An injectable molecular hydrogel assembled by antimicrobial peptide PAF26 for antimicrobial application

Guard against internal and external: An antibacterial, anti-inflammation and healing-promoting spray gel based on lyotropic liquid crystals for the treatment of diabetic wound

The diabetic wound is a prevalent and serious complication of diabetes, which easily deteriorates due to susceptibility to infection and difficulty in healing, causing a high risk of amputation and economic burden to patients. Bacterial infection, persistent excessive inflammation, and cellular and angiogenesis disorders are the main reasons for the difficulty of diabetic wound healing. In this study, glycerol monooleate (GMO) was used to prepare lyotropic liquid crystal hydrogel (LLC) containing the natural antimicrobial peptide LL37 and carbenoxolone (CBX) to achieve antibacterial, anti-inflammation, and healing promotion for the treatment of diabetic wounds. The shear-thinning properties of the LLC precursor solution allowed it to be administered in the form of a spray, which perfectly fitted the shape of the wound and transformed into a gel after absorbing wound exudate to act as a wound protective barrier. The faster release of LL37 realized rapid sterilization of wounds, controlled the source of inflammation, and accelerated wound healing. The inflammatory signaling pathway was blocked by the subsequently released CBX, and the spread of the inflammatory response was inhibited and then further weakened. In addition, CBX down-regulated connexin (Cx43) to assist LL37 to promote cell migration and proliferation better. Combined with the pro-angiogenic effect of LL37, the healing of diabetic wounds was significantly accelerated. All these advantages made LL37-CBX-LLC a promising approach for the treatment of chronic diabetic wounds.

Recent Advances in Antimicrobial Peptide Hydrogels

Advances in the number and type of available biomaterials have improved medical devices such as catheters, stents, pacemakers, prosthetic joints, and orthopedic devices. The introduction of a foreign material into the body comes with a risk of microbial colonization and subsequent infection. Infections of surgically implanted devices often lead to device failure, which leads to increased patient morbidity and mortality. The overuse and improper use of antimicrobials has led to an alarming rise and spread of drug-resistant infections. To overcome the problem of drug-resistant infections, novel antimicrobial biomaterials are increasingly being researched and developed. Hydrogels are a class of 3D biomaterials consisting of a hydrated polymer network with tunable functionality. As hydrogels are customizable, many different antimicrobial agents, such as inorganic molecules, metals, and antibiotics have been incorporated or tethered to them. Due to the increased prevalence of antibiotic resistance, antimicrobial peptides (AMPs) are being increasingly explored as alternative agents. AMP-tethered hydrogels are being increasingly examined for antimicrobial properties and practical applications, such as wound-healing. Here, we provide a recent update, from the last 5 years of innovations and discoveries made in the development of photopolymerizable, self-assembling, and AMP-releasing hydrogels.

Peptide hydrogel based sponge patch for wound infection treatment

Dressing with the function of anti-wound infection and promoting skin repair plays an important role in medicine, beauty industry, etc. In terms of anti-wound infection, traditional dressings, such as gauze, have problems such as excessive bleeding in the process of contact or removal, and slow wound healing due to poor biological compatibility. The development of new functional and biocompatible dressings has essential application value in biomedical fields. In this study, a new type of dressing based on polypeptide functional sponge patch was constructed. The porous sponge patch is made of antimicrobial peptide and medical agarose through gel and freeze-drying technology. In vitro antibacterial experiments and small animal skin wound infection model experiments show that the porous sponge has excellent antibacterial and anti-skin infection activities, as well as the function of promoting wound healing.

Strategies for Improving Peptide Stability and Delivery

Peptides play an important role in many fields, including immunology, medical diagnostics, and drug discovery, due to their high specificity and positive safety profile. However, for their delivery as active pharmaceutical ingredients, delivery vectors, or diagnostic imaging molecules, they suffer from two serious shortcomings: their poor metabolic stability and short half-life. Major research efforts are being invested to tackle those drawbacks, where structural modifications and novel delivery tactics have been developed to boost their ability to reach their targets as fully functional species. The benefit of selected technologies for enhancing the resistance of peptides against enzymatic degradation pathways and maximizing their therapeutic impact are also reviewed. Special note of cell-penetrating peptides as delivery vectors, as well as stapled modified peptides, which have demonstrated superior stability from their parent peptides, are reported.

Study on the self-assembly of aromatic antimicrobial peptides based on different PAF26 peptide sequences

Antimicrobial peptide (AMP) self-assembly is an effective way to synthesis antimicrobial biomaterials. In previous studies, we found PAF26 AMP (Ac-RKKWFW-NH2) and its derivative K2–F2 peptide (Ac-KKRKKWFWFF-NH2) could both self-assemble into hydrogels, but they had distinct microscopic structures. Therefore, in this work five PAF26 peptide derivatives with different numbers of aromatic amino acids are designed to better understand the self-assembly mechanism of aromatic AMP. The transmission electron microscopy, infrared spectroscopy, circular dichroism, and fluorescence spectroscopy characterizations are carried out to study the microscope structure, secondary conformation, and molecular interactions. It is found that the five peptide derivatives have different microscopic structures, and the number of aromatic amino acids will affect the peptide hydrogen bonding and aromatic stacking interactions, causing significant differences in the secondary conformation and microscopic structure. This work will enhance the comprehension of aromatic AMP self-assembly.

A bacteria-resistant and self-healing spray dressing based on lyotropic liquid crystals to treat infected post-operative wounds

The delayed healing of infected post-operative wounds has turned into a worldwide medical problem. In the clinical treatment, effective bacterial clearance and promoted wound healing were considered as two crucial aspects. However, the effect of current dressings with antibacterial activity was limited due to the declined efficacy against antibiotic-resistant bacteria, and poor mechanical property during skin extension and compression movement. In this project, a lyotropic liquid crystal (LLC)-based bacteria-resistant and self-healing spray dressing loaded with ε-polylysine (PLL) was designed. Owing to the unique antibacterial mechanism, PLL was expected to kill antibiotic-resistant bacteria efficiently, even the "superbug" methicillin-resistant Staphylococcus aureus (MRSA). The cubic cells of LLC were applied to encapsulate PLL to improve its stability and induce a sustained release, further realizing a long-term antibacterial effect. Meanwhile, the LLC precursor (LLCP) could extend to the irregular edges of the wound, and spontaneously transited to a cubic phase gel once exposed to physiological fluid. This 3D structure was also endowed with mechanically responsive viscoelasticity that formed a robust and flexible defense for wounds. An excellent antibacterial activity with more than 99% MRSA killed in 3 h was demonstrated by a killing kinetics study. The long-term effect was also proved by measuring the bacteriostatic circle test within 48 h. In addition, the unique sol-gel phase transition behavior and superior self-healing capacity of PLL-LLCP was verified with the rheological study and self-recoverable conformal deformation test in vivo. In the infected post-operative wound model, satisfactory bacterial clearance and prominent wound healing promotion were realized by PLL-LLCP, with the survival of the bacteria at lower than 0.1% and the wound closure at higher than 90%. Thus, PLL-LLCP was believed to be an excellent candidate for the therapy of infected post-operative wounds.

Tannic acid-inspired, self-healing, and dual stimuli responsive dynamic hydrogel with potent antibacterial and anti-oxidative properties

Due to their intrinsic injectable and self-healing characteristics, dynamic hydrogels, based on dynamic covalent bonds, have gained a great attention. In this study, a novel dynamic hydrogel based on the boronic ester dynamic covalent bond is facilely developed using phenylboronic acid-modified hyaluronic acid (HA-PBA) and plant-derived polyphenol-tannic acid (TA). The dynamic hydrogel gelated quickly under mild conditions and had favorable viscoelastic properties with good self-healing and shear-thinning capabilities. Moreover, the simultaneous utilization of TA as a reductant for the green synthesis of silver nanoparticles (AgNP) inspired the preparation of a TA-reduced AgNP hybrid dynamic hydrogel with potent and broad-spectrum antibacterial activities. The dynamic hydrogels could also be applied for pH- and reactive oxygen species (ROS)-responsive release of loaded protein molecules without showing evident cytotoxicity and hemolysis in vitro. In addition, the dynamic hydrogels showed the anti-oxidative properties of high free radical and ROS scavenging capacity, which was verified by the DPPH (2,2-diphenyl-1-picryl-hydrazyl-hydrate) free radical assay and ROS fluorescence staining. Overall, this novel class of cytocompatible, self-healing, dual stimuli responsive, antibacterial, anti-oxidative, and injectable hydrogels could be promising as a wound dressing for chronic wound healing.

Nanocapsule designs for antimicrobial resistance

The pressing need of new antimicrobial products is growing stronger, particularly because of widespread antimicrobial resistance, endangering our ability to treat common infections. The recent coronavirus pandemic has dramatically highlighted the necessity of effective antibacterial and antiviral protection. This work explores at the molecular level the mechanism of action of antibacterial nanocapsules assembled in virus-like particles, their stability and their interaction with mammal and antimicrobial model membranes. We use Molecular Dynamics with force-fields of different granularity and protein design strategies to study the stability, self-assembly and membrane poration properties of these nanocapsules.

Antimicrobial Peptides and Proteins: From Nature's Reservoir to the Laboratory and Beyond

Rapid rise of antimicrobial resistance against conventional antimicrobials, resurgence of multidrug resistant microbes and the slowdown in the development of new classes of antimicrobials, necessitates the urgent development of alternate classes of therapeutic molecules. Antimicrobial peptides (AMPs) are small proteins present in different lifeforms in nature that provide defense against microbial infections. They have been effective components of the host defense system for a very long time. The fact that the development of resistance by the microbes against the AMPs is relatively slower or delayed compared to that against the conventional antibiotics, makes them prospective alternative therapeutics of the future. Several thousands of AMPs have been isolated from various natural sources like microorganisms, plants, insects, crustaceans, animals, humans, etc. to date. However, only a few of them have been translated commercially to the market so far. This is because of some inherent drawbacks of the naturally obtained AMPs like 1) short half-life owing to the susceptibility to protease degradation, 2) inactivity at physiological salt concentrations, 3) cytotoxicity to host cells, 4) lack of appropriate strategies for sustained and targeted delivery of the AMPs. This has led to a surge of interest in the development of synthetic AMPs which would retain or improve the antimicrobial potency along with circumventing the disadvantages of the natural analogs. The development of synthetic AMPs is inspired by natural designs and sequences and strengthened by the fusion with various synthetic elements. Generation of the synthetic designs are based on various strategies like sequence truncation, mutation, cyclization and introduction of unnatural amino acids and synthons. In this review, we have described some of the AMPs isolated from the vast repertoire of natural sources, and subsequently described the various synthetic designs that have been developed based on the templates of natural AMPs or from de novo design to make commercially viable therapeutics of the future. This review entails the journey of the AMPs from their natural sources to the laboratory.

Evaluating the effects of hydrophobic and cationic residues on antimicrobial peptide self-assembly

Antimicrobial peptides typically contain hydrophobic and cationic residues, which allow them to interact with microbial cells and induce cell death. In a previous study, we found that the hydrophobic and cationic residues could also help antimicrobial peptides self-assemble into hydrogels, and this could be used as a novel approach for the preparation of hydrogel wound dressings. Therefore, in this work, four PAF26 peptide derivatives with different hydrophobic and cationic residues were used to study the effects of hydrophobic and cationic residues on self-assembly behaviours. It was found that all the PAF26 peptide derivatives could self-assemble into hydrogels, but the storage moduli, microscopic structures, secondary structure transformations, and antimicrobial abilities varied. In particular, peptides with a greater number of hydrophobic and cationic residues tended to undergo an unordered coil transformation and form bent nanofibers, while peptides with a lower number of hydrophobic and cationic residues tended to undergo β-sheet transformation and form straight nanofibers. In addition, antimicrobial experiments demonstrated that a strong crosslinked structure may have negative effects on the antimicrobial activity.

Pathway-Dependent Preferential Selection and Amplification of Variable Self-Assembled Peptide Nanostructures and Their Biological Activities

We demonstrate the formation of diverse peptide nanostructures, which are "out of equilibrium" based on a single dipeptide gelator. These structures represent the differential energy states of the free energy landscape, which are accessed by differential energy inputs provided by variable self-assembly pathways, that is, heat-cool method or ultrasonication. A higher energy input by the heat-cool method created a thermodynamically favored long entangled nanofibrillar network, while twisted ribbonlike structures were prevalent by ultrasonication. Interestingly, the nanofibrillar network representing the global thermodynamic minima could be accessed by simply melting the kinetically trapped structures as indicated by the thermoreversibility studies. The impact on the material strength was remarkable; gels with an order of magnitude difference in mechanical properties could be fabricated by simply modulating the self-assembly pathways. Interestingly, the thermodynamically favored nanofibrous network promoted cellular adhesion and survival, while a significant number of cells fail to adhere on the kinetically trapped twisted ribbons. Thus, nonequilibrium nanostructures open up new directions to develop advanced functional materials with diverse functions.