Advanced stimuli-responsive membranes for smart separation

Membranes have been extensively studied and applied in various fields owing to their high energy efficiency and small environmental impact. Further conferring membranes with stimuli responsiveness can allow them to dynamically tune their pore structure and/or surface properties for efficient separation performance. This review summarizes and discusses important developments and achievements in stimuli-responsive membranes. The most commonly utilized stimuli, including light, pH, temperature, ions, and electric and magnetic fields, are discussed in detail. Special attention is given to stimuli-responsive control of membrane pore structure (pore size and porosity/connectivity) and surface properties (wettability, surface topology, and surface charge), from the perspective of determining the appropriate membrane properties and microstructures. This review also focuses on strategies to prepare stimuli-responsive membranes, including blending, casting, polymerization, self-assembly, and electrospinning. Smart applications for separations are also reviewed as well as a discussion of remaining challenges and future prospects in this exciting field. This review offers critical insights for the membrane and broader materials science communities regarding the on-demand and dynamic control of membrane structures and properties. We hope that this review will inspire the design of novel stimuli-responsive membranes to promote sustainable development and make progress toward commercialization.

Synthesis of zwitterionic polyelectrolyte nanogels via electrostatic-templated polymerization

Zwitterionic polyelectrolyte nanogels are prospective nanocarriers due to their soft loading pocket and regulated charges. We here report a facile strategy, namely, electrostatic-templated polymerization (ETP) for synthesizing zwitterionic nanogels with controlled size and properties. Specifically, with anionic-neutral diblock polymers as the template, zwitterionic monomers such as carboxybetaine methacrylate (CBMA) or carboxybetaine acrylamide (CBAA) are polymerized together with a cross-linker at pH 2 where the monomers exhibit only positive charge due to the protonation of the carboxyl group. The obtained polyelectrolyte complex micelles dissociate upon introducing a concentrated salt. The subsequent separation yields the released template and zwitterionic nanogels with regulated size and swelling ability, achieved by tuning the salt concentration and cross-linker fraction during polymerization. The obtained PCBMA nanogels exhibit charges depending on the pH, which enables not only the selective loading of different dye molecules, but also encapsulation and intracellular delivery of cytochrome c protein. Our study develops a facile and robust way for fabricating zwitterionic nanogels and validates their potential applications as promising nanocarriers for load and delivery of functional charged cargos.

Polyelectrolytes for Enzyme Immobilization and the Regulation of Their Properties

In this review, we considered aspects related to the application of polyelectrolytes, primarily synthetic polyanions and polycations, to immobilize enzymes and regulate their properties. We mainly focused on the description of works in which polyelectrolytes were used to create complex and unusual systems (self-regulated enzyme-polyelectrolyte complexes, artificial chaperones, polyelectrolyte brushes, layer-by-layer immobilization and others). These works represent the field of "smart polymers", whilst the trivial use of charged polymers as carriers for adsorption or covalent immobilization of proteins is beyond the scope of this short review. In addition, we have included a section on the molecular modeling of interactions between proteins and polyelectrolytes, as modeling the binding of proteins with a strictly defined, and already known, spatial structure, to disordered polymeric molecules has its own unique characteristics.

UCST-Type Polymer Capsules Formed by Interfacial Complexation

Formation of aqueous-core polymer capsules exhibiting an upper critical solution temperature (UCST) was achieved using surfactant-polymer interfacial complexation in water-in-oil inverse emulsions. In fluorinated oil, Coulombic interactions between Krytox, an anionic oil-soluble surfactant, and a cationic poly(lysine) grafted with poly(acrylamide-co-acrylonitrile) enabled the formation of an adsorbed polymer shell at the surface of water droplets. The thermoresponsiveness of the polymer shell was assessed by fluorescence microscopy with and without the presence of nanoparticles, including gold particles. We show that, above the cloud point, polymers with a balanced fraction of UCST grafts form flat adlayers that (i) spontaneously entrap nanoparticles upon cooling and (ii) switch from fluid-like dynamics at high temperature to solid-like dynamics below the cloud point. This system offers a straightforward mean to prepare temperature-sensitive capsules in mild, biocompatible conditions and to concentrate nanoparticles (including nanoheaters) in their shell.

Zwitterionic Nanocapsules with Salt- and Thermo-Responsiveness for Controlled Encapsulation and Release

Intelligent polymer nanocapsules that can not only encapsulate substances efficiently but also release them in a controllable manner hold great potential in many applications. To date, although intensive efforts have been made to develop intelligent polymer nanocapsules, how to construct the well-defined core/shell structure with high stability via a straightforward method remains a considerable challenge. In this work, the target novel zwitterionic nanocapsules (ZN_Cs) with a stable hollow structure were synthesized by inverse reversible addition fragmentation transfer (RAFT) miniemulsion interfacial polymerization. The shell gradually grew from the water/oil interface due to the interfacial polymerization, accompanied by the cross-linking of the polyzwitterionic networks, where the core/shell structure could be well-tuned by adjusting the precursor compositions. The resultant ZN_Cs exhibited a salt-/thermo-induced swelling behavior through the phase transition of the external zwitterionic polymers. To further investigate the functions of ZN_Cs, different substances, such as methyl orange and bovine serum albumin (BSA), were encapsulated into the ZN_Cs with a high encapsulation efficiency of 89.3 and 93.6%, respectively. Interestingly, the loaded substances can be controllably released in aqueous solution triggered by salt or temperature variations, and such responsiveness also can be utilized to bounce off the bacteria adhered on target surfaces. We believe that these designed salt- and thermo-responsive intelligent polymer nanocapsules with well-defined core/shell structures and antifouling surfaces should be a promising platform for biomedical and saline related applications.

Zwitterionic nanogels with temperature sensitivity and redox-degradability for controlled drug release

Zwitterionic polymers play an attractive role in the application of stealthy nanocarriers for their excellent antifouling property. Herein, a zwitterionic nanogel with temperature sensitivity and redox-responsive degradability prepared by copolymerization of N-vinylcaprolactam (VCL) and 2-(methacryloyloxy) ethyldimethyl-(3-sulfopropyl) ammonium hydroxide (DMAPS) via aqueous precipitation polymerization. The prepared nanogels own ultra-high colloidal stability and non-specific protein adsorption resistance as a result of the incorporation of zwitterionic groups. Meanwhile, they exhibit sensitive temperature-induced swelling/collapse transition in aqueous solution and excellent redox-degradability ascribed to the presence of disulfide bonds. The nanogels loaded with anticancer drug doxorubicin (DOX) exhibit low leakage of DOX under physiological conditions (merely 23.8 % within 24 h), whereas striking release amount of DOX under reducing conditions combined with elevated temperature (93.4 % within 24 h). The measurement of cell viability showed that the cytotoxicity of blank nanogels to tumor cells (HeLa cells) was negligible, while the nanogels loaded with DOX had a prominent inhibitory impact on tumor cells.

Zwitterionic Nanogels and Microgels: An Overview on Their Synthesis and Applications

Zwitterionic polymers by virtue of their unique chemical and physical attributes have attracted researchers in recent years. The simultaneous presence of positive and negative charges in the same repeat unit renders them of various interesting properties such as superhydrophilicity, which has significantly broadened their scope for being used in different applications. Among polyzwitterions of different architectures, micro- and/or nano-gels have started receiving attention only until recently. These 3D cross-linked colloidal structures show peculiar characteristics in context to their solution properties, which are attributable either to the comonomers present or the presence of different electrolytes and biological specimens. In this review, a concise yet detailed account is provided of the different synthetic techniques and application domains of zwitterion-based micro- and/or nanogels that have been explored in recent years. Here, the focus is kept solely on the "polybetaines," which have garnered maximum research interest and remain the extensively studied polyzwitterions in literature. While their vast application potential in the biomedical sector is being detailed here, some other areas of scope such as using them as microreactors for the synthesis of metal nanoparticles or making smart membranes for water-treatment are discussed in this minireview as well.

Nanogels Capable of Triggered Release

This chapter provides an overview of soft and environmentally sensitive polymeric nanosystems, which are widely known as nanogels. These particles keep great promise to the area of drug delivery due to their high biocompatibility with body fluids and tissues, as well as due to their ability to encapsulate and release the loaded drugs in a controlled manner. For a long period of time, the controlled drug delivery systems were designed to provide long-termed or sustained release. However, some medical treatments such as cancer chemotherapy, protein and gene delivery do not require the prolonged release of the drug in the site of action. In contrast, the rapid increase of the drug concentration is needed for gaining the desired biological effect. Being very sensitive to surrounding media and different stimuli, nanogels can undergo physico-chemical transitions or chemical changes in their structure. Such changes can result in more rapid release of the drugs, which is usually referred to as triggered drug release. Herein we give the basic information on nanogel unique features, methods of sensitive nanogels preparation, as well as on main mechanisms of triggered release. Additionally, the triggered release of low-molecular drugs and biomacromolecules are discussed.