Zinc nitride quantum dots as an efficient probe for simultaneous fluorescence detection of Cu2+ and Mn2+ ions in water samples

The exceptional ascending heights of graphene (carbon) and boron nitride nanostructures have invited scientists to explore metal nitride nanomaterials. Herein, Zn3N2 quantum dots (QDs) were prepared via a simple hydrothermal route from the reaction between zinc nitrate hexahydrate and ammonia solution that possess efficient strength towards sensing applications of metal ions (Cu2+ and Mn2+). The as-prepared Zn3N2 QDs show bright fluorescence, displaying an emission peak at 408 nm upon excitation at 320 nm, with a quantum yield (QY) of 29.56%. It was noticed that the fluorescence intensity of Zn3N2 QDs linearly decreases with the independent addition of Cu2+ and Mn2+ ions, displaying good linearity in the ranges 2.5-50 µM and 0.05-5 µM with detection limits of 21.77 nM and of 63.82 nM for Cu2+ and Mn2+ ions, respectively. The probe was successfully tested for quantifying Cu2+ and Mn2+ in real samples including river, canal, and tap water, providing good recoveries with a relative standard deviation  < 2%. Furthermore, the masking proposition can successfully eliminate the interference if the two metal ions exist together. It was found that thiourea is efficiently able to mask Cu2+ and selectively quenches Mn2+, and L-cysteine is able to halt the quenching potential of Mn2+ and is selectively able to sense Cu2+. The Zn3N2 QDs provide a simple way for the simultaneous detection of both Cu2+ and Mn2+ ions in environmental samples at low sample preparations requirements.

Manganese dioxide nanosheet-modulated ratiometric fluoroprobe based on carbon quantum dots from okra for selective and sensitive dichlorvos detection in foods

Herein, we developed a ratiometric fluoroprobe by integrating okra-derived carbon quantum dots (CQDs) with amplex red (AR) using manganese dioxide nanosheets (MnO2 NSs) as a medium. Fluorescence intensities (FIs) of CQDs were sharply quenched by MnO2 NSs via an inner-filter effect processes, whereas the FIs of AR were significantly enhanced due to oxidation of AR to AR-ox by the oxidase-mimetic activity of MnO2 NSs. Acetyrylcholinesterase hydrolyzed acetylthiocholine to produce thiocholine, and the decomposition of MnO2 NSs to Mn2+ by thiocholine led to the FI recovery of CQDs, but decreased FIs of AR-ox. Based on the above phenomenon and the inhibitory effect of dichlorvos (DDVP) on acetyrylcholinesterase activity, a novel ratiometric fluoroprobe for DDVP quantification was pioneered. Under optimized conditions, this fluoroprobe gave a wide linear range (4-120 μg/L), low detection limit (1.2 μg/L), and satisfactory fortification recoveries (90.0-110.0%), thereby providing good prospects for routine DDVP monitoring in foods.

Recombinant Organophosphorus acid anhydrolase (OPAA) enzyme-carbon quantum dot (CQDs)-immobilized thin film biosensors for the specific detection of Ethyl Paraoxon and Methyl Parathion in water resources

Organophosphates pesticide (OP) toxicity through water resources is a large concern globally among all the emerging pollutants. Detection of OPs is a challenge which needs to be addressed considering the hazardous effects on the health of human beings. In the current research thin film biosensors of recombinant, Organophosphorus acid anhydrolase (OPAA) enzyme along with carbon quantum dots (CQDs) immobilized in thin films were developed. OPAA-CQDs thin film biosensors were used for the specific detection of two OPs Ethyl Paraoxon (EP) and Methyl Parathion (MP) in river water and household water supply. Recombinant OPAA enzyme was expressed in E. Coli, purified and immobilized on the CQD containing chitosan thin films. The CQDs used for this purpose were developed by a one-pot hydrothermal method from phthalic acid and Tri ethylene diamine. The properties of CQDs, OPAA and thin films were characterized using techniques like XPS, TEM, XRD, enzyme activity and CLSM measurements. Biosensing studies of EP and MP were performed by taking fluorescence measurements using a fiber optic spectrometer. The analytical parameters of biosensing were compared against an estimation carried out using the HPLC method. The biosensing performance indicates that the OPAA-CQDs thin film-based biosensors were able to detect both EP and MP in a range of 0-100 μM having a detection limit of 0.18 ppm/0.69 ppm for EP/MP, respectively with a response time of 5 min. The accuracy of estimation of EP/MP when spiked in water resources lie in the range of ∼100-102% which clearly indicates the OPAA-CQD based thin film biosensors can function as a point-of-use method for the detection of OP pesticides in complex water resources.

Development of Fluorescent Co (II)-Integrated Carbon Dots and Their Application as a Off-On Mesotrione Detection Sensor

A very simple mesotrione-sensing medium with enhanced sensitivity detection limits has been proposed. A renovated hydrothermal method was adopted for synthesizing fluorescent carbon dots from ethylenediamine and glucose using a Teflon-lined simple autoclave in a GC oven. The resultant carbon dots were characterized via TEM, FTIR, UV-vis, particle size distribution, and EDX and evaluated in a fluorimeter as the sensing medium for mesotrione detection. The binding approach of the Co (II)-integrated glucose-bound carbon dots toward mesotrione is selective, making them an effective sensor for the real sample applications, where majority of the coexisting substances showed insignificant interference effect. Formation of the metastable state due to the molecular interaction between carbon dots and Co (II) resulted in fluorescence quenching at 456 nm. Enhancement in the fluorescence intensity occurred when mesotrione was added in the concentration range of 0.2-5.0 μg mL-1, with a limit of detection, limit of quantification, standard deviation, and relative standard deviation of 0.054, 0.164, 0.00082 μg mL-1, and 0.682%, respectively. Mesotrione determination was demonstrated in soil, water, and tomato samples with recoveries in the range of 95.38-104.7%. The selectivity of the sensor was found to be good enough when checked for the complex tomato sample spiked with different pesticides of the triketone family having structural similarities to mesotrione.

A comprehensive review of the spoilage of shrimp and advances in various indicators/sensors for shrimp spoilage monitoring

Shrimp is a popular internationally traded shellfish due to its unique taste, texture, and nutritional value. Shrimp is highly perishable because it has enough free amino acids, high moisture levels, non-nitrogenous compounds used for microbial growth, and melanosis. Shrimp spoilage after death is caused by various reasons, like autolysis (endogenous proteinases actions during shrimp storage), growth of spoilage microorganisms, ATP degradation, melanin formation, and lipid peroxidation. A microbial byproduct, total volatile basic nitrogen, is one of the major reasons for the generation of foul odors from shrimp spoilage. Shrimp freshness monitoring is crucial for market sellers and exporters. Traditional methods for estimating shrimp freshness are expensive and inaccessible to the general public. Sensors are rapid, sensitive, selective, and portable food toxins' detection tools, devoid of expensive instruments, skilled people, sample pretreatment, and a long detection time. This review addresses shrimp spoilage causes. The mechanisms of different stages of shrimp spoilage after death, like rigor mortis, dissolution of rigor mortis, autolysis, and microbial spoilage mechanisms, are discussed. This review highlights the last five years' advances in shrimp freshness detection sensors and indicators like colorimetric pH indicators, fluorescence sensors, electronic noses, and biosensors, their working principles, and their sensitivities. Commercially available indicators and sensors for shrimp spoilage monitoring are also discussed. A review highlighting the applications of the different sensors and indicators for monitoring shrimp freshness is unavailable to date. Challenges and future perspectives in this field are explained at the end.

Synthesis, properties and potential applications of photoluminescent carbon nanoparticles: A review

Photoluminescent-carbon nanoparticles (PL-CNPs) are a new class of materials that received immense interest among researchers due to their distinct characteristics, including photoluminescence, high surface-to-volume ratio, low cost, ease of synthesis, high quantum yield, and biocompatibility. By exploiting these outstanding properties, many studies have been reported on its utility as sensors, photocatalysts, probes for bio-imaging, and optoelectronics applications. From clinical applications to point-of-care test devices, drug loading to tracking of drug delivery, and other research innovations demonstrated PL-CNPs as an emerging material that could substitute conventional approaches. However, some of the PL-CNPs have poor PL properties and selectivity due to the presence of impurities (e.g., molecular fluorophores) and unfavourable surface charges by the passivation molecules, which impede their applications in many fields. To address these issues, many researchers have been paying great attention to developing new PL-CNPs with different composite combinations to achieve high PL properties and selectivity. Herein, we thoroughly discussed the recent development of various synthetic strategies employed to prepare PL-CNPs, doping effects, photostability, biocompatibility, and applications in sensing, bioimaging, and drug delivery fields. Moreover, the review discussed the limitations, future direction, and perspectives of PL-CNPs in possible potential applications.

Selective detection of nitenpyram by silica-supported carbon quantum dots

In this study, a fluorescent sensor of nitrogen-doped carbon quantum dots (N-CQDs) and silica gel hybrid was developed for the quantitative detection of nitenpyram, a toxic neonicotinoid existing in groundwater and/or surface water.The prepared N-CQDs@SiO₂ sensor exhibited remarkable sensing selectivity and sensitivity towards nitenpyram among the four pesticides and six metal ions. A prominent fluorescence quenching of N-CQDs@SiO₂ at 445 nm was observed in the presence of nitenpyram with a linear response range of 0-300.0 mg L^-1 and an estimated limit of detection of 1.53 mg L^-1. The main cause for selective sensing is that nitenpyram absorbs the excitation light of N-CQDs@SiO₂, leading to fluorescence quenching of the sensor through the inner filter effect.

A Review on Carbon Dots: Synthesis, Characterization and Its Application in Optical Sensor for Environmental Monitoring

The development of carbon dots (CDs), either using green or chemical precursors, has inevitably led to their wide range application, from bioimaging to optoelectronic devices. The reported precursors and properties of these CDs have opened new opportunities for the future development of high-quality CDs and applications. Green precursors were classified into fruits, vegetables, flowers, leaves, seeds, stem, crop residues, fungi/bacteria species, and waste products, while the chemical precursors were classified into acid reagents and non-acid reagents. This paper quickly reviews ten years of the synthesis of CDs using green and chemical precursors. The application of CDs as sensing materials in optical sensor techniques for environmental monitoring, including the detection of heavy metal ions, phenol, pesticides, and nitroaromatic explosives, was also discussed in this review. This profound review will offer knowledge for the upcoming community of researchers interested in synthesizing high-quality CDs for various applications.

Detection of Chlorpyrifos Using Bio-Inspired Silver Nanograss

Chlorpyrifos (CPF) is widely used as an organophosphorus insecticide; however, owing to developmental neurotoxicity, genotoxicity, and other adverse effects, it is harmful not only to livestock but also to humans. Therefore, the use of CPF was recently regulated, and its sensitive detection is crucial, as it causes serious toxicity, even in the case of residual pesticides. Because it is hard to detect the chlorpyrifos directly using spectroscopy (especially in SERS) without chemical reagents, we aimed to develop a SERS platform that could detect the chlorpyrifos directly in the water. In this study, we utilized the intrinsic properties of natural lawns that grow randomly and intertwine with each other to have a large surface area to promote photosynthesis. To detect CPF sensitively, we facilitated the rapid fabrication of biomimetic Ag nanograss (Ag-NG) as a surface-enhanced Raman spectroscopy (SERS) substrate using the electrochemical over-deposition method. The efficiency of the SERS method was confirmed through experiments and finite element method (FEM)-based electromagnetic simulations. In addition, the sensitive detection of CPF was enhanced by pretreatment optimization of the application of the SERS technique (limit of detection: 500 nM). The Ag-NG has potential as a SERS platform that could precisely detect organic compounds, as well as various toxic substances.

Recent advances in synthesis and modification of carbon dots for optical sensing of pesticides

Serious threat from pesticide residues to the ecosystem and human health has become a global concern. Developing reliable methods for monitoring pesticides is a world-wide research hotspot. Carbon dots (CDs) with excellent photostability, low toxicity, and good biocompatibility have been regarded as the potential substitutes in fabricating various optical sensors for pesticide detection. Based on the relevant high-quality publications, this paper first summarizes the current state-of-the-art of the synthetic and modification approaches of CDs. Then, a comprehensive overview is given on the recent advances of CDs-based optical sensors for pesticides over the past five years, with a particular focus on photoluminescent, electrochemiluminescent and colorimetric sensors regarding the sensing mechanisms and design principles by integrating with various recognition elements including antibodies, aptamers, enzymes, molecularly imprinted polymers, and some nanoparticles. Novel functions and extended applications of CDs as signal indicators, catalyst, co-reactants, and electrode surface modifiers, in constructing optical sensors are specially highlighted. Beyond an assessment of the performances of the real-world application of these proposed optical sensors, the existing inadequacies and current challenges, as well as future perspectives for pesticide monitoring are discussed in detail. It is hoped to provide powerful insights for the development of novel CDs-based sensing strategies with their wide application in different fields for pesticide supervision.

Development of poly(vinyl alcohol)/chitosan/aloe vera gel electrospun composite nanofibers as a novel sorbent for thin-film micro-extraction of pesticides in water and food samples followed by HPLC-UV analysis

Schematic presentation of applying PVA/CA/CS/AV composite nanofibers as the extraction phase in thin-film micro-extraction (TFME) of six pesticide compounds prior to HPLC-UV analysis.

Preparation of carbon quantum dots/polyaniline nanocomposite: Towards highly sensitive detection of picric acid

Carbon quantum dots/polyaniline (CQDs/PANI) nanocomposite was successfully prepared by in-situ polymerization of aniline. CQDs were synthesized hydrothermally from gelatin with a diameter size of 4.2 nm and a 17% quantum yield. FTIR, UV-vis absorption, fluorescence spectrophotometer, XRD, TEM, XPS and lifetime decay were used to characterize the obtained nanocomposite. The formation of PANI revealed a high quenching effect on CQDs where the TEM images showed that the formed CQDs were greatly embedded in PANI matrix. In this study, CQDs/PANI nanocomposite was used for the detection of picric acid (PA) in the range 0.37-1.42 μM with a low detection limit (LOD) of 0.056 μM. The prepared sensor showed good enhancement and sensitivity towards PA in comparison to pristine CQDs and other nanostructured materials. The mechanism of PA detection has been studied where it was observed that PA is electrostatically interacted to the nanocomposite through - OH group of PA and the protonated PANI salt formed in CQDs/PANI nanocomposite by fluorescence resonance energy transfer applications. The proposed CQDs/PANI sensor was then utilized in real water samples and successfully determined the different amounts of PA spiked into tap water.

Chromium (VI) detection by microbial carbon dots: Microwave synthesis and mechanistic study

Functionalized carbon dots (CDs) derived from Citrobacter freundii bacterial cells were used for selective detection of Cr(VI). A microwave-heating-based green synthesis approach is adopted to produce functionalized CDs from C. freundii bacterial cells (CF-CDs). The reaction was carried out in a 500 W microwave digester at 200°C for 20 min. The supernatant was filtered with a 0.2 µm filter and highly monodisperse CDs were obtained. Inherent functionalization of CF-CDs with nitrogen and oxygen-containing functional groups made them extremely selective toward Cr(VI) with a lower limit of detection of ~1.7 ppm. More importantly, CF-CDs could distinguish between Cr(VI) and Cr(III), which is highly desirable for practical applications. The fabricated sensor had a dual linear response range between 0 and 50 µM and 50-250 µM. The synthesized CDs were inherently functionalized which made them highly selective for Cr(VI) detection. CF-CDs also possess high stability over long storage period. This study reports the facile synthesis and characterization of a highly selective sensor for Cr(VI). As opposed to similar CDs sensors reported for Cr(VI), based on inner-filter effect, CF-CDs exhibit a strong, specific interaction toward Cr(VI), indicated by the large binding constant.

Fate, cytotoxicity and cellular metabolomic impact of ingested nanoscale carbon dots using simulated digestion and a triculture small intestinal epithelial model

Carbon dots (CDs) are a promising material currently being explored in many industrial applications in the biomedical and agri-food areas; however, studies supporting the environmental health risk assessment of CDs are needed. This study focuses on various CD forms including iron (FeCD) and copper (CuCD) doped CDs synthesized using hydrothermal method, their fate in gastrointestinal tract, and their cytotoxicity and potential changes to cellular metabolome in a triculture small intestinal epithelial model. Physicochemical characterization revealed that 75% of Fe in FeCD and 95% of Cu in CuCD were dissolved during digestion. No significant toxic effects were observed for pristine CDs and FeCDs. However, CuCD induced significant dose-dependent toxic effects including decreases in TEER and cell viability, increases in cytotoxicity and ROS production, and alterations in important metabolites, including D-glucose, L-cysteine, uridine, citric acid and multiple fatty acids. These results support the current understanding that pristine CDs are relatively non-toxic and the cytotoxicity is dependent on the doping molecules.

An Overview of the Recent Developments in Carbon Quantum Dots—Promising Nanomaterials for Metal Ion Detection and (Bio)Molecule Sensing

The fluorescent carbon quantum dots (CQDs) represent an emerging subset of carbonaceous nanomaterials, recently becoming a powerful tool for biosensing, bioimaging, and drug and gene delivery. In general, carbon dots are defined as zero-dimensional (0D), spherical-like nanoparticles with <10 nm in size. Their unique chemical, optical, and electronic properties make CQDs versatile materials for a wide spectrum of applications, mainly for the sensing and biomedical purposes. Due to their good biocompatibility, water solubility, and relatively facile modification, these novel materials have attracted tremendous interest in recent years, which is especially important for nanotechnology and nanoscience expertise. The preparation of the biomass-derived CQDs has attracted growing interest recently due to their low-cost, renewable, and green biomass resources, presenting also the variability of possible modification for the enhancement of CQDs’ properties. This review is primarily focused on the recent developments in carbon dots and their application in the sensing of different chemical species within the last five years. Furthermore, special emphasis has been made regarding the green approaches for obtaining CQDs and nanomaterial characterization toward better understanding the mechanisms of photoluminescent behavior and sensing performance. In addition, some of the challenges and future outlooks in CQDs research have been briefly outlined.

A highly sensitive "ON-OFF-ON" dual optical sensor for the detection of Cu(II) ion and triazole pesticides based on novel BODIPY-substituted cavitand

The synthesis with full structural characterization including elemental analysis and 1H, 13C, 11B and 19F NMR, FT-IR and MALDI-TOF spectral data, along with the florescence sensing behavior of a new resorcin[4]arene cavitand 3 bearing multiple BODIPY sites achieved by the Cu-catalyzed azide-alkyne cycloaddition (CuAAC) is being reported. The spatial orientation of multiple BODIPY-1,2,3-triazole arms based on the macrocyclic rigid core is of great interest since the resulting structure has been utilized as a fluorescent chemosensor for numerous metal cations. In particular, a remarkable decrease in the fluorescence emission towards Cu(ii) ions, i.e., "turn-off" response, has been obtained giving rise to an optical sensor for the detection of triazole fungicides, namely tebuconazole, triadimenol, triadimefon, i.e. "turn-on" response. Such a molecular system, hence, can be feasibly applied as a dual optical sensor, i.e. "a turn-on-off-on" system, for dangerous contaminants such as heavy metals and pesticides.

A Comparative Study of Top-Down and Bottom-Up Carbon Nanodots and Their Interaction with Mercury Ions

We report a study of carbon dots produced via bottom-up and top-down routes, carried out through a multi-technique approach based on steady-state fluorescence and absorption, time-resolved fluorescence spectroscopy, Raman spectroscopy, infrared spectroscopy, and atomic force microscopy. Our study focuses on a side-to-side comparison of the fundamental structural and optical properties of the two families of fluorescent nanoparticles, and on their interaction pathways with mercury ions, which we use as a probe of surface emissive chromophores. Comparison between the two families of carbon dots, and between carbon dots subjected to different functionalization procedures, readily identifies a few key structural and optical properties apparently common to all types of carbon dots, but also highlights some critical differences in the optical response and in the microscopic mechanism responsible of the fluorescence. The results also provide suggestions on the most likely interaction sites of mercury ions at the surface of carbon dots and reveal details on mercury-induced fluorescence quenching that can be practically exploited to optimize sensing applications of carbon dots.

Surface adhered fluorescent carbon dots extracted from the harmful diesel soot for sensing Fe(iii) and Hg(ii) ions

A simple cost effective isolation method has been described for the extraction of surface-adhered blue–green fluorescent carbon material from the diesel soot and used them for the selective sensing of Fe(iii) and toxic Hg(ii) metal ions in aqueous medium.

Novel methods for the rapid detection of trace tetracyclines based on the fluorescence behaviours of Maillard reaction fluorescent nanoparticles

The Maillard reaction and its fluorescent products have attracted widespread attention in the field of food safety and biology. Herein, the novel Maillard reaction fluorescent nanoparticles (MRFNs) as a fluorescent probe were synthesized via a “green” method with simple technical processes. In addition, the effects of tetracycline (TC) and chlorotetracycline (CTC) representing certain properties of tetracyclines (TCs) on the fluorescence behaviour of MRFNs were studied, respectively. The present study showed that the fluorescence intensity of MRFNs greatly enhanced with a linear increase in the CTC concentration. However, with the gradual increase in the TC concentration, the intensity of MRFNs tended to significantly decrease linearly. Based on this, novel fluorescence analysis methods for the simple and rapid detection of TC and CTC in water bodies were established, respectively. Significantly, the proposed detection methods were successfully adopted for detecting TC and CTC in some environmental water samples. Besides, the possible mechanisms for TC-induced fluorescence quenching and CTC-induced fluorescence enhancement of MRFNs were also discussed, respectively.

The Maillard reaction and its fluorescent products have attracted widespread attention in the field of food safety and biology.

Green Synthesis of Full-Color Fluorescent Carbon Nanoparticles from Eucalyptus Twigs for Sensing the Synthetic Food Colorant and Bioimaging

Full-color fluorescent carbon nanoparticles (CNPs) are produced by a facile and green hydrothermal method followed by the differential washing technique. Eucalyptus twigs are used as a precursor to synthesize multiemissive light blue, blue, green, and red CNPs. Brilliant Blue FCF (BB) is a widely used synthetic food colorant, which is toxic for the human body, when consumed beyond the permitted limit. Herein, we demonstrate light blue CNPs as a sensor for selective and sensitive detection of BB via a fluorescence quenching mechanism with a limit of detection of 200 nM. Temperature-dependent fluorescence and 1H NMR studies confirmed the mechanism as combined dynamic and static quenching. To demonstrate the practical efficacy of the sensor, BB is effectively detected and estimated in selected food samples procured from the market. Moreover, the biocompatibility of light blue and blue CNPs is examined and confirmed by performing a cytotoxicity assay on MDA-MB-231 cell lines. Subsequently, the cellular imaging study is also carried out to explore the internalization process of the CNPs as a function of concentration. To the best of our knowledge, this is the first time that Eucalyptus twigs, a natural source of high abundance, are used as raw materials and valorized for sensing artificial food color and bioimaging purposes.

Sensors Applied for the Detection of Pesticides and Heavy Metals in Freshwaters

Water is essential for every life living on the planet. However, we are facing a more serious situation such as water pollution since the industrial revolution. Fortunately, many efforts have been done to alleviate/restore water quality in freshwaters. Numerous sensors have been developed to monitor the dynamic change of water quality for ecological, early warning, and protection reasons. In the present review, we briefly introduced the pollution status of two major pollutants, i.e., pesticides and heavy metals, in freshwaters worldwide. Then, we collected data on the sensors applied to detect the two categories of pollutants in freshwaters. Special focuses were given on the sensitivity of sensors indicated by the limit of detection (LOD), sensor types, and applied waterbodies. Our results showed that most of the sensors can be applied for stream and river water. The average LOD was72.53±12.69 ng/ml (n=180) for all pesticides, which is significantly higher than that for heavy metals (65.36±47.51 ng/ml,n=117). However, the LODs of a considerable part of pesticides and heavy metal sensors were higher than the criterion maximum concentration for aquatic life or the maximum contaminant limit concentration for drinking water. For pesticide sensors, the average LODs did not differ among insecticides (63.83±17.42 ng/ml,n=87), herbicides (98.06±23.39 ng/ml,n=71), and fungicides (24.60±14.41 ng/ml,n=22). The LODs that differed among sensor types with biosensors had the highest sensitivity, while electrochemical optical and biooptical sensors showed the lowest sensitivity. The sensitivity of heavy metal sensors varied among heavy metals and sensor types. Most of the sensors were targeted on lead, cadmium, mercury, and copper using electrochemical methods. These results imply that future development of pesticides and heavy metal sensors should (1) enhance the sensitivity to meet the requirements for the protection of aquatic ecosystems and human health and (2) cover more diverse pesticides and heavy metals especially those toxic pollutants that are widely used and frequently been detected in freshwaters (e.g., glyphosate, fungicides, zinc, chromium, and arsenic).

Bis-biphenylacrylonitrile bridged with crown ether chain: a novel fluorescence sensor for Fe3+ in aqueous media

A novel fluorescence sensor for Fe³⁺ in aqueous media was developed and applied for living-cell imaging.