Advances in Optical Probes for the Detection of Hydrazine in Environmental and Biological Systems

Hydrazine, as a crucial raw material in the fine chemical industry, plays an indispensable role in fuel, catalyst, pesticide and drug synthesis. Due to its good water solubility and high toxicity, hydrazine can cause irreparable damage to water and soil in the environment, and it can also be released by taking certain drugs, which brings potential risks to human health. Therefore, it is vital to develop a method that can specifically detect hydrazine in the environment and in vivo. As an effective analysis and detection tool, fluorescence probe has attracted extensive attention in recent years. In this review, we summarized and classified hydrazine fluorescence probes based on various reaction mechanisms, and discussed their structures and applications in the past ten years. At least, we briefly outline the challenges and prospects in this field.

A near-infrared ratiometric fluorescent probe for hydrazine and its application for gaseous sensing and cell imaging

Hydrazine (N₂H₄) is a widely used raw material in the chemical industry, but at the same time hydrazine has extremely high toxicity. Therefore, the development of efficient detection methods is crucial for monitoring hydrazine in the environment and evaluating the biological toxicity of hydrazine. This study reports a near-infrared ratiometric fluorescent probe (DCPBCl₂-Hz) for the detection of hydrazine by coupling a chlorine-substituted D-π-A fluorophore (DCPBCl₂) to the recognition group acetyl. Due to the halogen effect of chlorine substitution, the fluorophore has an elevated fluorescence efficiency and a lowered pKa value and is suitable for physiological pH conditions. Hydrazine can specifically react with the acetyl group of the fluorescent probe to release the fluorophore DCPBCl₂, so the fluorescence emission of the probe system significantly shifted from 490 nm to 660 nm. The fluorescent probe has many advantages, such as good selectivity, high sensitivity, large Stokes shift, and wide applicable pH range. The probe-loaded silica plates can realize convenient sensing gaseous hydrazine with content down to 1 ppm (mg/m³). Subsequently, DCPBCl₂-Hz was successfully applied to detect hydrazine in soils. In addition, the probe can also penetrate living cells and allow the visualization of intracellular hydrazine. It can be anticipated that probe DCPBCl₂-Hz will be a useful tool for sensing hydrazine in biological and environmental applications.

Naphthalene-based fluorescent probe for on-site detection of hydrazine in the environment

The widespread occurrence of hydrazine residues in the environment, including in water, soil, and organisms, is a potential health threat to humans. Therefore, the development of an efficient method for the detection of hydrazine in environmental samples is highly desirable although it poses a significant challenge. In this study, we designed and synthesized a series of naphthalene-based fluorescent dyes through structural engineering and developed a novel probe for hydrazine detection. The probe could provide a distinct fluorescence response toward hydrazine in aqueous solution with high sensitivity and selectivity. Moreover, paper-based test strips can be easily fabricated using this probe, enabling the portable on-site detection of hydrazine with the aid of a smartphone. Furthermore, we demonstrated that this probe is capable of recognizing hydrazine in various environmental samples, including water, soil, plants, and zebrafish embryos. This research provides a promising tool for the detection of hydrazine in the environment.

Recent Advancements in the Design and Development of Near Infrared (NIR) Emitting Fluorescent Probes for Sensing and their Bio-Imaging Applications

Fluorescent bio-imaging will be the future in the medical diagnostic for visualising inner cellular and tissues. Near-infrared (NIR) emitting fluorescent probes serve dynamically for targeted fluorescent imaging of live cells and tissues. NIR imaging is advantageous because of its merits like deep tissue penetration, minimum damage to the tissue, reduced auto fluorescence from the background, and improved resolution in imaging. The Development of the NIR emitting probe was well explored recently and growing drastically. In this review, we summarise recent achievements in NIR probes in between 2018-2021. The merits and future applications have also been discussed in this review.

A dual-ratiometric mitochondria-targeted fluorescent probe to detect hydrazine in soil samples and biological imaging

Hydrazine (N₂H₄) is carcinogenic, extremely toxic, and induces serious environmental contamination and physiological dysfunction; however, it is widely used as an industrial material. Hence, the development of a simple and effective analytical method to detect N₂H₄ detection in both environmental and biological sectors is warranted. In this work, an intramolecular charge transfer (ICT)-based fluorescent probe 1, namely (Z)- 1-(4-acetoxybenzyl)- 4-(1-cyano-2-(7-(diethylamino)- 2-oxo-2 H-chromen-3-yl)vinyl)pyridin-1-ium, was designed for dual-excitation (420 and 600 nm, excitation separations >160 nm), near infrared (NIR)-emissive, and ratiometric fluorescent detection of N₂H₄. The sensing behavior of probe 1 for N₂H₄ detection was shown to be available over a wide pH range, and detection limits of 68 nM and 569 nM were achieved at excitation wavelengths of 420 and 600 nm, respectively. In addition, probe 1 was successfully used to image mitochondrial N₂H₄ in living cells and zebrafish. Furthermore, the probe was also capable of determining hydrazine signals in test strips and environmental soil.

Sensing for hydrazine of a pyrene chalcone derivative with acryloyl terminal group

Hydrazine, as a toxic substance, seriously endangers human health and the environment. Based on the excellent luminescent properties and low biological toxicity of pyrene derivatives, combing with chalcone derivatives easily attacked by nucleophilic group, a pyrene derivative PCA decorated by acryloyl terminal group as fluorescent probe for hydrazine was developed. The compound shows fluorescent peak red shift and intensity enhancement with increasing solvent polarity from hexane (459 nm) to methanol (561 nm). Based on strong fluorescence emission in methanol, methanol-HEPES mixed solution was used as the solvent in the spectral recognition experiments. The probe exhibits fluorescent change from yellow fluorescence (576 nm) to blue fluorescence (393 nm) with 800-fold ratiometric fluorescence enhancement (I_393nm/I_576nm) after the reaction with hydrazine. The probe can recognize hydrazine in fast response rate with kinetic constant calculated being 2.7 × 10^-3 s^-1 and 15 min as response time. The probe also can monitor hydrazine in real water samples and various soils.

A lysosomal targeted fluorescent probe based on coumarin for monitoring hydrazine in living cells with high performance

A lysosomal targeted fluorescent probe based on coumarin for monitoring hydrazine (N₂H₄) in living cells was designed and synthesised. The novel fluorescent probe Cou-Lyso-N2H4, in response to N₂H₄, exhibited good selectivity, low cytotoxicity, and lysosomal localization, which could be suitable for studying the harmfulness of N₂H₄ in subcellular organelles during various physiological processes.

A novel fluorescent probe with aggregation induced emission (AIE) effect based on 1,4-dihydropyridine and its applications

A fluorescent hydrazine hydrate probe (DMA) based on 1,4-dihydropyridine derivatives was designed and synthesized. The fluorescence emission peak of this probe is in the near-infrared region (667 nm), which has good selectivity to hydrazine hydrate and low detection limit (11 nM). Importantly, the probe exhibits aggregation-induced emission (AIE) characteristics. In addition, the probe is prepared with a portable test paper to realize the identification of hydrazine hydrate in the solution and the quantitative detection of hydrazine hydrate gas.

A highly-sensitive "turn on" probe based on coumarin β-diketone for hydrazine detection in PBS and living cells

Herein, a new "turn on" fluorescent probe C-1 is developed to specifically detect hydrazine using coumarin nucleus as the fluorophore and β-diketone as the recognition group. The probe shows high selectivity towards hydrazine over other common ions and amine-containing species, as well as good water solubility and quantitative detectability of hydrazine in concentration range of 1-200 μM. The detection limit is as low as 1.89 ppb, which is lower than the threshold set by EPA (10 ppb). Probe-coated filter papers are confirmed to detect gaseous hydrazine successfully through obvious fluorescence color changes. In addition, the probe has been verified to detect hydrazine in actual water environment and living cells.

Diethyl Malonate-Based Turn-On Chemical Probe for Detecting Hydrazine and Its Bio-Imaging and Environmental Applications With Large Stokes Shift

Diethyl malonate-based fluorescent probe NE-N₂H₄ was constructed for monitoring hydrazine (N₂H₄). The novel probe NE-N₂H₄ exhibits good properties, such as large Stokes shift (about 125 nm), good selectivity, and low cytotoxicity. This sensing probe NE-N₂H₄ can be operated to detect hydrazine in living HeLa cells. Especially after soaking in probe solution, the thin-layer chromatography (TLC) plate could detect the vapor of hydrazine. Therefore, the probe NE-N₂H₄ might be used to monitor hydrazine in biosamples and environmental problem.

Phthalimide conjugation turns the AIE-active tetraphenylethylene unit non-emissive: its use in turn-on sensing of hydrazine in solution and the solid- and vapour-phase

Hydrazine is a vital precursor used in several pharmaceuticals and pesticide industries and upon exposure can cause severe health hazards. Herein, a new AIEgen, tetraphenylethylene phthalimide (TPE-PMI), is synthesized in a one-step solvent-free mechanochemical approach exploiting the simple condensation between TPE-NH₂ and phthalic anhydride and used for the selective and sensitive detection of hydrazine. TPE-PMI with an AIE-active TPE-moiety is non-emissive in the solid phase by design. Hydrazine performs the cleavage of TPE-PMI in a typical “Gabriel synthesis” pathway to release AIE-active TPE-NH₂ in an aqueous solution to emit blue fluorescence. A gradual rise in fluorescence intensity at 462 nm was due to the increasing hydrazine concentration and TPE-PMI showed a linear relationship with hydrazine in the concentration range from 0.2 to 3 μM. The selectivity study confirmed that the probe is inert to amines, amino acids, metal anions, anions and even common oxidants and reductants. The detection limit is 6.4 ppb which is lower than the US Environmental Protection Agency standard (10 ppb). The practical utilities of TPE-PMI were successfully demonstrated through quantitative detection of hydrazine vapour on solid platforms like paper strips and TLC plates. Furthermore, on-site detection of hydrazine in the solid phase was demonstrated by spiking the soil samples with measured quantities of hydrazine and quantitation through image analysis. This cost-effective sensing tool was successfully utilized in in vitro detection of hydrazine in live HeLa cells.

A new AIE-based fluorimetric probe (TPE-PMI) has been successfully developed utilizing Gabriel reaction for the selective detection of hydrazine in solid, liquid and vapour phases.

Ultra-fast and visual detection of hydrazine hydrate based on a simple coumarin derivative

A cleverish fluorescence probe based on coumarin was developed, exhibiting remarkable color change, strong fluorescence enhancement and fast response when it interacts with hydrazine in water solution. The limit of detection (LOD) is 5.59 × 10^-6 M for ultraviolet analysis and 8.18 × 10^-8 M for fluorescence analysis, respectively. Taking advantage of good sensitivity and short response time, the probe was applied to test hydrazine in water and to observe hydrazine in living cells.

A novel berberine-based colorimetric and fluorimetric probe for hydrazine detection

Hydrazine in water and soil has caused serious diseases for human health. In this work, a simple fluorescent probe (BP) for hydrazine detection was synthesized from berberine. The probe has excellent fluorescence properties and naked-eye detection.

A coumarin chalcone ratiometric fluorescent probe for hydrazine based on deprotection, addition and subsequent cyclization mechanism

A coumarin chalcone derivative with a levulinic acid terminal group acts as a ratiometric fluorescent probe for hydrazine based on deprotection, addition and a subsequent cyclization reaction mechanism.