3D-Printed MOF Monoliths: Fabrication Strategies and Environmental Applications

Metal-organic frameworks (MOFs) have been extensively considered as one of the most promising types of porous and crystalline organic-inorganic materials, thanks to their large specific surface area, high porosity, tailorable structures and compositions, diverse functionalities, and well-controlled pore/size distribution. However, most developed MOFs are in powder forms, which still have some technical challenges, including abrasion, dustiness, low packing densities, clogging, mass/heat transfer limitation, environmental pollution, and mechanical instability during the packing process, that restrict their applicability in industrial applications. Therefore, in recent years, attention has focused on techniques to convert MOF powders into macroscopic materials like beads, membranes, monoliths, gel/sponges, and nanofibers to overcome these challenges.Three-dimensional (3D) printing technology has achieved much interest because it can produce many high-resolution macroscopic frameworks with complex shapes and geometries from digital models. Therefore, this review summarizes the combination of different 3D printing strategies with MOFs and MOF-based materials for fabricating 3D-printed MOF monoliths and their environmental applications, emphasizing water treatment and gas adsorption/separation applications. Herein, the various strategies for the fabrication of 3D-printed MOF monoliths, such as direct ink writing, seed-assisted in-situ growth, coordination replication from solid precursors, matrix incorporation, selective laser sintering, and digital light processing, are described with the relevant examples. Finally, future directions and challenges of 3D-printed MOF monoliths are also presented to better plan future trajectories in the shaping of MOF materials with improved control over the structure, composition, and textural properties of 3D-printed MOF monoliths.

Chemical shaping of CPO-27-M (M = Co, Ni) through an in situ crystallization within chitosan hydrogels

The preparation of MOF composites is considered as an effective method to address the challenges of shaping MOFs and to create porous solids with enhanced properties and broader applications. In this study, CPO-27-Co was crystallized via a simple strategy within porous chitosan beads. The resulting CS@CPO-27-Co composites were tested for CO2 sorption and they demonstrated promising performances by exceeding 3 mmol(CO2) g-1. The versatility of this strategy was further demonstrated by replacing cobalt(II) ions with nickel(II), also leading to the isostructural CPO-27 framework.

Chitosan as Support Material for Metal-Organic Framework based Catalysts

Turning waste into valuable products is one of the main challenges of the chemical industry. In this work, chitosan (CS), an abundant, low-cost, and non-toxic biopolymer derived from chitin, was reshaped into beads of ~3 mm. Their suitability as a support material for active phase catalyst materials was tested for a zirconium-based Metal-Organic Framework (MOF) with incorporated Pt, namely UiO-67-Pt. Its incorporation was investigated via two procedures: a one-pot synthesis (OPS) and a post-synthetic functionalization (PSF) synthesis method. Scanning electron microscopy (SEM) images show good UiO-67-Pt dispersion throughout the CS beads for the one-pot synthesized material (UiO-67-Pt-OPS@CS). However, this uniform dispersion was not observed for the post-synthetically functionalized material (UiO-67-Pt-PSF@CS). The success of the implementation of UiO-67-Pt was evaluated with ultraviolet-visible and infrared spectroscopy for both composite materials. Thermogravimetric analysis (TGA) reveals higher thermal stabilities for UiO-67-Pt-OPS@CS composite beads in comparison to pure CS beads, but not for UiO-67-Pt-PSF@CS. The study provides valuable insights into the potential of chitosan as a green, bead-shaped support material for MOFs, offering flexibility in their incorporation through different synthesis routes. It further contributes to the broader goal of the sustainable and eco-friendly design of a new generation of catalysts made from waste materials, which will be the topic of future studies.

A Versatile Shaping Method of Very-High Loading Porous Solids Paper Adsorbent Composites

Owing to their high porosity and tunability, porous solids such as metal-organic frameworks (MOFs), zeolites, or activated carbons (ACs) are of great interest in the fields of air purification, gas separation, and catalysis, among others. Nonetheless, these materials are usually synthetized as powders and need to be shaped in a more practical way that does not modify their intrinsic property (i.e., porosity). Elaborating porous, freestanding and flexible sheets is a relevant shaping strategy. However, when high loadings (>70 wt.%) are achieved the mechanical properties are challenged. A new straightforward and green method involving the combination softwood bleached kraft pulp fibers (S) and nano-fibrillated cellulose (NFC) is reported, where S provides flexibility while NFC acts as a micro-structuring and mechanical reinforcement agent to form high loadings porous solids paper sheets (>70 wt.%). The composite has unobstructed porosity and good mechanical strength. The sheets prepared with various fillers (MOFs, ACs, and zeolites) can be rolled, handled, and adapted to different uses, such as air purification. As an example of potential application, a MOF paper composite has been considered for the capture of polar volatile organic compounds exhibiting better performance than beads and granules.

Phosphorus removal from water by the metal-organic frameworks (MOFs)-based adsorbents: A review for structure, mechanism, and current progress

Efficacious phosphate removal is essential for mitigating eutrophication in aquatic ecosystems and complying with increasingly stringent phosphate emission regulations. Chemical adsorption, characterized by simplicity, prominent treatment efficiency, and convenient recovery, is extensively employed for profound phosphorus removal. Metal-organic frameworks (MOFs)-derived metal/carbon composites, surpassing the limitations of separate components, exhibit synergistic effects, rendering them tremendously promising for environmental remediation. This comprehensive review systematically summarizes MOFs-based materials' properties and their structure-property relationships tailored for phosphate adsorption, thereby enhancing specificity towards phosphate. Furthermore, it elucidates the primary mechanisms influencing phosphate adsorption by MOFs-based composites. Additionally, the review introduces strategies for designing and synthesizing efficacious phosphorus capture and regeneration materials. Lastly, it discusses and illuminates future research challenges and prospects in this field. This summary provides novel insights for future research on superlative MOFs-based adsorbents for phosphate removal.

Effective Strategy toward Obtaining Reliable Breakthrough Curves of Solid Adsorbents

Metal-organic frameworks (MOFs) have demonstrated their versatility in a wide range of applications, including chemical separation, gas capture, and storage. In industrial adsorption processes, MOFs are integral to the creation of selective gas adsorption fixed beds. In this context, the assessment of their separation performance under relevant conditions often relies on breakthrough experiments. One aspect frequently overlooked in these experiments is the shaping of MOF powders, which can significantly impact the accuracy of breakthrough results. In this study, we present an approach for immobilizing MOF particles on the surface of glass beads (GBs) utilizing trimethylolpropane triglycidyl ether (TMPTGE) as a binder, leading to the creation of MOF@GB materials. We successfully synthesized five targeted MOF composites, namely, SIFSIX-3-Ni@GB, CALF-20@GB, UiO-66@GB, HKUST-1@GB, and MOF-808@GB, each possessing distinct pore sizes and structural topologies. Characterization studies employing powder X-ray diffraction and adsorption isotherm analyses demonstrated that MOFs@GB retained their crystallinity and 73-90% of the Brunauer-Emmett-Teller area of their parent MOFs. Dynamic breakthrough experiments revealed that, in comparison to their parent MOFs, MOF@GB configurations enhanced the accuracy of breakthrough measurements by mitigating pressure buildup and minimizing reductions in the gas flow rate. This work underscores the significance of meticulous experimental design, specifically in shaping MOF powders, to optimize the efficacy of breakthrough experiments. Our proposed strategy aims to provide a versatile platform for MOF powder processing, thereby facilitating more reliable breakthrough experiments.

Experimental and theoretical studies of the efficiency of metal-organic frameworks (MOFs) in preventing aluminum corrosion in hydrochloric acid solution

Aluminum corrosion inhibitors "{[CuI (CN)2(phen) CuII (CN)2(phen)]5H2O},(MOF1) and {[CuI(CN)2(phen)CuII(CN)2(phen)]5H2O}@TiO2 (MOF1@TiO2) were studied in one molar HCl solution". The ML results for three different temperatures (25-45 °C) were compared with the results of PDP and EIS analyses. The adsorption of inhibitors on Al surfaces has been calculated and discussed by a Langmuir isotherm. The inhibitors that were created showed great effectiveness, with a noticeable increase in their inhibitory efficiency as the dosage was raised and the temperature was lowered. Inhibition efficiency each amounted to 88.6%, 84.5% at 400 ppm and 25 °C for MOF1@TiO2 and MOF1, respectively. Analyzing the polarization curves of synthesized inhibitors revealed that they were mixed-type inhibitors. Al was found to be surface inhibited when coated with a thin film of inhibitors, and "Al's surface morphology was assessed by different techniques such as scanning electron microscopy (SEM), energy dispersive X-ray (EDX) and atomic force microscope (AFM)". "Theoretical models like quantum chemical and molecular dynamics simulation authenticated the experimental observation". The MOFs exhibit exceptional corrosion resistance against Al when exposed to acidic environments, according to several tests.

Hierarchical Amino-Functionalized Ionic Liquids@MOF Composite Gel for Catalytic Conversion of CO2

Hybridization of metal-organic frameworks (MOFs) and homogeneous ionic liquids (ILs) endows the heterogeneous composite with high porosity and accessible multiple active sites (e.g., acidic or basic sites), which exhibits great potential in CO2 capture and conversion. Nevertheless, the majority of MOF composites are synthesized as powders, significantly restricting their practical applications due to inherent problems such as poor handling properties, high pressure drops, and mechanical instability. Thus, it is crucial to shape MOF composites into various monoliths that allow efficient processing, especially for industrial purposes. In this work, a hierarchical ILs@nanoMOF composite gel (H-IL@UiO-66-gel) featuring both intraparticle micropores and interparticle mesopores and multiple active sites was successfully fabricated by a two-step approach. Benefiting from the integrated advantages of the hierarchically porous MOF for enhanced mass transfer and affinity of ILs for activating CO2 molecules, the resultant H-IL@UiO-66-gel exhibits excellent uptake of macromolecules and catalytic activity toward CO2 cycloaddition with epoxides under moderate conditions, far beyond the traditional microporous IL@UiO-66-gel and unfunctionalized H-UiO-66-gel. Furthermore, the H-IL@UiO-66 composite monolith can be effortlessly separated and reused at least three times without depletion of catalytic activity. It is believed that this fabrication method for the shaping of MOF composites is highly versatile and can be extended to other types of MOFs for various application fields.

Interfacing metal organic frameworks with polymers or carbon-based materials: from simple to hierarchical porous and nanostructured composites

In the past few years, metal organic frameworks (MOFs) have been assembled with (bio)polymers and a series of carbon-based materials (graphene, graphene oxide, carbon nanotubes, carbon quantum dots, etc.) leading to a wide range of composites differing in their chemical composition, pore structure and functionality. The objective was mainly to overcome the limitations of MOFs in terms of mechanical properties, chemical stability and processability while imparting novel functionality (electron conductivity, (photo)catalytic activity, etc.) and hierarchical porosity. These composites were considered for numerous applications including gas/liquid adsorption and separation, (photo)catalysis, biomedicine, energy storage, conversion and so on. The performance of such composites depends strongly on their microstructural and physico-chemical properties which are mainly driven by the chemical strategies used to design and process such composites. In this perspective article, we propose to cover this topic and provide a useful survey of recent progress in the synthesis and design of MOFs-carbon material composites. This article will describe the development of composites with increasing complexity in terms of porous architecture, spatial structuration and organisation, and functionality.

Postsynthetic Photochemical Modification and 2D Structuring of Zr-MOF Thin Films Containing Benzophenone Linker Molecules

For the fabrication of next-generation MOF-based devices the availability of highly adaptable materials in suitable shapes is crucial. Here, we present thin films of a metal-organic framework (MOF) containing photoreactive benzophenone units. Crystalline, oriented and porous films of the zirconium-based bzpdc-MOF (bzpdc=benzophenone-4-4'-dicarboxylate) are prepared by direct growth on silicon or glass substrates. Via a subsequent photochemical modification of the Zr-bzpdc-MOF films, various properties can be tuned postsynthetically by covalent attachment of modifying agents. Apart from the modification with small molecules, also grafting-from polymerization reactions are possible. In a further extension, 2D structuring and photo-writing of defined structures is also possible, for example by using a photolithographic approach, paving the way towards micro-patterned MOF surfaces.

Microscopic insight into the shaping of MOFs and its impact on CO2 capture performance

The traditional synthesis method produces microcrystalline powdered MOFs, which prevents direct implementation in real-world applications which demand strict control of shape, morphology and physical properties. Therefore, shaping of MOFs via the use of binders is of paramount interest for their practical use in gas adsorption/separation, catalysis, sensors, etc. However, so far, the binders have been mostly selected by trial-and-error without anticipating the adhesion between the MOF and binder components to ensure the processability of homogeneous and mechanically stable shaped MOFs and the impact of the shaping on the intrinsic properties of the MOFs has been overlooked. Herein, we deliver a first systematic multiscale computational exploration of MOF/binder composites by selecting CALF-20, a prototypical MOF for real application in the field of CO2 capture, and a series of binders that cover a rather broad spectrum of properties in terms of rigidity/flexibility, porosity, and chemical functionality. The adhesion between the two components and hence the effectiveness of the shaping as well as the impact of the overall porosity of the CALF-20/binder on the CO2/N2 selectivity, CO2 sorption capacity and kinetics was analyzed. Shaping of CALF-20 by carboxymethyl cellulose was predicted to enable a fair compromise between excellent adhesion between the two components, whilst maintaining high CO2/N2 selectivity, large CO2 uptake and CO2 transport as fast as in the CALF-20. This multiscale computational tool paves the way towards the selection of an appropriate binder to achieve an optimum shaping of a given MOF in terms of processability whilst maintaining its high level of performance.

Synthesis and photochemical modification of monolayer thin MOF flakes for incorporation in defect free polymer composites

Metal-organic frameworks (MOFs) with benzophenone linker molecules are characterized by their ability to undergo photochemical postsynthetic modification. While this approach opens up almost unlimited possibilities for tailoring materials to specific applications, the processability of the large particles is still lacking. In this work, we present a new approach to fabricate micro flakes of the stable Zr-bzpdc-MOF (bzpdc = benzophenone-4-4'-dicarboxylate) with a thickness of only a few monolayers. The crystalline and nanoporous flakes form dispersions in acetone that are stable for months. Embedding the flakes in polymer composites was investigated as one of many possible applications. Zr-bzpdc-MOF micro flakes were decorated with poly(dimethylsiloxane) (PDMS) via a photochemical postsynthetic modification and incorporated into silicon elastomers. The PDMS functionalization allows covalent cross-linking between the MOF and the polymer while maintaining the porosity of the MOF. The resulting hybrid materials provide defect-free interfaces and show preferential adsorption of CO2 over CH4, making them attractive for gas separation or sensing applications. The work should serve as a basis for bringing bzpdc-MOFs into real-world applications - in polymeric membranes, but also beyond.

Metal-Organic Framework/Polyvinyl Alcohol Composite Films for Multiple Applications Prepared by Different Methods

The incorporation of different functional fillers has been widely used to improve the properties of polymeric materials. The polyhydroxy structure of PVA with excellent film-forming ability can be easily combined with organic/inorganic multifunctional compounds, and such an interesting combining phenomenon can create a variety of functional materials in the field of materials science. The composite membrane material obtained by combining MOF material with high porosity, specific surface area, and adjustable structure with PVA, a non-toxic and low-cost polymer material with good solubility and biodegradability, can combine the processability of PVA with the excellent performance of porous filler MOFs, solving the problem that the poor machinability of MOFs and the difficulty of recycling limit the practical application of powdered MOFs and improving the physicochemical properties of PVA, maximizing the advantages of the material to develop a wider range of applications. Firstly, we systematically summarize the preparation of MOF/PVA composite membrane materials using solution casting, electrostatic spinning, and other different methods for such excellent properties, in addition to discussing in detail the various applications of MOF/PVA composite membranes in water treatment, sensing, air purification, separation, antibacterials, and so on. Finally, we conclude with a discussion of the difficulties that need to be overcome during the film formation process to affect the performance of the composite film and offer encouraging solutions.

Monolithic Zirconium-Based Metal-Organic Frameworks for Energy-Efficient Water Adsorption Applications

Space cooling and heating, ventilation, and air conditioning (HVAC) accounts for roughly 10% of global electricity use and are responsible for ca. 1.13 gigatonnes of CO₂ emissions annually. Adsorbent-based HVAC technologies have long been touted as an energy-efficient alternative to traditional refrigeration systems. However, thus far, no suitable adsorbents have been developed which overcome the drawbacks associated with traditional sorbent materials such as silica gels and zeolites. Metal-organic frameworks (MOFs) offer order-of-magnitude improvements in water adsorption and regeneration energy requirements. However, the deployment of MOFs in HVAC applications has been hampered by issues related to MOF powder processing. Herein, three high-density, shaped, monolithic MOFs (UiO-66, UiO-66-NH₂ , and Zr-fumarate) with exceptional volumetric gas/vapor uptake are developed-solving previous issues in MOF-HVAC deployment. The monolithic structures across the mesoporous range are visualized using small-angle X-ray scattering and lattice-gas models, giving accurate predictions of adsorption characteristics of the monolithic materials. It is also demonstrated that a fragile MOF such as Zr-fumarate can be synthesized in monolithic form with a bulk density of 0.76 gcm^-3 without losing any adsorption performance, having a coefficient of performance (COP) of 0.71 with a low regeneration temperature (≤ 100 °C).

Metal Oxide-Derived MOF-74 Polymer Composites through Pickering Emulsion-Templating: Interfacial Recrystallization, Hierarchical Architectures, and CO2 Capture Performances

Currently, metal-organic framework (MOF)-polymer composites are attracting great interest as a step forward in making MOFs a useful material for industrially relevant applications. However, most of the research is engaged with finding promising MOF/polymer pairs and less with the synthetic methods by which these materials are then combined, albeit hybridization has a significant impact on the properties of the new composite macrostructure. Thus, the focus of this work is on the innovative hybridization of MOFs and polymerized high internal phase emulsions (polyHIPEs), two classes of materials that exhibit porosity at different length scales. The main thrust is the in situ secondary recrystallization, i.e., growth of MOFs from metal oxides previously fixed in polyHIPEs by the Pickering HIPE-templating, and further structure-function study of composites through the CO₂ capture behavior. The combination of Pickering HIPE polymerization and secondary recrystallization at the metal oxide-polymer interface proved advantageous, as MOF-74 isostructures based on different metal cations (M²⁺ = Mg, Co, or Zn) could be successfully shaped in the polyHIPEs' macropores without affecting the properties of the individual components. The successful hybridization resulted in highly porous, co-continuous MOF-74-polyHIPE composite monoliths forming an architectural hierarchy with pronounced macro-microporosity, in which the MOF microporosity is almost completely accessible for gases, i.e., about 87% of the micropores, and the monoliths exhibit excellent mechanical stability. The well-structured porous architecture of the composites showed superior CO₂ capture performance compared to the parent MOF-74 powders. Both adsorption and desorption kinetics are significantly faster for composites. Regeneration by temperature swing adsorption recovers about 88% of the total adsorption capacity of the composite, while it is lower for the parent MOF-74 powders (about 75%). Finally, the composites exhibit about 30% improvement in CO₂ uptake under working conditions compared to the parent MOF-74 powders, and some of the composites are able to retain 99% of the original adsorption capacity after five adsorption/desorption cycles.

Fenton-like Cerium Metal–Organic Frameworks (Ce-MOFs) for Catalytic Oxidation of Olefins, Alcohol, and Dyes Degradation

A metal–organic framework (MOF) of cerium (Ce) ions and 4,4′,4′′-nitrilotribenzoic acid linker was synthesized via a hydrothermal method. Ce-MOF consists of a Lewis acid moiety, i.e. Ce3+ and triphenylamine cores. It showed Fenton-like properties with excellent catalytic oxidation activity for olefins, primary/secondary alcohols, and water pollutants e.g., organic dyes. It displayed high oxidation conversion of cinnamyl alcohol and styrene of 100% and 53%, respectively. It offered good selectivity towards styrene oxide and benzaldehyde (i.e. 75% and 100%, respectively). It was applied for the oxidative degradation of dyes e.g. rhodamine B (RhB), methyl blue (MeB), Congo red (CR), and direct blue (DB) using hydrogen peroxide (H2O2) as an oxidant. It exhibited high efficiency in the oxidative degradation of these water pollutants. The mechanistic study of oxidation involves the formation of radical hydroxyl (•OH) species. This study revealed the possibility of enhancing the oxidative catalytic performance, including oxidative degradation of organic pollutants, by employing advanced oxidation processes (AOPs) using Ce-MOF. The catalyst is recyclable five times without significantly decreasing of the material’s catalytic performance.

Saiz P, Reizabal A, Wuttke S, Celaya-Azcoaga L, Valverde A, Fernández de Luis R. A State-of-the-Art of Metal-Organic Frameworks for Chromium Photoreduction vs. Photocatalytic Water Remediation

Hexavalent chromium (Cr(VI)) is a highly mobile cancerogenic and teratogenic heavy metal ion. Among the varied technologies applied today to address chromium water pollution, photocatalysis offers a rapid reduction of Cr(VI) to the less toxic Cr(III). In contrast to classic photocatalysts, Metal-Organic frameworks (MOFs) are porous semiconductors that can couple the Cr(VI) to Cr(III) photoreduction to the chromium species immobilization. In this minireview, we wish to discuss and analyze the state-of-the-art of MOFs for Cr(VI) detoxification and contextualizing it to the most recent advances and strategies of MOFs for photocatalysis purposes. The minireview has been structured in three sections: (i) a detailed discussion of the specific experimental techniques employed to characterize MOF photocatalysts, (ii) a description and identification of the key characteristics of MOFs for Cr(VI) photoreduction, and (iii) an outlook and perspective section in order to identify future trends.

Adsorptive Capacity, Inhibitory Activity and Processing Techniques for a Copper-MOF Based on the 3,4-Dihydroxybenzoate Ligand

Due to the fast, emerging development of antibiotic-resistant bacteria, the need for novel, efficient routes to battle these pathogens is crucial; in this scenario, metal-organic frameworks (MOFs) are promising materials for combating them effectively. Herein, a novel Cu-MOF-namely 1-that displays the formula [Cu₃L₂(DMF)₂]_n (DMF = N,N-dimethylformamide) is described, synthesized by the combination of copper(II) and 3,4-dihydroxybenzoic acid (H₃L)-both having well-known antibacterial properties. The resulting three-dimensional structure motivated us to study the antibacterial activity, adsorptive capacity and processability of the MOF in the form of pellets and membranes as a proof-of-concept to evaluate its future application in devices.

Synthesis and shaping of metal-organic frameworks: a review

Metal-organic frameworks (MOFs) possess excellent advantages, such as high porosity, large specific surface area, and an adjustable structure, showing good potential for applications in gas adsorption and separation, catalysis, conductivity, sensing, magnetism, etc. However, they still suffer from significant limitations in terms of the scale-up synthesis and shaping, hindering the realization of large-scale commercial applications. Despite some attempts having been devoted to addressing this, challenges remain. In this paper, we outline the advantages and drawbacks of existing synthetic routes such as electrochemistry, microwave, ultrasonic radiation, green solvent reflux, room temperature stirring, steam-assisted transformation, mechanochemistry, and fluid chemistry in terms of scale-up production. Then, the shaping methods of MOFs such as extrusion, mechanical compaction, rolling granulation, spray drying, gel technology, embedded granulation, phase inversion, 3D printing and other shaping methods for the preparation of membranes, coatings and nanoparticles are discussed. Finally, perspectives on the large-scale synthesis and shaping of MOFs are also proposed. This work helps provide in-depth insight into the scale-up production and shaping process of MOFs and boost commercial applications of MOFs.

Magnetic Stuffed Bun-Structured Metal-Organic Framework Monoliths with Noncompromised Accessible Pores and Highly Efficient Recycling Capability

Development of industrially favorable metal-organic framework (MOF) monoliths is of paramount importance for their real-world applications. However, MOF monoliths prepared with the existing MOF shaping methods usually have seriously compromised accessible pores and suffer from inefficient and energy-intensive recycling, thereby greatly limiting their practical applications. We herein present a magnetic stuffed bun-structured MOF (mSBM) bead consisting of highly porous poly(vinyl alcohol) wraps stuffed with a binder-free powder mixture of UiO-66 and Fe₃O₄ nanoparticles. Such a unique structure and composition of the mSBM not only make its MOF component have a well-reserved crystal structure, surface area, and porosity and the corresponding accessible pores but also impart it with excellent localized magnetic induction heating (LMIH) capability that enables the sufficient heating and highly efficient recycling of the mSBM. These merits of mSBMs are further exemplified by assessing their atmospheric water adsorption and LMIH-driven water desorption performance. The mSBMs exhibit well-reserved atmospheric water adsorption capacities, up to 100% LMIH-driven water desorption, excellent reusability, and durability toward the practical applications. Our current work, therefore, demonstrates a new MOF shaping strategy to produce MOF monoliths with well-defined shapes, noncompromised accessible pores, and highly efficient recycling capabilities, paving a bright avenue to accelerate the practical applications of MOF monoliths.

Functionalization of Diamine-Appended MOF-Based Adsorbents by Ring Opening of Epoxide: Long-Term Stability and CO2 Recyclability under Humid Conditions

Although diamine-appended metal-organic framework (MOF) adsorbents exhibit excellent CO₂ adsorption performance, a continuous decrease in long-term capacity during repeated wet cycles remains a formidable challenge for practical applications. Herein, we present the fabrication of diamine-appended Mg₂(dobpdc)-alumina beads (een-MOF/Al-Si-Cx; een = N-ethylethylenediamine; x = number of carbon atoms attached to epoxide) coated with hydrophobic silanes and alkyl epoxides. The reaction of epoxides with diamines in the portal of the pore afforded sufficient hydrophobicity, hindered the penetration of water vapor into the pores, and rendered the modified diamines less volatile. een-MOF/Al-Si-C17-200 (een-MOF/Al-Si-C17-y; y = 50, 100, and 200, denoting wt % of C17 with respect to the bead, respectively), with substantial hydrophobicity, showed a significant uptake of 2.82 mmol g^-1 at 40 °C and 15% CO₂, relevant to flue gas concentration, and a reduced water adsorption. The modified beads maintained a high CO₂ capacity for over 100 temperature-swing adsorption cycles in the presence of 5% H₂O and retained CO₂ separation performance in breakthrough tests under humid conditions. This result demonstrates that the epoxide coating provides a facile and effective method for developing promising adsorbents with high CO₂ adsorption capacity and long-term durability, which is a required property for postcombustion applications.

Binding Materials for MOF Monolith Shaping Processes: A Review towards Real Life Application

Metal–organic frameworks (MOFs) could be utilized for a wide range of applications such as sorption, catalysis, chromatography, energy storage, sensors, drug delivery, and nonlinear optics. However, to date, there are very few examples of MOFs exploited on a commercial scale. Nevertheless, progress in MOF-related research is currently paving the way to new industrial opportunities, fostering applications and processes interconnecting fundamental chemistry with engineering and relevant sectors. Yet, the fabrication of porous MOF materials within resistant structures is a key challenge impeding their wide commercial use for processes such as adsorptive separation. In fact, the integration of nano-scale MOF crystallic structures into bulk components that can maintain the desired characteristics, i.e., size, shape, and mechanical stability, is a prerequisite for their wide practical use in many applications. At the same time, it requires sophisticated shaping techniques that can structure nano/micro-crystalline fine powders of MOFs into diverse types of macroscopic bodies such as monoliths. Under this framework, this review aims to bridge the gap between research advances and industrial necessities for fostering MOF applications into real life. Therefore, it critically explores recent advances in the shaping and production of MOF macro structures with regard to the binding materials that have received little attention to date, but have the potential to give new perspectives in the industrial applicability of MOFs. Moreover, it proposes future paths that can be adopted from both academy and industry and can further boost MOF exploitation.

ZrBDC-Based Functional Adsorbents for Small-Scale Methane Storage Systems

Metal-organic frameworks (MOF), potentially porous coordination structures, are envisioned for adsorption-based natural gas (ANG) storage, including mobile applications. The factors affecting the performance of the ANG system with a zirconium-based MOF with benzene dicarboxylic acid as a linker (ZrBDC) as an adsorbent were considered: textural properties of the adsorbent and thermal effect arising upon adsorption. The high-density ZrBDC-based pellets were prepared by mechanical compaction of the as-synthesized MOF powder at different pressures from 30 to 240 MPa at 298 K without a binder and mixed with polymer binders: polyvinyl alcohol (PVA) and carboxyl methylcellulose (CMC). The structural investigations revealed that the compaction of ZrBDC with PVA under 30 MPa was optimal to produce the ZrBDC-PVA adsorbent with more than a twofold increase in the packing density and the lowest degradation of the porous structure. The specific total and deliverable volumetric methane storage capacities of the ZrBDC-based adsorbents were evaluated from the experimental data on methane adsorption measured up to 10 MPa and within a temperature range from 253 to 333 K. It was measured experimentally that at 253 K, an 100 mL adsorption tank loaded with the ZrBDC-PVA pellets exhibited the deliverable methane storage capacity of 172 m3(NTP)/m3 when the pressure dropped from 10 to 0.1 MPa. The methane adsorption data for the ZrBDC powder and ZrBDC-PVA pellets were used to calculate the important thermodynamic characteristic of the ZrBDC/CH4 adsorption system—the differential molar isosteric heat of adsorption, which was used to evaluate the state thermodynamic functions: entropy, enthalpy, and heat capacity. The initial heats of methane adsorption in powdered ZrBDC evaluated from the experimental adsorption isosteres were found to be ~19.3 kJ/mol, and then these values in the ZrBDC/CH4 system decreased at different rates during adsorption. In contrast, the heat of methane adsorption onto the ZrBDC-PVA pellets increased from 19.4 kJ/mol to a maximum with a magnitude, width, and position depended on temperature, and then it fell. The behaviors of the thermodynamic state functions of the ZrBDC/CH4 adsorption system were interpreted as a variation in the state of adsorbed molecules determined by a ratio of CH4-CH4 and CH4-ZrBDC interactions. The heat of adsorption was used to calculate the temperature changes of the ANG systems loaded with ZrBDC powder and ZrBDC pellets during methane adsorption under adiabatic conditions; the maximum integrated heat of adsorption was found at 273 K. The maximum temperature changes of the ANG system with the ZrBDC materials during the adsorption (charging) process did not exceed 14 K that are much lower than those reported for the systems loaded with activated carbons. The results obtained are of direct relevance for designing the adsorption-based methane storage systems for the automotive industry, developing new gas-power robotics systems and uncrewed aerial vehicles.

Anion-Afforded Functions of Ionic Metal-Organic Frameworks: Ionochromism, Anion Conduction, and Catalysis

The exchangeable counterions in ionic metal-organic frameworks (IMOFs) provide facile and versatile handles to manipulate functions associated with the ionic guests themselves and host-guest interactions. However, anion-exchangeable stable IMOFs combining multiple anion-related functions are still undeveloped. In this work, a novel porous IMOF featuring unique self-penetration was constructed from an electron-deficient tris(pyridinium)-tricarboxylate zwitterionic ligand. The water-stable IMOF undergoes reversible and single-crystal-to-single-crystal anion exchange and shows selective and discriminative ionochromic behaviors toward electron-rich anions owing to donor-acceptor interactions. The IMOFs with different anions are good ionic conductors with low activation energy, the highest conductivity being observed with chloride. Furthermore, integrating Lewis acidic sites and nucleophilic guest anions in solid state, the IMOFs act as heterogeneous and recyclable catalysts to efficiently catalyze the cycloaddition of CO₂ to epoxides without needing the use of halide cocatalysts. The catalytic activity is strongly dependent upon the guest anions, and the iodide shows the highest activity. The results demonstrate the great potential of developing IMOFs with various functions related to the guest ions included in the porous matrices.

The Effect of Pore Sizes on D2/H2 Separation Conducted by MOF-74 Analogue

Four stable MOF-74 analogue Ni2(dobdc), Ni2(dobpdc), Ni2(olz) and Ni2(dotpdc) possess abundant open metal sites (OMSs) and honeycomb channels with pore sizes ranging from 1.0 to 2.6 nm, are used to...

Nanocage-based {In2Tm2}-organic framework for efficiently catalyzing the cycloaddition reaction of CO2 with epoxides and Knoevenagel condensation

The combination of [In2Tm2(μ2-OH)2(CO2)10(H2O)2] clusters and H5BDCP ligand generated a highly robust nanoporous MOF with high catalytic performance in the cycloaddition reaction of epoxides with CO2 and Knoevenagel condensation.

Modern Carbon-Based Materials for Adsorptive Removal of Organic and Inorganic Pollutants from Water and Wastewater

Currently, a serious threat for living organisms and human life in particular, is water contamination with persistent organic and inorganic pollutants. To date, several techniques have been adopted to remove/treat organics and toxic contaminants. Adsorption is one of the most effective and economical methods for this purpose. Generally, porous materials are considered as appropriate adsorbents for water purification. Conventional adsorbents such as activated carbons have a limited possibility of surface modification (texture and functionality), and their adsorption capacity is difficult to control. Therefore, despite the significant progress achieved in the development of the systems for water remediation, there is still a need for novel adsorptive materials with tunable functional characteristics. This review addresses the new trends in the development of new adsorbent materials. Herein, modern carbon-based materials, such as graphene, oxidized carbon, carbon nanotubes, biomass-derived carbonaceous matrices-biochars as well as their composites with metal-organic frameworks (MOFs) and MOF-derived highly-ordered carbons are considered as advanced adsorbents for removal of hazardous organics from drinking water, process water, and leachate. The review is focused on the preparation and modification of these next-generation carbon-based adsorbents and analysis of their adsorption performance including possible adsorption mechanisms. Simultaneously, some weak points of modern carbon-based adsorbents are analyzed as well as the routes to conquer them. For instance, for removal of large quantities of pollutants, the combination of adsorption and other methods, like sedimentation may be recommended. A number of efficient strategies for further enhancing the adsorption performance of the carbon-based adsorbents, in particular, integrating approaches and further rational functionalization, including composing these adsorbents (of two or even three types) can be recommended. The cost reduction and efficient regeneration must also be in the focus of future research endeavors. The targeted optimization of the discussed carbon-based adsorbents associated with detailed studies of the adsorption process, especially, for multicomponent adsorbate solution, will pave a bright avenue for efficient water remediation.

Abundant defects of zirconium-organic xerogels: High anhydrous proton conductivities over a wide temperature range and formic acid impedance sensing

There exists a challenge to develop solid-state proton conductors with high conductivity not only at high working temperatures (>353 K) but at start-up temperature and even at subzero temperature (<273 K) in cold climates or high-altitude drones. Here we present a series of zirconium-organic xerogels (Zr/Fum-xerogels) with porosity and defectivity, supported by N₂ sorption, thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS), exhibiting a high anhydrous proton conductivity over the temperature range of 233 to 433 K. The anhydrous conductivity of Zr/Fum-xerogel-0.04 reaches 5.68 × 10^-4 (233 K) and 2.5 × 10^-2 S cm^-1 (433 K), situating in the leading level of all anhydrous conductors reported to date. Further, the defective effects on acidities and conductive mechanisms of xerogels, especially structural changes of water clusters generated by varying temperatures are investigated by ion exchange capacity (IEC), X-ray photoelectron spectroscopy (XPS), temperature programmed desorption of NH₃ (NH₃-TPD) and in-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). The zirconium-organic xerogels with outstanding conducting performance is further implemented as impedance sensor towards formic acid.

Fabrication of Hierarchical Macroporous ZIF-8 Monoliths Using High Internal Phase Pickering Emulsion Templates

The shaping of metal-organic frameworks (MOFs), referring to the integration of small sub-millimeter MOF crystals into bulk samples of desired size and shape, is an important step in the practical use of this class of porous material in many applications. Herein, we demonstrate for the first time the fabrication of hierarchical 3D MOF monoliths in situ within an MOF particle-stabilized high internal phase emulsion (HIPE). In this approach, a subfamily MOF (ZIF-8) is selected as the sole Pickering emulsion stabilizer for an oil-in-water (O/W) HIPE. With 2-methylimidazole and zinc nitrate in the continuous phase, ZIF-8 is formed in the emulsion to "bond" the ZIF-8 particles fabricating a ZIF-8 monolith without the addition of a polymer or polymerization of monomers. Freeze-drying of the HIPE produces a 3D ZIF-8 monolith. The monolith is packed into a chromatography column to test its catalytic performance as a flow-through catalyst in the Knoevenagel reaction. The monolith catalyst exhibits very high catalytic efficiency. Almost all the reaction mixture transforms to product within 2 min. Besides, the 3D ZIF-8 monolith showed excellent performance as an oil absorbent in oil-water separation. It achieved an absorption equilibrium of oil in less than 5 s, much faster than traditional high oil absorption materials.

Metal Microfibers Delivered Eddy Current Heating for Efficient Synthesis and Regeneration of Metal-Organic Framework Monoliths

On the basis of stainless-steel fiber (SSF)-delivered localized Eddy current heating (LECH) in response to an alternating magnetic field, a novel LECH-driven framework synthesis (LIFS) strategy has been developed for highly efficient metal-organic framework (MOF) synthesis, resulting in the production of a set of SSF/MOF composites consisting of MOF-coated SSF (SSF@MOF) fibers and free MOF crystals. Detailed studies on the LIFS reaction kinetics indicate that the use of LIFS can greatly promote MOF production in comparison to the conventional solvothermal reactions. To facilitate the practical applications, the resulting powder SSF/UiO-66-NH₂ composites, as a typical example, are further processed into well-shaped SSF/UiO-66-NH₂ monoliths (SUS) with varied MOF loadings. In SUSs, the embedded SSFs exhibit well-controlled LECH capacities depending on the applied magnetic field strength. Driven by LECH, SUS monoliths can be uniformly heated and fully regenerated, demonstrating a LECH-triggered framework regeneration (LIFR) process for highly efficient regenerating MOF monoliths. As LECH is delivered by the low-cost commercial SSFs and remotely triggered by an external magnetic field, our currently developed LIFS and LIFR processes provide a novel, low-cost, and energy-efficient way to highly efficiently synthesize and regenerate MOF materials.

Volumetrics of Hydrogen Storage by Physical Adsorption

Physical adsorption remains a promising method for achieving fast, reversible hydrogen storage at both ambient and cryogenic conditions. Research in this area has recently shifted to focus primarily on the volumetric (H2 stored/delivered per volume) gains achieved within an adsorptive storage system over that of pure H2 compression; however, the methodology for estimating a volumetric stored or delivered amount requires several assumptions related to the ultimate packing of the adsorbent material into an actual storage system volume. In this work, we critically review the different assumptions commonly employed, and thereby categorize and compare the volumetric storage and delivery across numerous different porous materials including benchmark metal-organic frameworks, porous carbons, and zeolites. In several cases, there is a significant gain in both storage and delivery by the addition of an adsorbent to the high-pressure H2 storage system over that of pure compression, even at room temperature. Lightweight, low-density materials remain the optimal adsorbents at low temperature, while higher density, open metal-containing frameworks are necessary for high-density room temperature storage and delivery.

Composite Materials Manufactured by Photopolymer 3D Printing with Metal-Organic Frameworks

Abstract

New composite materials containing metal-organic framework (MOF-5) particles were manufactured by 3D printing. The optimal composition of the photopolymer formulation and printing conditions ensuring the highest quality of printing were selected. Retention of the metal-organic framework (MOF) structure in the resulting composite objects was demonstrated by powder X-ray diffraction. The distribution of MOF-5 particles over the whole bulk of the 3D product was studied by X-ray computed tomography. In the future, composite materials of this type containing catalytically active MOFs, with their structure and properties being controllable at the micro and macro levels, could find application as catalysts of various chemical processes.

Preparation of a magnetic metal-organic square and metal-organic cubes using 4,5-bis(2-imidazolinyl)imidazolate: slow magnetization relaxation behavior in mixed-valent octamanganese(ii/iii) clusters

Functional metal-organic squares (MOSs) and metal-organic cubes (MOCs) are important building units for zeolite-like metal-organic frameworks (ZMOFs), which are required to exhibit solid-state properties, such as dielectric, conductive, and magnetic properties. This work describes the preparation and magnetism of a tetracopper(ii) macrocyclic complex [Cu^II₄(im-H₂bizn)₄(DMSO)₃(THF)](ClO₄)₄·8DMSO (1) (Him-H₂bizn = 4,5-bis(4,5-dihydro-1H-imidazol-2-yl)imidazole) as a MOS and octametallic clusters [Ni^II₈(im-H₂bizn)₁₂](ClO₄)₄·10MeOH·3H₂O (2) and [Mn^II₄Mn^III₄(im-H₂bizn)₁₂](ClO₄)₈·14MeOH (3) as MOCs. The Cu^II ion in 1 possesses a five-coordinated square pyramidal geometry, resulting in the formation of an M₄L₄-type square, which gives an estimated intramolecular antiferromagnetic interaction with an exchange coupling constant of J_Cu-Cu = -95 K. Meanwhile, 2 and 3 present six-coordinated octahedral geometries, giving M₈L₁₂-type cubes, of which 2 is a normal paramagnetic compound with intramolecular antiferromagnetic interactions, and where J_Ni-Ni = -32 K. The most notable compound 3 is a Mn^II₄Mn^III₄ mixed valence state compound, which exhibits a slow magnetization relaxation behavior similar to that of single-molecule magnets. This is attributed to the contribution of magnetic anisotropy caused by the Jahn-Teller effect of the Mn^III ions. Utilizing a modified Arrhenius plot to extract the values of the thermal barrier for magnetization reversal (E_a/k_B) and the pre-exponential factor (τ₀), the parameters for the relaxation behavior were estimated to be E_a/k_B = 6.38 K and τ₀ = 3.87 × 10^-7 s. UV-vis spectroscopy and electrochemical measurements in solution were also carried out. Compound 3 will be expected to lead to a solid-state material in which the magnetic and dielectric properties of encapsulated small molecules cooperate with the slow magnetization relaxation properties of the MOC backbone.

Emergent electrochemical functions and future opportunities of hierarchically constructed metal-organic frameworks and covalent organic frameworks

Designing spatial and architectural features across from the molecular to bulk scale is one of the most important topics in materials science which has received a lot of attention in recent years. Looking back to the past research, findings on the influences of spatial features denoted as porous structures on the applications related to mass transport phenomena have been widely studied in traditional inorganic materials, such as ceramics over the past two decades. However, due to the difficulties in precise control of the porous structures at the molecular level in this class of materials, the mechanistic understanding of the effects of spatial and architectural features across from the molecular level to meso-/macroscopic scale is still lacking, especially in electrochemical reactions. Further understanding of fundamental electrochemical functions in well-defined architectures is indispensable for the further advancement of key next-generation energy devices. Furthermore, creating periodic porosity in reticular structures is starting to be recognized as an emerging approach to control the electronic structure of materials. In this review, we focus on the investigations on preparing well-defined molecular-level crystalline porous materials known as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) into hierarchically constructed architectures from molecular structures lower than the reticular frameworks to meso-/macroscopic scale structures. By connecting well-defined nanosized porous structures in MOFs/COFs and additional length-scale space or shapes, emergent electrochemical functions towards emerging devices, such as beyond Li-ion batteries including all-solid-state rechargeable batteries, are expected to be obtained. By summarizing recent advancements in synthetic strategies of hierarchically constructed MOF/COF based materials and fundamental investigation of their structural effect in a wide spectrum of electrochemical applications, we highlight the importance and future direction of this developing field of hierarchically constructed MOFs/COFs, while emphasizing the required chemical stability of the MOFs/COFs which meet the use in the game-changing electrochemical devices.

Solvent- and Temperature-Driven Photoluminescence Modulation in Porous Hofmann-Type SrII-ReV Metal-Organic Frameworks

A unique family of three-dimensional (3D) luminescent Sr^II-Re^V metal-organic frameworks (MOFs), {[Sr^II(MeOH)₅][Re^V(CN)₄(N)(bpen)_0.5]·MeOH}_n [1·MeOH; N^3- = nitrido ligand, bpen = 1,2-bis(4-pyridyl)ethane, and MeOH = methanol], {[Sr^II(MeOH)₄][Re^V(CN)₄(N)(bpee)_0.5]·2MeOH}_n [2·MeOH; bpee = 1,2-bis(4-pyridyl)ethylene], and {[Sr^II(bpy)_0.5(MeOH)₂][Re^V(CN)₄(N)(bpy)_0.5]}_n (3·MeOH; bpy = 4,4'-bipyridine), is reported. They are obtained by the molecular self-assembly of Sr²⁺ ions with tetracyanidonitridorhenate(V) metalloligands, [Re^V(CN)₄(N)]^2-, and pyridine-based organic spacers (L = bpen, bpee, bpy). Such a combination of molecular precursors results in bimetallic Sr^II-Re^V cyanido-bridged layers further bonded by organic ligands into pillared Hofmann-type coordination skeletons. Because of the formation of {Re^V-(L)-Re^V} moieties providing emissive metal-to-ligand charge-transfer states, 1·MeOH-3·MeOH exhibit solid-state room-temperature photoluminescence tunable from green to orange by the applied organic ligand. The most stable MOF of 3·MeOH, based on the alternating {Re^V-(bpy)-Re^V} and {Sr^II-(bpy)-Sr^II} linkages, exhibits three interconvertible, variously solvated phases, methanol-solvated 3·MeOH, hydrated {[Sr^II(bpy)_0.5(H₂O)₂][Re^V(CN)₄(N)(bpy)_0.5]·0.6H₂O}_n (3·H₂O), and desolvated {[Sr^II(bpy)_0.5][Re^V(CN)₄(N)(bpy)_0.5]}_n (3). Their formation was correlated with water and methanol vapor sorption properties investigated for 3·H₂O. The solvent content affects the luminescence mainly by tuning the emission energy within the series of 3·MeOH, 3·H₂O, and 3. All of the obtained compounds exhibit temperature-driven modulation of luminescence, including the shift of the emission maximum and lifetime. The thermochromic luminescent response was found to be sensitive to the presence and type of solvent in the crystal lattice. This work shows that the construction of [Re^V(CN)₄(N)]^2--based MOFs is an efficient route toward advanced solid luminophores tunable by external stimuli such as solvent or temperature.

In situ reconstruction of ZIF-8 loaded on fibrous supports

The fibre-supported ZIF-8 can undergo a full degradation–recrystallization cycle in a vapor phase with partial recovery of its porosity.

A binary all-nanoporous composite membrane constructed via vapor phase transformation for high-permeance gas separation

A COF with a large pore size was incorporated into a MOF matrix to construct an all-nanoporous composite membrane for high-permeance gas separation.

Electrochemical Aptasensors Based on Hybrid Metal-Organic Frameworks

Metal-organic frameworks (MOFs) offer a unique variety of properties and morphology of the structure that make it possible to extend the performance of existing and design new electrochemical biosensors. High porosity, variable size and morphology, compatibility with common components of electrochemical sensors, and easy combination with bioreceptors make MOFs very attractive for application in the assembly of electrochemical aptasensors. In this review, the progress in the synthesis and application of the MOFs in electrochemical aptasensors are considered with an emphasis on the role of the MOF materials in aptamer immobilization and signal generation. The literature information of the use of MOFs in electrochemical aptasensors is classified in accordance with the nature and role of MOFs and a signal mode. In conclusion, future trends in the application of MOFs in electrochemical aptasensors are briefly discussed.

Performance evaluation of CuBTC composites for room temperature oxygen storage

Oxygen is commonly separated from air using cryogenic liquefaction. The inherent energy penalties of phase change inspire the search for energy-efficient separation processes. Here, an alternative approach is presented, where we determine whether it is possible to utilise simpler, stable materials in the right process to achieve overall energy efficiency. Adsorption and release by Metal-Organic Frameworks (MOFs) are an attractive alternative due to their high adsorption and storage capacity at ambient conditions. Cu-BTC/MgFe2O4 composites were prepared, and magnetic induction swing adsorption (MISA) used to release adsorbed oxygen quickly and efficiently. The 3 wt% MgFe2O4 composites exhibited an oxygen uptake capacity of 0.34 mmol g-1 at 298 K and when exposed to a magnetic field of 31 mT, attained a temperature rise of 86 °C and released 100% of adsorbed oxygen. This water vapor stable pelletized system, can be filled and emptied within 10 minutes requiring around 5.6 MJ kg-1 of energy.

Synthesis and structure of iron–copper/hollow magnetic/metal–organic framework/coordination sites in a heterogeneous catalyst for a Fenton-based reaction

Preparation of novel hybrid catalysts with highly stable properties was conducted for wastewater remediation.