Perylenequinonoid-catalyzed photoredox activation for the direct arylation of (het)arenes with sunlight

Photochemical acridone-mediated direct arylation of (hetero)arenes with aryl diazonium salts

A metal-free photochemical C-H direct arylation using acridone as a photoredox catalyst to facilitate the reaction is described. Diazonium salts as precursors for aryl radicals, demonstrated by a fluorescence quenching experiment and free radical trapping experiment, allow the functionalization of (hetero)arenes under mild conditions. A series of valuable substituted biaryl and aryl-heteroaryl compounds were prepared in moderate to good yields via the coupling. Moreover, this methodology is shown to be applicable to scale-up synthesis.

Discovery of the Biosynthetic Pathway of Beticolin 1 Reveals a Novel Non-heme Iron-dependent Oxygenase for Anthraquinone Ring Cleavage

This study used light-mediated comparative transcriptomics to identify the biosynthetic gene cluster of beticolin 1 in Cercospora. It contains an anthraquinone moiety and an unusual halogenated xanthone moiety connected by a bicyclo[3.2.2]nonane. During elucidation of the biosynthetic pathway of beticolin 1, a novel non-heme iron oxygenase BTG13 responsible for anthraquinone ring cleavage was discovered. More importantly, the discovery of non-heme iron oxygenase BTG13 is well supported by experimental evidence: (i) crystal structure and the inductively coupled plasma mass spectrometry revealed that its reactive site is built by an atypical iron ion coordination, where the iron ion is uncommonly coordinated by four histidine residues, an unusual carboxylated-lysine (Kcx377) and water; (ii) Kcx377 is mediated by His58 and Thr299 to modulate the catalytic activity of BTG13. Therefore, we believed this study updates our knowledge of metalloenzymes.

Cercosporin-bioinspired photoinactivation of harmful cyanobacteria under natural sunlight via bifunctional mechanisms

Harmful cyanobacterial blooms (HCBs), mainly caused by eutrophication, have deleterious impacts on water resources and pose a great threat to human health and natural ecosystems. Thus, an environmentally-friendly method to inhibit HCBs is urgently needed. Learning from nature, herein, natural product cercosporin, produced by the fungi Cercospora to damage plant cells under natural sunlight, was developed as a powerful photosensitive algicidal reagent to inhibit HCBs. Microcystis aeruginosa could be severely inactivated by 20 μM cercosporin in 36 h with 95% inhibition ratio under 23 W compact fluorescent light irradiation. Further mechanism investigation showed that algal cell walls and membranes along with the antioxidant and photosynthetic systems were damaged via two mechanisms, those being, reactive oxygen species generation and cell adsorption. More importantly, the practical applicability of cercosporin was demonstrated by its effectiveness in a 2 L-scale photoinactivation experiment using cyanobacterial blooms from Taihu Lake, China under natural sunlight with a lower dosage of cercosporin (7.5 μM). This study established the bifunctional mechanisms by which cercosporin inactivates HCBs, opening design possibilities for the development of novel photosensitive algicidal reagents to control HCBs.

Progress in Development of Photocatalytic Processes for Synthesis of Fuels and Organic Compounds under Outdoor Solar Light

With photovoltaics becoming a mature, commercially feasible technology, society is willing to allocate resources for developing and deploying new technologies based on using solar light. Analysis of projects supported by the European Commission in the past decade indicates exponential growth of funding to photocatalytic (PC) and photoelectrocatalytic (PEC) technologies that aim either at technology readiness levels (TRLs) TRL 1-3 or TRL > 3, with more than 75 Mio€ allocated from the year 2019 onward. This review provides a summary of PC and PEC processes for the synthesis of bulk commodities such as solvents and fuels, as well as chemicals for niche applications. An overview of photoreactors for photocatalysis on a larger scale is provided. The review rounds off with the summary of reactions performed at lab scale under natural outdoor solar light to illustrate conceptual opportunities offered by solar-driven chemistry beyond the reduction of CO₂ and water splitting. The authors offer their vision of the impact of this area of research on society and the economy.

An Earth-abundant cobalt based photocatalyst: visible light induced direct (het)arene C-H arylation and CO2 capture

In this work, we have reported a noble metal free heterogeneous photocatalyst to carry out direct (het)arene C-H arylation and solvent-free CO₂ capture via single-electron transfer processes at room temperature and under pressure. The catalytic system comprises a cobalt(III) complex grafted over the silica coated magnetic support for the efficient recovery of the photocatalytic moiety without hampering its light-harvesting capability. The novel Earth-abundant cobalt(III) based photocatalyst possesses various fascinating properties such as high surface area to volume ratios, large pore volume, crystalline behaviour, high metal loading, excellent stability and reusability. The general efficacy of the highly abundant and low-cost cobalt based heterogeneous nanocatalyst was checked for the selective conversion of aryldiazonium salts into synthetically and pharmaceutically significant biaryl motifs under ambient conditions upon irradiation with visible light. The highly efficient photocatalytic conversion of carbon dioxide (CO₂) to a value-added chemical was accomplished under mild reaction conditions with high selectivity, showing the added benefit of operational simplicity.

Synergism between few-layer black phosphorus and graphitic carbon nitride enhances the photoredox C–H arylation under visible light irradiation

A volcano-shaped relation between the amount of FLBP in the FLBP/g-CN heterojunctions in the photoredox C–H arylation was exhibited. To understand the activity of 35 wt% FLBP/g-CN, band alignments of heterojunction was studied in detailed.

Magnetically separable type-II semiconductor based ZnO/MoO3 photocatalyst: a proficient system for heteroarenes arylation and rhodamine B degradation under visible light

Shedding light on a magnetically retrievable ZnO/MoO3 photocatalyst that efficiently coupled diazonium substituted arenes with heteroarene substrates along with efficient degradation of toxic Rhodamine B.

Energy-Transfer-Mediated Photocatalysis by a Bioinspired Organic Perylenephotosensitizer HiBRCP

Energy transfer plays a special role in photocatalysis by utilizing the potential energy of the excited state through indirect excitation, in which a photosensitizer determines the thermodynamic feasibility of the reaction. Bioinspired by the energy-transfer ability of natural product cercosporin, here we developed a green and highly efficient organic photosensitizer HiBRCP (hexaisobutyryl reduced cercosporin) through structural modification of cercosporin. After structural manipulation, its triplet energy was greatly improved, and then, it could markedly promote the efficient geometrical isomerization of alkenes from the E-isomer to the Z-isomer. Moreover, it was also effective for energy-transfer-mediated organometallic catalysis, which allowed realization of the cross-coupling of aryl bromides and carboxylic acids through efficient energy transfer from HiBRCP to nickel complexes. Thus, the study on the relationship between structural manipulation and their photophysical properties provided guidance for further modification of cercosporin, which could be applied to more meaningful and challenging energy-transfer reactions.

Photoredox-Catalyzed C-H Functionalization Reactions

The fields of C-H functionalization and photoredox catalysis have garnered enormous interest and utility in the past several decades. Many different scientific disciplines have relied on C-H functionalization and photoredox strategies including natural product synthesis, drug discovery, radiolabeling, bioconjugation, materials, and fine chemical synthesis. In this Review, we highlight the use of photoredox catalysis in C-H functionalization reactions. We separate the review into inorganic/organometallic photoredox catalysts and organic-based photoredox catalytic systems. Further subdivision by reaction class-either sp² or sp³ C-H functionalization-lends perspective and tactical strategies for use of these methods in synthetic applications.

Real Metal-Free C–H Arylation of (Hetero)arenes: The Radical Way

Synthetic methodologies involving the formation of carbon–carbon bonds from carbon–hydrogen bonds are of significant synthetic interest, both for efficiency in terms of atom economy and for their undeniable usefulness in late-stage functionalization approaches. Combining these aspects with being metal-free, the radical C–H intermolecular arylation procedures covered by this review represent both powerful and green methods for the synthesis of (hetero)biaryl systems.

1 Introduction

2 Arylation with Arenediazonium Salts and Related Derivatives

2.1 Ascorbic Acid as the Reductant

2.2 Hydrazines as Reductants

2.3 Gallic Acid as the Reductant

2.4. Polyanilines as Reductants

2.5 Chlorpromazine Hydrochloride as the Reductant

2.6 Phenalenyl-Based Radicals as Reductants

2.7 Electrolytic Reduction of Diazonium Salts

2.8 Visible-Light-Mediated Arylation

3 Arylation with Arylhydrazines: Generation of Aryl Radicals Using an Oxidant

4 Arylation with Diaryliodonium Salts

5 Arylation with Aryl Halides

6 Conclusions

Biaryl Formation via Base-Promoted Direct Coupling Reactions of Arenes with Aryl Halides

In the absence of ligand, Cs2CO3-promoted cross-coupling reaction of arenes with cyano-/nitro-substituted aryl halides in DMSO affording biaryls is reported. The cyano/nitro group in biaryls is useful and convenient for further transformation. The formation of dibenzofurans resulting from the reactions between arenes and 1-bromo-2-iodobenzene is also reported. On the basis of control experiments and theoretical studies, a radical mechanism is proposed for the formation of biaryls.

Enhanced cercosporin production by co-culturing Cercospora sp. JNU001 with leaf-spot-disease-related endophytic bacteria

BACKGROUND

Owing to the excellent properties of photosensitization, cercosporin, one of naturally occurring perylenequinonoid pigments, has been widely used in photodynamic therapy, or as an antimicrobial agent and an organophotocatalyst. However, because of low efficiency of total chemical synthesis and low yield of current microbial fermentation, the limited production restricts its broad applications. Thus, the strategies to improve the production of cercosporin were highly desired. Besides traditional optimization methods, here we screened leaf-spot-disease-related endophytic bacteria to co-culture with our previous identified Cercospora sp. JNU001 to increase cercosporin production.

RESULTS

Bacillus velezensis B04 and Lysinibacillus sp. B15 isolated from leaves with leaf spot diseases were found to facilitate cercosporin secretion into the broth and then enhance the production of cercosporin. After 4 days of co-culture, Bacillus velezensis B04 allowed to increase the production of cercosporin from 128.2 mg/L to 984.4 mg/L, which was 7.68-fold of the previously reported one. Lysinibacillus sp. B15 could also enhance the production of cercosporin with a yield of 626.3 mg/L, which was 4.89-fold higher than the starting condition. More importantly, we found that bacteria B04 and B15 employed two different mechanisms to improve the production of cercosporin, in which B04 facilitated cercosporin secretion into the broth by loosening and damaging the hyphae surface of Cercospora sp. JNU001 while B15 could adsorb cercosporin to improve its secretion.

CONCLUSIONS

We here established a novel and effective co-culture method to improve the production of cercosporin by increasing its secretion ability from Cercospora sp. JNU001, allowing to develop more potential applications of cercosporin.

Recent Advances in Functionalization of Pyrroles and their Translational Potential

Among the known aromatic nitrogen heterocycles, pyrrole represents a privileged aromatic heterocycle ranging its occurrence in the key component of "pigments of life" to biologically active natural products to active pharmaceuticals. Pyrrole being an electron-rich heteroaromatic compound, its predominant functionalization is legendary to aromatic electrophilic substitution reactions. Although a few excellent reviews on the functionalization of pyrroles including the reports by Baltazzi in 1963, Casiraghi and Rassu in 1995, and Banwell in 2006 are available, they are fragmentary and over fifteen years old, and do not cover the modern aspects of catalysis. A review covering a comprehensive package of direct functionalization on pyrroles via catalytic and non-catalytic methods including their translational potential is described. Subsequent to statutory yet concise introduction, the classical functionalization on pyrroles using Lewis acids largely following an ionic mechanism is discussed. The subsequent discussion follows the various metal-catalyzed C-H functionalization on pyrroles, which are otherwise difficult to implement by Lewis acids. A major emphasize is given on the radical based pyrrole functionalization under metal-free oxidative conditions, which is otherwise poorly highlighted in the literature. Towards the end, the current development of pyrrole functionalization under photocatalyzed and electrochemical conditions is appended. Only a selected examples of substrates and important mechanisms are discussed for different methods highlighting their scopes and limitations. The aromatic nucleophillic substitution on pyrroles (being an electron-rich heterocycle) happened to be the subject of recent investigations, which has also been covered accentuating their underlying conceptual development. Despite great achievements over the past several years in these areas, many challenges and problems are yet to be solved, which are all discussed in summary and outlook.

Visible-Light-Promoted C2 Selective Arylation of Quinoline and Pyridine N-Oxides with Diaryliodonium Tetrafluoroborate

A protocol of visible-light-promoted C2 selective arylation of quinoline and pyridine N-oxides, with diaryliodonium tetrafluoroborate as an arylation reagent, using eosin Y as a photocatalyst for the construction of N-heterobiaryls was presented. This methodology provided an efficient way for the synthesis of 2-aryl-substituted quinoline and pyridine N-oxides. This strategy has the following advantages: specific regioselectivity, simple operation, good functional group tolerance, and high to moderate yields under mild conditions.

Emodin as a novel organic photocatalyst for selective oxidation of sulfides under mild conditions

Herein, we have developed naturally-occurring Emodin, which is commercially available at low-cost, as a novel organic photocatalyst for the first time. Emodin was successfully employed in the selective oxidation of sulfides promoted by visible-light, delivering valuable sulfoxides with high efficiency. Mechanistic investigations suggested both single-electron transfer (SET) and energy transfer (EnT) pathways might be involved in the oxidation reaction.

Naturally-occurring Emodin was successfully employed in the selective oxidation of sulfides promoted by visible-light as a novel organic photocatalyst for the first time.

Redox reactions of small organic molecules using ball milling and piezoelectric materials

Over the past decade, photoredox catalysis has harnessed light energy to accelerate bond-forming reactions. We postulated that a complementary method for the redox-activation of small organic molecules in response to applied mechanical energy could be developed through the piezoelectric effect. Here, we report that agitation of piezoelectric materials via ball milling reduces aryl diazonium salts. This mechanoredox system can be applied to arylation and borylation reactions under mechanochemical conditions.

Cercosporin-photocatalyzed sp3 (C-H) activation for the synthesis of pyrrolo[3,4-c]quinolones

We reported a new method that visible light along with cercosporin, one of the naturally occurring perylenequinonoid pigments with excellent properties of photosensitization, photocatalyzed sp³ (C-H) activation for the synthesis of pyrrolo[3,4-c]quinolones through the annulation of anilines and maleimides under mild conditions.