Hybrid cellulose nanocrystal/alginate/gelatin scaffold with improved mechanical properties and guided wound healing

Scaffold-Mediated Drug Delivery for Enhanced Wound Healing: A Review

Wound healing is a complex physiological process involving coordinated cellular and molecular events aimed at restoring tissue integrity. Acute wounds typically progress through the sequential phases of hemostasis, inflammation, proliferation, and remodeling, while chronic wounds, such as venous leg ulcers and diabetic foot ulcers, often exhibit prolonged inflammation and impaired healing. Traditional wound dressings, while widely used, have limitations such poor moisture retention and biocompatibility. To address these challenges and improve patient outcomes, scaffold-mediated delivery systems have emerged as innovative approaches. They offer advantages in creating a conducive environment for wound healing by facilitating controlled and localized drug delivery. The manuscript explores scaffold-mediated delivery systems for wound healing applications, detailing the use of natural and synthetic polymers in scaffold fabrication. Additionally, various fabrication techniques are discussed for their potential in creating scaffolds with controlled drug release kinetics. Through a synthesis of experimental findings and current literature, this manuscript elucidates the promising potential of scaffold-mediated drug delivery in improving therapeutic outcomes and advancing wound care practices.

Efficacy of borneol-gypsum in skin regeneration and pain control in toxic epidermal necrolysis: A case report

BACKGROUND

Toxic epidermal necrolysis (TEN) is a life-threatening dermatological emergency mainly induced by drug hypersensitivity reactions. Standard management includes discontinuation of culprit drug and application of immunomodulatory therapy. However, mortality remains high due to complications like septic shock and multiorgan failures. Innovative approaches for skin care are crucial. This report introduces borneol-gypsum, a traditional Chinese drug but a novel dressing serving as an adjuvant of TEN therapy, might significantly improve skin conditions and patient outcomes in TEN.

CASE SUMMARY

A 38-year-old woman diagnosed with eosinophilic granulomatosis with polyangiitis experienced gangrenous complications and motor nerve involvement. After initial treatment of high-dose corticosteroids and cyclophosphamide, symptom of foot drop improved, absolute eosinophil counts decreased, while limb pain sustained. Duloxetine was added to alleviate her symptom. Subsequently, TEN developed. Additional topical application of borneol-gypsum dressing not only protected the skin lesions from infection but also significantly eased localized pain. This approach demonstrated its merit in TEN management by promoting skin healing and potentially reducing infection risks.

CONCLUSION

Borneol-gypsum dressing is a promising adjuvant that could significantly improve TEN management, skin regeneration, and patient comfort.

Cellulose-alginate hydrogels and their nanocomposites for water remediation and biomedical applications

In the last decade, both cellulose and alginate polysaccharides have been extensively utilized for the synthesis of biocompatible hydrogels because of their alluring characteristics like low cost, biodegradability, hydrophilicity, biodegradability, ease of availability and non-toxicity. The presence of abundant hydrophilic functional groups (like carboxyl and hydroxyl) on the surface of cellulose and alginate or their derivatives makes these materials promising candidates for the preparation of hydrogels with appealing structures and characteristics, leading to growing research in water treatment and biomedical fields. These two polysaccharides are typically blended together to improve hydrogels' desired qualities (mechanical strength, adsorption properties, cellulose/alginate yield). So, keeping in view their extensive applicability, in the present review article, recent advances in the development of cellulose/nanocellulose-alginate-based hydrogels and their relevance in water treatment (adsorption of dyes, heavy metals, etc.) and biomedical field (wound healing, tissue engineering, drug delivery) has been reviewed. Further, impact of other inorganic/organic additives in cellulose/nanocellulose-alginate-based hydrogels properties like contaminants adsorption, drug delivery, tissue engineering, etc., has also been studied. Moreover, the current difficulties and future prospects of nanocellulose-alginate-based hydrogels regarding their water purification and biomedical applications are also discussed at the end.

The efficient role of sodium alginate-based biodegradable dressings for skin wound healing application: a systematic review

Injuries and damage to the skin can be caused by different reasons throughout human life. The use of sodium alginate in tissue dressing has been highly studied due to its intrinsic properties, including its degradation rate and biocompatibility, and the capacity of supporting tissue proliferation. The aim of this paper is to demonstrate evidences, through a systematic review method, to support the application of sodium alginate as a curative and as a potential accelerator in the healing of skin wounds. Four databases were used to develop this systematic review: Science Direct, PubMed, Scielo and Scopus. The time interval established for the search was from January 2016 to October 2023. After applying the exclusion and inclusion criteria, each selected article was evaluated and it was observed that the improvement of the mechanical properties of sodium alginate when correctly processed and crosslinked were evident. However, the increase of crosslinking affects as the wettability and the swelling of the biomaterials can cause limitations in mechanical properties and hidrophilic behavior. To achieve the ideal dressing, it is necessary to apply the optimal concentration of crosslinking and other substances, which can damage its hidrophilic characteristic. Thus, it was concluded that sodium alginate has every caracteristic desirable to develop an effective and safe dressing.

Urethral Microenvironment Adapted Sodium Alginate/Gelatin/Reduced Graphene Oxide Biomimetic Patch Improves Scarless Urethral Regeneration

The nasty urine microenvironment (UME) is an inherent obstacle that hinders urethral repair due to fibrosis and swelling of the oftentimes adopted hydrogel-based biomaterials. Here, using reduced graphene oxide (rGO) along with double-freeze-drying to strengthen a 3D-printed patch is reported to realize scarless urethral repair. The sodium alginate/gelatin/reduced graphene oxide (SA/Gel/rGO) biomaterial features tunable stiffness, degradation profile, and anti-fibrosis performance. Interestingly, the 3D-printed alginate-containing composite scaffold is able to respond to Ca2+ present in the urine, leading to enhanced structural stability and strength as well as inhibiting swelling. The investigations present that the swelling behaviors, mechanical properties, and anti-fibrosis efficacy of the SA/Gel/rGO patch can be modulated by varying the concentration of rGO. In particular, rGO in optimal concentration shows excellent cell viability, migration, and proliferation. In-depth mechanistic studies reveal that the activation of cell proliferation and angiogenesis-related proteins, along with inhibition of fibrosis-related gene expressions, play an important role in scarless repair by the 3D-printed SA/Gel/rGO patch via promoting urothelium growth, accelerating angiogenesis, and minimizing fibrosis in vivo. The proposed strategy has the potential of resolving the dilemma of necessary biomaterial stiffness and unwanted fibrosis in urethral repair.

Alginate-Gelatin Hydrogel Scaffolds; An Optimization of Post-Printing Treatment for Enhanced Degradation and Swelling Behavior

The generation of 3D structures comprises three interlinked phases: material development, the printing process, and post-printing treatment. Numerous factors control all three phases, making the optimization of the entire process a challenging task. Until now, the state of the art has mainly focused on optimizing material processability and calibration of the printing process. However, after the successful Direct Ink Writing (DIW) of a hydrogel scaffold, the post-printing stage holds equal importance, as this allows for the treatment of the structure to ensure the preservation of its structural integrity for a duration that is sufficient to enable successful cell attachment and proliferation before undergoing degradation. Despite this stage's pivotal role, there is a lack of extensive literature covering its optimization. By studying the crosslinking factors and leveling the post-treatment settings of alginate-gelatin hydrogel, this study proposes a method to enhance scaffolds' degradation without compromising the targeted swelling behavior. It introduces an experimental design implementing the Response Surface Methodology (RSM) Design of Experiments (DoE), which elucidated the key parameters influencing scaffold degradation and swelling, and established an alginate ratio of 8% and being immersed for 15 min in 0.248 M CaCl2 as the optimal level configuration that generates a solution of 0.964 desirability, reaching a degradation time of 19.654 days and the swelling ratio of 50.00%.

Properties and antimicrobial activity of wheat-straw nanocellulose-arabinoxylan acetate composite films incorporated with silver nanoparticles

In the current study, the novel eco-friendly and biodegradable nanocomposite films (NC-AXAc) were prepared from wheat-straw NC and AXAc with improved functional properties. NC derived from wheat-straw cellulose has a fibre-like structure with mean-particle size in the 340-520 nm range. AX derived AXAc was prepared with Degree of Substitution (DS) in the range of 1.85-1.89. Furthermore, to enhance antimicrobial properties, AgNPs were prepared via the reduction method using NaBH4 and added into the concentration of 4 × 10-4M into the emulsion forming composite films. The silver nanoparticles (AgNPs) incorporated in the composite exhibited an average size of 40-70 nm and a surface plasmon resonance (SPR) absorption peak at 395 nm. The high-resolution XPS spectrum of the Ag element showed that the two peaks at around 374.2 eV (Ag3d3/2) and 368.2 eV (Ag3d5/2) clearly revealed the metallic Ag existence in composite films. SEM analysis revealed the coarse and heterogeneous morphology of AgNPs incorporated films. The AgNPs incorporated composites exhibited good mechanical, thermal stability, and antimicrobial activity. The results suggested that AgNPs incorporated NC-AXAc composites could be used as a potential biodegradable antimicrobial nanocomposite in active food packaging systems for shelf-life extension of perishable commodities.

Alginate: Microbial production, functionalization, and biomedical applications

Alginates are natural polysaccharides widely participating in food, pharmaceutical, and environmental applications due to their excellent gelling capacity. Their excellent biocompatibility and biodegradability further extend their application to biomedical fields. The low consistency in molecular weight and composition of algae-based alginates may limit their performance in advanced biomedical applications. It makes microbial alginate production more attractive due to its potential for customizing alginate molecules with stable characteristics. Production costs remain the primary factor limiting the commercialization of microbial alginates. However, carbon-rich wastes from sugar, dairy, and biodiesel industries may serve as potential substitutes for pure sugars for microbial alginate production to reduce substrate costs. Fermentation parameter control and genetic engineering strategies may further improve the production efficiency and customize the molecular composition of microbial alginates. To meet the specific needs of biomedical applications, alginates may need functionalization, such as functional group modifications and crosslinking treatments, to achieve enhanced mechanical properties and biochemical activities. The development of alginate-based composites incorporated with other polysaccharides, gelatin, and bioactive factors can integrate the advantages of each component to meet multiple requirements in wound healing, drug delivery, and tissue engineering applications. This review provided a comprehensive insight into the sustainable production of high-value microbial alginates. It also discussed recent advances in alginate modification strategies and alginate-based composites for representative biomedical applications.

Adipose-Derived Stromal Cells within a Gelatin Matrix Acquire Enhanced Regenerative and Angiogenic Properties: A Pre-Clinical Study for Application to Chronic Wounds

This study evaluates the influence of a gelatin sponge on adipose-derived stromal cells (ASC). Transcriptomic data revealed that, compared to ASC in a monolayer, a cross-linked porcine gelatin sponge strongly influences the transcriptome of ASC. Wound healing genes were massively regulated, notably with the inflammatory and angiogenic factors. Proteomics on conditioned media showed that gelatin also acted as a concentrator and reservoir of the regenerative ASC secretome. This secretome promoted fibroblast survival and epithelialization, and significantly increased the migration and tubular assembly of endothelial cells within fibronectin. ASC in gelatin on a chick chorioallantoic membrane were more connected to vessels than an empty sponge, confirming an increased angiogenesis in vivo. No tumor formation was observed in immunodeficient nude mice to which an ASC gelatin sponge was transplanted subcutaneously. Finally, ASC in a gelatin sponge prepared from outbred rats accelerated closure and re-vascularization of ischemic wounds in the footpads of rats. In conclusion, we provide here preclinical evidence that a cross-linked porcine gelatin sponge is an optimal carrier to concentrate and increase the regenerative activity of ASC, notably angiogenic. This formulation of ASC represents an optimal, convenient and clinically compliant option for the delivery of ASC on ischemic wounds.

3D bioprinting of a gradient stiffened gelatin-alginate hydrogel with adipose-derived stem cells for full-thickness skin regeneration

Current hydrogel-based scaffolds offer a promising approach to accelerate tissue regeneration, but great challenges remain in developing platforms that mimic the physical microenvironment of tissues combined with therapeutic biological cues. Here, a 3D bioprinting gelatin-alginate hydrogel for the construction of gradient composite scaffolds that mimic the dermal stiffness microenvironment was developed for architecture construction by extruding the bioink on calcium-containing substrates to achieve gradient secondary cross-linking, meanwhile, adipose-derived stem cells were encapsulated in the present hydrogels for therapeutic purposes. The gradient-stiffness scaffold exhibited good stability and biocompatibility as well as enhanced proliferation and migration of the adipose-derived stem cells. In addition, the promoted angiogenesis and healing efficiency was demonstrated via the animal wound model and was mainly attributed to the enhanced paracrine secretion of adipose-derived stem cells by the physical microenvironment provided within the gradient stiffness scaffold. The current 3D printed gradient scaffolds provide adipose-derived stem cells with a distinct yet successive architecture rather than the typical uniform microenvironment to accelerate skin regeneration, which may have broader applications in other chronic wounds or tissue defects.

Alginate-Based Hydrogels and Scaffolds for Biomedical Applications

Alginate is a natural polymer of marine origin and, due to its exceptional properties, has great importance as an essential component for the preparation of hydrogels and scaffolds for biomedical applications. The design of biologically interactive hydrogels and scaffolds with advanced, expected and required properties are one of the key issues for successful outcomes in the healing of injured tissues. This review paper presents the multifunctional biomedical applications of alginate-based hydrogels and scaffolds in selected areas, highlighting the key effect of alginate and its influence on the essential properties of the selected biomedical applications. The first part covers scientific achievements for alginate in dermal tissue regeneration, drug delivery systems, cancer treatment, and antimicrobials. The second part is dedicated to our scientific results obtained for the research opus of hydrogel materials for scaffolds based on alginate in synergy with different materials (polymers and bioactive agents). Alginate has proved to be an exceptional polymer for combining with other naturally occurring and synthetic polymers, as well as loading bioactive therapeutic agents to achieve dermal, controlled drug delivery, cancer treatment, and antimicrobial purposes. Our research was based on combinations of alginate with gelatin, 2-hydroxyethyl methacrylate, apatite, graphene oxide and iron(III) oxide, as well as curcumin and resveratrol as bioactive agents. Important features of the prepared scaffolds, such as morphology, porosity, absorption capacity, hydrophilicity, mechanical properties, in vitro degradation, and in vitro and in vivo biocompatibility, have shown favorable properties for the aforementioned applications, and alginate has been an important link in achieving these properties. Alginate, as a component of these systems, proved to be an indispensable factor and played an excellent “role” in the optimal adjustment of the tested properties. This study provides valuable data and information for researchers and demonstrates the importance of the role of alginate as a biomaterial in the design of hydrogels and scaffolds that are powerful medical “tools” for biomedical applications.

The Fabrication of Gelatin-Elastin-Nanocellulose Composite Bioscaffold as a Potential Acellular Skin Substitute

Gelatin usage in scaffold fabrication is limited due to its lack of enzymatic and thermal resistance, as well as its mechanical weakness. Hence, gelatin requires crosslinking and reinforcement with other materials. This study aimed to fabricate and characterise composite scaffolds composed of gelatin, elastin, and cellulose nanocrystals (CNC) and crosslinked with genipin. The scaffolds were fabricated using the freeze-drying method. The composite scaffolds were composed of different concentrations of CNC, whereas scaffolds made of pure gelatin and a gelatin-elastin mixture served as controls. The physicochemical and mechanical properties of the scaffolds, and their cellular biocompatibility with human dermal fibroblasts (HDF), were evaluated. The composite scaffolds demonstrated higher porosity and swelling capacity and improved enzymatic resistance compared to the controls. Although the group with 0.5% (w/v) CNC recorded the highest pore size homogeneity, the diameters of most of the pores in the composite scaffolds ranged from 100 to 200 μm, which is sufficient for cell migration. Tensile strength analysis revealed that increasing the CNC concentration reduced the scaffolds' stiffness. Chemical analyses revealed that despite chemical and structural alterations, both elastin and CNC were integrated into the gelatin scaffold. HDF cultured on the scaffolds expressed collagen type I and α-SMA proteins, indicating the scaffolds' biocompatibility with HDF. Overall, the addition of elastin and CNC improved the properties of gelatin-based scaffolds. The composite scaffolds are promising candidates for an acellular skin substitute.

Strontium-loaded hydrogel scaffolds to promote gingival fibroblast function

Dental implant clinical success is dependent on effective peri-implant tissue attachment to the trans-mucosal portion following placement. Modification of transmucosal implant surfaces can improve cellular adhesion and function leading to formation of an effective soft-tissue seal during healing, of which gingival fibroblasts are prominent cells to migrate to repair wounds and crucial for the development of a collagen rich connective tissue. Biocompatible loaded scaffold materials have been developed to allow local release of molecules with effective biological activity. Our previous studies indicate that strontium can promote gingival fibroblast metabolism, decrease apoptosis and support adhesion to titanium healing abutments. In this study, we developed a strontium-loaded alginate hydrogel scaffold which can be easily personalized to fit over any size and shape of implant transmucosal collar or healing abutment. Results indicate that biologically active strontium ions are effectively released from loaded alginate hydrogel material to promote fibroblast viability and migration to repair in vitro wounds similar to that of strontium citrate solution. Overall, this novel strontium-loaded alginate scaffold device displays good biocompatibility and functionality, demonstrating high potential as a system to provide local delivery of strontium to improve peri-implant mucosal healing following implant placement and clinical success.

Cellulose Nanocrystals-Incorporated Thermosensitive Hydrogel for Controlled Release, 3D Printing, and Breast Cancer Treatment Applications

In situ-gel-forming thermoresponsive copolymers have been widely exploited in controlled delivery applications because their critical gel temperature is similar to human body temperature. However, there are limitations to controlling the delivery of biologics from a hydrogel network because of the poor networking and reinforcement between the copolymer networks. This study developed an in situ-forming robust injectable and 3D printable hydrogel network based on cellulose nanocrystals (CNCs) incorporated amphiphilic copolymers, poly(ε-caprolactone-co-lactide)-b-poly(ethylene glycol)-b-poly(ε-caprolactone-co-lactide (PCLA). In addition, the physicochemical and mechanical properties of injectable hydrogels were controlled by physically incorporating CNCs with amphiphilic PCLA copolymers. CNCs played an unprecedented role in physically reinforcing the PCLA copolymers' micelle network via intermicellar bridges. Apart from that, the free-flowing closely packed rod-like CNCs incorporated PCLA micelle networks at low temperature transformed to a stable viscoelastic hydrogel network at physiological temperature. CNC incorporated PCLA copolymer sols effectively coordinated with hydrophobic doxorubicin and water-soluble lysozyme by a combination of hydrophobic and hydrogen bonding interaction and controlled the release of biologics. As shown by the 3D printing results, the biocompatible PCLA hydrogels continuously extruded during printing had good injectability and maintained high shape fidelity after printing without any secondary cross-linking steps. The interlayer bonding between the printed layers was high and formed stable 3D structures up to 10 layers. Subcutaneous injection of free-flowing CNC incorporated PCLA copolymer sols to BALB/c mice formed a hydrogel instantly and showed controlled biodegradation of the hydrogel depot without induction of toxicity at the implantation sites or surrounding tissues. At the same time, the in vivo antitumor effect on the MDA-MB-231 tumor xenograft model demonstrated that DOX-loaded hydrogel formulation significantly inhibited the tumor growth. In summary, the CNC incorporated biodegradable hydrogels developed in this study exhibit a prolonged release with special release kinetics for hydrophobic and hydrophilic biologics.

Tiny tots for a big-league in wound repair: Tools for tissue regeneration by nanotechniques of today

Overall, chronic injuries place considerable burden on patients and health systems. The skin injuries are exposed to inflammatory bacteria and hinder the healing process. The skin being the biggest tissue of the whole body ensures protection against microbial invasion, dehydration, and against chemical, thermal, bright radiations and mechanical agents. When injured, the skin loses its defensive purpose and the attack of bacterial types arises with the loss of protein, water, and electrolytes. Improved wound closure therapy helps to restore normal skin function by managing wounds with the help of a suitable skin replacement. According to the type of wound and its healing ability, an appropriate skin replacement system must be identified. Nanofibrous layers because of their permeable structure, their large superficial reach and their similarity with the local extracellular network serve as cutaneous substitution for dealing with deep and superficial injuries. By a diminished microbial load without infestation, scab formation and infiltration of defense cells in the initial phase, acute injuries are usually characterized. Here recovery is related with epithelialization, angiogenesis and relocation of fibroblasts. The wound becomes obstinate when microbial biofilms are developed while the immune system does not manage to eliminate the infection. Increased inflammatory process, lower deep tissue oxygenation, fibrin cuffs, fibroblastic senescence, altered angiogenesis, stalled re-epithelialization and chronic infection have been visualized. Conventional wound mending treatments for the most part falling flat to supply a great clinical result, either basically like wound epithelialization and regulation of fluid loss or practically like histological highlights that decide versatility, strength, affectability, etc. Conventional wound therapies commonly fail to offer a better medical output, like wound epithelialization and regulation of fluid reduction or physiologically like cellular features that determine durability, sensitivity, elasticity, etc. Nanotechnology may be a dependable investigation space for wound-healing treatments through their versatile physicochemical properties. Advancing nano platforms with novel solutions for curing chronicdiabetic wounds are discussed in detail that can guide further research in this sector.

Effectiveness of Nano Bioactive Glass Fiber Loaded with Platelet-Rich Plasma on Thermal Wound Healing Process in Rats

In this study we evaluated the impact of topical application of bioactive glass fibers loaded PRP on a deep seconddegree thermal wound and its healing process sub-streaming molecular pathway of re-epithelialization. Wistar rats were randomly divided into four groups: normal control group, model group (deep second-degree thermal wound), PRP group, and PRP+nanobioactive glass fiber group. After treatment, the changes of wounds were observed daily. H&E staining was used to evaluate the pathological changes and also, qRT-PCR was used to detect the mRNA expression of KGF, IL-1, IL-6, IL-10, TGF-β, EGF, VEGF, HIF-1α, integrin α3 and integrin β1 in wound tissues. In the current study, we observed that PRP group and the PRP group basically re-epithelized on the 21st day. The wound healing rates of the PRP+nanobioactive glass fiber group and PRP group at each time point were higher than those in the model group, while there was no significant difference in wound healing rate between the PRP+nanobioactive glass fiber group and PRP group at each time point. H&E staining showed that the pathological scores of skin wound repairing in the PRP+nanobioactive glass fiber group on the 7th, 14th and 21st day were higher than that of in the model group. The qPCR results suggested the mRNA expression of IL-1, IL-6 and IL-10 in the PRP+nanobioactive glass fiber group and the PRP group were lower than those in the untreated group on the 14th day; the expression of VEGF and EGF mRNA were higher on the 3rd day; the mRNA expression of TGF-β, HIF-1α showed a tendency of increasing first and decreasing then; integrin β1 mRNA expression increased significantly, which was highest; integrin α3 mRNA expression was higher on day 3rd and 21th, respectively. The PRP+nanobioactive glass fibers and PRP can shorten the wound healing time and improve the healing quality mainly by promoting the wound epithelization through increasing the expression of EGF, VEGF, TGF-β, HIF-1α, Integrin α3, and meanwhile increasing the release of Integrin β1 and other mechanisms.

Development of a Hybrid Nanoink for 3D Bioprinting of Heterogeneous Tumor Models

Despite the rapid progress in applying three-dimensional (3D) printing in the field of tissue engineering, fabrication of heterogeneous and complex 3D tumor models remains a challenge. In this study, we report a hybrid nanoink (AGC) composed of alginate, gelatin methacryloyl (GelMA), and cellulose nanocrystal (CNC), designed for multinozzle microextrusion 3D printing of tumor models. Our results show that the ink consisting of 2 wt % alginate, 4 wt % GelMA, and 6 wt % cellulose nanocrystals (AGC246) possesses a superior shear-thinning property and little hysteresis in viscosity recovery. The fabrication of a colorectal cancer (CRC) model is demonstrated by printing a 3D topological substrate with AGC246 and then seeding/printing endothelial (EA-hy 926) and colorectal carcinoma (HCT 116) cells on top. Direct seeding of cells by dropping a cell suspension onto the 3D substrate with distinctive topological features (villi and trenches) deemed inadequate in either creating a monolayer of endothelial cells or precise positioning of cancer cell clusters, even with surface treatment to promote cell adhesion. In contrast, 3D biopinting of a CRC model using cell-laden AGC153, coupled with dual ultraviolet (UV) and ionic cross-linking, is shown to be successful. Hence, this study brings advancements in 3D bioprinting technology through innovative material and methodology designs, which could enable the fabrication of complex in vitro models for both fundamental studies of disease processes and applications in drug screening.

Nanocomposites Assembled via Electrostatic Interactions between Cellulose Nanocrystals and a Cationic Polymer

On account of their high strength and stiffness and their renewable nature, cellulose nanocrystals (CNCs) are widely used as a reinforcing component in polymer nanocomposites. However, CNCs are prone to aggregation and this limits the attainable reinforcement. Here, we show that nanocomposites with a very high CNC content can be prepared by combining the cationic polymer poly[(2-(methacryloyloxy)ethyl) trimethylammonium chloride] (PMETAC) and negatively charged, carboxylated CNCs that are provided as a sodium salt (CNC-COONa). Free-standing films of the composites can be prepared by simple solvent casting from water. The appearance and polarized optical microscopy and electron microscopy images of these films suggest that CNC aggregation is absent, and this is supported by the very pronounced reinforcement observed. The incorporation of 33 wt % CNC-COONa into PMETAC allowed increasing the storage modulus of this already rather stiff, glassy amorphous matrix polymer from 1.5 ± 0.3 to 6.6 ± 0.1 GPa, while the maximum strength increased from 11 to 32 MPa. At this high CNC content, the reinforcement achieved in the PMETAC/CNC-COONa nanocomposite is much more pronounced than that observed for a reference nanocomposite made with unmodified CNCs (CNC-OH).

Cationic, anionic and neutral polysaccharides for skin tissue engineering and wound healing applications

Today, chronic wound care and management can be regarded as a clinically critical issue. However, the limitations of current approaches for wound healing have encouraged researchers and physicians to develop more efficient alternative approaches. Advances in tissue engineering and regenerative medicine have resulted in the development of promising approaches that can accelerate wound healing and improve the skin regeneration rate and quality. The design and fabrication of scaffolds that can address the multifactorial nature of chronic wound occurrence and provide support for the healing process can be considered an important area requiring improvement. In this regard, polysaccharide-based scaffolds have distinctive properties such as biocompatibility, biodegradability, high water retention capacity and nontoxicity, making them ideal for wound healing applications. Their tunable structure and networked morphology could facilitate a number of functions, such as controlling their diffusion, maintaining wound moisture, absorbing a large amount of exudates and facilitating gas exchange. In this review, the wound healing process and the influential factors, structure and properties of carbohydrate polymers, physical and chemical crosslinking of polysaccharides, scaffold fabrication techniques, and the use of polysaccharide-based scaffolds in skin tissue engineering and wound healing applications are discussed.

Poly (caprolactone)/sodium-alginate-functionalized halloysite clay nanotube nanocomposites: Potent biocompatible materials for wound healing applications

In this study, halloysite nanotubes (HNTs) were subjected to surface functionalization using sodium alginate and incorporated into poly(caprolactone) (PCL) to fabricate nanocomposites for potential wound healing applications. The nanocomposite films were fabricated through the solution casting technique and characterized using various instrumental methods. The films exhibited enhanced thermal and mechanical properties. FE-SEM and AFM analyses confirmed the uniform dispersion of the HNTs and increased roughness of the films, respectively. The swelling properties, in-vitro enzymatic degradation, and anti-inflammatory activity of the films were also analyzed. The MTT assay performed using NIH3T3 cell lines revealed enhanced cell proliferation (126 ± 1.38) of 5 wt% film. Besides, the cell adhesion tests of the films revealed their cytocompatibility. The scratch assay tests conducted for observing the effectiveness of the films for wound closure showed that the 5 wt% film offered a higher rate of fibroblast cell migration (32.24 ± 0.49) than the pristine PCL film. The HRBCMS assay demonstrated the hemocompatibility of these films. The biological test results indicated the delayed enzymatic degradability and haemocompatiblity of nanocomposites with enhanced cell adhesion, cell proliferation, and cell migration capabilities with respect to fibroblast cells. In summary, the synthesized nanocomposite films can be effectively used in wound healing applications after further clinical trials.

Nanofiber as a novel vehicle for transdermal delivery of therapeutic agents: challenges and opportunities

Background

Transdermal delivery of drugs is a quite challenging task for pharmaceutical scientists. The transdermal route is preferred over the oral route due to various advantages like avoidance of the first-pass effect, non-invasiveness, and high patient compliance. Therefore, it is necessary to develop an effective carrier system that enables the effective passage of the drug through the dermal barrier.

Main body of abstract

Various novel drug delivery systems are used to enhance the permeation of a variety of drugs through the skin barrier. Researchers around the globe have explored nanofibers for the transdermal delivery of various therapeutic agents. Nanofibers are designed to have a high concentration of therapeutic agents in them promoting their flux through various skin layers. Polymeric nanofibers can be explored for the loading of both hydrophilic and lipophilic drugs. Biopolymer-based nanofibers have been also explored for transdermal delivery. They are capable of controlling the release of therapeutic agents for a prolonged time.

Short conclusion

The literature presented in this review paper provides significant proof that nanofibers will have an intense impact on the transdermal delivery of different bioactive molecules in the future.

Graphic abstract

The Role of Calcium in Wound Healing

Skin injury is quite common, and the wound healing is a complex process involving many types of cells, the extracellular matrix, and soluble mediators. Cell differentiation, migration, and proliferation are essential in restoring the integrity of the injured tissue. Despite the advances in science and technology, we have yet to find the ideal dressing that can support the healing of cutaneous wounds effectively, particularly for difficult-to-heal chronic wounds such as diabetic foot ulcers, bed sores, and venous ulcers. Hence, there is a need to identify and incorporate new ideas and methods to design a more effective dressing that not only can expedite wound healing but also can reduce scarring. Calcium has been identified to influence the wound healing process. This review explores the functions and roles of calcium in skin regeneration and reconstruction during would healing. Furthermore, this review also investigates the possibility of incorporating calcium into scaffolds and examines how it modulates cutaneous wound healing. In summary, the preliminary findings are promising. However, some challenges remain to be addressed before calcium can be used for cutaneous wound healing in clinical settings.

New cellulose-collagen-alginate materials incorporated with quercetin, anthocyanins and lipoic acid

Herein we present a new biomaterial based on cellulose, collagen and sodium alginate which served as a matrix for the incorporation of bioactive substances with antioxidant properties. Compared with pure cellulose hydrogels, the compressive strength and the elastic modulus of cellulose-collagen-alginate hydrogels were significantly enhanced, thus the compressive strength increased from 0.256 kPa to 6.91 kPa, while the elastic modulus increased from 0.0023 kPa to 0.115 kPa at 30% strain level. The release kinetic of all drugs through matrix components was done according to the Korsmeyer-Peppas model with a Fickian diffusion. The presence of bioactive principles, quercetin, lipoic acid and anthocyanins, gives biomaterials an antioxidant capacity on average 30% higher compared to the base matrix. The mechanical resistance, mucoadhesiveness, bioadhesiveness, release kinetic, and antioxidant capacity of active principles, recommend these biomaterials for the manufacture of transdermal drug delivery devices.

Changes of Mineralogical Properties and Biological Activities of Gypsum and Its Calcined Products with Different Phase Structures

Raw gypsum (RG) and calcined gypsum (CG) are widely used in traditional Chinese medicine (TCM). RG is usually taken orally to resolve heat and diminish inflammation, while CG is only used externally to treat ulcerations and empyrosis. Calcination at different temperatures, three phase CG structures, namely, bassanite, anhydrite III, and anhydrite II, may be generated. We herein investigated the relationship between the phase structure and the efficacy of CG and the optimum phase structure for CG. RG has a compact structure, small pore size, weak anti-inflammatory effect, but no antibacterial effect, and has almost no effect on the repair of scalds. CG150 (bassanite) has a loose texture, large pore size and specific surface area, and certain antibacterial and anti-inflammatory effects, but it has a poor repair effect on scalds. CG750 (anhydrite II) has a compact structure, small pore size and specific surface area, and low antibacterial and anti-inflammatory effects, but it has a certain repair effect on scalds. Only CG350 (anhydrite III) has good performance in texture, pore size, specific surface area, antibacterial, anti-inflammatory, and scald repair. Our research has proved that the mineral properties and biological activities of CG are different due to different phase structures. CG350, namely, anhydrite III, is considered by our research to be the optimal phase structure as CG.

The potential impact of polyethylenimine on biological behavior of 3D-printed alginate scaffolds

Three-dimensional (3D) printing using biocompatible materials is a novel technology having a great potential for fabricating precise 3D scaffolds for tissue engineering. Alginate hydrogel undergoes unstable swelling and degradation properties as well as suffers from poor cell adhesion due to the lack of cell binding domains. These limit its applications in tissue engineering. In this study, 3D-printed alginate scaffolds were coated by branch polyethylenimine (PEI) to overcome the limitation of alginate because the branch PEI is a cationic polymer with a large number of active N-H groups. The results indicated that surface modification of 3D-printed alginate scaffolds using an appropriate concentration of PEI potentially promoted the fibroblast cells functions in 3D-printed alginate scaffolds, increased cell adhesion, cell proliferation and cell spreading through providing a large amount of N-H groups and increasing hydrophilicity of the surface. The degradation rate of alginate was degraded by interaction between N-H groups in PEI and -COO- groups in alginate structure and followed by the formation strong barrier layer in the interface of alginate and PEI. Therefore, ALG-PEI scaffolds can be a good candidate for tissue engineering and wound dressing applications.

A Review on the Adaption of Alginate-Gelatin Hydrogels for 3D Cultures and Bioprinting

Sustaining the vital functions of cells outside the organism requires strictly defined parameters. In order to ensure their optimal growth and development, it is necessary to provide a range of nutrients and regulators. Hydrogels are excellent materials for 3D in vitro cell cultures. Their ability to retain large amounts of liquid, as well as their biocompatibility, soft structures, and mechanical properties similar to these of living tissues, provide appropriate microenvironments that mimic extracellular matrix functions. The wide range of natural and synthetic polymeric materials, as well as the simplicity of their physico-chemical modification, allow the mechanical properties to be adjusted for different requirements. Sodium alginate-based hydrogel is a frequently used material for cell culture. The lack of cell-interactive properties makes this polysaccharide the most often applied in combination with other materials, including gelatin. The combination of both materials increases their biological activity and improves their material properties, making this combination a frequently used material in 3D printing technology. The use of hydrogels as inks in 3D printing allows the accurate manufacturing of scaffolds with complex shapes and geometries. The aim of this paper is to provide an overview of the materials used for 3D cell cultures, which are mainly alginate-gelatin hydrogels, including their properties and potential applications.

3D-printed bioactive and biodegradable hydrogel scaffolds of alginate/gelatin/cellulose nanocrystals for tissue engineering

The 3D-printed hybrid biodegradable hydrogels composed of alginate, gelatin, and cellulose nanocrystals (CNCs) were prepared to provide a favorable environment for cell proliferation, adhesion, nutrients exchange, and matrix mineralization for bone tissue engineering (BTE) applications. The hybrid scaffolds exhibited enhanced mechanical strength compared to the pure polymer scaffolds. The biocompatibility, differentiation potential, and bone regeneration potential of the printed scaffolds were evaluated by DAPI staining, live-dead assay, alizarin Red-S (ARS) staining, real-time PCR (qRT-PCR), and μCT analysis, respectively. Enhanced cell proliferation has occurred 1% CNC/Alg/Gel scaffolds compared to the control. The cells were adequately adhered to the scaffold and exhibited the flattened structure. Improved mineralization was observed in the 1% CNC/Alg/Gel scaffolds' presence than the control, showing their mineralization efficiency. A significant enhancement in the expression of osteogenic-specific gene markers (Runx2, ALP, BMP-2, OCN, OPN, BSP, and COL1) has occurred with 1% CNC/Alg/Gel than the control, indicating their osteogenic potential. Furthermore, enhanced bone formation was observed in the scaffolds treated groups than the control in the calvaria critical-sized defects (CCD-1) model, suggesting their improved bone regeneration potential. Therefore, the fabricated scaffolds have the potential to explore as a biomaterial for tissue engineering.

Curcumin-Loaded Bacterial Cellulose/Alginate/Gelatin as A Multifunctional Biopolymer Composite Film

Multifunctional biopolymer composites comprising mechanically-disintegrated bacterial cellulose, alginate, gelatin and curcumin plasticized with glycerol were successfully fabricated through a simple, facile, cost-effective mechanical blending and casting method. SEM images indicate a well-distributed structure of the composites. The water contact angles existed in the range of 50-70°. Measured water vapor permeability values were 300-800 g/m2/24 h, which were comparable with those of commercial dressing products. No release of curcumin from the films was observed during the immersion in PBS and artificial saliva, and the fluid uptakes were in the range of 100-700%. Films were stretchable and provided appropriate stiffness and enduring deformation. Hydrated films adhered firmly onto the skin. In vitro mucoadhesion time was found in the range of 0.5-6 h with porcine mucosa as model membrane under artificial saliva medium. The curcumin-loaded films had substantial antibacterial activity against E. coli and S. aureus. The films showed non-cytotoxicity to human keratinocytes and human gingival fibroblasts but exhibited potent anticancer activity in oral cancer cells. Therefore, these curcumin-loaded films showed their potential for use as leave-on skin applications. These versatile films can be further developed to achieve desirable characteristics for local topical patches for wound care, periodontitis and oral cancer treatment.

Freeze-gelled alginate/gelatin scaffolds for wound healing applications: An in vitro, in vivo study

In this study, fabrication of a three-dimensional porous scaffold was performed using freeze gelation method. Recently, fabrication of scaffolds using polymer blends has become common for many tissue engineering applications due to their unique tunable properties. In this work, we fabricated alginate-gelatin porous hydrogels for wound healing application using a new method based on some modifications to the freeze-gelation method. Alginate and gelatin were mixed in three different ratios and the resulting solutions underwent freeze gelation to obtain 3D porous matrices. We analyzed the samples using different characterization tests. The scanning electron microscopy (SEM) results indicated that the freeze gelation method was successful in obtaining porous morphologies for all the fabricated alginate-gelatin samples as previously was seen in single-polymer fabrication using this method. The alginate to gelatin ratio affected swelling, biodegradation, cell culture and mechanical properties of the matrices. The scaffold with the lowest content of gelatin had the highest swelling ratio while biodegradation and cell proliferation and viability were increased with the gelatin content. Regarding the mechanical properties, as the gelatin content increased, the scaffold became more ductile and showed higher tensile strength. The in-vivo results also showed the biocompatibility of the blend scaffold and its positive role in wound healing process in rats. The low-cost procedure used in this study to fabricate the porous alginate-gelatin scaffolds can be adapted and modified to suit different tissue engineering applications.

Wet-spinning of fluorescent fibers based on gold nanoclusters-loaded alginate for sensing of heavy metal ions and anti-counterfeiting

Fluorescent and robust fibers based on gold nanoclusters-loaded alginate were successfully prepared by wet spinning of gold nanoclusters and alginate. The relationship between process conditions, mechanical properties, and fluorescent properties of fibers was investigated. The as-prepared fibers exhibited high mechanical strength (up to 7.09 cN/dtex) and remarkable red emission under ultraviolet excitation. The fibers could be used as a simple, low-cost, and high-selectivity fluorescent sensor for detecting Cu²⁺ and Hg²⁺ among various metal ions in aqueous solution, with a detection limit as low as 187.99 nM for Cu²⁺ and 82.14 nM for Hg²⁺, respectively. Furthermore, the novel fluorescent fibers were used as an anti-counterfeiting label through knitting into textile materials. The wet-spun functional fibers may be applied to the design of smart wearable sensors and flexible optical sensors.