A microbial fuel cell configured for the remediation of recalcitrant pollutants in soil environment

Bio-electrical stimulation process on degradation of Phenanthrene from aqueous solution using a novel anode modified with carbon cloth: Operational performance, microbial activity and energy

Phenanthrene as the hazardous PAHs-component are extensively detected in industrial wastewater. However, the impacts of bioelectrostimulation process on Phenanthrene degradation in aerobic reactors remained unclear. Here, a novel bioelectrostimulation process equipped with carbon cloth as electrodes was developed to investigate the removal efficiency of Phenanthrene and ATPase enzyme activity in the synthetic wastewater. The results obtained from the present study indicated that a complete Phenanthrene degradation (100%) can be achieved using microbial electrostimulation systems steel mesh coated with carbon cloth (MES-CC) as anode under optimal operational conditions (electrical current: 4 mA, HA concentration: 15 mg L^-1) within 18 h. The conductive carbon cloth provides a biofilm carrier to easily transfer the electrons between electrodes and microbial communities. In addition, the highest ATPase enzyme activity (5176 U) was observed when the aerobic MES-CC reactors were operated with electrical current 4 mA. Furthermore, the COD removal efficiency in MES-CC increased from 49% to 96% when the C: N ratio decreased from 20 to 5. The highest value of V_max in MES-CC for suspended and attached growth were determined to be 2.87 and 0.54 g COD g^-1 biomass. Overall, the results demonstrated that MES equipped with carbon cloth and continuous electrical current mode has good potential for efficient Phenanthrene wastewater treatment.

Degradation of pyrene using single-chamber air-cathode microbial fuel cells: Electrochemical parameters and bacterial community changes

Pyrene, a typical four-ring polycyclic aromatic hydrocarbon, is abundantly present in the environment and is potentially harmful to the human body. In this study, single-chamber air-cathode microbial fuel cells (MFCs) were used to treat pyrene, and the ensuing degradation, electrical parameters, and microbial changes were analyzed. The results showed that MFCs could degrade pyrene, and the maximum degradation rate for 30 mg/L reached 88.1 ± 5.4%. The addition of pyrene reduced the electrical performance of the MFCs and suppressed the power output. Analysis of the anodic microbial community showed that the proportion of Alcaligenes and Stenotrophomonas increased with an increase in pyrene concentration, which may explain the high degradation rate of pyrene.

Anaerobic-petroleum degrading bacteria: Diversity and biotechnological applications for improving coastal soil

Due to the industrial emissions and accidental spills, the critical material for modern industrial society petroleum pollution causes severe ecological damage. The prosperous oil exploitation and transportation causes the recalcitrant, hazardous, and carcinogenic sludge widespread in the coastal wetlands. The costly physicochemical-based remediation remains the secondary and inadequate treatment for the derivatives along with the tailings. Anaerobic microbial petroleum degrading biotechnology has received extensive attention for its cost acceptable, eco-friendly, and fewer health hazards. As a result of the advances in biotechnology and microbiology, the anaerobic oil-degrading bacteria have been well developing to achieve the same remediation effects with lower operating costs. This review summarizes the advantages and potential scenarios of the anaerobic degrading bacteria, such as sulfate-reducing bacteria, denitrifying bacteria, and metal-reducing bacteria in the coastal area decomposing the alkanes, alkenes, aromatic hydrocarbons, polycyclic aromatic, and related derivatives. In the future, a complete theoretical basis of microbiological biotechnology, molecular biology, and electrochemistry is necessary to make efficient and environmental-friendly use of anaerobic degradation bacteria to mineralize oil sludge organic wastes.

Microorganisms in sediment microbial fuel cells: Ecological niche, microbial response, and environmental function

A sediment microbial fuel cell (SMFC) is a device that harvests electrical energy from sediments rich in organic matter. SMFCs have been attracting increasing amounts of interest in environmental remediation, since they are capable of providing a clean and inexhaustible source of electron donors or acceptors and can be easily controlled by adjusting the electrochemical parameters. The microorganisms inhabiting sediments and the overlying water play a pivotal role in SMFCs. Since the SMFC is applied in an open environment rather than in an enclosed chamber, the effects of the environment on the microbes should be intense and the microbial community succession should be extremely complex. Thus, this review aims to provide an overview of the microorganisms in SMFCs, which few previous review papers have reported. In this study, the anodic and cathodic niches for the microorganisms in SMFCs are summarized, how the microbial population and community interact with the SMFC environment is discussed, a new microbial succession strategy called the electrode stimulation succession is proposed, and recent developments in the environmental functions of SMFCs are discussed from the perspective of microorganisms. Future studies are needed to investigate the electrode stimulation succession, the environmental function and the electron transfer mechanism in order to boost the application of SMFCs for power generation and environmental remediation.

Advanced microbial fuel cell for waste water treatment-a review

Petroleum, coal, and natural gas reservoir were depleting continuously due to an increase in industrialization, which enforced study to identify alternative sources. The next option is the renewable resources which are most important for energy purpose coupled with environmental problem reduction. Microbial fuel cells (MFCs) have become a promising approach to generate cleaner and more sustainable electrical energy. The involvement of various disciplines had been contributing to enhancing the performance of the MFCs. This review covers the performance of MFC along with different wastewater as a substrate in terms of treatment efficiencies as well as for energy generation. Apart from this, effect of various parameters and use of different nanomaterials for performance of MFC were also studied. From the current study, it proves that the use of microbial fuel cell along with the use of nanomaterials could be the waste and energy-related problem-solving approach. MFC could be better in performances based on optimized process parameters for handling any wastewater from industrial process.

Review on the production of medium and small chain fatty acids through waste valorization and CO2 fixation

The developing approaches in the recovery of resources from biowastes for the production of renewable value-added products and fuels, using microbial cultures as bio-catalyst have now became promising aspect. In the path of anaerobic digestion, the microorganisms are assisting transformation of a complex organic feedstock/waste to biomass and biogas. This potentiality consequently leads to the production of intermediate precursors of renewable value-added products. Particularly, a set of anaerobic pathways in the fermentation process, yields small-chain fatty acids (SCFA), and medium-chain fatty acids (MCFA) via chain elongation pathways from waste valorization and CO₂ fixation. This review focuses on the production of SCFA and MCFA from CO₂, synthetic substrates and waste materials. Moreover, the review introduces the metabolic engineering of Escherichia coli and Saccharomyces cerevisiae for SCFAs/MCFAs production. Furtherly, it concludes that future critical research might target progress of this promising approach as a valorization of complex organic wastes.

Sewage enhanced bioelectrochemical degradation of petroleum hydrocarbons in soil environment through bioelectro-stimulation

•

Acetate and sewage were evaluated for enhanced hydrocarbons degradation in soil bioelectrochemical systems.

•

Sewage has superior function in improving in situ bioelectrochemical degradation.

•

Both acetate and sewage improved power density, substrate and sulfate removal.

•

Soil contaminated with produced water was remediated by more than 70 %.

The impact of readily biodegradable substrates (sewage and acetate) in bioelectroremediation of hydrocarbons (PW) was evaluated in a bench-scale soil-based hybrid bioelectrochemical system. Addition of bioelectro-stimulants evidenced efficient degradation than control operation. Acetate and sewage were exhibited power density of 1126 mW/m² and 1145 mW/m², respectively, which is almost 15 % higher than control (without stimulant, 974 mW/m²). Increased electrochemical activity was correlated well with total petroleum hydrocarbons (TPH) degradation through addition of acetate (TPH_R, 525 mg/L, 67.4 %) and sewage (TPH_R, 560 mg/L,71.8 %) compared to the control operation (TPH_R, 503 mg/L, 64.5 %). Similarly, chemical oxygen demand (COD) reduction was also enhanced from 69.0 % (control) to 72.1 % and 74.6 % with acetate and sewage, respectively. Sewage and acetate also showed a positive role in sulfates removal, which enhanced from 56.0 % (control) to 62.9 % (acetate) and 72.6 % (sewage). This study signifies the superior function of sewage as biostimulant compared to acetate for the bioelectroremediation of hydrocarbons in contaminated soils.