N-P covalent bond regulation of mesoporous carbon-based catalyst for lowered oxygen reduction overpotential and enhanced zinc-air battery performance

Developing sustainable metal-free carbon-based electrocatalysts is essential for the deployment of metal-air batteries such as zinc-air batteries (ZABs), among which doping of heteroatoms has attracted tremendous interest over the past decade. However, the effect of the heteroatom covalent bonds in carbon matrix on catalysis was neglected in most studies. Here, an efficient metal-free oxygen reduction reaction (ORR) catalyst is demonstrated by the N-P bonds anchored carbon (termed N,P-C-1000). The N,P-C-1000 catalyst exhibits superior specific surface area of 1362 m2 g-1 and ORR activity with a half-wave potential of 0.83 V, close to that of 20 wt% Pt/C. Theoretical computations reveal that the p-band center for C-2p orbit in N,P-C-1000 has higher interaction strength with the intermediates, thus reducing the overall reaction energy barrier. The N,P-C-1000 assembled primary ZAB can attain a large peak power density of 121.9 mW cm-2 and a steady discharge platform of ∼1.20 V throughout 120 h. Besides, when served as the cathodic catalyst in a solid-state ZAB, the battery shows flexibility, conspicuous open circuit potential (1.423 V), and high peak power density (85.8 mW cm-2). Our findings offer a strategy to tune the intrinsic structure of carbon-based catalysts for improved electrocatalytic performance and shed light on future catalysts design for energy storage technologies beyond batteries.

Efficient detection of nitric oxide a biomarker associated with COVID19 via N, P co-doped C60 fullerene: a computational study

CONTEXT

Coronavirus (COVID-19) is a novel respiratory viral infection, causing a relatively large number of deaths especially in people who underly lung diseases such as chronic obstructive pulmonary and asthma, and humans are still suffering from the limited testing capacity. In this article, a solution is proposed for the detection of COVID-19 viral infections through the analysis of exhaled breath gasses, i.e., nitric oxide, a prominent biomarker released by respiratory epithelial, as a non-invasive and time-saving approach. Here, we designed a novel and low-cost N and P co-doped C60 fullerene-based breathalyzer for the detection of NO gas exhaled from the respiratory epithelial cells. This breathalyzer shows a quick response to the detection of NO gas by directly converting NO to NO2 without passing any energy barrier (0 kcal/mol activation energy). The recovery time of breathalyzer is very short (0.98 × 103 s), whereas it is highly selective for NO sensing in the mixture of CO2 and H2O gasses. The study provides an idea for the synthesis of low-cost (compared to previously reported Au atom decorated nanostructure and metal-based breathalyzer), efficient, and highly selective N and P co-doped C60 fullerene-based breathalyzer for COVID-19 detection.

METHODS

The geometries of N and P-doped systems and gas molecules are simulated using spin-polarized density functional theory calculations.

Heteroatom Codoped Graphene: The Importance of Nitrogen

Although graphene has exceptional properties, they are not enough to solve the extensive list of pressing world problems. The substitutional doping of graphene using heteroatoms is one of the preferred methods to adjust the physicochemical properties of graphene. Much effort has been made to dope graphene using a single dopant. However, in recent years, substantial efforts have been made to dope graphene using two or more dopants. This review summarizes all the hard work done to synthesize, characterize, and develop new technologies using codoped, tridoped, and quaternary doped graphene. First, I discuss a simple question that has a complicated answer: When can an atom be considered a dopant? Then, I briefly discuss the single atom doped graphene as a starting point for this review's primary objective: codoped or dual-doped graphene. I extend the discussion to include tridoped and quaternary doped graphene. I review most of the systems that have been synthesized or studied theoretically and the areas in which they have been used to develop new technologies. Finally, I discuss the challenges and prospects that will shape the future of this fascinating field. It will be shown that most of the graphene systems that have been reported involve the use of nitrogen, and much effort is needed to develop codoped graphene systems that do not rely on the stabilizing effects of nitrogen. I expect that this review will contribute to introducing more researchers to this fascinating field and enlarge the list of codoped graphene systems that have been synthesized.

Theoretical study of metal-free catalytic for catalyzing CO-oxidation with a synergistic effect on P and N co-doped graphene

P and N co-doped graphene (PN_xC_y-G with x = 1, 2, 3 and y = 0, 1, 2) is designed to enhance graphene reactivity with a synergistic effect of the P and N atoms for the CO oxidation reaction, focusing on the influence of the N dopant concentration on graphene. The calculated results indicate that increasing two or three coordinated N to P can facilitate charge transfer from the surface onto O₂ molecules. However, the adsorbed O₂ molecule breaks apart on PN₃-G surface, affecting CO oxidation performance. Furthermore, PN₂C₁-G exhibits excellent catalytic activity towards the oxidation of CO via the ER mechanism, which catalyzes CO oxidation with the rate-determining step of only 0.26 eV for the first and 0.25 eV for the second oxidation at 0 K. Additionally, the catalytic oxidation of PN₂C₁-G via Eley–Rideal mechanism prefers to occur at room temperature (298.15 K), with a rate-determining step of 0.77 eV. The reaction rates at 298.15 K is calculated to be 5.36 × 10¹⁶ mol s^–1. The rate constants are obtained according to harmonic transition state theory, which could be supportive for catalytic oxidation of CO on the experiment.

Multi-heteroatom-doped carbocatalyst as peroxymonosulfate and peroxydisulfate activator for water purification: A critical review

Catalytic activation of peroxymonosulfate (PMS) and peroxydisulfate (PDS) (or collectively known as persulfate, PS) using carbocatalyst is increasingly gaining attention as a promising technology for sustainable recalcitrant pollutant removal in water. Single heteroatom doping using either N, S, B or P is widely used to enhance the performance of the carbocatalyst for PS activation. However, the performance enhancement from single heteroatom doping is limited by the type of heteroatom used. To further enhance the performance of the carbocatalyst beyond the limit of single heteroatom doping, multi-heteroatom doping can be conducted. This review aims to provide a state-of-the-art overview on the development of multi-heteroatom-doped carbocatalyst for PS activation. The potential synergistic and antagonistic interactions of various heteroatoms including N and B, N and S, N and P, and N and halogen for PS activation are evaluated. Thereafter, the preparation strategies to develop multi-heteroatom-doped carbocatalyst including one-step and multi-step preparation approaches along with the characterization techniques are discussed. Evidence and summary of the performance of multi-heteroatom-doped carbocatalyst for various recalcitrant pollutants removal via PS activation are also provided. Finally, the prospects of employing multi-heteroatom-doped carbocatalyst including the need to study the correlation between different heteroatom combination, surface moiety type, and amount of dopant with the PS activation mechanism, identifying the best heteroatom combination, improving the durability of the carbocatalyst, evaluating the feasibility for full-scale application, developing low-cost multi-heteroatom-doped carbocatalyst, and assessing the environmental impact are also briefly discussed.

Engineering atomic Fe–N–C with adjacent FeP nanoparticles in N,P-doped carbon for synergetic oxygen reduction and zinc–air battery

FeP-900 doped with transition metals (FeP and Fe–N–C) and heteroatoms (N,P) was prepared via pyrolysis of a conjugated microporous polymer constituted by Fe–phthalocyanine and cyclotriphosphazene, in which FeP was wrapped in N,P-rich carbon matrix.

First Principle Studies to Tailor Graphene Through Synergistic Effect as a Highly Efficient Electrocatalyst for Oxygen Evolution Reaction

The Oxygen Evolution Reaction (OER) is one of the major roadblocks for electrocatalytic oxidation of water (water splitting) and for designing efficient metal-air batteries. Herein, we present a comprehensive study to design graphene based efficient electrocatalyst, modified by doping with main group elements Al, Si, P, S and co-doping with B and N, for OER using DFT computations. Four elementary steps in the OER reaction have been traced, free energy change for each elementary step was calculated considering thermodynamic corrections. Out of all the doped models, S doped graphene shows maximum efficiency that was further enhanced by adjusting the concentration of codopants B and N around the active dopant site. Our results show that synergy between codopants B and N and dopant S atom leads to high electrocatalytic efficiency of modified graphene towards OER and brings down the overpotential to as low as 0.44 V.

Advanced non-noble materials in bifunctional catalysts for ORR and OER toward aqueous metal-air batteries

The catalyst in the oxygen electrode is the core component of the aqueous metal-air battery, which plays a vital role in the determination of the open circuit potential, energy density, and cycle life of the battery. For rechargeable aqueous metal-air batteries, the catalyst should have both good oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) catalytic performance. Compared with precious metal catalysts, non-precious metal materials have more advantages in terms of abundant resource reserves and low prices. Over the past few years, great efforts have been made in the development of non-precious metal bifunctional catalysts. This review selectively evaluates the advantages, disadvantages and development status of recent advanced materials including pure carbon materials, carbon-based metal materials and carbon-free materials as bifunctional oxygen catalysts. Preliminary improvement strategies are formulated to make up for the deficiency of each material. The development prospects and challenges facing bifunctional catalysts in the future are also discussed.