Construction of hierarchical V4C3-MXene/MoS2/C nanohybrids for high rate lithium-ion batteries

MXene as Promising Anode Material for High-Performance Lithium-Ion Batteries: A Comprehensive Review

Broad adoption has already been started of MXene materials in various energy storage technologies, such as super-capacitors and batteries, due to the increasing versatility of the preparation methods, as well as the ongoing discovery of new members. The essential requirements for an excellent anode material for lithium-ion batteries (LIBs) are high safety, minimal volume expansion during the lithiation/de-lithiation process, high cyclic stability, and high Li+ storage capability. However, most of the anode materials for LIBs, such as graphite, SnO2, Si, Al, and Li4Ti5O12, have at least one issue. Hence, creating novel anode materials continues to be difficult. To date, a few MXenes have been investigated experimentally as anodes of LIBs due to their distinct active voltage windows, large power capabilities, and longer cyclic life. The objective of this review paper is to provide an overview of the synthesis and characterization characteristics of the MXenes as anode materials of LIBs, including their discharge/charge capacity, rate performance, and cycle ability. In addition, a summary of the potential outlook for developments of these materials as anodes is provided.

Two Birds with One Stone: V4 C3 MXene Synergistically Promoted VS2 Cathode and Zinc Anode for High-Performance Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries (AZIBs) are considered to be a rising star in the large-scale energy storage area because of their low cost and environmental friendliness properties. However, the limited electrochemical performance of the cathode and severe zinc dendrite of the anode severely hinder the practical application of AZIBs. Herein, a novel 3D interconnected VS2 ⊥V4 C3 Tx heterostructure material is prepared via one-step solvothermal method. Morphological and structural characterizations show that VS2 nanosheets are uniformly and dispersedly distributed on the surface of the V4 C3 MXene substrate, which can effectively suppress volume change of the VS2 . Owing to the open heterostructure along with the high conductivity of V4 C3 MXene, the VS2 ⊥V4 C3 Tx cathode shows a high specific capacity of 273.9 mAh g-1 at 1 A g-1 and an excellent rate capability of 143.2 mAh g-1 at 20 A g-1 . The V4 C3 MXene can also effectively suppress zinc dendrite growth when used as protective layer for the Zn anode, making the V4 C3 Tx @Zn symmetric cell with a stable voltage profile for ≈1700 h. Benefitting from the synergistic modification effect of V4 C3 MXene on both the cathode and anode, the VS2 ⊥V4 C3 Tx ||V4 C3 Tx @Zn battery exhibits a long cycling lifespan of 5000 cycles with a capacity of 157.1 mAh g-1 at 5A g-1 .

Improved ion adsorption capacities and diffusion dynamics in surface anchored MoS2⊥Mo4/3B2 and MoS2⊥Mo4/3B2O2 heterostructures as anodes for alkaline metal-ion batteries

First-principles calculations were performed to analyze the atomic structures and electrochemical energy storage properties of novel MoS2⊥boridene heterostructures by anchoring MoS2 nanoflakes on Mo4/3B2 and Mo4/3B2O2 monolayers. Both thermodynamic and thermal stabilities of each heterostructure were thoroughly evaluated from the obtained binding energies and through first-principles molecular dynamics simulations at room temperature, confirming the high formability of the heterostructures. The electrochemical properties of MoS2⊥Mo4/3B2 and MoS2⊥Mo4/3B2O2 heterostructures were investigated for their potential use as anodes for alkaline metal ion batteries (Li+, Na+ and K+). It was revealed that Li+ and Na+ can form multiple stable full adsorption layers on both heterostructures, while K+ forms only a single full adsorption layer. The presence of a negative electron cloud (NEC) contributes to the stabilization of a multi-layer adsorption mechanism. For all investigated alkaline metal ions, the predicted ion diffusion dynamics are relatively sluggish for the adsorbates in the first full adsorption layer on MoS2⊥boridene heterostructures due the relatively large migration energies (>0.50 eV), compared to those of second or third full adsorption layers (<0.30 eV). MoS2⊥Mo4/3B2O2 exhibited higher onset and mean open circuit voltages as anodes for alkaline metal-ion batteries than MoS2⊥Mo4/3B2 hybrids because of enhanced interactions between the adsorbate and the Mo4/3B2O2 monolayer with the presence of O-terminations. Tailoring the size and horizontal spacing between two neighboring MoS2 nano-flakes in heterostructures led to high theoretical capacities for LIBs (531 mA h g-1), SIBs (300 mA h g-1) and PIBs (131 mA h g-1) in the current study.

Vanadium Carbide (V4C3) MXene as an Efficient Anode for Li-Ion and Na-Ion Batteries

Li-ion batteries (LIBs) and Na-ion batteries (SIBs) are deemed green and efficient electrochemical energy storage and generation devices; meanwhile, acquiring a competent anode remains a serious challenge. Herein, the density-functional theory (DFT) was employed to investigate the performance of V₄C₃ MXene as an anode for LIBs and SIBs. The results predict the outstanding electrical conductivity when Li/Na is loaded on V₄C₃. Both Li_2xV₄C₃ and Na_2xV₄C₃ (x = 0.125, 0.5, 1, 1.5, and 2) showed expected low-average open-circuit voltages of 0.38 V and 0.14 V, respectively, along with a good Li/Na storage capacity of (223 mAhg^-1) and a good cycling performance. Furthermore, there was a low diffusion barrier of 0.048 eV for Li_0.0625V₄C₃ and 0.023 eV for Na_0.0625V₄C₃, implying the prompt intercalation/extraction of Li/Na. Based on the findings of the current study, V₄C₃-based materials may be utilized as an anode for Li/Na-ion batteries in future applications.

N-doped graphene encapsulated MoS2nanosphere composite as a high-performance anode for lithium-ion batteries

MoS₂is widely used in lithium-ion batteries (LIBs) due to its high capacity (670 mAh g^-1) and unique two-dimensional structure. However, the further application was limited of MoS₂as anode materials suffer from its volume expansion and low conductivity. In this work, N-doped graphene encapsulated MoS₂nanosphere composite (MoS₂@NG) were prepared and its unique sandwich structure containing abundant mesopores and defects can efficiently enhance reaction kinetics. The MoS₂@NG electrode shows a reversible capacity of 975.9 mAh g^-1at 0.1 A g^-1after 100 cycles, and a reversible capacity of 325.2 mAh g^-1is still maintained after 300 cycles at 5 A g^-1. In addition, the MoS₂@NG electrode exhibites an excellent rate performance benefiting from the electrochemical properties dominated by capacitive behavior. This suggests that MoS₂@NG composite can be used as potential anode materials for LIBs.

Recent progress of hierarchical MoS2 nanostructures for electrochemical energy storage

Hierarchical MoS2 nanostructures are of increasing importance in energy storage via batteries or supercapacitors. Herein, the various hierarchical MoS2 materials as electrochemical electrode are reviewed in detail by classifying the...

In-situ fabrication of few-layered MoS2 wrapped on TiO2-decorated MXene as anode material for durable lithium-ion storage

Rational construction of hybrid materials integrating the collective virtues of individual building blocks has spurred significant interest in electrode materials for energy storage. Herein, a smart hybrid was fabricated via in-situ assembling of the few-layered MoS₂ (f-MoS₂) coated on the multi-layered Ti₃C₂ MXene decorated with the TiO₂ nanoparticles by the scalable hydrothermal and annealing approaches. In the unique architecture, the multi-layered Ti₃C₂ with the expanded interspaces as the conductive backbone can facilitate the electron transport, provide adequate space to facilitate the infiltration of organic electrolyte into the interior of electrode, and inhibit the aggregation of MoS₂ nanosheets, while the f-MoS₂ with enlarged interlayer can be beneficial for the lithium-ion diffusion and prevent the multi-layered Ti₃C₂from restacking. Moreover, the TiO₂ decorated on the Ti₃C₂ can effectively inhibit the instability of long-chain lithium polysulfides dissolved in organic electrolyte to improve the cycling stability. Thanks to the synergistic effect of the building blocks, the Ti₃C₂/TiO₂@f-MoS₂ hybrid employed as lithium storage anode delivers an extraordinary endurable ability with a high storage capacity of 403.1 mA h g^-1 after 1200 cycles at 2 A g^-1. Importantly, the smart hybridization strategy in this work paves an efficient way to explore the high-performance MXene-based hybrid materials in energy storage fields.

Hierarchical MXene/transition metal chalcogenide heterostructures for electrochemical energy storage and conversion

MXenes have gained rapidly increasing attention owing to their two-dimensional (2D) layered structures and unique mechanical and physicochemical properties. However, MXenes have some intrinsic limitations (e.g., the restacking tendency of the 2D structure) that hinder their practical applications. Transition metal chalcogenide (TMC) materials such as SnS, NiS, MoS₂, FeS₂, and NiSe₂ have attracted much interest for energy storage and conversion by virture of their earth-abundance, low costs, moderate overpotentials, and unique layered structures. Nonetheless, the intrinsic poor electronic conductivity and huge volume change of TMC materials during the alkali metal-ion intercalation/deintercalation process cause fast capacity fading and poor-rate and poor-cycling performances. Constructing heterostructures based on metallic conductive MXenes and highly electrochemically active TMCs is a promising and effective strategy to solve these problems and enhance the electrochemical performances. This review highlights and discusses the recent research development of MXenes and hierarchical MXene/TMC heterostructures, with a focus on the synthesis strategies, surface/heterointerface engineering, and potential applications for lithium-ion batteries, sodium-ion batteries, lithium-sulfur batteries, supercapacitors, electrocatalysis, and photocatalysis. The critical challenges and perspectives of the future development of MXenes and hierarchical MXene/TMC heterostructures for electrochemical energy storage and conversion are forecasted.

Construction of 1T@2H MoS2 heterostructures in situ from natural molybdenite with enhanced electrochemical performance for lithium-ion batteries

Natural molybdenite, an inexpensive and naturally abundant material, can be directly used as an anode material for lithium-ion batteries. However, how to release the intrinsic capacity of natural molybdenite to achieve high rate performance and high capacity is still a challenge. Herein, we introduce an innovative, effective, and one-step approach to preparing a type of heterostructure material containing 1T@2H MoS2 crafted from insertion and expansion of natural molybdenite. The metallic 1T phase formed in situ can significantly improve the electronic conductivity of MoS2. At the same time, 1T@2H MoS2 heterostructures can provide an internal electric field (E-field) to accelerate the migration rate of electrons and ions, promote the charge transfer behaviour, and ensure the reaction reversibility and lithium storage kinetics. Such worm-like 1T@2H MoS2 heterostructures also have a large specific surface area and a large number of defects, which will help shorten the lithium-ion transmission distance and provide more ion transmission channels. As a result, it exhibits a discharge capacity of 788 mA h g-1 remarkably at 100 mA g-1 after 485 cycles and stable cycling performance. It also shows excellent magnification performance of 727 mA h g-1 at 1 A g-1, compared to molybdenite concentrate. Briefly, this work's heterostructure architectures open up a new avenue for applying natural molybdenite in lithium-ion batteries, which has the potential to achieve large-scale commercial applications.

Hierarchical ultrathin layered MoS2@NiFe2O4 nanohybrids as a bifunctional catalyst for highly efficient oxygen evolution and organic pollutant degradation

Rational design and highly efficient dual-functional catalyst are still difficult to develop for electrocatalytic oxygen evolution reaction and degradation of RhB dye pollutant. Herein, we report a highly efficient "bandgap matching and interfacial coupling" strategy to synthesize nano-assembled ultrathin layered MoS₂@NiFe₂O₄ (MS@NiFeO) bifunctional catalyst constructed by the hydrothermal route and subsequently amine-hydrolysis. The OER performance of the prepared MS@NiFeO catalyst delivers a low overpotential of 290 mV at 10 mA/cm² and Tafel slope is 69.2 mV dec^-1 in an alkaline solution. In addition, the nano-assembled ultrathin layered structure of MS@NiFeO showed a highly efficient (96.37%) RhB dye degradation performance than that of MoS₂ nanosheets and NiFe₂O₄ nanostructures. Unique nanostructure of ultrathin layered MS@NiFeO with suitable band matching, interfacial charge transfer, high surface area and more active sites favored for the enhancement of the catalytic activity. This work presents an unpretentious construction and low-cost production strategy to synthesize bifunctional hybrid catalyst for oxygen evolution reaction as well as degradation of organic pollutant with superior efficiency and longer stability.

Recent Developments of Nanomaterials and Nanostructures for High-Rate Lithium Ion Batteries

Lithium ion batteries have been considered as a promising energy-storage solution, the performance of which depends on the electrochemical properties of each component, including cathode, anode, electrolyte and separator. Currently, fast charging is becoming an attractive research field due to the widespread application of batteries in electric vehicles, which are designated to replace conventional diesel automobiles in the future. In these batteries, rate capability, which is closely linked to the topology and morphology of electrode materials, is one of the determining parameters of interest. It has been revealed that nanotechnology is an exceptional tool in designing and preparing cathodes and anodes with outstanding electrochemical kinetics due to the well-known nanosizing effect. Nevertheless, the negative effects of applying nanomaterials in electrodes sometimes outweigh the benefits. To better understand the exact function of nanostructures in solid-state electrodes, herein, a comprehensive review is provided beginning with the fundamental theory of lithium ion transport in solids, which is then followed by a detailed analysis of several major factors affecting the migration of lithium ions in solid-state electrodes. The latest developments in characterisation techniques, based on either electrochemical or radiology methodologies, are covered as well. In addition, state-of-the-art research findings are provided to illustrate the effect of nanomaterials and nanostructures in promoting the rate performance of lithium ion batteries. Finally, several challenges and shortcomings of applying nanotechnology in fabricating high-rate lithium ion batteries are summarised.

Rational Design of Two-Dimensional Transition Metal Carbide/Nitride (MXene) Hybrids and Nanocomposites for Catalytic Energy Storage and Conversion

Electro-, photo-, and photoelectrocatalysis play a critical role toward the realization of a sustainable energy economy. They facilitate numerous redox reactions in energy storage and conversion systems, enabling the production of chemical feedstock and clean fuels from abundant resources like water, carbon dioxide, and nitrogen. One major obstacle for their large-scale implementation is the scarcity of cost-effective, durable, and efficient catalysts. A family of two-dimensional transition metal carbides, nitrides, and carbonitrides (MXenes) has recently emerged as promising earth-abundant candidates for large-area catalytic energy storage and conversion due to their unique properties of hydrophilicity, high metallic conductivity, and ease of production by solution processing. To take full advantage of these desirable properties, MXenes have been combined with other materials to form MXene hybrids with significantly enhanced catalytic performances beyond the sum of their individual components. MXene hybridization tunes the electronic structure toward optimal binding of redox active species to improve intrinsic activity while increasing the density and accessibility of active sites. This review outlines recent strategies in the design of MXene hybrids for industrially relevant electrocatalytic, photocatalytic, and photoelectrocatalytic applications such as water splitting, metal-air/sulfur batteries, carbon dioxide reduction, and nitrogen reduction. By clarifying the roles of individual material components in the MXene hybrids, we provide design strategies to synergistically couple MXenes with associated materials for highly efficient and durable catalytic applications. We conclude by highlighting key gaps in the current understanding of MXene hybrids to guide future MXene hybrid designs in catalytic energy storage and conversion applications.

Partial Atomic Tin Nanocomplex Pillared Few-Layered Ti3C2Tx MXenes for Superior Lithium-Ion Storage

MXenes have attracted great interest in various fields, and pillared MXenes open a new path with larger interlayer spacing. However, the further study of pillared MXenes is blocked at multilayered state due to serious restacking phenomenon of few-layered MXene nanosheets. In this work, for the first time, we designed a facile NH4+ method to fundamentally solve the restacking issues of MXene nanosheets and succeeded in achieving pillared few-layered MXene. Sn nanocomplex pillared few-layered Ti3C2Tx (STCT) composites were synthesized by introducing atomic Sn nanocomplex into interlayer of pillared few-layered Ti3C2Tx MXenes via pillaring technique. The MXene matrix can inhibit Sn nanocomplex particles agglomeration and serve as conductive network. Meanwhile, the Sn nanocomplex particles can further open the interlayer spacing of Ti3C2Tx during lithiation/delithiation processes and therefore generate extra capacity. Benefiting from the "pillar effect," the STCT composites can maintain 1016 mAh g-1 after 1200 cycles at 2000 mA g-1 and deliver a stable capacity of 680 mAh g-1 at 5 A g-1, showing one of the best performances among MXene-based composites. This work will provide a new way for the development of pillared MXenes and their energy storage due to significant breakthrough from multilayered state to few-layered one.

Recent advances in MXenes and their composites in lithium/sodium batteries from the viewpoints of components and interlayer engineering

An up-to-date review about MXenes based on their distinguishing properties, namely, large interlayer spacing and rich surface chemistry.