Development of miniaturized fluorimetric device for caffeine determination using a smartphone

Modular 3D-printed fluorometer/photometer for determination of iron(ii), caffeine, and ciprofloxacin in pharmaceutical samples

The demand for the development of portable and low-cost analytical devices has encouraged studies employing additive manufacturing techniques, such as 3D-printing. This method can be used to produce components such as printed electrodes, photometers, and fluorometers for low-cost systems that provide advantages including low sample volume, reduced chemical waste, and easy coupling with LED-based optics and other instrumental devices. In the present work, a modular 3D-printed fluorometer/photometer was designed and applied for the determination of caffeine (CAF), ciprofloxacin (CIP), and Fe(ii) in pharmaceutical samples. All the plastic parts were printed separately by a 3D printer, using Tritan as the plastic material (black color). The final size of the modular 3D-printed device was 12 × 8 cm. The radiation sources were light-emitting diodes (LEDs), while a light dependent resistor (LDR) was used as a photodetector. The analytical curves obtained for the device were: y = 3.00 × 10^-4 [CAF] + 1.00 and R ² = 0.987 for caffeine; y = 6.90 × 10^-3 [CIP] - 3.39 × 10^-2 and R ² = 0.991 for ciprofloxacin; and y = 1.12 × 10^-1 [Fe(ii)] + 1.26 × 10^-2 and R ² = 0.998 for iron(ii). The results obtained using the developed device were compared with reference methods, with no statistically significant differences observed. The 3D-printed device was composed of moveable parts, providing flexibility for adaptation and application as a photometer or fluorometer, by only switching the photodetector position. The LED could also be easily switched, permitting application of the device for different purposes. The cost of the device, including the printing and electronic components, was lower than US$10. The use of 3D-printing enables the development of portable instruments for use in remote locations with a lack of research resources.

Multifunctional Portable System Based on Digital Images for In-Situ Detecting of Environmental and Food Samples

The development of a portable device created by 3D printing for colorimetric and fluorometric measurements is an efficient tool for analytical applications in situ or in the laboratory presenting a wide field of applications in the environmental and food field. This device uses a light-emitting diode (LED) as radiation source and a webcam as a detector. Digital images obtained by the interaction between the radiation source and the sample were analyzed using a programming language developed in Matlab (Mathworks Inc., Natick, MA, USA), which builds the calibration curves in real-time using the RGB colour model. In addition, the entire system is connected to a notebook which serves as an LED and detector power supply without the need for any additional power source. The proposed device was used for the determination in situ of norfloxacin, allura red, and quinine in water and beverages samples, respectively. For the validation of the developed system, the results obtained were compared with a conventional spectrophotometer and spectrofluorometer respectively with a t-test at a 95% confidence level, which provides satisfactory precision and accuracy values.

Determination of caffeine in dietary supplements by miniaturized portable liquid chromatography

In this study three miniaturized liquid chromatography (LC) instruments have been evaluated and compared for the analysis of caffeine in dietary supplements, namely a benchtop capillary LC (capLC) system, a benchtop nano LC (nanoLC)system and a portable LC system. Commercial products derived from different sources of caffeine have been analyzed. Under optimized conditions, the methods based on benchtop systems were superior in terms of sensitivity. The limits of detection (LODs) found with the capLC and nanoLC systems were 0.01 and 0.003 µg mL^-1, respectively, whereas the LOD obtained with the portable LC instrument was of 1 µg mL^-1. The portable LC-based method was superior in terms of simplicity and throughput (total analysis time < 15 min). On the basis of the results obtained, a new method for the rapid measurement of caffeine in dietary supplements by portable miniaturized LC is presented. This method provided good linearity within the 1-20 µg mL^-1 interval, and it allowed the quantification of caffeine even in products derived from decaffeinated green coffee extracts. The contents of caffeine found with the proposed portable LC method in the real samples analyzed ranged from 1.38 to 7 mg per gram of product, which were values statistically equivalent to those found with the benchtop capLC and nanoLC methods, being the precision, expressed as relative standard deviation (RDS), of 2 -14% (n = 3). The proposed portable LC based method can be used as a simple and rapid alternative to estimate the quality, effectiveness and safety of dietary supplements, regarding their caffeine content.

5-[(Pyren-9-ylmethyl)amino]isophthalic acid with nitrogen containing heterocycles: stacking, N–H⋯π interactions and photoluminescence

Synthons guided the types of N–H⋯π interactions and stacking to cause quenching of emissions.