Air-Stable Boranes and Borinanes Encapsulated in Organogels for Anionic Ring-Opening (Co)Polymerization

Organoborane reagents play a pivotal role as Lewis acids in acid-base pairs used in anionic polymerization and in other reactions; yet their high sensitivity to oxygen and moisture necessitates effective stabilization to prevent their oxidation and thus maintain their catalytic activity. In this study, we present novel encapsulation methods employing a cost-effective hexatriacontane (C36H74, C36) organogel to stabilize sensitive organoborane reagents, including triethyl borane (TEB) and a borinane-based ammonium salt (B3NBr). These organoboranes encapsulated in stable, self-standing organogel blocks enable their safe handling in open laboratory environments without the need for a glovebox. Upon heating such borane-containing organogel blocks organoboranes could be freed from the organogel and used to mediate both the homopolymerization of propylene oxide (PO) and the copolymerization of PO with CO2. Furthermore, efficient recovery of the C36 gelator from polymerization mixtures is achieved, with mass recovery ranging from 70 % to 90 %. This encapsulation method offers a practical and efficient solution for stabilizing, storing, and handling highly reactive organoborane reagents, thereby broadening their applicability and utilization in various chemical transformations.

C-H Functionalization of Poly(ethylene oxide) - Embracing Functionality, Degradability, and Molecular Delivery

This study presents an organocatalytic C-H functionalization approach for postpolymerization modification (PPM) of poly(ethylene oxide) (PEO). Most of PEO PPM is previously processed at the end hydroxy group, but recent advances in C-H functionalization open a way to modify the backbone position. Structurally diverse carboxylic acids are attached to PEO through a cascade process of radical generation by peroxide and oxidation to oxocarbenium by tertiary butylammonium iodide. Attaching carboxylic acids yields a series of functionalize PEO with acetal units (2-5 mol%) in a backbone, which is not accessible via conventional copolymerization of epoxides. The optimized conditions minimizes the uncontrolled degradation or crosslinking from the highly reactive radical and oxocarbenium intermediate. The newly introduced acetal units bring degradability of PEO as well as delivery of carboxylic acid molecules. Hydrolysis studies with high molecular weight functionalization PEO (Mn = 13.0 kg mol-1) confirm the steady release of fragmented PEO (Mn ∼ 2.0 kg mol-1) and carboxylic acid over days and the process rate is not sensitive to pH variation between pH 5 and 9. The presented method offers a versatile and efficient way to modify PEO with potential energy and medical applications.

Organoboron-mediated polymerizations

The scientific community has witnessed extensive developments and applications of organoboron compounds as synthetic elements and metal-free catalysts for the construction of small molecules, macromolecules, and functional materials over the last two decades. This review highlights the achievements of organoboron-mediated polymerizations in the past several decades alongside the mechanisms underlying these transformations from the standpoint of the polymerization mode. Emphasis is placed on free radical polymerization, Lewis pair polymerization, ionic (cationic and anionic) polymerization, and polyhomologation. Herein, alkylborane/O2 initiating systems mediate the radical polymerization under ambient conditions in a controlled/living manner by careful optimization of the alkylborane structure or additives; when combined with Lewis bases, the selected organoboron compounds can mediate the Lewis pair polymerization of polar monomers; the bicomponent organoboron-based Lewis pairs and bifunctional organoboron-onium catalysts catalyze ring opening (co)polymerization of cyclic monomers (with heteroallenes, such as epoxides, CO2, CO, COS, CS2, episulfides, anhydrides, and isocyanates) with well-defined structures and high reactivities; and organoboranes initiate the polyhomologation of sulfur ylides and arsonium ylides providing functional polyethylene with different topologies. The topological structures of the produced polymers via these organoboron-mediated polymerizations are also presented in this review mainly including linear polymers, block copolymers, cyclic polymers, and graft polymers. We hope the summary and understanding of how organoboron compounds mediate polymerizations can inspire chemists to apply these principles in the design of more advanced organoboron compounds, which may be beneficial for the polymer chemistry community and organometallics/organocatalysis community.

Catalytically Controlled Ring-Opening Polymerization of 2-Oxo-15-crown-5 for Degradable and Recyclable PEG-Like Polyesters

Poly(ethylene glycol) (PEG) has been extensively used in diverse applications. However, it is not biodegradable and shows abnormal immune responses. Herein, a fast, controlled, ring-opening polymerization (ROP) of 2-oxo-15-crown-5 (O-15C5) is reported to prepare well-defined PEG-like polyesters, poly(O-15C5). This approach relies on a coordination between the macrocyclic monomer and Na⁺ that increases the electrophilicity of the carbonyl group of O-15C5 and leads to a fast controlled ROP (dispersity, Đ_M < 1.2). Both computational and mechanistic studies show that the selective Na⁺ binding to the monomer over poly(O-15C5) allows the ring-opening initiation and propagation to be more energetically favorable than side transesterifications. This is the key to control the challenging entropy-driven ROP of O-15C5. Moreover, with the aid of Na⁺ and organic base, poly(O-15C5) depolymerized readily into O-15C5 in 2 h. Also, it degraded in a buffer of pH 7.4 by hydrolysis.

Using Triethylborane to Manipulate Reactivity Ratios in Epoxide-Anhydride Copolymerization: Application to the Synthesis of Polyethers with Degradable Ester Functions

The anionic ring-opening copolymerization (ROCOP) of epoxides, namely of ethylene oxide (EO), with anhydrides (AH) generally produces strictly alternating copolymers. With triethylborane (TEB)-assisted ROCOP of EO with AH, statistical copolymers of high molar mass including ether and ester units could be obtained. In the presence of TEB, the reactivity ratio of EO (rEO), which is normally equal to 0 in its absence, could be progressively raised to values lower than 1 or higher than 1. Conditions were even found to obtain rEO equal or close to 1. Samples of P(EO-co-ester) with minimal compositional drift could be synthesized; upon basic degradation of their ester linkages, these samples afforded poly(ethylene oxide) (PEO) diol samples of narrow molar mass distribution. In other cases where rEO were lower or higher than 1, the PEO diol samples eventually isolated after degradation exhibited a broader distribution of molar masses because of the compositional drift of initial P(EO-co-ester) samples.

Chemoselective Ring-Opening Copolymerization of Five-Membered Cyclic Carbonates and Carbonyl Sulfide toward Poly(thioether)s

Five-membered cyclic carbonate (5-CC) has the advantages of wide availability, low toxicity, and low volatility, but extremely low ring strain makes it a thermodynamically "non-polymerizable" monomer. This work, for the...

Selective ring-opening polymerization of glycidyl ester: a versatile synthetic platform for glycerol-based (co)polyethers

Linear polyglycerol is highly valued for its excellent hydrophilicity and biocompatibility as well as its multihydroxy nature. We report here a convenient route for controlled synthesis of polyglycerol through ring-opening...

Unprecedentedly high active organocatalysts for the copolymerization of carbonyl sulfide and propylene oxide: steric hindrance effect of tertiary amines

The TEB/DMCHA pair shows exceedingly high turnover frequency of 69 800 h−1 for organocatalytic COS/PO copolymerization at 60 °C under solvent-free conditions.

Synthesis of polyethers from epoxides via a binary organocatalyst system

We present a binary catalyst system, in which triphenylboroxin (TPBX) is employed as a catalyst in conjunction with bis-(triphenylphosphine)iminium chloride (PPNCl) as the initiator, for the ROP of epoxides to precisely synthesize polyethers.

Selective polymerization of epoxides from hydroxycarboxylic esters: expediting controlled synthesis of α-carboxyl-ω-hydroxyl polyethers

Selective ring-opening polymerization of ethylene/propylene oxide from hydroxyl-functionalized carboxylic esters is achieved by use of metal-free Lewis pair catalysts. Subsequently, quantitative in situ hydrolysis is conducted to afford well-defined α-carboxyl-ω-hydroxyl polyethers which are highly valuable for bioconjugation but usually synthesized by much more tedious and costly routes.

Acid-Cleavable Poly(ethylene glycol) Hydrogels Displaying Protein Release at pH 5

PEG is the gold standard polymer for pharmaceutical applications, however it lacks degradability. Degradation under physiologically relevant pH as present in endolysosomes, cancerous and inflammatory tissues is crucial for many areas. The authors present anionic ring-opening copolymerization of ethylene oxide with 3,4-epoxy-1-butene (EPB) and subsequent modification to introduce acid-degradable vinyl ether groups as well as methacrylate (MA) units, enabling radical cross-linking. Copolymers with different molar ratios of EPB, molecular weights (Mn ) up to 10 000 g mol-1 and narrow dispersities (Đ<1.05) were prepared. Both the P(EG-co-isoEPB)MA copolymer and the hydrogels showed pH-dependent, rapid hydrolysis at pH 5-6 and long-term storage stability at neutral pH (pH 7.4). By designing the degree of polymerization and content of degradable vinyl ether groups, the release time of an entrapped protein OVA-Alexa488 can be tailored from a few hours to several days (hydrolysis half-life time t1/2 at pH 5: 13 h to 51 h).

Lewis pair catalyzed highly selective polymerization for the one-step synthesis of AzCy(AB)xCyAz pentablock terpolymers

A Et₃B/DBU pair with a 2/1 feed ratio allowed for the chemoselective control and kinetic control over terpolymerization of epoxides, anhydrides and rac-lactides, affording unique A_zC_y(AB)_xC_yA_z pentablock terpolymers in a one-step procedure.

Chemoselective Polymerization of Epoxides from Carboxylic Acids: Direct Access to Esterified Polyethers and Biodegradable Polyurethanes

Carboxylic-acid-initiated ring-opening polymerization (ROP) of epoxides is a fast approach to esterified polyethers which are cleavable at the termini or centers. A major challenge lies in conventional ROP methods because of the lability of ester groups formed in the initiation step. Here, we describe chemoselective ROP of epoxides from aliphatic, aromatic, and methacrylic carboxylic acids using two-component metal-free catalysts. Transesterification is clearly absent so that well-defined α-(carboxylic ester)-ω-hydroxy polyethers are generated in one step from monocarboxylic acids. The livingness of the ROP is verified despite the slow initiation mode. The ester end group can be readily cleaved from the polyether hydrolytically. An α,ω-dihydroxy poly(propylene oxide) with two central ester groups is generated from a diacid initiator and transformed in situ by the same catalyst to polyurethane which shows distinct enzymatic degradability. This study provides convenient access to α,ω-heterobifunctional polyethers with cleavable, releasable, or modifiable end groups and to biodegradable polyether-based materials.