Role of La-based perovskite catalysts in environmental pollution remediation

Since the advent of the industrial revolution, there has been a constant need of efficient catalysts for abatement of industrial toxic pollutants. This phenomenon necessitated the development of eco-friendly, stable, and economically feasible catalytic materials like lanthanum-based perovskite-type oxides (PTOs) having well-defined crystal structure, excellent thermal, and structural stability, exceptional ionic conductivity, redox behavior, and high tunability. In this review, applicability of La-based PTOs in remediation of pollutants, including CO, NO x and VOCs was addressed. A framework for rationalizing reaction mechanism, substitution effect, preparation methods, support, and catalyst shape has been discussed. Furthermore, reactant conversion efficiencies of best PTOs have been compared with noble-metal catalysts for each application. The catalytic properties of the perovskites including electronic and structural properties have been extensively presented. We highlight that a robust understanding of electronic structure of PTOs will help develop perovskite catalysts for other environmental applications involving oxidation or redox reactions.

Modified BaMnO3-Based Catalysts for Gasoline Particle Filters (GPF): A Preliminary Study

Gasoline engines, mainly gasoline direct injection engines (GDI) require, in addition to three-way catalysts (TWC), a new catalytic system to remove the formed soot. Gasoline Particle Filters (GPF) are, among others, a possible solution. BaMnO3 and copper-doped BaMnO3 perovskites seem to be a feasible alternative to current catalysts for GPF. The physical and chemical properties of these two perovskites determining the catalytic performance have been modified using different synthesis routes: (i) sol-gel, (ii) modified sol-gel and iii) hydrothermal. The deep characterization allows concluding that: (i) all samples present a perovskite-like structure (hexagonal), except BMC3 which shows a polytype one (due to the distortion caused by copper insertion in the lattice), and ii) when a low calcination temperature is used during synthesis, the sintering effect decreases and the textural properties, the reducibility and the oxygen mobility are improved. The study of soot oxidation simulating the hardest GDI scenarios reveals that, as for diesel soot removal, the best catalytic performance involves the presence of oxygen vacancies to adsorb and activate oxygen and a labile Mn (IV)/Mn (III) redox pair to dissociate the adsorbed oxygen. The combination of both properties allows the transport of the dissociated oxygen towards the soot.

Yttrium-based Double Perovskite Nanorods for Electrocatalysis

Herein, we investigate the effect of the chemical composition of double perovskite nanorods on their versatile electrocatalytic activity not only as supports for the oxidation of small organic molecules but also as catalysts for the oxygen evolution reaction. Specifically, Y₂CoMnO₆ and Y₂NiMnO₆ nanorods with average diameters of 300 nm were prepared by a two-step hydrothermal method, in which the individual effects of synthetic parameters, such as the pH, annealing temperature, and precursor ratios on both the composition and morphology, were systematically investigated. When used as supports for Pt nanoparticles, Y₂CoMnO₆/Pt catalysts exhibited an electrocatalytic activity for the methanol oxidation reaction, which is 2.1 and 1.3 times higher than that measured for commercial Pt/C and Y₂NiMnO₆/Pt, respectively. Similarly, the Co-based catalyst support material displayed an ethanol oxidation activity, which is 2.3 times higher than both Pt/C and Y₂NiMnO₆/Pt. This clear enhancement in the activity for Y₂CoMnO₆ can largely be attributed to strong metal-support interactions, as evidenced by a downshift in the binding energy of the Pt 4f bands, measured by X-ray photoelectron spectroscopy (XPS), which is often correlated not only with a downshift in the d-band center but also to a decreased adsorption of poisoning adsorbates. Moreover, when used as catalysts for the oxygen evolution reaction, Y₂CoMnO₆ displayed a much greater activity as compared with Y₂NiMnO₆. This behavior can largely be attributed not only to a preponderance of comparatively more favorable oxidation states and electronic configurations but also to the formation of an active layer on the surface of the Y₂CoMnO₆ catalyst, which collectively gives rise to improved performance metrics and greater stability as compared with both IrO₂ and Y₂NiMnO₆. Overall, these results highlight the importance of both the chemical composition and the electronic structure of double perovskites, especially when utilized in multifunctional roles as either supports or catalysts.

Improving the Performance of BaMnO3 Perovskite as Soot Oxidation Catalyst Using Carbon Black during Sol-Gel Synthesis

A series of BaMnO₃ solids (BM-CX) were prepared by a modified sol-gel method in which a carbon black (VULCAN XC-72R), and different calcination temperatures (600–850 °C) were used. The fresh and used catalysts were characterized by ICP-OES, XRD, XPS, FESEM, TEM, O_2-TPD and H_2- TPR-. The characterization results indicate that the use of low calcination temperatures in the presence of carbon black allows decreasing the sintering effects and achieving some improvements regarding BM reference catalyst: (i) smaller average crystal and particles size, (ii) a slight increase in the BET surface area, (iii) a decrease in the macropores diameter range and, (iv) a lower temperature for the reduction of manganese. The hydrogen consumption confirms Mn(III) and Mn(IV) are presented in the samples, Mn(III) being the main oxidation state. The BM-CX catalysts series shows an improved catalytic performance regarding BM reference catalyst for oxidation processes (NO to NO₂ and NO₂-assisted soot oxidation), promoting higher stability and higher CO₂ selectivity. BM-C700 shows the best catalytic performance, i.e., the highest thermal stability and a high initial soot oxidation rate, which decreases the accumulation of soot during the soot oxidation and, consequently, minimizes the catalyst deactivation.

Surface acid etching for efficient anchoring of potassium on 3DOM La0.8Sr0.2MnO3 catalyst: An integration strategy for boosting soot and NOx simultaneous elimination

The emission of soot and NOx is one of the most severe environmental issues, and the key factor is the development of catalysts in after-treatment systems. In this study, an innovative non-noble metal catalyst, named HKLSM, was fabricated by etching 3DOM La_0.8Sr_0.2MnO₃ with citric acid and synchronously anchoring potassium salt, for soot and NOx simultaneous removal. The citric acid could not only slightly erode the 3DOM skeleton, thereby beneficial to the dispersion of potassium, but also react with high-valence state Mn to generate abundant coordination unsaturated Mn³⁺ sites, which could produce more active oxygen species. Moreover, HKLSM showed a higher NOx adsorption capability than the samples that were not subjected to acid etching. This adsorbed NOx could be stored as NO₃^- species, which could facilitate soot combustion. Among all the as-prepared catalysts, HKLSM demonstrated a competitive soot combustion activity with a T₅₀ value of 368 °C, a TOF value of 3.24 × 10^-4 s^-1, a reaction rate of 1.87 × 10^-7 molg^-1s^-1, a total NOx to N₂ yield of 42.0% and favorable reusability and water-resistance. This integration strategy can rationalize an alternative protocol to soot and NOx simultaneous elimination or even other catalysis systems.

Room-temperature efficient NO2 gas sensors fabricated by porous 3D flower-like ZnAl-layered double hydroxides

Three-dimensional (3D) flower-like zinc and aluminum-sodium dodecyl sulfate-layered double hydroxides (ZnAl-SDS-LDHs) intercalated by anions were prepared using a simple one-step hydrothermal method.