Electronic structure engineering and biomedical applications of low energy-excited persistent luminescence nanoparticles

Competitive ELISA based on pH-responsive persistent luminescence nanoparticles for autofluorescence-free biosensor determination of ochratoxin A in cereals

An accurate and sensitive competitive enzyme-linked immunosorbent assay (ELISA) based on persistent luminescence nanoparticles Zn₂GeO₄:Mn²⁺, Eu³⁺ (ZGME) was developed for detecting ochratoxin A (OTA), a powerfully toxic mycotoxin usually found in grains. As a signal output element of autofluorescence-free biosensors, ZGME can be integrated into ELISA with glucose oxidase (GOx)-binding OTA molecules due to its excellent pH-responsive persistent luminescence. In the absence of OTA, the OTA-GOx conjugate was captured by the anti-OTA monoclonal antibody (anti-OTA mAb) pre-coated on the 96-well plate. The results indicate a decrease in the pH value of the solution, which triggered the quenching of ZGME luminescence due to GOx-dependent gluconic acid production. The presence of OTA inhibited the binding of OTA-GOx on the plate, thus decreasing the production of gluconic acid and increasing the persistent luminous intensity of ZGME. Under the optimized concentrations of anti-OTA mAb and OTA-GOx, quantitative determination of OTA was achieved by plotting the increase or decrease in persistent luminescence intensity of ZGME at 535 nm. In this study, the linear range was from 0.1 μg L^-1 to 63 μg L^-1, and the limit of detection (LOD) was as low as 0.045 μg L^-1. In five food samples (corn grit, brown rice, soybean, rice, and wheat), the results exhibited good stability and repeatability, with a recovery range from 81.3% to 94.4% and a relative standard deviation (RSD) of less than 4.2%. Hence, the established method provides a sensitive, accurate, and autofluorescence-free approach for the determination of OTA in different grain samples.

Advanced techniques for performing photodynamic therapy in deep-seated tissues

Photodynamic therapy (PDT) is a promising localized cancer treatment modality. It has been used successfully to treat a range of dermatological conditions with comparable efficacy to conventional treatments. However, some drawbacks limit the clinical utility of PDT in treating deep-seated tumors. Notably, the penetration limitation of UV and visible light, commonly applied to activate photosensitizers, makes PDT incompetent in treating deep-seated tumors. Development in light delivery technologies, especially fiber optics, led to improved clinical strategies for accessing deep tissues for irradiation. However, PDT efficacy issues remained partly due to light penetration limitations. In this review, we first summarized the current PDT applications for deep-seated tumor treatment. Then, the most recent progress in advanced techniques to overcome the light penetration limitation in PDT, including using functional nanomaterials that can either self-illuminate or be activated by near-infrared (NIR) light and X-rays as transducers, and implantable light delivery devices were discussed. Finally, current challenges and future opportunities of these technologies were discussed, which we hope may inspire the development of more effective techniques to enhance PDT efficacy against deep-seated tumors.

Non-autofluorescence Detection of H5N1 Virus Using Photochemical Aptamer Sensors Based on Persistent Luminescent Nanoparticles

Fluorescence sensing is limited in practical applications owing to multiple autofluorescent substances in complex biological samples such as serum. In this paper, the luminescence decay effect of persistent luminescent nanoparticles (PLNPs) was used to avoid the interference of autofluorescence in complex biological samples, and a non-autofluorescence molecularly imprinted polymer aptamer sensor (MIP-aptasensor) was designed to detect H5N1 virus. The proposed MIP-aptasensor consists of a magnetic MIP and aptamer-functionalized persistent luminescent nanoparticle Zn₂GeO₄:Mn²⁺-H5N1 aptamer (ZGO-H5N1 Apt). Upon simultaneous recognition of H5N1 virus, strong persistent luminescent signal changes were produced. Using the unique luminescent characteristics of PLNPs and the high selectivity of imprinted polymers and aptamers, the designed MIP-aptasensor effectively eliminates the autofluorescence background interference of serum samples and realizes the non-autofluorescence detection of H5N1 virus with high sensitivity (a limit of detection of 0.0128 HAU mL^-1, 1.16 fM) and selectivity (the imprinting factor for the target H5N1 virus was 6.72). This tool provides a strategy for the design of sensors and their application in complex biological samples.

Green Synthesis of FexOy Nanoparticles with Potential Antioxidant Properties

Iron oxide nanoparticles (Fe_xO_y-NPs) are currently being applied in numerous high-tech sectors, such as in chemical sectors for catalysis and in the medical sector for drug delivery systems and antimicrobial purposes, due to their specific, unique and magnetic properties. Nevertheless, their synthesis is under continuous investigation, as physicochemical methods are considered expensive and require toxic solvents. Thus, green nanotechnology has shown considerable promise in the eco-biogenesis of nanoparticles. In the current study, Fe_xO_y-NPs were synthesized by two different methods: via green synthesis through the use of polyphenols, which were extracted from Phoenix dactylifera L.; and via chemical synthesis, in which the reducing agent was a chemical (NaOH), and iron chloride was used as a precursor. Thus, polyphenol extraction and its ability to produce nanoparticles were evaluated based on the drying temperature used during the Phoenix dactylifera L. recollection, as well as the extraction solvent used. The results highlight the potential of polyphenols present in Phoenix dactylifera L. for the sustainable manufacture of Fe_xO_y-NPs. Finally, green and chemical syntheses were compared on the basis of physicochemical characteristics and functional properties.

Dye Sensitization Offers a Brighter Afterglow Nanoparticle Future for in vivo Recharged Luminescent Imaging

While concerns about improving recharged afterglow intensity in vivo still motivate further exploration, afterglow nanoparticles (AGNP) offer unique optical merit for autofluorescence-free biological imaging. Apart from efforts enhancing the afterglow emission properties of AGNP, improving afterglow excitation response to visible or near infrared light is important but has lacked success. Dye sensitization has been used to improve the optical response of photovoltaic nanomaterials and to enhance upconversion luminescence efficiency. This concept has recently been expanded and applied to AGNPs. As a new multifunctional nanoprobe, such dye-sensitized AGNP takes advantage of both high spatial resolution fluorescence imaging and sensitive afterglow imaging. This Concept introduces the background, the concept, mechanism, and related imaging application, as well as reviewing existing challenges and proposing future developmental directions for the dye-sensitized AGNPs.

Continuous Flow Synthesis of Persistent Luminescent Chromium-Doped Zinc Gallate Nanoparticles

Near-infrared persistent luminescent (or afterglow) nanoparticles with the biologically appropriate size are promising materials for background-free imaging applications, while the conventional batch synthesis hardly allows for reproducibility in controlling particle size because of the random variations of reaction parameters. Here, highly efficient chemistry was matched with an automated continuous flow approach for directly synthesizing differently sized ZnGa₂O₄:Cr³⁺ (ZGC) nanoparticles exhibiting long persistent luminescence. The key flow factors responsible for regulating the particle formation process, especially the high pressure-temperature and varied residence time, were investigated to be able to tune the particle size from 2 to 6 nm and to improve the persistent luminescence. Upon silica shell encapsulation of the nanoparticles accompanied by an annealing process, the persistent luminescence of the resulting particles was remarkably enhanced. High-fidelity automated flow chemistry demonstrated here offers an alternative for producing ZGC nanoparticles and will be helpful for other compositionally complex metal oxide nanoparticles.

Synthesis and Biomedical Applications of Lanthanides-Doped Persistent Luminescence Phosphors With NIR Emissions

Persistent luminescence phosphors (PLPs) are largely used in biomedical areas owing to their unique advantages in reducing the autofluorescence and light-scattering interference from tissues. Moreover, PLPs with long-lived luminescence in the near-infrared (NIR) region are able to be applied in deep-tissue bioimaging or therapy due to the reduced light absorption of tissues in NIR region. Because of their abundant election levels and energy transfer channels, lanthanides are widely doped in PLPs for the generation of NIR persistent emissions. In addition, the crystal defects introduced by lanthanides-doping can serves as charge traps in PLPs, which contributes to the enhancement of persistent luminescence intensity and the increase of persistent time. In this paper, the research progress in the synthesis and biomedical applications of lanthanides-doped PLPs with NIR emissions are systematically summarized, which can provide instructions for the design and applications of PLPs in the future.

Opportunities for Persistent Luminescent Nanoparticles in Luminescence Imaging of Biological Systems and Photodynamic Therapy

The use of luminescence in biological systems allows us to diagnose diseases and understand cellular processes. Persistent luminescent materials have emerged as an attractive system for application in luminescence imaging of biological systems; the afterglow emission grants background-free luminescence imaging, there is no need for continuous excitation to avoid tissue and cell damage due to the continuous light exposure, and they also circumvent the depth penetration issue caused by excitation in the UV-Vis. This review aims to provide a background in luminescence imaging of biological systems, persistent luminescence, and synthetic methods for obtaining persistent luminescent materials, and discuss selected examples of recent literature on the applications of persistent luminescent materials in luminescence imaging of biological systems and photodynamic therapy. Finally, the challenges and future directions, pointing to the development of compounds capable of executing multiple functions and light in regions where tissues and cells have low absorption, will be discussed.