Hydrothermal synthesis and microwave-assisted activation of starch-derived carbons as an effective adsorbent for naphthalene removal

Microwave Synthesis of Carbon Quantum Dots from Arabica Coffee Ground for Fluorescence Detection of Fe3+, Pb2+, and Cr3

In this study, carbon quantum dots (CQDs), which were synthesized from arabica coffee ground-derived activated carbon, have been successfully employed as a fluorescence sensor to detect Fe3+ ions. CQDs were fabricated using microwave heating for 5-10 min, which emitted vibrant blue light at 455 nm when exposed to excitation at 365 nm. Dynamic light scattering (DLS) analysis revealed that the average size of CQDs was 10.12 nm with a quantum yield of 6.01%. Fluorescence detection was developed for sensing Fe3+, Pb2+, and Cr3+ ions. The addition of the three metal ions resulted in a decrease in the fluorescence (FL) intensity of the CQDs, with the addition of Fe3+ ions demonstrating a more significant decrease in FL compared to the addition of both Cr3+ and Pb2+ ions. The results indicated that the CQDs synthesized from activated carbon of arabica coffee waste performed as a selective fluorescent detector for Fe3+ ions, with a detection limit of 0.27 μM.

Sonocatalytic degrading antibiotics over activated carbon in cow milk

Herein, an efficient, simple and economical approach to remove antibiotics (ABX), i.e. ceftiofur hydrochloride, sulfamonomethoxine sodium (SMM), marbofloxacin and oxytetracycline by sonication with activated carbon (AC) from cow milk has been successfully implemented. The pseudo-first-order kinetics constants for the sonolytic and sonocatalytic degrading SMM are 0.036 and 0.093 min-1, respectively. The synergistic efficiency of removing ABX by using sonocatalysis reached 1.8-4.0. Hydrophobic ABX underwent faster degradation than hydrophilic ABX in sonocatalytic systems. Adding 0.5 mmol L-1 H2O2, the optimal concentration, improved the sonocatalytic degradation rates of ABX by 9.1%-28.5%. Surface area and dose of AC play crucial roles in the sonocatalysis of ABX. By sonicating 50 mL of 5.52 μmol L-1 ABX in milk at 500 kHz and 259 W with 20 mg AC for 20-60 min resulted in residual ABX concentrations ranging from 42.6 to 95.1 μg L-1, which meet the relative maximum residue limits set by European Commission.

Alkaline etched hydrochar-based magnetic adsorbents produced from pharmaceutical industry waste for organic dye removal

A large amount of pharmaceutical industry waste (PIW) was inevitably produced every year, and the PIW can be degraded by high temperature reaction to form porous structures. The study proposed an innovative pathway to valorize PIW with hydrothermal carbonization (HTC) coupled with alkali etching (AE). Without adding any additives, magnetic hydrochar could be generated with rough surface topography and suitable specific surface area (S_BET) by this method. Effects of HTC conditions and alkaline solution concentrations on the physicochemical and adsorption properties of PIW were investigated, and adsorption mechanism was explored. Based on evaluations of the magnetism, cyclic regeneration, and heavy metal leaching properties of the products, the feasibility of preparing magnetic adsorbents with solid waste by HTC coupled AE was established. The alkaline etching pharmaceutical industry waste (AEPIW) hydrochar showed the highest S_BET (54.64 m²/g) after the PIW was treated by 260 °C for 2 h plus 1 mol/L KOH. The removal rate of methylene blue (MB) could exceed 90% and the saturated magnetization was ~8 emu/g. The proposed new method was able to convert the low-value solid industrial waste into high-performance hydrochar-based magnetic adsorbents, which was tested to have a capability to efficiently and sustainably remove organic pollutants from water.

Enhanced removal of P(V), Mo(VI) and W(VI) generated oxyanions using Fe-MOF as adsorbent from hydrometallurgical waste liquid: Exploring the influence of ionic polymerization

Environmentally hazardous P(V), Mo(VI) and W(VI) generated oxyanions exist widely in the waste liquid of nonferrous hydrometallurgy. In this work, Fe-MOF material was simply prepared via solvothermal synthesis and then used as an adsorbent to remove P(V), Mo(VI) and W(VI) oxyanions from hydrometallurgical waste liquid. Several important parameters, including solution pH, oxyanion concentration, contact time, adsorbent amount, temperature and coexistent heavy metal ions, were systematically investigated. The results demonstrate that adsorption process was almost pH-independent over a broad range of pH 3.0-10.0. The adsorption efficiency was strongly associated with the chemical species of oxyanions. The higher polymerisation degree of oxyanions was more favourable for removal efficiency. Additionally, the maximum removal efficiencies for P(V), Mo(VI) and W(VI) oxyanions under optimum conditions were approximately 100%. Furthermore, the adsorption kinetics and isotherms of oxyanions on the adsorbent separately belonged to the pseudo-second-order and Langmuir isotherm models. XPS analysis revealed that inner-sphere complexation played a dominant role in the adsorption removal process. Fe-MOFs with pH-independent properties, abundant binding sites and high stability are prospective adsorbents for treating waste liquids in the hydrometallurgical industry.

In Situ Modification of Activated Carbons by Oleic Acid under Microwave Heating to Improve Adsorptive Removal of Naphthalene in Aqueous Solutions

This study aimed to improve the adsorption capacity of activated carbon (AC) towards naphthalene (NAP) in aqueous solutions. Starch-based AC (SAC) and pulverized coal-based AC (PCAC) were prepared in a one-pot procedure by activation with oleic acid and KOH under microwave heating. Brunauer–Emmett–Teller (BET) specific surface areas reached 725.0 and 912.9 m2/g for in situ modified SAC (O-SAC1) and PCAC (O-PCAC1), respectively. π–π bond, H-bond, and hydrophobic effects were directly involved in the NAP adsorption process. Batch adsorption data were well fitted by pseudo-second order kinetics and the Freundlich isotherm model. As compared to ACs prepared with only KOH activation, NAP adsorption capacities of PCAC and SAC prepared by the one-pot method increased by 16.9% and 13.7%, respectively. Influences of varying factors were investigated in column adsorption of NAP using O-SAC1 and O-PCAC1. Based on breakthrough curves analysis, the larger column height (H), lower flow rate (Q0), and lower initial concentration (C0) resulted in the longer breakthrough and exhaustion times in both cases. Specifically, we concluded that O-PCAC1 exhibits better adsorption capacity than O-SAC1 in the given conditions. The optimized operating parameters were 1 cm (H), 1 mL/min (Q0) and 30 mg/L (C0). Finally, column adsorption data could be well fitted by the Thomas model.

Competitive adsorption of naphthalene and phenanthrene on walnut shell based activated carbon and the verification via theoretical calculation

Walnut shell based activated carbon (WAC) was prepared via microwave-assisted KOH activation.