Systematic study of TiO2/ZnO mixed metal oxides for CO2 photoreduction

Effect of the Synthetic Parameters over ZnO in the CO2 Photoreduction

Zinc oxide (ZnO) is an attractive semiconductor material for photocatalytic applications, owing to its opto-electronic properties. Its performances are, however, strongly affected by the surface and opto-electronic properties (i.e., surface composition, facets and defects), in turn related to the synthesis conditions. The knowledge on how these properties can be tuned and how they are reflected on the photocatalytic performances (activity and stability) is thus essential to achieve an active and stable material. In this work, we studied how the annealing temperature (400 °C vs. 600 °C) and the addition of a promoter (titanium dioxide, TiO₂) can affect the physico-chemical properties of ZnO materials, in particular surface and opto-electronic ones, prepared through a wet-chemistry method. Then, we explored the application of ZnO as a photocatalyst in CO₂ photoreduction, an appealing light-to-fuel conversion process, with the aim to understand how the above-mentioned properties can affect the photocatalytic activity and selectivity. We eventually assessed the capability of ZnO to act as both photocatalyst and CO₂ adsorber, thus allowing the exploitation of diluted CO₂ sources as a carbon source.

Highly selective CO2 photoreduction to CO on MOF-derived TiO2

Metal-Organic Framework (MOF)-derived TiO2, synthesised through the calcination of MIL-125-NH2, is investigated for its potential as a CO2 photoreduction catalyst. The effect of the reaction parameters: irradiance, temperature and partial pressure of water was investigated. Using a two-level design of experiments, we were able to evaluate the influence of each parameter and their potential interactions on the reaction products, specifically the production of CO and CH4. It was found that, for the explored range, the only statistically significant parameter is temperature, with an increase in temperature being correlated to enhanced production of both CO and CH4. Over the range of experimental settings explored, the MOF-derived TiO2 displays high selectivity towards CO (98%), with only a small amount of CH4 (2%) being produced. This is notable when compared to other state-of-the-art TiO2 based CO2 photoreduction catalysts, which often showcase lower selectivity. The MOF-derived TiO2 was found to have a peak production rate of 8.9 × 10-4 μmol cm-2 h-1 (2.6 μmol g-1 h-1) and 2.6 × 10-5 μmol cm-2 h-1 (0.10 μmol g-1 h-1) for CO and CH4, respectively. A comparison is made to commercial TiO2, P25 (Degussa), which was shown to have a similar activity towards CO production, 3.4 × 10-3 μmol cm-2 h-1 (5.9 μmol g-1 h-1), but a lower selectivity preference for CO (3 : 1 CH4 : CO) than the MOF-derived TiO2 material developed here. This paper showcases the potential for MIL-125-NH2 derived TiO2 to be further developed as a highly selective CO2 photoreduction catalyst for CO production.

Recent Advances of Photocatalytic Hydrogenation of CO2 to Methanol

Constantly increasing hydrocarbon fuel combustion along with high levels of carbon dioxide emissions has given rise to a global energy crisis and environmental alterations. Photocatalysis is an effective technique for addressing this energy and environmental crisis. Clean and renewable solar energy is a very favourable path for photocatalytic CO2 reduction to value-added products to tackle problems of energy and the environment. The synthesis of various products such as CH4, CH3OH, CO, EtOH, etc., has been expanded through the photocatalytic reduction of CO2. Among these products, methanol is one of the most important and highly versatile chemicals widely used in industry and in day-to-day life. This review emphasizes the recent progress of photocatalytic CO2 hydrogenation to CH3OH. In particular, Metal organic frameworks (MOFs), mixed-metal oxide, carbon, TiO2 and plasmonic-based nanomaterials are discussed for the photocatalytic reduction of CO2 to methanol. Finally, a summary and perspectives on this emerging field are provided.

Hierarchical hyper-branched titania nanorods with tuneable selectivity for CO2 photoreduction

Utilising captured CO₂ and converting it into solar fuels can be extremely beneficial in reducing the constantly rising CO₂ concentration in the atmosphere while simultaneously addressing energy crisis issues. Hence, many researchers have focused their work on the CO₂ photoreduction reaction for the last 4 decades. Herein, the titania hyper-branched nanorod (HBN) thin films, with a novel hierarchical dendritic morphology, revealed enhanced CO₂ photoreduction performance. The HBNs exhibited enhanced photogenerated charge production (66%), in comparison with P25 (39%), due to the unique hyper-branched morphology. Furthermore, the proposed HBN thin films exhibited a high degree of control over the product selectivity, by undergoing a facile phase-altering treatment. The selectivity was shifted from 91% towards CO, to 67% towards CH₄. Additionally, the HBN samples showed the potential to surpass the conversion rates of the benchmark P25 TiO₂ in both CO and CH₄ production. To further enhance the selectivity and overall performance of the HBNs, RuO₂ was incorporated into the synthesis, which enhanced the CH₄ selectivity from 67% to 74%; whereas the incorporation of CuO revealed a selectivity profile comparative to P25.

The use of hierarchical 1–3D Hyper-Branched Nanorods (HBNs) is examined as a photocatalyst for CO₂ photoreduction, utilising a facile protonation treatment able to tune the selectivity of CO₂ photoreduction products between (91%) CO to (67%) CH₄.

Metal halide perovskites as an emergent catalyst for CO2 photoreduction: a minireview

The present minireview summarizes recent advances in the application of metal halide perovskite for CO₂ photoreduction.

Facile one-pot synthesis of heterostructure SnO2/ZnO photocatalyst for enhanced photocatalytic degradation of organic dye

In this work, heterostructure SnO₂/ZnO nanocomposite photocatalyst was prepared by a straightforward one step polyol method.