A Two-Step Surface Modification Methodology for the Advanced Protection of a Stone Surface

The biodeterioration of the natural surface on monuments, historical buildings, and even public claddings brings to the attention of researchers and historians the issues of conservation and protection. Natural stones undergo changes in their appearance, being subjected to deterioration due to climatic variations and the destructive action of biological systems interfering with and living on them, leading to ongoing challenges in the protection of the exposed surfaces. Nanotechnology, through silver nanoparticles with strong antimicrobial effects, can provide solutions for protecting natural surfaces using specific coupling agents tailored to each substrate. In this work, surfaces of two common types of natural stone, frequently encountered in landscaping and finishing works, were modified using siloxane coupling agents with thiol groups. Through these agents, silver nanoparticles (AgNPs) were fixed, exhibiting distinct characteristics, and subjected to antimicrobial analysis. This study presents a comparative analysis of the efficiency of coupling agents that can be applied to a natural surface with porous structures, when combined with laboratory-obtained silver nanoparticles, in reducing the formation of microbial biofilms, which are a main trigger for stone biodeterioration.

Highly Enantioselective Binaphthyl-Based Chiral Phosphoramidite Stabilized-Palladium Nanoparticles for Asymmetric Suzuki C-C Coupling Reactions

The optically pure binaphthyl-based phosphoramidite ligands and their perfluorinated analogs have been first used for the preparation of chiral palladium nanoparticles (PdNPs). These PdNPs have been extensively characterized by X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, ³¹P NMR, and thermogravimetric analysis techniques. The circular dichroism(CD) analysis of chiral PdNPs exhibited negative cotton effects. Perfluorinated phosphoramidite ligands provided smaller (2.32-3.45 nm) and well-defined nanoparticles, in comparison with the nonfluorinated analog (4.12 nm). The catalytic behavior of binaphthyl-based phosphoramidite stabilized chiral PdNPs has been investigated in the asymmetric Suzuki C-C coupling reactions for the formation of sterically hindered binaphthalene units, and high isolated yields (up to 85%) were achieved with excellent enantiomeric excesses (>99% ee). Recycling studies revealed that chiral PdNPs could be reused over 12 times without significant loss in activity and enantioselectivity (>99% ee). The nature of the active species was also investigated with a combination of poisoning and hot filtration tests and found that catalytically active species is the heterogeneous nanoparticles. These results indicate that the use of phosphoramidite ligands as a stabilizer for developing efficient and unique chiral nanoparticles could open up a field for many other asymmetric organic transformations promoted by chiral catalysts.

Influence of Co doping on phase, structure and electrochemical properties of hydrothermally obtained CoxZn1-xFe2O4 (x = 0.0-0.4) nanoparticles

In this work, Co_xZn_1-xFe₂O₄ (x = 0.0-0.4) nanoparticles (NPs) were successfully synthesized by a hydrothermal method at 200 °C for 12 h. X-ray diffraction revealed a pure cubic spinel phase of all samples with space group Fd-3m. Fourier transform infrared spectrometry disclosed the vibrational modes of metal oxides in the spinel structure. Scanning electron microscopy and transmission electron microscopy disclosed a uniform distribution of cuboidal shape NPs with a decreased average NPs size from 22.72 ± 0.62 to 20.85 ± 0.47 nm as the Co content increased. X-ray absorption near edge spectroscopy results confirmed the presence of Zn²⁺, Co²⁺ and Fe²⁺/Fe³⁺ in Co-doped samples. The pore volume, pore size and specific surface area were determined using N₂ gas adsorption/desorption isotherms by the Brunauer-Emmett-Teller (BET) and Barrett-Joyner-Halenda (BJH) techniques. Electrochemical properties of supercapacitors, having active Co_xZn_1-xFe₂O₄ (x = 0.0-0.4) NPs as working electrodes, indicated pseudo-capacitor performance related to the Faradaic redox reaction. Interestingly, the highest specific capacitance (Csc), 855.33 F/g at 1 A/g, with a capacity retention of 90.41% after 1000 GCD cycle testing was achieved in the Co_0.3Zn_0.7Fe₂O₄ electrode.

Influence of silver ion release on the inactivation of antibiotic resistant bacteria using light-activated silver nanoparticles

The widespread increase in antibiotic resistance (AR), in an extensive range of microorganisms, demands the development of alternative antimicrobials with novel non-specific low-mutation bacterial targets. Silver nanoparticles (AgNPs) and photosensitizers (PSs) are promising antimicrobial agents with broad-spectrum activity and low tendency for antimicrobial resistance development. Herein, we investigated the light-mediated oxidation of AgNPs for accelerated release of Ag⁺ in the antibacterial synergy of PS-AgNP conjugates using protoporphyrin IX (PpIX) as a PS. Also, the influence of polyethyleneimine (PEI) coated AgNPs in promoting antibacterial activity was examined. We synthesized, characterized and tested the antimicrobial effect of three nanoparticles: AgNPs, PpIX-AgNPs, and PEI-PpIX-AgNPs against a methicillin-resistant Staphylococcus aureus strain (MRSA) and a wild-type multidrug resistant (MDR) E. coli. PpIX-AgNPs were the most effective material achieving >7 log inactivation of MRSA and MDR E. coli. The order of bacterial log inactivation was PpIX-AgNPs > PEI-PpIX-AgNPs > AgNPs. This order correlates with the trend of Ag⁺ concentration released by the NPs (PpIX-AgNPs > PEI-PpIX-AgNPs > AgNPs). Our study confirms a synergistic effect between PpIX and AgNPs in the inactivation of AR pathogens with about 10-fold increase in inactivation of ARB relative to AgNPs only. The concentration of Ag⁺ released from NPs determined the log inactivation of MRSA and MDR E. coli more than either the phototoxic effect or the electrostatic interaction promoted by surface charge of nanoparticles with bacteria cells. All NPs showed negligible cytotoxicity to mammalian cells at the bacterial inhibitory concentration after 24 h exposure. These observations confirm the crucial role of optimized Ag⁺ release for enhanced performance of AgNP-based antimicrobials against AR pathogens.

Catalytically active silver nanoparticles stabilized on a thiol-functionalized metal-organic framework for an efficient hydrogen evolution reaction

A post-synthetic technique, Solvent Assisted Ligand Incorporation (SALI), was used for thiol functionalization in the zirconium-based metal-organic framework NU-1000. This thiol-functionalized MOF was employed as a support for the growth of silver nanoparticles (Ag NPs) through coordination of a Ag(I) complex with a node-anchored thiol-ligand, followed by the reduction of Ag(I) to Ag(0). X-ray photoelectron spectroscopy revealed that the ratio of Ag(0) to Ag(I) proportionally increased with the loading of silver ions. The HER activity increased with the enhancement of Ag(0) in the system and the best efficiency was observed for the composite with ∼95% Ag(0). This composite displayed an overpotential of 165 mV in an acidic medium at 10 mA cm^-2 and a Tafel slope of 53 mA dec^-1. The loading of silver beyond the optimum value led to the aggregation of the particles which affected the overpotential substantially. The catalyst demonstrated appreciable static stability for 24 h, which promotes the use of the material as an HER catalyst. Therefore, these results emphasized that Ag NPs embedded onto a thiol-functionalized MOF is a propitious material for developing a clean and renewable energy source.

Silver Nanoparticle-Incorporated Defect-Engineered Zr-based Metal-Organic Framework for Efficient Multicomponent Catalytic Reactions

Small-sized silver nanoparticles are incorporated into a thiol-functionalized stable Zr-based metal-organic framework (MOF). Thiol functionalization has been carried out using 2-mercapto benzoic acid (2-MBA) as the modulator, which promotes defect formation in the MOF structure. The incorporation of silver nanoparticles aided by the silver-sulfur interactions in this defective MOF gives rise to catalytic activity. Its catalytic efficiency in the highly atom-efficient A³ coupling reaction has been studied for a variety of substrates with impressive recyclability. The synergistic effect of the electron-rich silver core and electron-deficient surface of the thiol-bonded silver nanoparticle is key for this catalytic reaction.

Controlled Synthesis of Platinum and Silver Nanoparticles Using Multivalent Ligands

Here, the controlled formation of platinum nanoparticles (PtNPs) and silver nanoparticles (AgNPs) using amine-functionalized multivalent ligands are reported. The effects of reaction temperature and ligand multivalency on the growth kinetics, size, and shape of PtNPs and AgNPs were systematically studied by performing a stepwise and a one-step process. PtNPs and AgNPs were prepared in the presence of amine ligands using platinum (II) acetylacetonate and silver (I) acetylacetonate, respectively. The effects of ligands and temperature on the formation of PtNPs were studied using a transmission electron microscope (TEM). For the characterization of AgNPs, additionally, ultraviolet-visible (UV-Vis) absorption was employed. The TEM measurements revealed that PtNPs prepared at different temperatures (160–200 °C, in a stepwise process) are monodispersed and of spherical shape regardless of the ligand multivalency or reaction temperature. In the preparation of PtNPs by the one-step process, ligands affect the shape of the PtNPs, which can be explained by the affinity of the ligands. The TEM and UV-Vis absorption studies on the formation of AgNPs with mono-, di-, and trivalent ligands showed narrower size distributions, while increasing the temperature from 80 °C to 120 °C and with a trivalent ligand in a one-step process.

Design and fabrication of electrochemical sensor based on molecularly imprinted polymer loaded onto silver nanoparticles for the detection of 17-β-Estradiol

In this research report, we prepared an electrochemical sensor based on the molecularly imprinted poly(p-aminophenol) supported by silver nanoparticles capped with 2-mercaptobenzoxazole (AgNP) for the selective and sensitive detection of endocrine disrupting 17β-estradiol (E2). The electropolymerization of the functional monomer prepared the proposed MIP composite-based sensor in the presence of E2 as a template. The recognition materials were characterized using Fourier transform infrared, cyclic voltammetry (CV), square wave voltammetry (SWV), scanning electron microscopy, energy-dispersive X-ray spectroscopy and x-ray powder diffraction techniques. The electrochemical measurements were performed by employing both CV and SWV methods. We did the optimization of critical parameters affecting the sensor performances through the experimental design and verification. The developed sensor showed a linear range from 10 pM to 100 nM with the calculated quantification and detection limits of 1.86 pM and 6.19 pM, respectively. The incorporation of AgNP with high electrical conductivity into the MIP matrix enhanced the sensor's performance. Furthermore, the sensor was applied to determine E2 in real water samples without any sample preconcentration steps to achieve the percent recovery of 91.87-98.36% and acceptable reusability and storage stability performances. This article is protected by copyright. All rights reserved.

Green Synthesis of Silver Nanoparticles by the Cyanobacteria Synechocystis sp.: Characterization, Antimicrobial and Diabetic Wound-Healing Actions

Green nanotechnology is now accepted as an environmentally friendly and cost-effective advance with various biomedical applications. The cyanobacterium Synechocystis sp. is a unicellular spherical cyanobacterium with photo- and hetero-trophic capabilities. This study investigates the ability of this cyanobacterial species to produce silver nanoparticles (AgNPs) and the wound-healing properties of the produced nanoparticles in diabetic animals.

METHODS

UV-visible and FT-IR spectroscopy and and electron microscopy techniques investigated AgNPs' producibility by Synechocystis sp. when supplemented with silver ion source. The produced AgNPs were evaluated for their antimicrobial, anti-oxidative, anti-inflammatory, and diabetic wound healing along with their angiogenesis potential.

RESULTS

The cyanobacterium biosynthesized spherical AgNPs with a diameter range of 10 to 35 nm. The produced AgNPs exhibited wound-healing properties verified with increased contraction percentage, tensile strength and hydroxyproline level in incision diabetic wounded animals. AgNPs treatment decreased epithelialization period, amplified the wound closure percentage, and elevated collagen, hydroxyproline and hexosamine contents, which improved angiogenesis factors' contents (HIF-1α, TGF-β1 and VEGF) in excision wound models. AgNPs intensified catalase (CAT), superoxide dismutase (SOD), and glutathione peroxidase (GPx) activities, and glutathione (GSH) and nitric oxide content and reduced malondialdehyde (MDA) level. IL-1β, IL-6, TNF-α, and NF-κB (the inflammatory mediators) were decreased with AgNPs' topical application.

CONCLUSION

Biosynthesized AgNPs via Synechocystis sp. exhibited antimicrobial, anti-oxidative, anti-inflammatory, and angiogenesis promoting effects in diabetic wounded animals.

Silver Nanoparticle-Based Sensor for the Selective Detection of Nickel Ions

Silver nanoparticles (AgNPs) can be used as a surface plasmon resonance (SPR) colorimetric sensor; the correlation between the SPR phenomenon and the aggregation state of nanoparticle allows the real-time detection of a target molecule. Surface functionalization of NPs with proper molecular baits is often performed to establish the selectivity of the sensor. This work reports on the synthesis of AgNPs under reducing conditions and on the functionalization thereof with mercaptoundecanoic acid (11-MUA). UV-VIS Spectroscopy confirmed the formation of AgNPs, eliciting a surface plasmon absorption band (SPAB) at 393 nm that shifted to 417 nm upon surface coating. Dynamic light scattering was used to investigate the surface coatings; moreover, pelleted AgNPs@11MUA nanoparticles were characterized by scanning electron microscopy (SEM), energy dispersive X-ray analyzers (EDX), and infrared spectroscopy to corroborate the presence of 11MUA on the surface. Most interestingly, the resulting AgNPs@11MUA selectively detected micromolar levels of Ni²⁺, also in the presence of other cations such as Mn²⁺, Co²⁺, Cd²⁺, Cu²⁺, Zn²⁺, Fe²⁺, Hg²⁺, Pb²⁺, and Cr³⁺.

A simple thermometer-based photothermometric assay for alkaline phosphatase activity based on target-induced nanoprobe generation

Alkaline phosphatase (ALP)-induced in situ generation of Prussian blue nanoparticles for photothermometric ALP detection.