Uranium speciation in weathered granitic waste rock piles: an XAFS investigation

Assessment of 226Ra and U colloidal transport in a mining environment

The colloidal transport of trace (Fe, Al, Ba, Pb, Sr, U) and ultra-trace (226Ra) elements was studied in a mining environment. An original approach combining 0.45 μm filtered water sampling, the Diffusive Gradient in Thin films (DGT) technique, mineralogical characterization, and geochemical modelling was developed and tested at 17 sampling points. DGT was used for the truly dissolved fraction of the elements of interest, while the 0.45 μm filtration includes both colloidal and truly dissolved fractions (together referred to as total dissolved fraction). Results indicated a colloidal fraction for Al (up to 50%), Ba (up to 86%), and Fe (up to 99%) explained by the presence of submicrometric grains of kaolinite, barite, and ferrihydrite, respectively. Furthermore, the total dissolved 226Ra concentration in the water samples reached up to 10-25 Bq/L (1.2-3.0 10-12 mol/L) at 3 sampling points, while the truly dissolved aqueous 226Ra concentrations were in the mBq/L range. Such high total dissolved concentrations are explained by retention on colloidal barite, accounting for 95% of the total dissolved 226Ra concentration. The distribution of 226Ra between the truly dissolved and colloidal fractions was accurately reproduced using a (Rax,Ba1-x)SO4 solid solution, with values of the Guggenheim parameter a0 close to ideality. 226Ra sorption on ferrihydrite and kaolinite, other minerals well known for their retention properties, could not explain the measured colloidal fractions despite their predominance. This illustrates the key role of barite in such environments. The measured concentrations of total dissolved U were very low at all the sampling points (<4.5 10-10 mol/L) and the colloidal fraction of U accounted for less than 65%. U sorption on ferrihydrite could account for the colloidal fraction. This original approach can be applied to other trace and ultra-trace elements to complement when necessary classical environmental surveys usually performed by filtration on 0.45 μm.

Time-resolved laser-induced fluorescence spectroscopy and chemometrics for fast identification of U(VI)-bearing minerals in a mining context

We evaluated the potential of time-resolved laser-induced fluorescence spectroscopy (TRLFS) combined with chemometric methods for fast identification of U(VI)-bearing minerals in a mining context. We analyzed a sample set which was representative of several environmental conditions. The set consisted of 80 uranium-bearing samples related to mining operations, including natural minerals, minerals with uranium sorbed on the surface, and synthetic phases prepared and characterized specifically for this study. The TRLF spectra were processed using the Ward algorithm and the K-nearest neighbors (KNN) method to reveal similarities between samples and to rapidly identify the uranium-bearing phase and the associated mineralogical family. The predictive models were validated on an independent dataset, and then applied to test samples mostly taken from U mill tailings. Identification results were found to be in accordance with the available characterization data from X-ray diffraction (XRD) and scanning electron microscopy-energy dispersive X-ray spectrometry (SEM-EDX). This work shows that TRLFS can be an effective decision-making tool for environmental investigations or geological prospection, considering the large diversity of uranium-bearing mineral phases and their low concentration in environmental samples.

Uranium speciation control by uranyl sulfate and phosphate in tailings subject to a Sahelian climate, Cominak, Niger

Long-term uranium mobility in tailings is an environmental management issue. The present study focuses on two U-enriched layers, surficial and buried 14.5 m, of the tailings pile of Cominak, Niger. The acidic and oxidizing conditions of the tailings pile combined with evapotranspiration cycles related to the Sahelian climate control U speciation. Uraninite, brannerite, and moluranite as well as uranophane are relict U phases. EXAFS spectroscopy, HR-XRD, and SEM/WDS highlight the major role of uranyl sulfate groups in uranium speciation. Uranyl phosphate neoformation in the buried layer (paleolayer) acts as an efficient trap for uranium.

Partitioning of uranium in contaminated bottom sediments: The meaning of fractionation

Sequential extraction tests were used to study partitioning of U in the bottom sediments of two reservoirs that have been used for the temporary storage of nuclear waste at the "Mining and Chemical Combine" (Zheleznogorsk, Krasnoyarsk region, Russia). Various sequential extraction protocols were applied to the bottom sediment samples and the results compared with those obtained for laboratory-prepared simulated samples with different speciation and partitioning, e.g., U(VI) sorbed onto various inorganic minerals and organic matter, as well as uranium oxides. The distributions of uranium in fractions extracted from simulated and actual contaminated samples were compared to shed light on the speciation of U in the bottom sediments. X-ray absorption spectroscopy, X-ray diffraction, and scanning electron microscopy were also used to analyze the partitioning of U in contaminated sediments. We also compared the results obtained using the spectroscopic and microscopic techniques, as well as sequential extraction.

Uranium retention on iron oxyhydroxides in post-mining environmental conditions

Investigating uranium migration mechanisms related to the weathering of waste rocks is essential for developing strategies that can address the potential environmental issues caused by uranium mining. This work is based on environmental samples containing 2 L ferrihydrite, lepidocrocite and goethite collected in the technosols from granitic waste rock piles, mine drainage conduits and mine waters. The results show the important role of iron oxyhydroxide in U immobilization and re-concentration. EXAFS spectroscopy combined with mineralogical and geochemical studies (Scanning electronic microscopy, Wavelength-dispersive X-ray spectroscopy microprobe, inductively coupled plasma - optical emission spectrometry/mass spectrometry and X-ray diffraction) allowed for the identification of uranyl ternary surface complexes at the ferrihydrite surface that were either composed of phosphate groups or organic matter. Moreover, goethite and lepidocrocite were also identified as a secondary trap for U immobilization. U(VI) is known to be mobile in oxidizing conditions. This study highlights the control of the uranyl mobility by various iron oxyhydroxides in supergene conditions.

Geochemical Controls on Uranium Release from Neutral-pH Rock Drainage Produced by Weathering of Granite, Gneiss, and Schist

We investigated geochemical processes controlling uranium release in neutral-pH (pH ≥ 6) rock drainage (NRD) at a prospective gold deposit hosted in granite, schist, and gneiss. Although uranium is not an economic target at this deposit, it is present in the host rock at a median abundance of 3.7 µg/g, i.e., above the average uranium content of the Earth’s crust. Field bin and column waste-rock weathering experiments using gneiss and schist mine waste rock produced circumneutral-pH (7.6 to 8.4) and high-alkalinity (41 to 499 mg/L as CaCO3) drainage, while granite produced drainage with lower pH (pH 4.7 to >8) and lower alkalinity (<10 to 210 mg/L as CaCO3). In all instances, U release was associated with calcium release and formation of weakly sorbing calcium-carbonato-uranyl aqueous complexes. This process accounted for the higher release of uranium from carbonate-bearing gneiss and schist than from granite despite the latter’s higher solid-phase uranium content. In addition, unweathered carbonate-bearing rocks having a higher sulfide-mineral content released more uranium than their oxidized counterparts because sulfuric acid produced during sulfide-mineral oxidation promoted dissolution of carbonate minerals, release of calcium, and formation of calcium-carbonato-uranyl aqueous complexes. Substantial uranium attenuation occurred during a sequencing experiment involving application of uranium-rich gneiss drainage into columns containing Fe-oxide rich schist. Geochemical modeling indicated that uranium attenuation in the sequencing experiment could be explained through surface complexation and that this process is highly sensitive to dissolved calcium concentrations and pCO2 under NRD conditions.

Speciation of Uranium and Plutonium From Nuclear Legacy Sites to the Environment: A Mini Review

The row of 15 chemical elements from Ac to Lr with atomic numbers from 89 to 103 are known as the actinides, which are all radioactive. Among them, uranium and plutonium are the most important as they are used in the nuclear fuel cycle and nuclear weapon production. Since the beginning of national nuclear programs and nuclear tests, many radioactively contaminated nuclear legacy sites, have been formed. This mini review covers the latest experimental, modeling, and case studies of plutonium and uranium migration in the environment, including the speciation of these elements and the chemical reactions that control their migration pathways.

A multi-scalar study of the long-term reactivity of uranium mill tailings from Bellezane site (France)

The mill tailings from uranium mines constitute very low-level, long-lived, radioactive process waste. Their long-term management therefore requires a good understanding of the geochemical mechanisms regulating the mobility of residual uranium and radium-226. This article presents the results of the detailed characterization of the tailings resulting from the dynamic leaching processes used on the ore of the La Crouzille mining division and stored at the Bellezane site (Haute-Vienne, France) for over 25 years. A multi-scalar and multidisciplinary approach was developed based on a study of the site's history, on the chemical, radiological and mineralogical characterizations of the solid fraction of the tailings, and on porewater analyses. These were complemented by thermodynamic equilibrium models to predict the long-term mobility of U and ²²⁶Ra. Weakly acidic (pH = 6.35) and oxidizing (Eh = 138 mV/SHE) porewaters had a sulfated-magnesian facies ([SO₄]_tot = 43 mmol/L; [Mg]_tot = 33 mmol/L) with an accessory calcium bicarbonate component (TIC = 25 mmol/L; [Ca]_tot = 13 mmol/L) and dissolved concentrations of uranium and ²²⁶Ra of 12 × 10^-6 mol/L and 0.58 Bq/L respectively. Ultra-filtration at 10 kDa indicated the absence of colloidal phases. The characterization of the tailings confirmed their homogeneity from a radiological, chemical and mineralogical point of view. The residual U and ²²⁶Ra concentrations measured in the solid were 160 ppm and 25 Bq/g respectively, in accordance with the initial ore grades and mill yields, or more than 99% of the total stock. In terms of chemical and mineralogical composition, the tailings were mainly composed of minerals from the granitic ore (quartz, potassium feldspar, plagioclases and micas) in association with their weathering products (smectite and ferric oxyhydroxides) and with neo-formed minerals following rapid diagenesis after neutralization of the tailings before their emplacement (gypsum and barite). All these minerals are effective traps for the retention of U and ²²⁶Ra. The uranium is distributed partly in micrometer scale uraninite and coffinite refractory phases embedded in grains of quartz, and partly sorbed to smectite and ferric oxyhydroxides. The ²²⁶Ra on the other hand is trapped mainly within the barite. The aqueous concentrations of U and ²²⁶Ra could be described using a thermodynamic approach so that their long-term mobility can subsequently be assessed by modeling. The paragenesis of the tailings could be seen to be stable over time with the exception of neo-formed gypsum and calcite, which will gradually dissolve. The presence of retention traps offering surplus capacity, i.e. smectite, ferric oxyhydroxides and barite, will maintain the U and the ²²⁶Ra at very low aqueous concentrations, even under oxidizing conditions. Moreover, the low permeability of the mill tailings leads, in the case of ²²⁶Ra, to behavior dictated only by the radioactive decay.

Dissolved Carbonate and pH Control the Dissolution of Uranyl Phosphate Minerals in Flow-Through Porous Media

Uranyl phosphate minerals represent an important secondary source of uranium release at contaminated sites. In flow-through column experiments with background porewater (BPW) of typical freshwater aquifer composition (pH 7.0, ∼0.2 mM total carbonate (TC)), dissolution of K-ankoleite (KUO₂PO₄·3H₂O), Na-autunite (NaUO₂PO₄·3H₂O), and Ca-autunite (Ca(UO₂)₂(PO₄)₂·6H₂O) was controlled by mineral solubility at steady-state U release. Effluent concentrations indicated exchange with BPW cations, and postreaction characterization showed alteration of the initial mineral composition, changes in structure (decreased crystallinity, increased disorder, and distortion of U-P mineral sheets) and possible neoformation of phases of similar structure. Increasing the BPW pH and TC to 8.1-8.2 and 2.2-3.7 mM, respectively, resulted in mineral undersaturation and produced ca. 2 orders-of-magnitude higher U and P release without reaching steady state. Minerals incorporated less BPW cations into their structures compared to low carbonate BPW experiments but showed structural disorder and distortion. Faster dissolution rates were attributed to the formation of binary and ternary uranyl carbonate complexes that accelerate the rate-determining step of uranyl detachment from the uranyl-phosphate layered structure. Calculated dissolution rates (log R_s between -8.95 and -10.32 mol m^-2 s^-1), accounting for reaction and transport in porous media, were similar to dissolution rates of other classes of uranyl minerals. In undersaturated solutions, dissolution rates for uranyl phosphate, oxyhydroxide, and silicate minerals can be predicted within 1-2 orders-of-magnitude from pH ∼5-10 on the basis of pH/carbonate concentration.

A multi-technique study of altered granitic rock from the Krunkelbach Valley uranium deposit, Southern Germany

Herein, a multi-technique study was performed to reveal the elemental speciation and microphase composition in altered granitic rock collected from the Krunkelbach Valley uranium (U) deposit area near an abandoned U mine, Black Forest, Southern Germany. The former Krunkelbach U mine with 1–2 km surrounding area represents a unique natural analogue site with the rich accumulation of secondary U minerals suitable for radionuclide migration studies from a spent nuclear fuel (SNF) repository. Based on a micro-technique analysis using several synchrotron-based techniques such as X-ray fluorescence analysis, X-ray absorption spectroscopy, powder X-ray diffraction and laboratory-based scanning electron microscopy and Raman spectroscopy, the complex mineral assemblage was identified. While on the surface of granite, heavily altered metazeunerite–metatorbernite (Cu(UO₂)₂(AsO₄)_2−x(PO₄)_x·8H₂O) microcrystals were found together with diluted coatings similar to cuprosklodowskite (Cu(UO₂)₂(SiO₃OH)₂·6H₂O), in the cavities of the rock predominantly well-preserved microcrystals close to metatorbernite (Cu(UO₂)₂(PO₄)₂·8H₂O) were identified. The Cu(UO₂)₂(AsO₄)_2−x(PO₄)_x·8H₂O species exhibit uneven morphology and varies in its elemental composition, depending on the microcrystal part ranging from well-preserved to heavily altered on a scale of ∼200 μm. The microcrystal phase alteration could be presumably attributed to the microcrystal morphology, variations in chemical composition, and geochemical conditions at the site. The occurrence of uranyl-arsenate-phosphate and uranyl-silicate mineralisation on the surface of the same rock indicates the signatures of different geochemical conditions that took place after the oxidative weathering of the primary U- and arsenic (As)-bearing ores. The relevance of uranyl minerals to SNF storage and the potential role of uranyl-arsenate mineral species in the mobilization of U and As into the environment is discussed.

A multi-technique elemental and microphase analysis of altered granitic rock from the Krunkelbach Valley uranium deposit, Black Forest, Southern Germany.