Flame-Resistant Inorganic Films by Self-Assembly of Clay Nanotubes and their Conversion to Geopolymer for CO2 Capture

Self-assembling of very long natural clay nanotubes represents a powerful strategy to fabricate thermo-stable inorganic thin films suitable for environmental applications. In this work, self-standing films with variable thicknesses (from 60 to 300 µm) are prepared by the entanglement of 20-30 µm length Patch halloysite clay nanotubes (PT_Hal), which interconnect into fibrosus structures. The thickness of the films is crucial to confer specific properties like transparency, mechanical resistance, and water uptake. Despite its completely inorganic composition, the thickest nanoclay film possesses elasticity comparable with polymeric materials as evidenced by its Young's modulus (ca. 1710 MPa). All PT_Hal-based films are fire resistant and stable under high temperature conditions preventing flame propagation. After their direct flame exposure, produced films do not show neither deterioration effects nor macroscopic alterations. PT_Hal films are employed as precursors for the development of functional materials by alkaline activation and thermal treatment, which generate highly porous geopolymers or ceramics with a compact morphology. Due to its high porosity, geopolymer can be promising for CO2 capture. As compared to the corresponding inorganic film, the CO2 adsorption efficiency is doubled for the halloysite geopolymeric materials highlighting their potential use as a sorbent.

Mechanism of bacteriophage-induced vaterite formation

This study shows how bacterial viruses (bacteriophages, phages) interact with calcium carbonate during precipitation from aqueous solution. Using electron microscopy, epifluorescence microscopy, X-ray diffraction, and image analysis, we demonstrate that bacteriophages can strongly influence the formation of the vaterite phase. Importantly, bacteriophages may selectively bind both amorphous calcium carbonate (ACC) and vaterite, and indirectly affect the formation of structural defects in calcite crystallites. Consequently, the surface properties of calcium carbonate phases precipitating in the presence of viruses may exhibit different characteristics. These findings may have significant implications in determining the role of bacterial viruses in modern microbially-rich carbonate sedimentary environments, as well as in biomedical technologies. Finally, the phage-vaterite system, as a biocompatible material, may serve as a basis for the development of promising drug delivery carriers.

Influence of natural polysaccharides on the morphology and properties of hybrid vaterite microcrystals

Co-precipitation of biopolymers into calcium carbonate crystals changes their physicochemical and biological properties. This work studies hybrid microcrystals of vaterite obtained in the presence of natural polysaccharides, as carriers for the delivery of proteins and enzymes. Hybrid microcrystals with dextran sulfate, chondroitin sulfate, heparin, fucoidan, and pectin were obtained and compared. The impact of polysaccharides on the morphology (particle diameter, surface area, nanocrystallite and pore size), polysaccharide content and surface charge of hybrid microcrystals was studied. Only microcrystals with fucoidan and heparin exhibited antioxidant activity against •ОН radical. The surface charge and pore size of the hybrid microcrystals affected the sorption of albumin, catalase, chymotrypsin, mucin. A decrease in the catalytic constant and Michaelis constant was observed for catalase sorbed on the hybrid crystals. The biocompatibility of microcrystals depended on the nature of the included polysaccharide: crystals with sulfated polysaccharides increased blood plasma coagulation but not platelet aggregation, and crystals with dextran sulfate had the greatest cytotoxicity against HT-29 cells but not erythrocytes. Hybrid microcrystals with all polysaccharides except chondroitin sulfate reduced erythrocyte lysis in vitro compared with vaterite crystals. The obtained results enable to create novel carriers based on hybrid vaterite crystals with polysaccharides, beneficial for the delivery of protein drugs.

Functionalized Calcium Carbonate-Based Microparticles as a Versatile Tool for Targeted Drug Delivery and Cancer Treatment

Nano- and microparticles are increasingly widely used in biomedical research and applications, particularly as specific labels and targeted delivery vehicles. Silica has long been considered the best material for such vehicles, but it has some disadvantages limiting its potential, such as the proneness of silica-based carriers to spontaneous drug release. Calcium carbonate (CaCO3) is an emerging alternative, being an easily available, cost-effective, and biocompatible material with high porosity and surface reactivity, which makes it an attractive choice for targeted drug delivery. CaCO3 particles are used in this field in the form of either bare CaCO3 microbeads or core/shell microparticles representing polymer-coated CaCO3 cores. In addition, they serve as removable templates for obtaining hollow polymer microcapsules. Each of these types of particles has its specific advantages in terms of biomedical applications. CaCO3 microbeads are primarily used due to their capacity for carrying pharmaceutics, whereas core/shell systems ensure better protection of the drug-loaded core from the environment. Hollow polymer capsules are particularly attractive because they can encapsulate large amounts of pharmaceutical agents and can be so designed as to release their contents in the target site in response to specific stimuli. This review focuses first on the chemistry of the CaCO3 cores, core/shell microbeads, and polymer microcapsules. Then, systems using these structures for the delivery of therapeutic agents, including drugs, proteins, and DNA, are outlined. The results of the systematic analysis of available data are presented. They show that the encapsulation of various therapeutic agents in CaCO3-based microbeads or polymer microcapsules is a promising technique of drug delivery, especially in cancer therapy, enhancing drug bioavailability and specific targeting of cancer cells while reducing side effects. To date, research in CaCO3-based microparticles and polymer microcapsules assembled on CaCO3 templates has mainly dealt with their properties in vitro, whereas their in vivo behavior still remains poorly studied. However, the enormous potential of these highly biocompatible carriers for in vivo applications is undoubted. This last issue is addressed in depth in the Conclusions and Outlook sections of the review.

Advancements in Hybrid Cellulose-Based Films: Innovations and Applications in 2D Nano-Delivery Systems

This review paper delves into the realm of hybrid cellulose-based materials and their applications in 2D nano-delivery systems. Cellulose, recognized for its biocompatibility, versatility, and renewability, serves as the core matrix for these nanomaterials. The paper offers a comprehensive overview of the latest advancements in the creation, analysis, and application of these materials, emphasizing their significance in nanotechnology and biomedical domains. It further illuminates the integration of nanomaterials and advanced synthesis techniques that have significantly improved the mechanical, chemical, and biological properties of hybrid cellulose-based materials.

Size Control of Biomimetic Curved-Edge Vaterite with Chiral Toroid Morphology via Sonochemical Synthesis

The metastable vaterite polymorph of calcium carbonate (CaCO3) holds significant practical importance, particularly in regenerative medicine, drug delivery, and various personal care products. Controlling the size and morphology of vaterite particles is crucial for biomedical applications. This study explored the synergistic effect of ultrasonic (US) irradiation and acidic amino acids on CaCO3 synthesis, specifically the size, dispersity, and crystallographic phase of curved-edge vaterite with chiral toroids (chiral-curved vaterite). We employed 40 kHz US irradiation and introduced L- or D-aspartic acid as an additive for the formation of spheroidal chiral-curved vaterite in an aqueous solution of CaCl2 and Na2CO3 at 20 ± 1 °C. Chiral-curved vaterites precipitated through mechanical stirring (without US irradiation) exhibited a particle size of approximately 15 μm, whereas those formed under US irradiation were approximately 6 μm in size and retained their chiral topoid morphology. When a fluorescent dye was used for the analysis of loading efficiency, the size-reduced vaterites with chiral morphology, produced through US irradiation, exhibited a larger loading efficiency than the vaterites produced without US irradiation. These results hold significant value for the preparation of biomimetic chiral-curved CaCO3, specifically size-reduced vaterites, as versatile biomaterials for material filling, drug delivery, and bone regeneration.

Statistical 3D morphology characterization of vaterite microspheres produced by engineered Escherichia coli

Hollow vaterite microspheres are important materials for biomedical applications such as drug delivery and regenerative medicine owing to their biocompatibility, high specific surface area, and ability to encapsulate a large number of bioactive molecules and compounds. We demonstrated that hollow vaterite microspheres are produced by an Escherichia coli strain engineered with a urease gene cluster from the ureolytic bacteria Sporosarcina pasteurii in the presence of bovine serum albumin. We characterized the 3D nanoscale morphology of five biogenic hollow vaterite microspheres using 3D high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM) tomography. Using automated high-throughput HAADF-STEM imaging across several sample tilt orientations, we show that the microspheres evolved from a smaller more ellipsoidal shape to a larger more spherical shape while the internal hollow core increased in size and remained relatively spherical, indicating that the microspheres produced by this engineered strain likely do not contain the bacteria. The statistical 3D morphology information demonstrates the potential for using biogenic calcium carbonate mineralization to produce hollow vaterite microspheres with controlled morphologies. STATEMENT OF SIGNIFICANCE: The nanoscale 3D structures of biomaterials determine their physical, chemical, and biological properties, however significant efforts are required to obtain a statistical understanding of the internal 3D morphology of materials without damaging the structures. In this study, we developed a non-destructive, automated technique that allows us to understand the nanoscale 3D morphology of many unique hollow vaterite microspheres beyond the spectroscopy methods that lack local information and microscopy methods that cannot interrogate the full 3D structure. The method allowed us to quantitatively correlate the external diameters and aspect ratios of vaterite microspheres with their hollow internal structures at the nanoscale. This work demonstrates the opportunity to use automated transmission electron microscopy to characterize nanoscale 3D morphologies of many biomaterials and validate the chemical and biological functionality of these materials.

Formulation and Biodegradation of Surface-Supported Biopolymer-Based Microgels Formed via Hard Templating onto Vaterite CaCO3 Crystals

In recent decades, there has been increased attention to the role of layer-by-layer assembled bio-polymer 3D structures (capsules, beads, and microgels) for biomedical applications. Such free-standing multilayer structures are formed via hard templating onto sacrificial cores such as vaterite CaCO3 crystals. Immobilization of these structures onto solid surfaces (e.g., implants and catheters) opens the way for the formulation of advanced bio-coating with a patterned surface. However, the immobilization step is challenging. Multiple approaches based mainly on covalent binding have been developed to localize these multilayer 3D structures at the surface. This work reports a novel strategy to formulate multilayer surface-supported microgels (ss-MG) directly on the surface via hard templating onto ss-CaCO3 pre-grown onto the surface via the direct mixing of Na2CO3 and CaCl2 precursor solutions. ss-MGs were fabricated using biopolymers: polylysine (PLL) as polycation and three polyanions-hyaluronic acid (HA), heparin sulfate (HS), and alginate (ALG). ss-MG biodegradation was examined by employing the enzyme trypsin. Our studies indicate that the adhesion of the ss-MG to the surface and its formation yield directly correlate with the mobility of biopolymers in the ss-MG, which decreases in the sequence of ALG > HA > HS-based ss-MGs. The adhesion of HS-based ss-MGs is only possible via heating during their formation. Dextran-loading increases ss-MG formation yield while reducing ss-MG shrinking. ss-MGs with higher polymer mobility possess slower biodegradation rates, which is likely due to diffusion limitations for the enzyme in more compact annealed ss-MGs. These findings provide valuable insights into the mechanisms underlying the formation and biodegradation of surface-supported biopolymer structures.

Polyethylenimine-CO2 adduct templated CaCO3 nanoparticles as anticancer drug carrier

Background

Due to their porous structure and capability to degrade under acidic conditions, CaCO3 nanoparticles in vaterite form can be used as carriers to effectively deliver drugs to low-pH sites such as tumors. The usually used intravenous administration requires long-term vaterite phase and colloidal stability for storage and blood circulation. While passive accumulation in tumors can be achieved via the enhanced permeation and retention effect, active accumulation requires reactive groups on vaterite nanoparticles to conjugate targeting molecules. Both requirements are hard to achieve in one simple and economical vaterite formulation. Herein, we used polyethylenimine (PEI)-based CO2 adduct as both a CO2 source and a template for vaterite mineralization to generate PEI-CO2@CaCO3 colloidal particles, with reactive amino groups from the PEI template.

Results

The obtained nanoparticles with a hydrodynamic diameter of 200–300 nm have a vaterite phase and colloidal stability in an aqueous solution for over 8 months. These nanoparticles could effectively load anticancer drug doxorubicin via coprecipitation and be surface-modified with polyethylene glycol (PEG) and folic acid for long-term blood circulation and tumor targeting purposes, respectively. After being endocytosed, the PEI-CO2 adduct accelerates the dissolution of drug-loaded nanoparticles to generate CO2 bubbles to break the lysosomes, leading to rapid doxorubicin delivery inside tumor cells. The degradation of PEI-CO2 in the CaCO3 nanoparticles could also release PEI and CO2 and may contribute to the disruption of normal cellular functions. As a result, the drug-loaded PEI-CO2@CaCO3 nanoparticles strongly suppressed tumor growth in mice with HeLa tumor xenografts.

Conclusions

A new and effective vaterite drug carrier for anticancer therapy has been developed using PEI-CO2 adduct as both a CO2 source and vaterite template for CaCO3 mineralization. This delivery system illustrates an application of CO2 generation materials in drug delivery and has the potential for further development.

Characterization and Exploration of Placket-Burman-Designed Porous Calcium Carbonate (Vaterite) Microparticles

The objective of the research was to identify significant variables that impact the porosity-related properties of CaCO3 particles. The Placket-Burman design was employed to screen multiple variables, including pH, molar concentrations of calcium chloride and sodium carbonate, temperature, concentration of Gelucire 44/14, Cremophor RH40, Solutol HS15, Labrasol, mixing rate, reaction time, and order of addition. The response variables were surface area, pore radius, and pore volume. Influential methodologies such as XRD, FTIR, Raman spectroscopy, and TGA were utilized to validate the precipitate type. The BET surface area ranged from 1.5 to 16.14 m2/g, while the pore radius varied from 2.62 to 6.68 nm, and the pore volume exhibited a range of 2.43 to 37.97 cc/gm. Vaterite structures with spherical mesoporous characteristics were observed at high pH, whereas calcite formations occurred at low pH. The order of addition impacted the surface area but did not affect the pore volume. To maximize the surface area, a lower reaction time and molar concentrations of sodium carbonate were found to be advantageous. The pore radius was influenced by the pH, surfactants, and reaction conditions. The sediments were categorized based on the percentage of vaterite formation. The instrumental techniques effectively characterized the precipitates and provided a valuable complementary analysis.

Exploiting Benefits of Vaterite Metastability to Design Degradable Systems for Biomedical Applications

The widespread application of calcium carbonate is determined by its high availability in nature and simplicity of synthesis in laboratory conditions. Moreover, calcium carbonate possesses highly attractive physicochemical properties that make it suitable for a wide range of biomedical applications. This review provides a conclusive analysis of the results on using the tunable vaterite metastability in the development of biodegradable drug delivery systems and therapeutic vehicles with a controlled and sustained release of the incorporated cargo. This manuscript highlights the nuances of vaterite recrystallization to non-porous calcite, dissolution at acidic pH, biodegradation at in vivo conditions and control over these processes. This review outlines the main benefits of vaterite instability for the controlled liberation of the encapsulated molecules for the development of biodegradable natural and synthetic polymeric materials for biomedical purposes.

Halloysite Nanotube as a Functional Material for Active Food Packaging Application: A Review

Halloysite nanotubes (HNTs) are naturally occurring nanomaterials with a tubular shape and high aspect ratio, a promising functional additive for active food packaging applications. HNTs have been shown to possess unique properties such as high surface area, thermal stability, and biocompatibility, making them attractive for active food packaging materials. This review summarizes recent research on the use of HNTs as functional additives in active food packaging applications, including antimicrobial packaging, ethylene scavenging packaging, moisture, and gas barrier packaging. The potential benefits and challenges associated with the incorporation of HNTs into food packaging materials are discussed. The various modification methods, such as the physical, chemical, biological, and electrostatic methods, along with their impact on the properties of HNTs, are discussed. The advantages and challenges associated with each modification approach are also evaluated. Overall, the modification of HNTs has opened new possibilities for the development of advanced packaging materials with improved performance for various functional food packaging materials with enhanced properties and extended shelf life.

Nanocomposites based on halloysite nanotubes and sulphated galactan from red seaweed Gloiopeltis: Properties and delivery capacity of sodium diclofenac

We developed novel composite films based on biocompatible components, such as halloysite clay nanotubes and sulphated galactan (Funori) from red seaweed Gloiopeltis. The filling of the nanotubes within the sulphated galactan matrix was carried out by a green protocol (aqueous casting method) assuring that Funori/halloysite nanocomposites can be totally considered as sustainable materials. The amount of halloysite in the composites was systematically changed to explore the effects of the nanofiller concentration on the mesoscopic properties of the films. We observed that the halloysite content significantly affects the initial water contact angle and the light attenuation coefficient of the Funori based films. These results were interpreted according to SEM images, which showed that the surface morphologies of the nanocomposites depend on the halloysite amounts filled within the polymeric matrix. The mechanical characterization of the nanocomposites was conducted by tensile experiments performed using a linear stress ramp. Moreover, tensile tests were conducted in oscillatory regime at variable temperature to investigate the viscoelastic properties of the nanocomposites. Finally, we filled the biopolymeric matrix with halloysite nanotubes containing sodium diclofenac. The drug release kinetics from the nanocomposites at variable halloysite contents were studied to evaluate their suitability as oral dissolving films for pharmaceutical applications.

Spontaneous shrinkage drives macromolecule encapsulation into layer-by-layer assembled biopolymer microgels

HYPOTHESIS

Recently, the anomalous shrinkage of surface-supported hyaluronate/poly-l-lysine (HA/PLL) microgels (µ-gels), which exceeds that reported for any other multilayer-based systems, has been reported [1]. The current study investigates the capability of these unique µ-gels for the encapsulation and retention of macromolecules, and proposes the shrinkage-driven assembly of biopolymer-based µ-gels as a novel tool for one-step surface biofunctionalization.

EXPERIMENTS

A set of dextrans (DEX) and their charged derivatives - carboxymethyl (CM)-DEX and diethylaminoethyl (DEAE)-DEX - has been utilized to evaluate the effects of macromolecular mass and net charge on µ-gel shrinkage and macromolecule entrapment. µ-gels formation on the surface of silicone catheters exemplifies their potential to tailor biointerfaces.

FINDINGS

Shrinkage-driven µ-gel formation strongly depends on the net charge and mass content of encapsulated macromolecules. Inclusion of neutral DEX decreases the degree of shrinkage several times, whilst charged DEXs adopt to the backbone of oppositely charged polyelectrolytes, resulting in shrinkage comparable to that of non-loaded µ-gels. Retention of CM-DEX in µ-gels is significantly higher compared to DEAE-DEX. These insights into the mechanisms of macromolecular entrapment into biopolymer-based µ-gels promotes fundamental understanding of molecular dynamics within the multilayer assemblies. Organization of biodegradable µ-gels at biomaterial surfaces opens avenues for their further exploitation in a diverse array of bioapplications.

Novel carboxymethyl cellulose-halloysite-polyethylene glycol nanocomposite for improved 5-FU delivery

Drug nano-carriers are crucial for achieving targeted treatment against cancer disorders with minimal side effects. In this study, a pH-responsive nanocomposite based on halloysite nanotube (HNT) coated with carboxymethyl cellulose (CMC)/polyethylene glycol (PEG) hydrogel for controlled delivery of 5-Fluorouracil (5-FU), a hydrophobic chemotherapy drug prescribed for different types of cancers was synthesized for the first time using the water-in-oil-in-water (W/O/W) technique. The developed CMC/PEG/HNT/5-FU nanocomposite was characterized by dynamic light scattering (DLS), zeta potential, Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and Field emission scanning electron microscope (FE-SEM) to get information about the particle size, surface charge, interactions between functional groups, crystalline structure and morphology, respectively. High efficiencies in terms of drug entrapment and loading (46 % and 87 %, respectively) were attained. In-vitro drug release results revealed an improved and sustained 5-FU delivery in an acid environment compared to the physiological medium, corroborating the pH-sensitivity of the developed nano-carrier. Flow cytometry and MTT assays demonstrated that the 5-FU loaded nanocomposite had considerable cytotoxicity on MCF-7 breast cancer cells while it is not toxic against L929 fibroblast cells. The nanocomposite synthesized herein could serve as a platform for the pH-sensitive release of anti-cancer drugs.

New Carbonate-Based Materials and Study of Cytotoxic Capacity in Cancer Cells

Calcium carbonate, one of the most commonly found biominerals produced by organisms, has shown great potential for the development of systems with biological applications due to its excellent biocompatibility, biodegradability, and simple chemical composition. Here, we focus on the synthesis of various carbonate-based materials with vaterite phase control and their subsequent functionalization for applications in treating glioblastoma, one of the most limiting tumors currently without effective treatments. The incorporation of l-cysteine into the systems increased cell selectivity while the incorporation of manganese supplied the materials with cytotoxic capacity. Extensive characterization of the systems by infrared spectroscopy, ultraviolet-visible spectroscopy, X-ray diffraction, X-ray fluorescence, and transmission electron microscopy confirmed the incorporation of the different fragments causing selectivity and cytotoxicity to the systems. To verify their therapeutic activity, the vaterite-based materials were tested in the CT2A cell line (murine glioma) and compared to SKBR3 (breast cancer) and HEK-293T (human kidney) cell lines. These studies on the cytotoxicity of the materials have shown promising results that can encourage future in vivo studies in glioblastoma models.

Recent Advances of Calcium Carbonate Nanoparticles for Biomedical Applications

Calcium carbonate nanoparticles have been widely used in biomedicine due to their biocompatibility and biodegradability. Recently, calcium carbonate nanoparticles are largely integrated with imaging contrast and therapeutic agents for various imaging and therapeutic approaches. In this review, we first described the advantages and preparation methods of calcium carbonate nanoparticles, then the state-of-the-art progress of calcium carbonate nanoparticles in diagnosis, treatment and theranostics was summarized. Finally, we discussed the challenges and recommendations for future studies of the calcium carbonate nanoparticles.

Nano-Clays for Cancer Therapy: State-of-the Art and Future Perspectives

To date, cancer continues to be one of the deadliest diseases. Current therapies are often ineffective, leading to the urgency to develop new therapeutic strategies to improve treatments. Conventional chemotherapeutics are characterized by a reduced therapeutic efficacy, as well as them being responsible for important undesirable side effects linked to their non-specific toxicity. In this context, natural nanomaterials such as clayey mineral nanostructures of various shapes (flat, tubular, spherical and fibrous) with adjustable physico-chemical and morphological characteristics are emerging as systems with extraordinary potential for the delivery of different therapeutic agents to tumor sites. Thanks to their submicron size, high specific surface area, high adsorption capacity, chemical inertia and multilayer organization of 0.7 to 1 nm-thick sheets, they have aroused considerable interest among the scientific community as nano systems that are highly biocompatible in cancer therapy. In oncology, the nano-clays usually studied are halloysite, bentonite, laponite, kaolinite, montmorillonite and sepiolite. These are multilayered minerals that can act as nanocarriers (with a drug load generally between 1 and 10% by weight) for improved stabilization, efficient transport and the sustained and controlled release of a wide variety of anticancer agents. In particular, halloysite, montmorillonite and kaolinite are used to improve the dissolution of therapeutic agents and to delay and/or direct their release. In this review, we will examine and expose to the scientific community the extraordinary potential of nano-clays as unique crystalline systems in the treatment of cancer.

A Novel Efficient Piscine Oral Nano-Vaccine Delivery System: Modified Halloysite Nanotubes (HNTs) Preventing Streptococcosis Disease in Tilapia (Oreochromis sp.)

Generally, the injection method is recommended as the best efficient method for vaccine applications in fish. However, labor-intensive and difficult injection for certain fish sizes is always considered as a limitation to aquatic animals. To demonstrate the effectiveness of a novel oral delivery system for the piscine vaccine with nano-delivery made from nano clay, halloysite nanotubes (HNTs) and their modified forms were loaded with killed vaccines, and we determined the ability of the system in releasing vaccines in a mimic digestive system. The efficaciousness of the oral piscine vaccine nano-delivery system was evaluated for its level of antibody production and for the level of disease prevention in tilapia. Herein, unmodified HNTs (H) and modified HNTs [HNT-Chitosan (HC), HNT-APTES (HA) and HNT-APTES-Chitosan (HAC)] successfully harbored streptococcal bivalent vaccine with inactivated S. agalactiae, designated as HF, HAF, HCF and HACF. The releasing of the loading antigens in the mimic digestive tract demonstrated a diverse pattern of protein releasing depending on the types of HNTs. Remarkably, HCF could properly release loading antigens with relevance to the increasing pH buffer. The oral vaccines revealed the greatest elevation of specific antibodies to S. agalactiae serotype Ia in HCF orally administered fish and to some extent in serotype III. The efficacy of streptococcal disease protection was determined by continually feeding with HF-, HAF-, HCF- and HACF-coated feed pellets for 7 days in the 1st and 3rd week. HCF showed significant RPS (75.00 ± 10.83%) among the other tested groups. Interestingly, the HCF-treated group exhibited noticeable efficacy similar to the bivalent-vaccine-injected group (RPS 81.25 ± 0.00%). This novel nano-delivery system for the fish vaccine was successfully developed and exhibited appropriated immune stimulation and promised disease prevention through oral administration. This delivery system can greatly support animals' immune stimulation, which conquers the limitation in vaccine applications in aquaculture systems. Moreover, this delivery system can be applied to carrying diverse types of biologics, including DNA, RNA and subunit protein vaccines.

Calcium carbonate vaterite particles for drug delivery: Advances and challenges

The recent successful application of lipid-based nanoparticles as delivery vehicles in COVID-19 vaccines demonstrated the superior potential of nanoparticle-based technology for targeted drug delivery in biomedicine. Among novel, rapidly advancing delivery platforms, the inorganic nano/microparticles gradually reach new heights and attract well-deserved attention among scientists and clinicians. Calcium carbonate in its vaterite form is used as a biocompatible carrier for a progressively increasing number of biomedical applications. Its growing popularity is conferred by beneficial porosity of particles, high mechanical stability, biodegradability under certain physiological conditions, ability to provide a continuous steady release of bioactives, preferential safety profile, and low cost, which make calcium carbonate a suitable entity of highly efficacious formulations for controlled drug delivery and release. The focal point of the current review is the success of the recent vaterite applications in the delivery of various diagnostics and therapeutic drugs. The manuscript highlights the nuances of drug loading in vaterite particles, connecting it with particle morphology, size, and charge of the loaded molecules, payload concentration, mono- or multiple drug loading. The manuscript also depicts recent successful methods of increasing the loading capacity developed for vaterite carriers. In addition, the review describes the various administration routes for vaterite particles with bioactive payloads, which were reported in recent years. Special attention is given to the multi-drug-loaded vaterite particles ("molecular cocktails") and reports on their successful delivery in vitro and in vivo.

Hybrid Mucin-Vaterite Microspheres for Delivery of Proteolytic Enzyme Chymotrypsin

While the enteral delivery of proteolytic enzymes is widely established for combating many diseases as an alternative to antibiotic treatment, their local delivery only emerges as administration route enabling sustained release in a controlled manner on site. The latest requires the development of drug delivery systems suitable for encapsulation and preservation of enzymatic proteolytic activity. This study proposes hybrid microspheres made of mucin and biodegradable porous crystals of calcium carbonate (CC) as the carriers for chymotrypsin (CTR) delivery. CTR was impregnated into CC and hybrid CC/mucin (CCM) microspheres by means of sorption without any chemical modification. The loading of the CC with mucin enhances CTR retention on hybrid microspheres (adsorption capacity of ca 8.7 versus 4.7 mg/g), recharging crystal surface due to the presence of mucin and diminishing the average pore diameter of the crystals from 25 to 8 nm. Mucin also retards recrystallization of vaterite into non-porous calcite improving stability of CCM microspheres upon storage. Proteolytic activity of CTR is preserved in both CC and CCM microspheres, being pH dependent. Temperature-induced inactivation of CTR significantly diminishes by CTR encapsulation into CC and CCM microspheres. Altogether, these findings indicate promises of hybrid mucin-vaterite microspheres for mucosal application of proteases. This article is protected by copyright. All rights reserved.

Modification of Surfaces with Vaterite CaCO3 Particles

Former studies have demonstrated a strong interest toward the crystallization of CaCO3 polymorphs in solution. Nowadays, CaCO3 crystallization on solid surfaces is extensively being studied using biomolecules as substrates for the control of the growth aiming at various applications of CaCO3. Calcium carbonate exists in an amorphous state, as three anhydrous polymorphs (aragonite, calcite and vaterite), and as two hydrated polymorphs (monohydrocalcite and ikaite). The vaterite polymorph is considered as one of the most attractive forms due to its large surface area, biocompatibility, mesoporous nature, and other features. Based on physical or chemical immobilization approaches, vaterite can be grown directly on solid surfaces using various (bio)molecules, including synthetic polymers, biomacromolecules such as proteins and peptides, carbohydrates, fibers, extracellular matrix components, and even biological cells such as bacteria. Herein, the progress on the modification of solid surfaces by vaterite CaCO3 crystals is reviewed, focusing on main findings and the mechanism of vaterite growth initiated by various substances mentioned above, as well as the discussion of the applications of such modified surfaces.

Halloysite nanotubes as nanoreactors for heterogeneous micellar catalysis

HYPOTHESIS

Electrostatic attractions between the anionic head group of sodium alkylsulphates and the positively charged inner surface of halloysite nanotubes (HNTs) drive to the formation of tubular inorganic micelles, which might be employed as nanoreactors for the confinement of non polar compounds in aqueous media. On this basis, sodium alkylsulphates/halloysite hybrids could be efficient nanocatalysts for organic reactions occurring in water.

EXPERIMENTS

Sodium decylsulphate (NaDeS) and sodium dodecylsulphate (NaDS) were selected for the functionalization of the halloysite cavity. The composition, the structure and the surface charge properties of the hybrid nanotubes were determined. The actual formation of inorganic micelles was explored by studying the microviscosity and polarity characteristics of the surfactant modified nanotubes through fluorescence spectroscopy experiments using DiPyme as probe. The performances of the sodium alkylsulphates/halloysite composites as micellar catalysts for the Belousov-Zhabotinsky (BZ) reaction were investigated.

FINDINGS

The halloysite functionalization with sodium alkylsulphates generated the formation of hydrophobic microdomains with an enhanced microviscosity. Compared to the surfactant conventional micelles, the functionalized nanotubes induced larger enhancements on the rate constant of the BZ reaction. This is the first report on the surfactant/halloysite hybrids showing their efficiencies as reusable nanocatalysts, which are dependent on their peculiar microviscosity and polarity properties.

Lawsone-bentonite hybrid systems for pH-dependent sustained release of ciprofloxacin

Biocompatible lawsone-bentonite hybrid systems for pH-dependent sustained release of ciprofloxacin.

Sustainability in Heritage Wood Conservation: Challenges and Directions for Future Research

Conserving the world’s cultural and natural heritage is considered a key contributor to achieving the targets set out in the United Nation’s Sustainable Development Goals, yet how much attention do we pay to the methods we use to conserve and protect this heritage? With a specific focus on wooden objects of cultural heritage, this review discusses the current state-of-the-art in heritage conservation in terms of sustainability, sustainable alternatives to currently used consolidants, and new research directions that could lead to more sustainable consolidants in the future. Within each stage a thorough discussion of the synthesis mechanisms and/or extraction protocols, particularly for bio-based resources is provided, evaluating resource usage and environmental impact. This is intended to give the reader a better understanding of the overall sustainability of each different approach and better evaluate consolidant choices for a more sustainable approach. The challenges facing the development of sustainable consolidants and recent research that is likely to lead to highly sustainable new consolidant strategies in the future are also discussed. This review aims to contribute to the ongoing discussion of sustainable conservation and highlight the role that consolidants play in truly sustainable heritage conservation.

A Novel Single-Step-Labeled 212Pb-CaCO3 Microparticle for Internal Alpha Therapy: Preparation, Stability, and Preclinical Data from Mice

Lead-212 is recognized as a promising radionuclide for targeted alpha therapy for tumors. Many studies of ²¹²Pb-labeling of various biomolecules through bifunctional chelators have been conducted. Another approach to exploiting the cytotoxic effect is coupling the radionuclide to a microparticle acting as a carrier vehicle, which could be used for treating disseminated cancers in body cavities. Calcium carbonate may represent a suitable material, as it is biocompatible, biodegradable, and easy to synthesize. In this work, we explored ²¹²Pb-labeling of various CaCO₃ microparticles and developed a protocol that can be straightforwardly implemented by clinicians. Vaterite microparticles stabilized by pamidronate were effective as ²¹²Pb carriers; labeling yields of ≥98% were achieved, and ²¹²Pb was strongly retained by the particles in an in vitro stability assessment. Moreover, the amounts of ²¹²Pb reaching the kidneys, liver, spleen, and skeleton of mice following intraperitoneal (i.p.) administration were very low compared to i.p. injection of unbound ²¹²Pb²⁺, indicating that CaCO₃-bound ²¹²Pb exhibited stability when administered intraperitoneally. Therapeutic efficacy was observed in a model of i.p. ovarian cancer for all the tested doses, ranging from 63 to 430 kBq per mouse. Lead-212-labeled CaCO₃ microparticles represent a promising candidate for treating intracavitary cancers.

Nanoscale Functional Additives Application in the Low Temperature Greases

Due to the fact that the application of AW and EP additives in low-temperature greases may lead to worse high-temperature and anti-corrosion characteristics as well as additional burden on the environment due to the content of aggressive components, in this paper, the possibility of replacing these additives with NFA, which do not have these disadvantages, was investigated. The analysis of nanosized particles being used as functional additives in greases was carried out. The morphology of the following nanoparticles was studied: montmorillonite K 10, silica, calcium car-bonate and borate, halloysite, and molybdenum disulfide incorporated in halloysite tubes. The effect of nanostructured components on the physicochemical characteristics and anti-wear and anti-scuffing properties of complex lithium, polyurea, and polymer greases were studied. Maximal improvement of anti-wear and anti-scuffing characteristics of cLi-greases was reached when using silica and calcium borate. Maximal improvement of anti-scuffing properties of PU-lubricant was reached when using calcium carbonate and the two-component NFA based on halloysite, for anti-wear properties when adding silicon dioxide and halloysite. When the concentrations of silicon dioxide and calcium carbonate was increased from 1 to 3 wt.%, there was a decrease in yield stress of the structural frame of the PU-lubricant and its colloidal stability was worse. The increase of the concentration of calcium carbonate and borate nanoparticles in the studied range led to a significant improvement of the anti-wear and anti-scuffing characteristics of the PU grease, respectively. The greases properties’ dependence from the nanostructured functional additives’ introduction method and their concentration were investigated. Nanoparticles were added into the test lubricants before and after the thermo-mechanical dispersion stage. The addition of silicon dioxide and calcium carbonate NFA after the heat treatment stage led to worsening of the characteristics of the plastic material, and the increase of their concentration from 1 to 3 wt.% formed a harder structure of Li-grease. On the contrary, the addition of calcium borate NFA is recommended after the thermomechanical dispersion. The choice of nanoparticles and the method of their addition to the lubricants of various types was carried out according to the results of the previous stage of the research. Along with the analysis of the physicochemical characteristics and anti-wear and anti-scuffing properties of the lubricants, the structure of the dispersion phase of nanomodified lubricants were studied.

Mesoporous One-Component Gold Microshells as 3D SERS Substrates

Surface-enhanced Raman scattering (SERS) is a powerful analytical tool for label-free analysis that has found a broad spectrum of applications in material, chemical, and biomedical sciences. In recent years, a great interest has been witnessed in the rational design of SERS substrates to amplify Raman signals and optionally allow for the selective detection of analytes, which is especially essential and challenging for biomedical applications. In this study, hard templating of noble metals is proposed as a novel approach for the design of one-component tailor-made SERS platforms. Porous Au microparticles were fabricated via dual ex situ adsorption of Au nanoparticles and in situ reduction of HAuCl₄ on mesoporous sacrificial microcrystals of vaterite CaCO₃. Elimination of the microcrystals at mild conditions resulted in the formation of stable mesoporous one-component Au microshells. SERS performance of the microshells at very low 0.4 µW laser power was probed using rhodamine B and bovine serum albumin showing enhancement factors of 2 × 10⁸ and 8 × 10⁸, respectively. The proposed strategy opens broad avenues for the design and scalable fabrication of one-component porous metal particles that can serve as superior SERS platforms possessing both excellent plasmonic properties and the possibility of selective inclusion of analyte molecules and/or SERS nanotags for highly specific SERS analysis.

Biopolymer-Based Multilayer Capsules and Beads Made via Templating: Advantages, Hurdles and Perspectives

One of the undeniable trends in modern bioengineering and nanotechnology is the use of various biomolecules, primarily of a polymeric nature, for the design and formulation of novel functional materials for controlled and targeted drug delivery, bioimaging and theranostics, tissue engineering, and other bioapplications. Biocompatibility, biodegradability, the possibility of replicating natural cellular microenvironments, and the minimal toxicity typical of biogenic polymers are features that have secured a growing interest in them as the building blocks for biomaterials of the fourth generation. Many recent studies showed the promise of the hard-templating approach for the fabrication of nano- and microparticles utilizing biopolymers. This review covers these studies, bringing together up-to-date knowledge on biopolymer-based multilayer capsules and beads, critically assessing the progress made in this field of research, and outlining the current challenges and perspectives of these architectures. According to the classification of the templates, the review sequentially considers biopolymer structures templated on non-porous particles, porous particles, and crystal drugs. Opportunities for the functionalization of biopolymer-based capsules to tailor them toward specific bioapplications is highlighted in a separate section.

Intact Fibrillated 3D-Printed Cellulose Macrofibrils/CaCO3 for Controlled Drug Delivery

The tendency to use cellulose fibrils for direct ink writing (DIW) of three-dimensional (3D) printing has been growing extensively due to their advantageous mechanical properties. However, retaining cellulose in its fibrillated forms after the printing process has always been a challenge. In this study, cellulose macrofibrils (CMFs) from oil palm empty fruit bunch (OPEFB) fibers were partially dissolved for consistent viscosity needed for DIW 3D printing. The printed CMF structure obtained from optimized printing profiles (volumetric flow rate, Qv = 9.58 mm/s; print speed, v = 20 mm/s), exhibited excellent mechanical properties (tensile strength of 66 MPa, Young's modulus of 2.16 GPa, and elongation of 8.76%). The remarkable structural and morphological effects of the intact cellulose fibrils show a homogeneous distribution with synthesized precipitated calcium carbonate (CaCO3) nanoparticles. The shear-aligned CMF/CaCO3 printed composite exhibited a sustained therapeutic drug release profile that can reduce rapid release that has adverse effects on healthy cells. In comparison with the initial burst release of 5-fluorouracil (5-FU) by CaCO3, the controlled release of 5-fluorouracil can be varied (48 to 75%) with the composition of CMF/CaCO3 allowing efficient release over time.

Application of Halloysite Nanotubes in Cancer Therapy-A Review

Halloysite, a nanoclay characterized by a unique, tubular structure, with oppositely charged interior and exterior, suitable, nanometric-range size, high biocompatibility, and low cost, is recently gaining more and more interest as an important and versatile component of various biomaterials and delivery systems of biomedical relevance. One of the most recent, significant, and intensely studied fields in which halloysite nanotubes (HNTs) found diverse applications is cancer therapy. Even though this particular direction is mentioned in several more general reviews, it has never so far been discussed in detail. In our review, we offer an extended survey of the literature on that particular aspect of the biomedical application of HNTs. While historical perspective is also given, our paper is focused on the most recent developments in this field, including controlled delivery and release of anticancer agents and nucleic acids by HNT-based systems, targeting cancer cells using HNT as a carrier, and the capture and analysis of circulating tumor cells (CTCs) with nanostructured or magnetic HNT surfaces. The overview of the most up-to-date knowledge on the HNT interactions with cancer cells is also given.

Nanoencapsulation of Pomegranate Extract to Increase Stability and Potential Dermatological Protection

Pomegranate extract (PG-E) has been reported to exert a protective effect on the skin due to its antioxidant activity. Ingredients rich in phenolic compounds are unstable in extract solutions, and, therefore, the use of a suitable nanosystem to encapsulate this type of extract could be necessary in different biotechnological applications. Thus, we investigated the capacity of Brassica oleracea L. (cauliflower) inflorescence vesicles (CI-vesicles) to encapsulate PG-E and determined the stability and the antioxidant capacity of the system over time. In addition, the protective effect against UV radiation and heavy metals in HaCaT cells was also tested. The CI-vesicles had an entrapment efficiency of around 50%, and accelerated stability tests did not show significant changes in the parameters tested. The results for the HaCaT cells showed the non-cytotoxicity of the CI-vesicles containing PG-E and their protection against heavy metals (lead acetate and mercuric chloride) and UV-B radiation through a reduction of oxidative stress. The reduction of the percentage of deleted mtDNA (mtDNA4977, "common deletion") in UV-treated HaCaT cells due to the presence of CI-vesicles containing PG-E indicated the mechanism of protection. Therefore, the effects of CI-vesicles loaded with PG-E against oxidative stress support their utilization as natural cosmeceuticals to protect skin health against external damage from environmental pollution and UV radiation.

Which Biopolymers Are Better for the Fabrication of Multilayer Capsules? A Comparative Study Using Vaterite CaCO3 as Templates

The polymer layer-by-layer assembly is accounted among the most attractive approaches for the design of advanced drug delivery platforms and biomimetic materials in 2D and 3D. The multilayer capsules can be made of synthetic or biologically relevant (e.g., natural) polymers. The biopolymers are advantageous for bioapplications; however, the design of such "biocapsules" is more challengeable due to intrinsic complexity and lability of biopolymers. Until now, there are no systematic studies that report the formation mechanism for multilayer biocapsules templated upon CaCO₃ crystals. This work evaluates the structure-property relationship for 16 types of capsules made of different biopolymers and proposes the capsule formation mechanism. The capsules have been fabricated upon mesoporous cores of vaterite CaCO₃, which served as a sacrificial template. Stable capsules of polycations poly-l-lysine or protamine and four different polyanions were successfully formed. However, capsules made using the polycation collagen and dextran amine underwent dissolution. Formation of the capsules has been correlated with the stability of the respective polyelectrolyte complexes at increased ionic strength. All formed capsules shrink upon core dissolution and the degree of shrinkage increased in the series of polyanions: heparin sulfate < dextran sulfate < chondroitin sulfate < hyaluronic acid. The same trend is observed for capsule adhesiveness to the glass surface, which correlates with the decrease in polymer charge density. The biopolymer length and charge density govern the capsule stability and internal structure; all formed biocapsules are of a matrix-type, other words are microgels. These findings can be translated to other biopolymers to predict biocapsule properties.

Chitosan/carbon nanotube hybrids: recent progress and achievements for industrial applications

This review focuses on the state-of-the-art of the recent research development on chitosan/CNT nanomaterials in biomedicine, (bio)sensors, and pollution management.

Biomineralization at fluid interfaces

Biomineralization is of paramount importance for life on Earth. The delicate balance of physicochemical interactions at the interface between organic and inorganic matter during all stages of biomineralization resembles an extremely high complexity. The coordination of this sophisticated biological machinery and physicochemical scenarios is certainly a wonderful show of nature. Understanding of the biomineralization processes is still far from complete. The recent advances in biomineralization research from the Colloid and Interface Science perspective are reviewed herein. The synergy between this two fields of research is demonstrated. The unique opportunities offered by purposefully designed fluid interfaces, mainly Langmuir monolayers are presented. Biomedical applications of biomineral-based nanostructures are discussed, showing their improved biocompatibility and on-demand delivery features. A brief guide to the array of state-of-the-art experimental techniques for unraveling the mechanisms of biomineralization using fluid interfaces is included. In summary, the fruitful and exciting crossroad between Colloid and Interface Science with Biomineralization is exhibited.

Cellular Analysis and Chemotherapeutic Potential of a Bi-Functionalized Halloysite Nanotube

The surface of halloysite nanotubes (HNTs) was bifunctionalized with two ligands—folic acid and a fluorochrome. In tandem, this combination should selectively target cancer cells and provide a means for imaging the nanoparticle. Modified bi-functionalized HNTs (bi-HNTs) were then doped with the anti-cancer drug methotrexate. bi-HNTs were characterized and subjected to in vitro tests to assess cellular growth and changes in cellular behavior in three cell lines—colon cancer, osteosarcoma, and a pre-osteoblast cell line (MC3T3-E1). Cell viability, proliferation, and cell uptake efficiency were assessed. The bi-HNTs showed cytocompatibility at a wide range of concentrations. Compared with regular-sized HNTs, reduced HNTs (~6 microns) were taken up by cells in more significant amounts, but increased cytotoxicity lead to apoptosis. Multi-photon images confirmed the intracellular location of bi-HNTs, and the method of cell entry was mainly through caveolae-mediated endocytosis. The bi-HNTs showed a high drug loading efficiency with methotrexate and a prolonged period of release. Most importantly, bi-HNTs were designed as a drug carrier to target cancer cells specifically, and imaging data shows that non-cancerous cells were unaffected after exposure to MTX-doped bi-HNTs. All data provide support for our nanoparticle design as a mechanism to selectively target cancer cells and significantly reduce the side-effects caused by off-targeting of anti-cancer drugs.

CaCO3 crystals as versatile carriers for controlled delivery of antimicrobials

CaCO₃ crystals have been known for a long time as naturally derived and simply fabricated nano(micro)-sized materials able to effectively host and release various molecules. This review summarises the use of CaCO₃ crystals as versatile carriers to host, protect and release antimicrobials, offering a strong tool to tackle antimicrobial resistance, a serious global health problem. The main methods for the synthesis of CaCO₃ crystals with different properties, as well as the approaches for the loading and release of antimicrobials are presented. Finally, prospects to utilize the crystals in order to improve the therapeutic outcome and combat antimicrobial resistance are highlighted. Ultimately, this review intends to provide an in-depth overview of the application of CaCO₃ crystals for the smart and controlled delivery of antimicrobial agents and aims at identifying the advantages and drawbacks as well as guiding future works, research directions and industrial applications.

Layered biocompatible pH-responsive antibacterial composite film based on HNT/PLGA/chitosan for controlled release of minocycline as burn wound dressing

In the present study, a promising pH-responsive wound dressing was prepared. Halloysite nanotube (HNT) composites were modified with different concentration of both poly (lactic-co-glycolic acid) (PLGA) and chitosan (CS) through the Layer-by-Layer (LbL) strategy for targeted and controlled drug delivery of minocycline (MC). The resulting composites were characterized by FT-IR, XRD, zeta-potential, TGA, FE-SEM and TEM studies. Studying the biodegradability, water uptake, photostability, and water vapor transmission of resulting composites revealed that the composite film absorbed wound secretions, did not degrade, and penetrated properly to wound during the treatment. The results of protein adsorption showed that the optimized composite (C₄₀P₆₀MNT) was blood-compatible. Studying the release profile of the drug showed pH-responsive behavior that was fitted with Korsmeyer-Peppas kinetic model. In-vitro antibacterial testing showed that the C₄₀P₆₀MNT sample had an acceptable effect on the inhibition of gram-positive and gram-negative bacteria. In wound healing test (in-vivo studies), this MC loaded composite film showed faster healing of the burn wound in rat compare to the control sample. Due to the characteristics of the optimized sample, it can be considered as a promising candidate for pH-responsive drug delivery in the treatment of chronic burn wounds.

Polyelectrolyte Multilayer Capsule (PEMC)-Based Scaffolds for Tissue Engineering

Tissue engineering (TE) is a highly multidisciplinary field that focuses on novel regenerative treatments and seeks to tackle problems relating to tissue growth both in vitro and in vivo. These issues currently involve the replacement and regeneration of defective tissues, as well as drug testing and other related bioapplications. The key approach in TE is to employ artificial structures (scaffolds) to support tissue development; these constructs should be capable of hosting, protecting and releasing bioactives that guide cellular behaviour. A straightforward approach to integrating bioactives into the scaffolds is discussed utilising polyelectrolyte multilayer capsules (PEMCs). Herein, this review illustrates the recent progress in the use of CaCO3 vaterite-templated PEMCs for the fabrication of functional scaffolds for TE applications, including bone TE as one of the main targets of PEMCs. Approaches for PEMC integration into scaffolds is addressed, taking into account the formulation, advantages, and disadvantages of such PEMCs, together with future perspectives of such architectures.

Facile Fabrication of Natural Polyelectrolyte-Nanoclay Composites: Halloysite Nanotubes, Nucleotides and DNA Study

Complexation of biopolymers with halloysite nanotubes (HNTs) can greatly affect their applicability as materials building blocks. Here we have performed a systematic investigation of fabrication of halloysite nanotubes complexes with nucleotides and genomic DNA. The binding of DNA and various nucleotide species (polyAU, UMP Na₂, ADP Na₃, dATP Na, AMP, uridine, ATP Mg) by halloysite nanotubes was tested using UV-spectroscopy. The study revealed that binding of different nucleotides to the nanoclay varied but was low both in the presence and absence of MgCl₂, while MgCl₂ facilitated significantly the binding of longer molecules such as DNA and polyAU. Modification of the nanotubes with DNA and nucleotide species was further confirmed by measurements of ζ-potentials. DNA-Mg-modified nanotubes were characterized using transmission electron (TEM), atomic force (AFM) and hyperspectral microscopies. Thermogravimetric analysis corroborated the sorption of DNA by the nanotubes, and the presence of DNA on the nanotube surface was indicated by changes in the surface adhesion force measured by AFM. DNA bound by halloysite in the presence of MgCl₂ could be partially released after addition of phosphate buffered saline. DNA binding and release from halloysite nanotubes was tested in the range of MgCl₂ concentrations (10–100 mM). Even low MgCl₂ concentrations significantly increased DNA sorption to halloysite, and the binding was leveled off at about 60 mM. DNA-Mg-modified halloysite nanotubes were used for obtaining a regular pattern on a glass surface by evaporation induced self-assembly process. The obtained spiral-like pattern was highly stable and resisted dissolution after water addition. Our results encompassing modification of non-toxic clay nanotubes with a natural polyanion DNA will find applications for construction of gene delivery vehicles and for halloysite self-assembly on various surfaces (such as skin or hair).

Encapsulation of Low-Molecular-Weight Drugs into Polymer Multilayer Capsules Templated on Vaterite CaCO3 Crystals

Polyelectrolyte multilayer capsules (PEMCs) templated onto biocompatible and easily degradable vaterite CaCO₃ crystals via the layer-by-layer (LbL) polymer deposition process have served as multifunctional and tailor-made vehicles for advanced drug delivery. Since the last two decades, the PEMCs were utilized for effective encapsulation and controlled release of bioactive macromolecules (proteins, nucleic acids, etc.). However, their capacity to host low-molecular-weight (LMW) drugs (<1–2 kDa) has been demonstrated rather recently due to a limited retention ability of multilayers to small molecules. The safe and controlled delivery of LMW drugs plays a vital role for the treatment of cancers and other diseases, and, due to their tunable and inherent properties, PEMCs have shown to be good candidates for smart drug delivery. Herein, we summarize recent progress on the encapsulation of LMW drugs into PEMCs templated onto vaterite CaCO₃ crystals. The drug loading and release mechanisms, advantages and limitations of the PEMCs as LMW drug carriers, as well as bio-applications of drug-laden capsules are discussed based upon the recent literature findings.

Vaterite submicron particles designed for photodynamic therapy in cells

BACKGROUND

Calcium carbonate (CaCO₃) is one of the most abundant materials in the world. It has several different crystalline phases as present in the minerals: calcite, aragonite and vaterite, which are anhydrous crystalline polymorphs. Regarding the preparation of these microparticles, the most important aspect is the control of the polymorphism, particle size and material morphology. This study aimed to develop porous microparticles of calcium carbonate in the vaterite phase for the encapsulation of chloro-aluminum phthalocyanine (ClAlPc) as a photosensitizer (PS) for application in Photodynamic Therapy (TFD).

METHODS

In this study, spherical vaterite composed of microparticles are synthesized by precipitation route assisted by polycarboxylate superplasticizer (PSS). The calcium carbonate was prepared by reacting a mixed solution of Na₂CO₃ with a CaCl₂ solution at an ambient temperature, 25 °C, in the presence of polycarboxylate superplasticizer as a stabilizer. The photosensitizer was incorporated by adsorption technique in the CaCO₃ microparticles. The CaCO₃ microparticles were studied by scanning electron microscopy, steady-state, and their biological activity was evaluated using in vitro cancer cell lines by trypan blue exclusion method. The intracellular localization of ClAlPc was examined by confocal microscopy.

RESULTS

The CaCO₃ microparticles obtained are uniform and homogeneously sized, non-aggregated, and highly porous microparticles. The calcium carbonate microparticles show an average size of 3 μm average pore size of about 30-40 nm. The phthalocyanine derivative loaded-microparticles maintained their photophysical behavior after encapsulation. The captured carriers have provided dye localization inside cells. The in vitro experiments with ClAlPc-loaded CaCO₃ microparticles showed that the system is not cytotoxic in darkness, but exhibits a substantial phototoxicity at 3 μmol.L^-1 of photosensitizer concentration and 10 J.cm^-2 of light. These conditions are sufficient to kill about 80 % of the cells.

CONCLUSIONS

All the performed physical-chemical, photophysical, and photobiological measurements indicated that the phthalocyanine-loaded CaCO3 microparticles are a promising drug delivery system for photodynamic therapy and photoprocesses.

A mussel-inspired osteogenesis microenvironment with bioactive peptides for the dual-functionalization of biomedical substrates

A facile but useful peptide modified strategy for the dual-functionalization of biomedical implants with cell-adhesion-enhancing as well as differentiation-inducing abilities.