Electrostatically assembled carbon dots/boron nitride nanosheet hybrid nanostructures for thermal quenching-resistant white phosphors

Aerogel for Highly Efficient Photocatalytic Degradation

Photocatalysis is one of the effective ways to degrade pollutant antibiotics. Agar is used as the adsorption module to provide abundant pore structure. Carbon dots (CDs) are selected as light energy conversion components. Graphitic carbon nitride (g-C3N4) is used as the main material of the catalyst. Agar/CDs/g-C3N4-functionalized aerogel with a unique 3D pore structure is assembled. The Agar/CDs/g-C3N4 aerogel shows the highest photocurrent density, which is 3.7 times that of agar, 2.4 times that of 3-g-C3N4 and 1.6 times that of Agar/g-C3N4 aerogel. Compared with 3-g-C3N4 and Agar/g-C3N4 aerogel, which can completely remove AMX after 75 min, Agar/CDs/g-C3N4 aerogel can degrade amoxicillin (AMX) completely after 45 min of illumination. The reason is that Agar/CDs/g-C3N4 aerogel has a larger specific surface area, richer functional groups, a wider spectral range, higher photocurrent density and better carrier migration and separation efficiency. It is a good strategy with which to combine the effects of each component in the ternary system for the efficient photocatalysis of organic pollutants.

Applications of Carbon Dots for the Photocatalytic and Electrocatalytic Reduction of CO2

The photocatalytic and electrocatalytic conversion of CO2 has the potential to provide valuable products, such as chemicals or fuels of interest, at low cost while maintaining a circular carbon cycle. In this context, carbon dots possess optical and electrochemical properties that make them suitable candidates to participate in the reaction, either as a single component or forming part of more elaborate catalytic systems. In this review, we describe several strategies where the carbon dots participate, both with amorphous and graphitic structures, in the photocatalysis or electrochemical catalysis of CO2 to provide different carbon-containing products of interest. The role of the carbon dots is analyzed as a function of their redox and light absorption characteristics and their complementarity with other known catalytic systems. Moreover, detailed information about synthetic procedures is also reviewed.

Nanocomposite matrix conjugated with carbon nanomaterials for photocatalytic wastewater treatment

The problem of hazardous wastewater remediation is a complicated issue and a global challenge. Herein, a layered Co_0.5Ni_0.5Fe₂O₄/SiO₂/TiO₂ composite matrix was prepared and incorporated with three carbon nanomaterials having different dimensionalities, carbon dots (C-dots, 0D), single-walled carbon nanotubes (1D), and reduced graphene oxide (2D), in an effort to create effective photocatalytic nanocomposites for chloramine-T removal from water. Microstructural analyses confirmed the formation of nanocomposites and revealed their chemistry and structure. Elemental mapping revealed a uniform distribution of elements throughout the nanocomposite matrix that was free of impurities. The spherical shape of the matrix particles (average diameter ~90 nm) and their conjugation with the carbon nanomaterials were confirmed. Nitrogen adsorption-desorption isotherms revealed that the nanocomposites were mesoporous but also contained macropores. The surface chemical compositions of the nanocomposites were investigated and showed a range of available binding energies. The kinetics of photocatalysis by the system were studied, and the effects of different parameters (such as photocatalyst dose and charge-carrier scavengers) on the efficiency of chloramine-T degradation were also investigated. The nanocomposite loaded with 10% C-dots exhibited high UV-assisted photocatalytic activity for chloramine-T degradation (65% removal efficiency).

Long-wavelength emissive solid-state carbon dots in nanoporous glass with excellent thermal stability

Fluorescent solid-state carbon dots have drawn significant attention because of their intriguing optical properties, e.g., broad absorption, stable fluorescence, etc. However, obtaining the fluorescent solid-state carbon dots with a long-wavelength emission is still a challenging problem due to the notorious aggregation-induced quenching problem. In this paper, a technically feasible and low-cost approach for preparing fluorescent solid-state carbon dots is presented. The carbon dots are encapsulated in the nanoporous glass using the solution-phase-doping method. The size of nanoporous glass is tuned to 4.95 nm by regulating the ratio of boron to silicon to match the prepared CDs. Owing to the physical isolation and chemical connection of the -C-O-Si functional groups, the CDs are dispersed uniformly into the nanochannels of nanoporous glass. In this way, the aggregation-induced quenching problem of carbon dots is solved. The experiment results show that the photoluminescence has the excitation-independent emission at 609 nm, i.e., the prepared solid-state carbon dots are with orange fluorescence. More importantly, the solid-state carbon dots preserve orange fluorescence after heating treatment (400 °C) in the ambient atmosphere.

Applications of Carbon Dots in Optoelectronics

Carbon dots (CDs) are an attractive class of nanomaterials due to the ease of their synthesis, biocompatibility, and superior optical properties. The electronic structure of CDs and hence their optical transitions can be controlled and tuned over a wide spectral range via the choice of precursors, adjustment of the synthetic conditions, and post-synthetic treatment. We summarize recent progress in the synthesis of CDs emitting in different colors in terms of morphology and optical properties of the resulting nanoparticles, with a focus on the synthetic approaches allowing to shift their emission to longer wavelengths. We further consider formation of CD-based composite materials, and review approaches used to prevent aggregation and self-quenching of their emission. We then provide examples of applications of CDs in optoelectronic devices, such as solar cells and light-emitting diodes (LEDs) with a focus on white LEDs.

Carbon-dot-loaded CoxNi1-xFe2O4; x = 0.9/SiO2/TiO2 nanocomposite with enhanced photocatalytic and antimicrobial potential: An engineered nanocomposite for wastewater treatment

Water scarcity is now a serious global issue resulting from population growth, water decrease, and pollution. Traditional wastewater treatment plants are insufficient and cannot meet the basic standards of water quality at reasonable cost or processing time. In this paper we report the preparation, characterization and multiple applications of an efficient photocatalytic nanocomposite (CoxNi1-xFe2O4; x = 0.9/SiO2/TiO2/C-dots) synthesized by a layer-by-layer method. Then, the photocatalytic capabilities of the synthesized nanocomposite were extensively-studied against aqueous solutions of chloramine-T trihydrate. In addition, reaction kinetics, degradation mechanism and various parameters affecting the photocatalytic efficiency (nanocomposite dose, chloramine-T initial concentration, and reaction pH) were analyzed in detail. Further, the antimicrobial activities of the prepared nanocomposite were tested and the effect of UV-activation on the antimicrobial abilities of the prepared nanocomposite was analyzed. Finally, a comparison between the antimicrobial abilities of the current nanocomposite and our previously-reported nanocomposite (CoxNi1-xFe2O4; x = 0.9/SiO2/TiO2) had been carried out. Our results revealed that the prepared nanocomposite possessed a high degree of crystallinity, confirmed by XRD, while UV-Vis. recorded an absorption peak at 299 nm. In addition, the prepared nanocomposite possessed BET-surface area of (28.29 ± 0.19 m2/g) with narrow pore size distribution. Moreover, it had semi-spherical morphology, high-purity and an average particle size of (19.0 nm). The photocatalytic degradation efficiency was inversely-proportional to chloramine-T initial concentration and directly proportional to the photocatalyst dose. In addition, basic medium (pH 9) was the best suited for chloramine-T degradation. Moreover, UV-irradiation improved the antimicrobial abilities of the prepared nanocomposite against E. coli, B. cereus, and C. tropicalis after 60 min. The observed antimicrobial abilities (high ZOI, low MIC and more efficient antibiofilm capabilities) were unique compared to our previously-reported nanocomposite. Our work offers significant insights into more efficient water treatment and fosters the ongoing efforts looking at how pollutants degrade the water supply and the disinfection of water-borne pathogenic microorganisms.