Heterometallic Au(I)-Cu(I) Clusters: Luminescence Studies and 1O2 Production

Two different organometallic gold(I) compounds containing naphthalene and phenanthrene as fluorophores and 2-pyridyldiphenylphosphane as the ancillary ligand were synthesized (compounds 1 with naphthalene and 2 with phenanthrene). They were reacted with three different copper(I) salts with different counterions (PF₆^-, OTf^-, and BF₄^-; OTf = triflate) to obtain six Au(I)/Cu(I) heterometallic clusters (compounds 1a-c for naphthalene derivatives and 2a-c for phenanthrene derivatives). The heterometallic compounds present red pure room-temperature phosphorescence in both solution, the solid state, and air-equilibrated samples, as a difference with the dual emission recorded for the gold(I) precursors 1 and 2. The presence of Au(I)-Cu(I) metallophilic contacts has been identified using single-crystal X-ray diffraction structure resolution of two of the compounds, which play a direct role in the resulting red-shifted emission with respect to the gold(I) homometallic precursors. Polystyrene (PS) and poly(methyl methacrylate) (PMMA) polymeric matrices were doped with our luminescent compounds, and the resulting changes in their emissive properties were analyzed and compared with those previously recorded in the solution and the solid state. All complexes were tested to analyze their ability to produce ¹O₂ and present very good values of Φ_Δ up to 50%.

Mono- and Dinuclear Gold(I) Coumarin Complexes: Luminescence Studies and Singlet Oxygen Production

The 4-(thiolmethyl)-7-(diethylamino)-2H-chromen-2-one ligand has been synthesized and used as chromophore in several mono- and dinuclear gold(I) compounds that contain a phosphane at the second coordination position. Four final products were able to obtain in pure form containing one coumarin and one phosphane ligand in the case of PTA (1,3,5-triaza-7-phosphatricyclo[3.3.1.13.7]decane) and PPh₃ (triphenylphosphine); one coumarin and two gold(I)-phosphane groups in the case of phosphane=DAPTA (3,7-diacetyl-1,3,7-triaza-5-phosphabicyclo[3.3.1]nonane) and two coumarin and two gold(I) atoms in the case of phosphane=DPEphos (bis[(2-diphenylphosphino)phenyl]ether), when it was used a diphosphane. Other diphosphane ligands used were not able to give the desired products in pure form. The luminescent properties of the compounds are governed by the fluorescence of the coumarin moiety in all compounds both for measurements carried out in solution and also immobilized in PMMA organic matrix. Phosphorescence emission can be detected in all cases at 77 K both for the uncoordinated coumarin ligand and the gold(I) derivatives, being more favoured in the presence of the gold(I) heavy atom. The compounds have been used as photosensitizers to generate ¹ O₂ with moderate quantum yields values.

Highly emissive supramolecular gold(I)-BTD materials

Herein we report the synthesis of three light emitting rod-shaped gold(I) complexes by combining ethynyl-functionalized 2,1,3-benzothiadiazole (BTD), with different N-heterocyclic (imidazole, benzimidazole and phenantroimidazole) carbene gold(I) complexes. As could be determined by single crystal structure determination, the size of the N-heterocyclic carbene affects the relative disposition of the two ligands in the linear gold complexes (nearly perpendicular in the benzimidazole vs. planar in the phenantroimidazole derivative) which translates to different types of interactions between neighbouring units. In fact, the planar conformation in the more π-extended phenantroimidazole carbene allows Au(I) atoms to get sufficiently closer favouring aurophilic interactions. This compound is obtained as two different colour emitting solids which is ascribed to changes in packing modes probably leading to differences in the strength of aurophilic interactions. Interestingly, while the emission in the solid state is almost quenched, the incorporation of the compounds in polymer matrixes enhances the emissive properties of the compounds reaching near unity quantum yields.

Aggregation versus Biological Activity in Gold(I) Complexes. An Unexplored Concept

The aggregation process of a series of mono- and dinuclear gold(I) complexes containing a 4-ethynylaniline ligand and a phosphane at the second coordination position (PR3-Au-C≡CC6H4-NH2, complexes 1-5, and (diphos)(Au-C≡CC6H4-NH2)2, complexes 6-8), whose biological activity was previously studied by us, has been carefully analyzed through absorption, emission, and NMR spectroscopy, together with dynamic light scattering and small-angle X-ray scattering. These experiments allow us to retrieve information about how the compounds enter the cells. It was observed that all compounds present aggregation in fresh solutions, before biological treatment, and thus they must be entering the cells as aggregates. Inductively coupled plasma atomic emission spectrometry measurements showed that mononuclear complexes are mainly found in the cytosolic fraction; the dinuclear complexes are mainly found in a subsequent fraction composed of nuclei and cytoskeleton. Additionally, dinuclear complex 8 affects the actin aggregation to a larger extent, suggesting a cooperative effect of dinuclear compounds.

Comprehensive Investigation of the Photophysical Properties of Alkynylcoumarin Gold(I) Complexes

Six gold(I) complexes (R₃P-Au-Coum) containing three different alkynylcoumarin chromophores (Coum) with different electron-donating and electron-withdrawing characteristics and two different water-soluble phosphanes (PR₃ = PTA (a) and DAPTA (b)) have been synthesized (1a,b, unsubstituted coumarin; 2a,b, 4-methyl substituted coumarin; 3a,b, 3-chloro and 4-methyl substituted coumarin). A comprehensive study of the photophysical properties of the R₃P-Au-Coum, together with their propynyloxycoumarin precursors 1-3, was performed in solution at room and low temperatures. Spectral and photophysical characteristics of the R₃P-Au-Coum essentially depend on the electronic characteristics of the propynyloxycoumarin ligand. The presence of the Au(I) atom was found to be responsible for an increase of the intersystem crossing, with triplet state quantum yield values, ϕ_T, ranging from ∼0.05 to 0.35 and high coumarin phosphorescence quantum yield values for derivatives 1 and 2; fluorescence dominates the deactivation in derivatives 3. Efficient singlet oxygen photosensitization was observed for the new compounds 3a,b. From TDDFT calculations, the relevant HOMO and LUMO of the compounds, i.e., those involved in the transitions, are dominated by the frontier orbitals associated with the coumarin core. The Au(I)-phosphane structure introduces a new transition assigned to an intraligand transition involving the phosphane ligand, and π(C≡C) system, to the p orbitals of phosphorus and gold atoms.

Time-Dependent Molecular Rearrangement of [Au(N9-adeninate)(PTA)] in Aqueous Solution and Aggregation-Induced Emission in a Hydrogel Matrix

An in-depth study of the molecular rearrangement of the complex [Au(N⁹-adeninate)(PTA)] (1), promoted in aqueous solution, is presented. This complex, which has been previously described as forming dimers in its crystalline form, is also demonstrated as being able to assemble into an infinite Au^I···Au^I chain polymer. The structural motifs are tentatively related to the dramatic modification of the photoemissive properties of 1 in water solution at long times, with the aid of UV-vis and photoluminescence measurements, PGSE-NMR, and theoretical calculations. A subtle equilibrium in favor of aurophilically governed aggregates has been envisaged as the driving force of the molecular rearrangement. Furthermore, 1 has been explored as an additive of the hydrogel of [Au(N⁹-adeninate)(PMe₃)] (2) for a further tuning of its photophysical properties without loss of the gel texture.

Gold(i)-doped films: new routes for efficient room temperature phosphorescent materials

The synthesis of four novel gold(i)-phosphane complexes coordinated to 9-phenanthrene chromophore has been carried out through the reaction of 9-phenanthreneboronic acid and the corresponding AuClPR₃ (PR₃ = PPh₃ for triphenylphosphane (1a); 1,4-bis(diphenylphosphanyl)butane or dppb (2b); bis(diphenylphosphanyl)acetylene or dppa (2c); (AuCl)₂(diphos) (diphos = bis(diphenylphosphanyl)methane or dppm (3)) sources. The X-ray crystal structures of compounds 1a and 2b show the existence of MOF-like intermolecular assemblies that contain empty inner cavities in the absence of aurophilic contacts. In contrast, the formation of a tetranuclear complex with intramolecular aurophilic interactions was evidenced for 3. Photophysical characterization indicates dual emission in all gold(i) complexes when oxygen is removed from the sample, while only fluorescence emission is recorded for the uncoordinated ligand. The introduction of the compounds within PMMA and Zeonex was assayed, and luminescent films containing gold(i) complexes where phosphorescence is the sole pathway for emission are obtained, instead of the dual emission (with significant fluorescence contribution) recorded in solution.

Tripodal gold(i) polypyridyl complexes and their Cu+ and Zn2+ heterometallic derivatives. Effects on luminescence

Three gold(i) tripodal complexes containing the tris(2-pyridylmethyl)amine (TPA) ligand coordinated to Au-PR₃ moieties (PR₃ = 1,3,5-triaza-7-phosphatricyclo[3.3.1.13.7]decane, PTA (1), 3,7-diacetyl-1,3,7-triaza-5-phosphabicyclo[3.3.1]nonane, DAPTA (2) and triphenylphosphane (3)) were prepared together with a cage-like structure containing triphosphane 1,1,1-tris(diphenylphosphinomethyl)ethane (4). The luminescence of these complexes has been studied and they show a red shift upon the formation of heterometallic complexes by reaction with Zn(NO₃)₂, CuCl and [Cu(CH₃CN)₄]BF₄. The different coordination motifs of the Zn²⁺ and Cu⁺ heterometallic species and the resulting changes in the recorded absorption, emission and NMR spectra were analysed and supported by TD-DFT calculations.

Facile morphology control of gold(0) structures from aurophilic assemblies

Different gold microstructures have been synthesized by using supramolecular gold(i) organometallic compounds as templates and Ag nanoparticles as reducing agents. The use of fibers resulting from supramolecular assemblies of neutral gold(i) compounds gives rise to the formation of microrods. The use of supramolecular assemblies from ionic molecules results in spherical or square-based prism gold microstructures, depending on the shape of the supramolecular gold(i) precursor assembly. In addition to temperature and reaction time, solvents exert a strong influence on the formation and morphology of gold structures, as borne out by the example that well-defined star-like morphologies have been obtained in chloroform.

Luminescent Tetranuclear Gold(I) Dibenzo[g,p]chrysene Derivatives: Effect of the Environment on Photophysical Properties

A new 2,7,10,15-tetraethynyldibenzo[g,p]chrysene ligand (1) and two tetranuclear gold(I) derivatives containing PPh₃ (3) and PMe₃ (4) phosphines were synthesized and characterized by ¹H and ³¹P NMR, IR spectroscopy, and high-resolution mass spectrometry. The compounds were studied in order to analyze the effect of the introduction of gold(I) on the supramolecular aggregation and photophysical properties. Absorption and emission spectra displayed broad bands due to the establishment of π π interactions as an indication of intermolecular contacts and the formation of aggregates. A decrease of the recorded quantum yield (QY) of the gold(I) derivatives was observed compared to the uncomplexed ligand. The introduction of the complexes into poly methyl methacrylate (PMMA) and Zeonex 480R matrixes was analyzed, and an increase of the measured QY of 4 in Zeonex was observed. No phosphorescent emission was detected.