas sensors is summarized.

Temperature-Dependent Activity of Gold Nanocatalysts Supported on Activated Carbon in Redox Catalytic Reactions: 5-Hydroxymethylfurfural Oxidation and 4-Nitrophenol Reduction Comparison

In this study, the temperature-dependent activity of Au/AC nanocatalysts in redox catalytic reactions was investigated. To this end, a series of colloidal gold catalysts supported on activated carbon and titania were prepared by the sol immobilization method employing polyvinyl alcohol as a polymeric stabilizer at different hydrolysis degrees. The as-synthesized materials were widely characterized by spectroscopic analysis (XPS, XRD, and ATR-IR) as well as TEM microscopy and DLS/ELS measurements. Furthermore, 5-hydroxymethylfurfural (HMF) oxidation and 4-nitrophenol (4-NP) reduction were chosen to investigate the catalytic activity as a model reaction for biomass valorization and wastewater remediation. In particular, by fitting the hydrolysis degree with the kinetic data, volcano plots were obtained for both reactions, in which the maximum of the curves was represented relative to hydrolysis intermediate values. However, a comparison of the catalytic performance of the sample Au/AC_PVA-99 (hydrolysis degree of the polymer is 99%) in the two reactions showed a different catalytic behavior, probably due to the detachment of polymer derived from the different reaction temperature chosen between the two reactions. For this reason, several tests were carried out to investigate deeper the observed catalytic trend, focusing on studying the effect of the reaction temperature as well as the effect of support (metal–support interaction) by immobilizing Au colloidal nanoparticles on commercial titania. The kinetic data, combined with the characterization carried out on the catalysts, confirmed that changing the reaction conditions, the PVA behavior on the surface of the catalysts, and, therefore, the reaction outcome, is modified.

Rational design for gold nanoparticle-based plasmonic catalysts and electrodes for water oxidation towards artificial photosynthesis

The oxygen evolution reaction (OER) with a large overpotential is the key step common to artificial photosynthesis. In semiconductor photocatalysts, the light available to the reactions is usually limited to UV or visible with wavelengths shorter than the absorption edge of the semiconductors. On the other hand, gold nanoparticle (Au NP)-based plasmonic photocatalysts, particularly hot-electron transfer (HET)-type plasmonic photocatalysts, have the capability to utilize visible-to-near infrared light that makes up most sunlight as a driving force for the energetically uphill reactions. In recent years, experimental and theoretical studies on HET-type plasmonic photocatalysts consisting of Au NPs and a semiconductor have been intensively pursued. This perspective article highlights the fundamentals and recent progress of Au NP-based HET-type plasmonic photocatalysts for OER. After the introduction, the basics for the rational design of plasmonic photocatalysts are treated first. Secondly, the concrete design for the plasmonic photocatalysts is dealt with in the order of semiconductors, Au NPs, and their interface. Thirdly, recent advanced studies on plasmonic photocatalysts for OER are described. Finally, the conclusions are summarized with a direction for future research on plasmonic photocatalysts.

Crystallographic interface control of the plasmonic photocatalyst consisting of gold nanoparticles and titanium(iv) oxide

A big question in the field of plasmonic photocatalysis is why a typical photocatalyst consisting of gold nanoparticles and rutile titanium(iv) oxide (Au/R-TiO₂) usually exhibits activity much higher than that of Au/anatase TiO₂ (Au/A-TiO₂) under visible-light irradiation. Shedding light on the origin should present important guidelines for the material design of plasmonic photocatalysts. Au nanoparticles (NPs) were loaded on ordinary irregular-shaped TiO₂ particles by the conventional deposition precipitation method. Transmission electron microscopy analyses for the Au/TiO₂ particles ascertain that faceting of Au NPs is induced on R-TiO₂ by using a domain-matching epitaxial junction with the orientation of (111)_Au//(110)_R-TiO2, whereas non-faceted hemispherical Au NPs are exclusively formed on A-TiO₂. The faceting probability of Au NPs (P_f) on R-TiO₂ increases with decreasing Au particle size (d_Au) to reach 14% at d_Au = 3.6 nm. A clear positive correlation between the photocatalytic activity and P_f in several test reactions indicates that the heteroepitaxial junction-induced faceting of Au NPs is the principal factor for governing the plasmonic photocatalytic activity of Au/TiO₂. In light of this finding, R-TiO₂ nanorods with a high percentage (95%) of {110} facets were hydrothermally synthesized and used for the support of Au NPs. Consequently, the P_f value increases to as much as 94% to enhance the photocatalytic activity with respect to that of Au/R-TiO₂ with P_f = 14% by factors of 2.2–4.4 depending on the type of reaction.

In the represented plasmonic photocatalyst consisting of Au nanoparticles (NPs) and TiO₂, the combination of crystal facet engineering of TiO₂ and atom-level-interface control between Au NP and TiO₂ gives rise to a drastic activity enhancement.

A biomimetic all-inorganic photocatalyst for the artificial photosynthesis of hydrogen peroxide

The artificial photosynthesis of H2O2 from water and O2 presents a sustainable route for the production. Remarkable progress in the rate of reaction has recently been achieved mainly by using...

Radial TiO2 Nanorod-Based Mesocrystals: Synthesis, Characterization, and Applications

Radial TiO2 nanorod-based mesocrystals (TiO2-NR MCs) or so-called “sea-urchin-like microspheres” possess not only attractive appearance but also excellent potential as photocatalyst and electrode materials. As a new type of TiO2-NR MCs, we have recently developed a radial heteromesocrystal photocatalyst consisting of SnO2(head) and rutile TiO2 nanorods(tail) (TiO2-NR//SnO2 HEMCs, symbol “//” denotes heteroepitaxial junction) with the SnO2 head oriented in the central direction in a series of the studies on the nanohybrid photocatalysts with atomically commensurate junctions. This review article reports the fundamentals of TiO2-NR MCs and the applications to photocatalysts and electrodes. Firstly, the synthesis and characterization of TiO2-NR//SnO2 HEMCs is described. Secondly, the photocatalytic activity of recent TiO2-NR MCs and the photocatalytic action mechanism are discussed. Thirdly, the applications of TiO2-NR MCs and the analogs to the electrodes of solar cells and lithium-ion batteries are considered. Finally, we summarize the conclusions with the possible future subjects.

Bottom-up formation of gold truncated pyramids smaller than 10 nm on SrTiO3 nanocubes: an application for plasmonic water oxidation

An atomically commensurate interface gives rise to Au truncated pyramids < 10 nm on single-crystalline SrTiO₃ nanocubes (NCs) in a simple deposition-precipitation process without a surface modifier, and the resulting hybrid nanocrystals exhibit a high level of photocatalytic activity for a plasmonic oxygen evolution reaction at light wavelengths (λ_ex) ≤ 1200 nm.

Effect of Polyvinyl Alcohol Ligands on Supported Gold Nano-Catalysts: Morphological and Kinetics Studies

The effect of polyvinyl alcohol (PVA) stabilizers and gold nanoparticles supported on active carbon (AuNPs/AC) was investigated in this article. Polymers with different molecular weights and hydrolysis degrees have been synthesized and used, like the stabilizing agent of Au nano-catalysts obtained by the sol-immobilization method. The reduction of 4-nitrophenol with NaBH4 has been used as a model reaction to investigate the catalytic activity of synthesized Au/AC catalysts. In addition, we report several characterization techniques such as ultraviolet-visible spectroscopy (UV-Vis), dynamic light scattering (DLS), X-ray diffraction (XRD), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) in order to correlate the properties of the polymer with the metal nanoparticle size and the catalytic activity. A volcano plot was observed linking the catalytic performance with hydrolysis degree and the maximum of the curve was identified at a value of 60%. The Au:PVA-60 weight ratio was changed in order to explain how the amount of the polymer can influence catalytic properties. The effect of nitroaromatic ring substituents on the catalytic mechanism was examined by the Hammett theory. Moreover, the reusability of the catalyst was investigated, with little to no decrease in activity observed over five catalytic cycles. Morphological and kinetic studies reported in this paper reveal the effect of the PVA polymeric stabilizer properties on the size and catalytic activity of supported gold nanoparticles.

Atomic Level Interface Control of SnO2-TiO2 Nanohybrids for the Photocatalytic Activity Enhancement

This review article highlights atom-level control of the heterojunction and homojunction in SnO2-TiO2 nanohybrids, and the effects on the photocatalytic property. Firstly, a comprehensive description about the origin for the SnO2-TiO2 coupling effect on the photocatalytic activity in the conventional SnO2-TiO2 system without heteroepitaxial junction is provided. Recently, a bundle of thin SnO2 nanorods was hetero-epitaxially grown from rutile TiO2 seed nanocrystals (SnO2-NR#TiO2, # denotes heteroepitaxial junction). Secondly, the heterojunction effects of the SnO2-NR#TiO2 system on the photocatalytic activity are dealt with. A novel nanoscale band engineering through the atom-level control of the heterojunction between SnO2 and TiO2 is presented for the photocatalytic activity enhancement. Thirdly, the homojunction effects of the SnO2 nanorods on the photocatalytic activity of the SnO2-NR#TiO2 system and some other homojunction systems are discussed. Finally, we summarize the conclusions with the possible future subjects and prospects.

Au-Ag alloy nanoparticle-incorporated AgBr plasmonic photocatalyst

A solid-phase photochemical method produces Au-Ag alloy nanoparticles (NPs) with a sharp size distribution and varying composition in AgBr crystals (Au-Ag@AgBr). These features render Au-Ag@AgBr promising as a material for the plasmonic photocatalyst further to provide a possibility of elucidating the action mechanism due to the optical tunability. This study shows that the visible-light activity of Au-Ag@AgBr for degradation of model water pollutant is very sensitive to the alloy composition with a maximum at the mole percent of Au to all Ag in AgBr (y) = 0.012 mol%. Clear positive correlation is observed between the photocatalytic activity and the quality factor defined as the ratio of the peak energy to the full width at half maximum of the localized surface plasmon resonance band. This finding indicates that Au-Ag@AgBr works as a local electromagnetic field enhancement-type plasmonic photocatalyst in which the Au-Ag NPs mainly promotes the charge separation. This conclusion was further supported by the kinetic analysis of the light intensity-dependence of external quantum yield.

Hydrogen peroxide synthesis from water and oxygen using a three-component nanohybrid photocatalyst consisting of Au particle-loaded rutile TiO2 and RuO2 with a heteroepitaxial junction

Thin heteroepitaxial (HEPI) layers of RuO₂ were selectively formed on the TiO₂ surface of Au nanoparticle-loaded rutile TiO₂ particles (RuO₂#TiO₂-Au) with an orientation of RuO₂(110)//TiO₂(110) by a hydrothermal method, and the three-component nanohybrid exhibits a high photocatalytic activity far exceeding that of Au/TiO₂ for hydrogen peroxide generation from water and oxygen due to the HEPI junction-induced unique morphology of RuO₂.

Transparent conductive oxides in photoanodes for solar water oxidation

Rational designs of the conductive layer below photocatalytic films determine the efficiency of a photoanode for solar water oxidation. Generally, transparent conductive oxides (TCOs) are widely used as a conductive layer. In this mini review, the fundamentals of TCOs are explained and typical examples of nanoscale TCOs are presented for application in photoelectrochemical (PEC) water oxidation. In addition, hybrid structures formed by coating other photocatalysts on nanoscale TCOs are discussed. In the future, the nanostructured electrode may inspire the design of a series of optoelectronic applications.