Enhancing the adsorption capability of areca leaf biochar for methylene blue by K2FeO4-catalyzed oxidative pyrolysis at low temperature

Production of non-activated biochar based on Biden pilosa and its application in removing methylene blue from aqueous solutions

Biden pilosa (BP) is a type of weed commonly found in Thailand that needs to be removed from agricultural areas for protecting main crops. This research proposed a method to reduce BP by using BP as a feedstock for biochar production. Non-activated BP biochar from fresh BP was produced in pilot scale using a drum kiln with a heat-transferring duct at a pyrolysis temperature of 550 °C at a slow heating rate. The physical properties of the non-activated BP biochar were investigated using scanning electron microscopy, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction, and a surface area analyzer. A batch experiment was used to study the adsorption behavior of methylene blue (MB) on BP biochar. The microstructure study of the BP biochar indicated that it has a cell structure similar to that of BP, which shows the non-destructive nature of the proposed technique for BP production. Six dominant peaks at 3283, 2915, 1559, 1403, 1116, and 863/839 cm^⁻1 were observed in the FTIR spectrum. The BP biochar exhibited a surface area of 5.21 m²/g and a pore size of 8 nm. The adsorption of MB on the BP biochar followed the Langmuir adsorption isotherm and pseudo-second-order kinetics. The Langmuir-based maximum adsorption capacity of MB on the BP biochar was 200 mg/g at 303 K.

Synergistic effect of hydrogen bonding and π-π interaction for enhanced adsorption of rhodamine B from water using corn straw biochar

Dyes adsorption to biochar via hydrogen bonding, and π-π interaction alone have attracted much research attention, however, their synergism in adsorption mechanisms remains largely unnoticed. The synergistic effects of the hydrogen bonding and π-π interaction might improve the adsorption capacity and need more understanding to prepare high-capacity biochar. In this work, we evaluated the adsorption of various dyes on biochar prepared via the activation of potassium bicarbonate and urea (named BC-KN) to explore their synergistic effects. Batch experiments indicated the BC-KN showed a high adsorption capacity to rhodamine B at 4839.0 mg/g, azure B at 4477.7 mg/g, and methylene blue at 2223.0 mg/g, respectively. The mechanism of such significant adsorption was investigated by their comparative experiments, characterizations, and computational analyses. The computational analyses suggested that the synergism of the hydrogen bonding and π-π interaction improves the adsorption energies of BC-KN/RhB system from -10.35 kcal/mol to -20.49 kcal/mol. It can be concluded that the hydrogen bonding and π-π interaction can synergize to significantly improve the adsorption by increasing the π-electron density and shortening the distance of aromatic rings, thus dyes with H-donor show significantly better adsorption capacities. The insight of hydrogen bonding being the governing factor in the synergistic system will help produce high-capacity biochar in removing aromatic dyes and suggest a sustainable technology for the efficient decolorization of dye effluent to minimize its damage to the health and environment.

Simultaneous adsorption of As(III) and Pb(II) by the iron-sulfur codoped biochar composite: Competitive and synergistic effects

Simultaneous elimination of As(III) and Pb(II) from wastewater is still a great challenge. In this work, an iron-sulfur codoped biochar (Fe/S-BC) was successfully fabricated in a simplified way and was applied to the remediate the co-pollution of As(III) and Pb(II). The positive enthalpy indicated that the adsorption in As-Pb co-pollution was an endothermic reaction. The mechanism of As(III) removal could be illustrated by surface complexation, oxidation and precipitation. In addition to precipitation and complexation, the elimination mechanism of Pb(II) also contained ion exchange and electrostatic interactions. Competitive and synergistic effects existed simultaneously in the co-contamination system. The suppression of As(III) was ascribed to competitive complexation of the two metals on Fe/S-BC, while the synergy of Pb(II) was attributed to the formation of the PbFe₂(AsO₄)₂(OH)₂. Batch experiments revealed that Fe/S-BC had outstanding ability to remove As(III) and Pb(II), regardless of pH dependency and interference by various coexisting ions. The maximum adsorption capacities of the Fe/S-BC for As(III) and Pb(II) were 91.2 mg/g and 631.7 mg/g, respectively. Fe/S-BC could be treated as a novel candidate for the elimination of As(III)-Pb(II) combined pollution.

A Review of the Removal of Dyestuffs from Effluents onto Biochar

The study provides a review of various applications of biomass-derived biochars, waste-derived biochars, and modified biochars as adsorbent materials for removing dyestuff from process effluents. Processing significant amounts of dye effluent discharges into receiving waters can supply major benefits to countries which are affected by the water crisis and anticipated future stress in many areas in the world. When compared to most conventional adsorbents, biochars can provide an economically attractive solution. In comparison to many other textile effluent treatment processes, adsorption technology provides an economic, easily managed, and highly effective treatment option. Several tabulated data values are provided that summarize the main characteristics of various biochar adsorbents according to their ability to remove dyestuffs from wastewaters.

Preparation of magnesium Ferrite-Doped magnetic biochar using potassium ferrate and seawater mineral at low temperature for removal of cationic pollutants

Magnetic biochar has captured a great interest for remediation of environment as an easily separable carbonous adsorbent. Herein, a highly adsorptive magnetic biochar was manufactured through seawater mineral and K₂FeO₄ co-promoted pyrolysis of jackfruit peel at 300 °C for removal of different cationic pollutants, and characterized by element analysis, FTIR, SEM-EDS, XRD, XPS and so on. MgFe₂O₄ was generated without external base and a 19.42 emu/g saturation magnetization was achieved. Simultaneously, iron oxides and oxygen containing groups were introduced. The magnetic biochar exhibited 61.30 mg/g, 129.61 mg/g, and 1238.30 mg/g adsorption capacities for Cu²⁺, methylene blue (MB), and malachite green (MG) at 25 °C, respectively, and remarkably surpassed the corresponding pristine biochar. The adsorption of MB and MG was mainly realized by electrostatic interaction, hydrogen bonding, complexation, and π-π electron-donor-acceptor interaction, and that of Cu²⁺ was attributed to electrostatic interaction, hydrogen bonding, and complexation.

How the Carbonization Time of Sugarcane Biomass Affects the Microstructure of Biochar and the Adsorption Process?

Biochars (BCs) are very versatile adsorbents, mainly, in the effectiveness of adsorption of organic and inorganic compounds in aqueous solutions. Here, the sugarcane biomass (SCB) was used to produce biochar at different carbonization times: 1, 2, 3, 4, and 5 h, denominated as BC1, BC2, BC3, BC4, and BC5, respectively. The superficial reactivity was studied with adsorption equilibrium experiments and kinetics models; Methylene Blue (MB) was used as adsorbate at different pH values, concentrations, and temperatures. In summary, the carbonization time provides the increase of superficial area, with exception of BC4, which decreased. Equilibrium studies showed inflection points and fluctuations with different initial dye concentration and temperature; SCB showed the best adsorption capacity compared to the BCs at the three temperatures tested, varying with the increase of MB concentration, suggesting the dependence of these two main factors on the adsorption process. The proposed adsorption mechanism suggests the major influence of Coulomb interactions, H-bonding, and π-interactions on the adsorption of MB onto adsorbents, evidencing that the adsorption is led by physical adsorption. Therefore, the results led to the use of the SCB without carbonization at 200 °C, saving energy and more adsorbent mass, considering that the carbonization influences weight loss. This study has provided insights of the use of SCB in MB dye adsorption as a low-cost and eco-friendly adsorbent.