Electrodeposition of sulfur-engineered amorphous nickel hydroxides on MIL-53(Fe) nanosheets to accelerate the oxygen evolution reaction

Self-etching assembly of designed NiFeMOF nanosheet arrays as high-efficient oxygen evolution electrocatalyst for water splitting

2D metal-organic frameworks (MOFs) have emerged as potential candidates for electrocatalytic oxygen evolution reactions (OER) due to their inherent properties like abundant coordination unsaturated active sites and efficient charge transfer. Herein, a versatile and massively synthesizable self-etching assembly strategy wherein nickel-iron foam (NFF) acts as a substrate and a metal ion source. Specifically, by etching the nickel-iron foam (NFF) surface using ligands and solvents, Ni/Fe metal ions are activated and subsequently reacted under hydrothermal conditions, resulting in the formation of self-supporting nanosheet arrays, eliminating the need for external metal salts. The obtained 33 % NiFeMOF/NFF exhibits remarkable OER performance with ultra-low overpotentials of 188/231 mV at 10/100 mA cm-2, respectively, outperforming most recently reported catalysts. Besides, the built 33 % NiFeMOF/NFF(+)||Pt/C(-) electrolyzer presents low cell voltages of 1.55/1.83 V at 10/100 mA cm-2, superior to the benchmark RuO2 (+)||Pt/C(-), implying good industrialization prospects. The excellent catalytic activity stems from the modulation of the electronic spin state of the Ni active site by the introduction of Fe, which facilitates the adsorption process of oxygen-containing intermediates and thus enhances the OER activity. This innovative approach offers a promising pathway for commercial-scale sustainable energy solutions.

Three-dimensional flower-like Ni-S/Co-MOF grown on Ni foam as a bifunctional electrocatalyst for efficient overall water splitting

Poor conductivity of the metal-organic frameworks (MOFs) limits their applications in overall water splitting. Surface sulfur (S) doping transition metal hydroxides would effectively improve the conductivity and adjust the electronic structure to generate additional electroactive sites. Herein, we fabricated a Ni-S/Co-MOF/NF catalyst by electroplating a Ni-S film on the 3D flower-like Co-MOF. Because the 3D flower-like structures are covered in Ni foam, the high exposure of active sites and good conductivity are obtained. Moreover, the synergistic effect between Ni-S and Co-MOF contributes to the redistribution of electrons in the catalyst, which can then optimize the catalytic performance of the material. The obtained 3D flower-like Ni-S/Co-MOF/NF demonstrates excellent activity toward both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER) in 1 M KOH, which only requires a low overpotential of 248 mV@10 mA cm-2 for the OER and 127 mV@10 mA cm-2 for the HER, respectively. At a current density of 10 mA cm-2, the Ni-S/Co-MOF/NF‖Ni-S/Co-MOF/NF requires a low cell voltage of 1.59 V to split overall water splitting.

One-pot synthesis of NiFe nanoarrays under an external magnetic field as an efficient oxygen evolution reaction catalyst

Designing and developing earth-abundant electrocatalysts for the oxygen evolution reaction (OER) in alkaline media is a critical element in the societal development of sustainable energy. MIL-53(Fe-Ni)/NF-2200Gs was synthesized under an external magnetic field. Such MIL-53(Fe-Ni)/NF-2200Gs show exceptionally high catalytic activity and require an overpotential of only 174 mV to drive a geometrical catalytic current density of 10 mA cm^-2 in 1.0 M KOH, superior to RuO₂ and most Fe, Ni-based electrocatalysts. Our work emphasizes the optimization of catalytic activity originating from the improvement of the magnetic properties of the catalyst, which enhances the spin polarization and tailors the d-electron structure of cations, leading to outstanding OER activity. This work would open new opportunities to design and develop transition-metal-based nanometer arrays toward efficient and stable water oxidation in alkaline media for applications.

Thin Film Growth of 3D Sr-based Metal-Organic Framework on Conductive Glass via Electrochemical Deposition

Integration of metal-organic frameworks (MOFs) as components of advanced electronic devices is at a very early phase of development and the fundamental issues related to their crystal growth on conductive substrate need to be addressed. Herein, we report on the structural characterization of a newly synthesized Sr-based MOF {[Sr(2,5-Pzdc)(H2 O)2 ] ⋅ 3 H2 O}n (1) and the uniform crystal growth of compound 1 on a conducting glass (fluorine doped tin oxide (FTO)) substrate using electrochemical deposition techniques. The Sr-based MOF 1 was synthesized by the reaction of Sr(NO3 )2 with 2,5-pyrazinedicarboxylic acid dihydrate (2,5-Pzdc) under solvothermal conditions. A single-crystal X-ray diffraction analysis revealed that 1 has a 3D structure and crystallizes in the triclinic P1 ‾ space group. In addition, the uniform crystal growth of this MOF on a conducting glass (FTO) substrate was successfully achieved using electrochemical deposition techniques. Only a handful of MOFs have been reposed to grown on conductive surfaces, which makes this study an important focal point for future research on the applications of MOF-based devices in microelectronics.

In situ growth of hierarchical bimetal-organic frameworks on nickel-iron foam as robust electrodes for the electrocatalytic oxygen evolution reaction

Evidence shows that self-supported electrocatalysts are crucial role to solving environmental and energy issues. In this study, self-supported 2D metal-organic framework (MOF) nanosheets grown in situ on nickel-iron foam (NFF) were prepared by a one-step solvothermal process. The hierarchical nanostructure possesses a high specific surface area and abundant metal sites, which are beneficial for electrocatalytic reactions. In the electrocatalytic oxygen evolution reaction (OER), the optimal NiFe(20Ni)-MOF/NFF can drive current densities of 10, 50 and 100 mA cm^-2 at small overpotentials of 226, 277 and 294 mV, respectively. According to the characterization results, the OER performance is improved by the synergistic action of bimetals and the generation of hydroxides/oxyhydroxides. This work provides new insights into fabricating self-supported MOF-based electrodes for water splitting that are simple and highly efficient.

Bimetallic-MOF-Derived Amorphous Zinc/Cobalt-Iron-Based Hollow Nanowall Arrays via Ion Exchange for Highly Efficient Oxygen Evolution

Oxygen evolution reaction (OER) is critical for optimizing renewable energy systems, including metal-air batteries and water electrolysis. One major challenge for OER is to develop durable and cost-effective electrocatalysts with high catalytic performance. Herein, a controllable ion-exchange method to synthesize amorphous zinc/cobalt-iron hydroxide-based hollow nanowall arrays (A-Zn/Co-Fe HNAs) derived from bimetallic metal-organic frameworks (MOFs) on carbon cloth is reported. The amorphous characteristic enables the presented materials with more electrocatalytic sites and short diffusion paths for rapid access to the electrolyte, achieving efficient charge transfer for OER. The optimized nanostructure of A-Zn/Co-Fe HNAs via tuning the amount of iron sulfate in the reaction solution delivers a low overpotential of 226 mV to reach a current density of 10 mA cm^-2 with a small Tafel slope of 37.81 mV dec^-1 while exhibiting high durability at varied current densities over 80 h. The remarkable electrochemical performance can be attributed to the synergistic effect from chemical elements of Zn, Co-Fe, and a robust hollow structure. This simple method of fabricating bimetallic-MOF-derived amorphous Zn/Co-Fe HNAs on carbon cloth can be applied as a practical platform for other OER electrocatalysts.

Highly Enhanced OER Performance by Er-Doped Fe-MOF Nanoarray at Large Current Densities

Great expectations have been held for the electrochemical splitting of water for producing hydrogen as a significant carbon-neutral technology aimed at solving the global energy crisis and greenhouse gas issues. However, the oxygen evolution reaction (OER) process must be energetically catalyzed over a long period at high output, leading to challenges for efficient and stable processing of electrodes for practical purposes. Here, we first prepared Fe-MOF nanosheet arrays on nickel foam via rare-earth erbium doping (Er_0.4 Fe-MOF/NF) and applied them as OER electrocatalysts. The Er_0.4 Fe-MOF/NF exhibited wonderful OER performance and could yield a 100 mA cm⁻² current density at an overpotential of 248 mV with outstanding long-term electrochemical durability for at least 100 h. At large current densities of 500 and 1000 mA cm⁻², overpotentials of only 297 mV and 326 mV were achieved, respectively, revealing its potential in industrial applications. The enhancement was attributed to the synergistic effects of the Fe and Er sites, with Er playing a supporting role in the engineering of the electronic states of the Fe sites to endow them with enhanced OER activity. Such a strategy of engineering the OER activity of Fe-MOF via rare-earth ion doping paves a new avenue to design other MOF catalysts for industrial OER applications.

Metal composite oxides Bi2MoO6/IL membrane as matrix for constructing ultrasensitive electrochemical immunosensor

In the process of diagnosis and disease monitoring, it is important to quickly and easily detect protein biomarkers. The strategy reported here is an attempt to prepare Bi₂MoO₆ nanomaterial with new three-dimensional holes morphology surrounded by rod and sheet to construct a simple and sensitive sensing platform, where Bi₂MoO₆/ionic liquid (IL) composite was modified on the carbon paste electrode (CPE). In order to monitor the assembly process of human IgG immunosensors, a plurality of electrochemical tests such as cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) was executed. The obtained BSA/anti-IgG/GA/Bi₂MoO6/IL-CPE displayed prominent conductivity and high sensitivity in detecting human immunoglobulin G (human IgG). Under the optimal experimental conditions, the results by differential pulse voltammetry (DPV) showed that the constructed label-free IgG immunosensor can detect IgG in the range of 0.01 to 1000 ng mL^-1, and limit of detection (LOD) was 4 pg mL^-1. The immunosensor displayed good performances including selectivity, reproducibility, and stability. Based on preliminary experiments, Bi₂MoO₆ and its composite materials are very promising for the construction of a variety biosensors for the analysis of other biological substances. Graphical abstract.

Coupling NiFe-MOF nanosheets with Ni3N microsheet arrays for efficient electrocatalytic water oxidation

An effective strategy for growing a MOF material on metallic transition metal nitride for electrocatalytic OER at high current densities.

Recent development of two-dimensional metal-organic framework derived electrocatalysts for hydrogen and oxygen electrocatalysis

Developing efficient and low-cost electrocatalysts with unique nanostructures is of great significance for improved electrocatalytic reactions, including the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR). Two-dimensional (2D) metal-organic frameworks (MOFs) have attracted recent attention because of their unique dimension-related properties, such as ultrathin thickness, large specific surface area, and abundant accessible active sites that can act as good precursors for the derivation of a variety of nanocomposites as active materials in electrocatalysis and energy-related devices. In this review, we present recent developments in 2D MOF-derived nanomaterials for hydrogen and oxygen reactions in overall water-splitting and rechargeable Zn-air batteries. The advantages of various synthetic strategies are summarized and discussed in detail. Finally, we discuss the main challenges and future perspectives of the development of 2D MOF-derived electrocatalysts.

In situ growth of well-aligned Ni-MOF nanosheets on nickel foam for enhanced photocatalytic degradation of typical volatile organic compounds

Exploitation of highly efficient catalysts for photocatalytic degradation of volatile organic compounds (VOCs) under visible light irradiation is highly desirable yet challenging. Herein, well-aligned 2D Ni-MOF nanosheet arrays vertically grown on porous nickel foam (Ni-MOF/NF) without lateral stacking were successfully prepared via a facile in situ solvothermal strategy. In this process, Ni foam could serve as both a skeleton to vertically support the Ni-MOF nanosheets and a self-sacrificial template to afford Ni ions for MOF growth. The Ni-MOF/NF nanosheet arrays with highly exposed active sites and light harvesting centres as well as fast mass and e- transport channels exhibited excellent photocatalytic oxidation activity and mineralization efficiency to typical VOCs emitted from the paint spray industry, which was almost impossible for their three-dimensional (3D) bulk Ni-MOF counterparts. A mineralization efficiency of 86.6% could be achieved at 98.1% of ethyl acetate removal. The related degradation mechanism and possible reaction pathways were also attempted based on the electron paramagnetic resonance (EPR) and online Time-of-Flight Mass Spectrometer (PTR-ToF-MS) results.