Catalytic trends of nitrogen doped carbon nanotubes for oxygen reduction reaction

Enhanced Four-Electron Selective Oxygen Reduction Reaction at Carbon-Nanotube-Supported Sulfonic-Acid-Functionalized Copper Phthalocyanine

In the present work, the oxygen reduction reaction (ORR) is explored in an acidic medium with two different catalytic supports (multi-walled carbon nanotubes (MWCNTs) and nitrogen-doped multi-walled carbon nanotubes (NMWCNTs)) and two different catalysts (copper phthalocyanine (CuPc) and sulfonic acid functionalized CuPc (CuPc-SO3 - )). The composite, NMWCNTs-CuPc-SO3 - exhibits high ORR activity (assessed based on the onset potential (0.57 V vs. reversible hydrogen electrode) and Tafel slope) in comparison to the other composites. Rotating ring disc electrode (RRDE) studies demonstrate a highly selective four-electron ORR (less than 2.5 % H2 O2 formation) at the NMWCNTs-CuPc-SO3 - . The synergistic effect of the catalyst support (NMWCNTs) and sulfonic acid functionalization of the catalyst (in CuPc-SO3 - ) increase the efficiency and selectivity of the ORR at the NMWCNTs-CuPc-SO3 - . The catalyst activity of NMWCNTs-CuPc-SO3 - has been compared with many reported materials and found to be better than several catalysts. NMWCNTs-CuPc-SO3 - shows high tolerance for methanol and very small deviation in the onset potential (10 mV) between the linear sweep voltammetry responses recorded before and after 3000 cyclic voltammetry cycles, demonstrating exceptional durability. The high durability is attributed to the stabilization of CuPc-SO3 - by the additional coordination with nitrogen (Cu-Nx ) present on the surface of NMWCNTs.

Perspectives on the Competition between the Electrochemical Water and N2 Oxidation on a TiO2(110) Electrode

The electrochemical nitrogen oxidation reaction (NOR) has recently drawn attention due to promising experimental and theoretical results. It provides an alternative, environmentally friendly route to directly synthesize nitrate from N₂(g). There is to date a limited number of investigations focused on the electrochemical NOR. Herein, we present a detailed computational study on the kinetics of both the NOR and the competing oxygen evolution reaction (OER) on the TiO₂(110) electrode under ambient conditions. The use of grand canonical density functional theory in combination with the linearized Poisson-Boltzmann equation allows a continuous tuning of the explicitly applied electrical potential. We find that the OER may either promote or suppress the NOR on TiO₂(110) depending on reaction conditions. The detailed atomistic insights provided on the mechanisms of these competing processes make possible further developments toward a direct electrochemical NOR process.

Nitrogen-doped carbon derived from horse manure biomass as a catalyst for the oxygen reduction reaction

A massive amount of animal biomass is generated daily from livestock farms, agriculture, and food industries, causing environmental and ecological problems. The conversion of animal biomass into value-added products has recently gained considerable interest in materials science research. Herein, horse manure (HM) was utilized as a precursor for synthesizing nitrogen-doped carbons (NCs) via hydrothermal ammonia treatment and the post pyrolysis process. The ammonia concentration varied between 0.5, 1.0, and 1.5 M in the hydrothermal process. From the comprehensive characterization results, horse manure-derived nitrogen-doped carbons (HMNCs) exhibited an amorphous phase and a hierarchical nanoporous structure. The specific surface area decreased from 170.1 to 66.6 m2 g-1 as the ammonia concentration increased due to micropore deterioration. The nitrogen content was 0.90 atom% even with no ammonia treatment, indicating self-nitrogen doping. With hydrothermal ammonia treatment, the nitrogen content slightly enhanced up to 1.54 atom%. The electrocatalytic activity for the oxygen reduction reaction (ORR) of HMNCs in an alkaline solution was found to be related to nitrogen doping content and porous structure. The ORR activity of HMNCs mainly proceeded via a combination of two- and four-electron pathways. Although the ORR activity of HMNCs was still not satisfactory and comparable to that of a commercial Pt/carbon catalyst, it showed better long-term durability. The results obtained in this work provide the potential utilization of HM as a precursor for ORR catalysts and other related applications.

Modified Carbon Nanotubes: Surface Properties and Activity in Oxygen Reduction Reaction

In order to develop highly efficient and stable catalysts for oxygen reduction reaction (ORR) that do not contain precious metals, it is necessary to modify carbon nanotubes (CNT) and define the effect of the modification on their activity in the ORR. In this work, the modification of CNTs included functionalization by treatment in NaOH or HNO3 (soft and hard conditions, respectively) and subsequent doping with nitrogen (melamine was used as a precursor). The main parameters that determine the efficiency of modified CNT in ORR are composition and surface area (XPS, BET), hydrophilic–hydrophobic surface properties (method of standard contact porosimetry (MSP)) and zeta potential (dynamic light scattering method). The activity of CNT in ORR was assessed following half-wave potential, current density within kinetic potential range and the electrochemically active surface area (SEAS). The obtained results show that the modification of CNT with oxygen-containing groups leads to an increase in hydrophilicity and, consequently, SEAS, as well as the total (overall) current. Subsequent doping with nitrogen ensures further increase in SEAS, higher zeta potential and specific activity in ORR, reflected in the shift of the half-wave potential by 150 mV for CNTNaOH-N and 110 mV for CNTHNO3-N relative to CNTNaOH and CNTHNO3, respectively. Moreover, the introduction of N into the structure of CNTHNO3 increases their corrosion stability.

Assessment of the Accuracy of Density Functionals for Calculating Oxygen Reduction Reaction on Nitrogen-Doped Graphene

Experimental studies of the oxygen reduction reaction (ORR) at nitrogen-doped graphene electrodes have reported a remarkably low overpotential, on the order of 0.5 V, similar to Pt-based electrodes. Theoretical calculations using density functional theory have lent support to this claim. However, other measurements have indicated that transition metal impurities are actually responsible for the ORR activity, thereby raising questions about the reliability of both the experiments and the calculations. To assess the accuracy of the theoretical calculations, various generalized gradient approximation (GGA), meta-GGA, and hybrid functionals are employed here and calibrated against high-level wave-function-based coupled-cluster calculations (CCSD(T)) of the overpotential as well as self-interaction corrected density functional calculations and published quantum Monte Carlo calculations of O adatom binding to graphene. The PBE0 and HSE06 hybrid functionals are found to give more accurate results than the GGA and meta-GGA functionals, as would be expected, and for a low dopant concentration, 3.1%, the overpotential is calculated to be 1.0 V. The GGA and meta-GGA functionals give a lower estimate by as much as 0.4 V. When the dopant concentration is doubled, the overpotential calculated with hybrid functionals decreases, while it increases in GGA functional calculations. The opposite trends result from different potential-determining steps, the *OOH species being of central importance in the hybrid functional calculations, while the reduction of *O determines the overpotential obtained in GGA and meta-GGA calculations. The results presented here are mainly based on calculations of periodic representations of the system, but a comparison is also made with molecular flake models that are found to give erratic results due to finite size effects and geometric distortions during energy minimization. The presence of the electrolyte has not been taken into account explicitly in the calculations presented here but is estimated to be important for definitive calculations of the overpotential.

Vanadium -mediated ultrafine Co/Co9S8 nanoparticles anchored on Co-N-doped porous carbon enable efficient hydrogen evolution and oxygen reduction reactions

Developing cost-effective, highly-active and robust electrocatalysts is of vital importance to supersede noble-metal ones for both hydrogen evolution reactions (HERs) and oxygen reduction reactions (ORRs). Herein, a unique vanadium-mediated space confined strategy is reported to construct a composite structure involving Co/Co₉S₈ nanoparticles anchored on Co-N-doped porous carbon (VCS@NC) as bifunctional electrocatalysts toward HER and ORR. Benefitting from the ultrafine nanostructure, abundant Co-N_x active sites, large specific surface area and defect-rich carbon framework, the resultant VCS@NC exhibits unexceptionable HER catalytic activity, needing extremely low HER overpotentials in pH-universal media (alkaline: 117 mV, acid: 178 mV, neutral: 210 mV) at a current density of 10 mA cm^-2, paralleling at least 100 h catalytic durability. Notably, the VCS@NC catalyst delivers high-efficiency ORR performance in alkaline solution, accompanied with a quite high half wave potential of 0.901 V, far overmatching the commercial Pt/C catalyst. Our research opens up novel insight into engineering highly-efficient multifunctional non-precious metal electrocatalysts by a metal-mediated space-confined strategy in energy storage and conversion system.

Theoretical Density Functional Theory Study of Electrocatalytic Activity of MN4-Doped (M = Cu, Ag, and Zn) Single-Walled Carbon Nanotubes in Oxygen Reduction Reactions

The mechanism of oxygen reduction reaction (ORR) on transition metal-doped nitrogen codoped single-walled nanotubes, C₁₁₄H₂₄MN₄ (MN₄-CNT where M = Zn, Cu, or Ag; N = pyridinic nitrogen), has been studied with the density functional theory method at the ωB97XD/DGDZVP level of theory. The charge density analysis revealed two active sites of the catalyst toward ORR: the MN₄ site and the C=C bond of the N-C=C-N metal-chelating fragment (C₂ site). The structure of O-containing adsorbates (O₂ ^*, HOO*, O*, HO*, etc.) on the two sites and the corresponding adsorption energies were determined. The analysis of the free energy diagrams allows to conclude that the 4e ^- mechanism of ORR is thermodynamically preferable for all the studied catalysts. The probability of the 2e ^- mechanism of ORR with the formation of hydrogen peroxide decreases in the order Cu > Ag > Zn. The most and the least exergonic steps of the conventional 4e ^- mechanism of ORR on each active site of model catalysts as well as the electrode potentials of deceleration and of maximum catalytic activity in both acidic and alkaline media are determined. The relative catalytic activity toward ORR increases in the order Zn < Ag ≪ Cu and is mainly attributed to the C₂ site rather than the MN₄ site, while combined catalytic activity of the two sites (AgN₄/C₂ sites) is predicted for the AgN₄-CNT catalyst.

Are There Any Overlooked Catalysts for Electrochemical NH3 Synthesis-New Insights from Analysis of Thermochemical Data

We report relations between nitrogen-binding-energy descriptors obtained from experimental thermochemical data and limiting potentials from density functional theory data. We use the relations to build the largest volcano plot for nitrogen reduction reaction (NRR). We found that (1) Mn, Ga, and In are overlooked catalysts and (2) there are unidentified materials on the top of the volcano. Using experimental exchange current densities of hydrogen evolution reaction (HER) and Pourbaix diagrams we have identified conditions at which Mn, Ga, and In remain stable in water and selectively catalyze NRR over HER. We found that Fe, Au, Cu, Bi, and Pd, on contrary to what was reported earlier, need smaller applied potentials to start the onset of HER than NRR in water. We make a critical discussion about them and other candidates and we believe our results can be used to identify false positive measurements in the research field.

•

New descriptors for NRR from experimental thermochemical data established

•

Largest NRR volcano plot to date with a gap of unidentified materials at the top

•

Mn, Ga, and In are overlooked catalysts that can selectively catalyze NRR

•

Our results can be used to identify false-positives in the literature

The mechanism of Co oxyhydroxide nano-islands deposited on a Pt surface to promote the oxygen reduction reaction at the cathode of fuel cells

With the rapid development of fuel cell technology, the low reduction rate of oxygen on Pt-based cathodes is generally considered the main obstacle. Pt/transition metal alloys (Pt-Ms) or Pt/transition metal oxides (Pt-MO _x ) can be formed by doping transition metal atoms into the lattice of the Pt layer or depositing onto the surface of the Pt layer to intensify the catalytic activity of the electrodes. In this work, a stepwise solution chemical reduction method for high dispersion of cobalt oxyhydroxide (-OCoOH) deposited onto the facet of Pt as nano-islands and the mechanism of promoting the oxygen reduction reaction (ORR) at the cathode have been investigated by density functional theory (DFT) calculation. As a result, the electrocatalytic activity of Pt with nano-island -OCoOH structure was 3.6 times that of the Pt/C catalyst, which indicated that promoting the desorption of the first O atom and weakening the adsorption capacity of the interfacial junction Pt for the second O atom from adsorbed oxygen attributed to the migration of d-band center in Pt and the existence of the Co hydroxyl group.

Single-Atom Catalysts across the Periodic Table

Isolated atoms featuring unique reactivity are at the heart of enzymatic and homogeneous catalysts. In contrast, although the concept has long existed, single-atom heterogeneous catalysts (SACs) have only recently gained prominence. Host materials have similar functions to ligands in homogeneous catalysts, determining the stability, local environment, and electronic properties of isolated atoms and thus providing a platform for tailoring heterogeneous catalysts for targeted applications. Within just a decade, we have witnessed many examples of SACs both disrupting diverse fields of heterogeneous catalysis with their distinctive reactivity and substantially enriching our understanding of molecular processes on surfaces. To date, the term SAC mostly refers to late transition metal-based systems, but numerous examples exist in which isolated atoms of other elements play key catalytic roles. This review provides a compositional encyclopedia of SACs, celebrating the 10th anniversary of the introduction of this term. By defining single-atom catalysis in the broadest sense, we explore the full elemental diversity, joining different areas across the whole periodic table, and discussing historical milestones and recent developments. In particular, we examine the coordination structures and associated properties accessed through distinct single-atom-host combinations and relate them to their main applications in thermo-, electro-, and photocatalysis, revealing trends in element-specific evolution, host design, and uses. Finally, we highlight frontiers in the field, including multimetallic SACs, atom proximity control, and possible applications for multistep and cascade reactions, identifying challenges, and propose directions for future development in this flourishing field.

Why do RuO2 electrodes catalyze electrochemical CO2 reduction to methanol rather than methane or perhaps neither of those?

The electrochemical CO₂ reduction reaction (CO₂RR) on RuO₂ and RuO₂-based electrodes has been shown experimentally to produce high yields of methanol, formic acid and/or hydrogen while methane formation is not detected. This CO₂RR selectivity on RuO₂ is in stark contrast to copper metal electrodes that produce methane and hydrogen in the highest yields whereas methanol is only formed in trace amounts. Density functional theory calculations on RuO₂(110) where only adsorption free energies of intermediate species are considered, i.e. solvent effects and energy barriers are not included, predict however, that the overpotential and the potential limiting step for both methanol and methane are the same. In this work, we use both ab initio molecular dynamics simulations at room temperature and total energy calculations to improve the model system and methodology by including both explicit solvation effects and calculations of proton–electron transfer energy barriers to elucidate the reaction mechanism towards several CO₂RR products: methanol, methane, formic acid, CO and methanediol, as well as for the competing H₂ evolution. We observe a significant difference in energy barriers towards methane and methanol, where a substantially larger energy barrier is calculated towards methane formation than towards methanol formation, explaining why methanol has been detected experimentally but not methane. Furthermore, the calculations show why RuO₂ also catalyzes the CO₂RR towards formic acid and not CO(g) and methanediol, in agreement with experimental results. However, our calculations predict RuO₂ to be much more selective towards H₂ formation than for the CO₂RR at any applied potential. Only when a large overpotential of around −1 V is applied, can both formic acid and methanol be evolved, but low faradaic efficiency is predicted because of the more facile H₂ formation.

Energy barriers are calculated for the electrochemical CO₂ reduction reaction on the RuO₂(110) surface towards methanol, methane, formic acid, methanediol, CO and the competing H₂ formation and compared with experimental literature.

Encapsulation of Fe nanoparticles into an N-doped carbon nanotube/nanosheet integrated hierarchical architecture as an efficient and ultrastable electrocatalyst for the oxygen reduction reaction

The exploration of cost-effective, highly efficient and robust electrocatalysts toward the oxygen reduction reaction (ORR) is of paramount significance for the advancement of future renewable energy conversion devices, and yet still remains a great challenge. Herein, we demonstrate a straightforward one-step pyrolysis strategy for the scalable synthesis of an iron-nitrogen-carbon hierarchically nanostructured catalyst, in which Fe-based nanoparticles are encapsulated in bamboo-like N-doped carbon nanotubes in situ rooted from porous N-doped carbon nanosheets (Fe@N-C NT/NSs). The delicate fabrication of such an 0D/1D/2D integrated hierarchical architecture with encased Fe species and open configuration renders the formed Fe@N-C NT/NSs with sufficient confined active sites, reduced charge transfer resistance, improved diffusion kinetics and outstanding mechanical strength. As such, compared with commercial Pt/C, the optimized Fe@N-C NT/NSs catalyst exhibits efficient ORR activity, superior durability and strong tolerance to methanol in KOH medium. More impressively, when assembled as a cathode catalyst in a microbial fuel cell, the Fe@N-C NT/NSs electrode displays significantly enhanced power density and output voltage in comparison with commercial Pt/C, holding great promise in practical energy conversion devices. What's more, the simple yet reliable synthesis strategy developed here may shed light on the future design of advanced high-efficiency hierarchical architectures for diverse electrochemical applications and beyond.