Detecting and identifying reversible changes in perovskite solar cells by electrochemical impedance spectroscopy

In Situ and Operando Characterizations of Metal Halide Perovskite and Solar Cells: Insights from Lab-Sized Devices to Upscaling Processes

The performance and stability of metal halide perovskite solar cells strongly depend on precursor materials and deposition methods adopted during the perovskite layer preparation. There are often a number of different formation pathways available when preparing perovskite films. Since the precise pathway and intermediary mechanisms affect the resulting properties of the cells, in situ studies have been conducted to unravel the mechanisms involved in the formation and evolution of perovskite phases. These studies contributed to the development of procedures to improve the structural, morphological, and optoelectronic properties of the films and to move beyond spin-coating, with the use of scalable techniques. To explore the performance and degradation of devices, operando studies have been conducted on solar cells subjected to normal operating conditions, or stressed with humidity, high temperatures, and light radiation. This review presents an update of studies conducted in situ using a wide range of structural, imaging, and spectroscopic techniques, involving the formation/degradation of halide perovskites. Operando studies are also addressed, emphasizing the latest degradation results for perovskite solar cells. These works demonstrate the importance of in situ and operando studies to achieve the level of stability required for scale-up and consequent commercial deployment of these cells.

Impedance Spectroscopy of Metal Halide Perovskite Solar Cells from the Perspective of Equivalent Circuits

Impedance spectroscopy (IS) provides a detailed understanding of the dynamic phenomena underlying the operation of photovoltaic and optoelectronic devices. Here we provide a broad summary of the application of IS to metal halide perovskite materials, solar cells, electrooptic and memory devices. IS has been widely used to characterize perovskite solar cells, but the variability of samples and the presence of coupled ionic-electronic effects form a complex problem that has not been fully solved yet. We summarize the understanding that has been obtained so far, the basic methods and models, as well as the challenging points still present in this research field. Our approach emphasizes the importance of the equivalent circuit for monitoring the parameters that describe the response and providing a physical interpretation. We discuss the possibilities of models from the general perspective of solar cell behavior, and we describe the specific aspects and properties of the metal halide perovskites. We analyze the impact of the ionic effects and the memory effects, and we describe the combination of light-modulated techniques such as intensity modulated photocurrent spectroscopy (IMPS) for obtaining more detailed information in complex cases. The transformation of the frequency to time domain is discussed for the consistent interpretation of time transient techniques and the prediction of features of current-voltage hysteresis. We discuss in detail the stability issues and the occurrence of transformations of the sample coupled to the measurements.

DC bias electric field effects on ac electrical conductivity of MAPbI3suggesting intrinsic changes on structure and charge carrier dynamics

Methylammonium lead iodide (MAPbI₃) emerges as a promising halide perovskite material for the next generation of solar cells due to its high efficiency and flexibility in material growth. Despite intensive studies of their optical and electronic properties in the past ten years, there are no reports on dc bias electric field effects on conductivity in a wide temperature range. In this work, we report the combined effects of frequency, temperature, and dc bias electric field on the ac conductivity of MAPbI₃. We found that the results of dc bias electric fields are very contrasting in the tetragonal and cubic phases. In the tetragonal phase, sufficiently high dc bias electric fields induce a conductivity peak appearance ∼290 K well evidenced at frequencies higher than 100 kHz. Excluding possible degradation and extrinsic factors, we propose that this peak suggests a ferroelectric-like transition. In the absence of a dc bias electric field, the ac conductivity in the tetragonal phase increases with temperature while decreases with temperature in the cubic phase. Also, ac activation energies for tetragonal and cubic phases were found to be inversely and directly proportional to the dc bias electric field, respectively. This behavior was attributed to the ionic conduction, possibly of MA⁺and I^-ions, for the tetragonal phase. As for the cubic phase, the ac conduction dynamics appear to be metallic-like, which seems to change to a polaronic-controlled charge transport to increased dc bias electric fields.

Consequence of aging at Au/HTM/perovskite interface in triple cation 3D and 2D/3D hybrid perovskite solar cells

Perovskite solar cells (PSCs) expressed great potentials for offering a feasible alternative to conventional photovoltaic technologies. 2D/3D hybrid PSCs, where a 2D capping layer is used over the 3D film to avoid the instability issues associated with perovskite film, have been reported with improved stabilities and high power conversion efficiencies (PCE). However, the profound analysis of the PSCs with prolonged operational lifetime still needs to be described further. Heading towards efficient and long-life PSCs, in-depth insight into the complicated degradation processes and charge dynamics occurring at PSCs' interfaces is vital. In particular, the Au/HTM/perovskite interface got a substantial consideration due to the quest for better charge transfer; and this interface is debatably the trickiest to explain and analyze. In this study, multiple characterization techniques were put together to understand thoroughly the processes that occur at the Au/HTM/perovskite interface. Inquest analysis using current-voltage (I-V), electric field induced second harmonic generation (EFISHG), and impedance spectroscopy (IS) was performed. These techniques showed that the degradation at the Au/HTM/perovskite interface significantly contribute to the increase of charge accumulation and change in impedance value of the PSCs, hence resulting in efficiency fading. The 3D and 2D/3D hybrid cells, with PCEs of 18.87% and 20.21%, respectively, were used in this study, and the analysis was performed over the aging time of 5000 h. Our findings propose that the Au/HTM/perovskite interface engineering is exclusively essential for attaining a reliable performance of the PSCs and provides a new perspective towards the stability enhancement for the perovskite-based future emerging photovoltaic technology.

Long-Term Stability Analysis of 3D and 2D/3D Hybrid Perovskite Solar Cells Using Electrochemical Impedance Spectroscopy

Despite the remarkable progress in perovskite solar cells (PSCs), their instability and rapid degradation over time still restrict their commercialization. A 2D capping layer has been proved to overcome the stability issues; however, an in-depth understanding of the complex degradation processes over a prolonged time at PSC interfaces is crucial for improving their stability. In the current work, we investigated the stability of a triple cation 3D ([(FA0.83MA0.17)Cs0.05]Pb(I0.83Br0.17)3) and 2D/3D PSC fabricated by a layer-by-layer deposition technique (PEAI-based 2D layer over triple cation 3D perovskite) using a state-of-art characterization technique: electrochemical impedance spectroscopy (EIS). A long-term stability test over 24 months was performed on the 3D and 2D/3D PSCs with an initial PCE of 18.87% and 20.21%, respectively, to suggest a more practical scenario. The current-voltage (J-V) and EIS results showed degradation in both the solar cell types; however, a slower degradation rate was observed in 2D/3D PSCs. Finally, the quantitative analysis of the key EIS parameters affected by the degradation in 3D and 2D/3D PSCs were discussed.

Beyond Impedance Spectroscopy of Perovskite Solar Cells: Insights from the Spectral Correlation of the Electrooptical Frequency Techniques

Small perturbation techniques have proven to be useful tools for the investigation of perovskite solar cells. A correct interpretation of the spectra given by impedance spectroscopy (IS), intensity-modulated photocurrent spectroscopy (IMPS), and intensity-modulated photovoltage spectroscopy (IMVS) is key for the understanding of device operation. The utilization of a correct equivalent circuit to extract real parameters is essential to make this good interpretation. In this work, we present an equivalent circuit, which is able to reproduce the general and the exotic behaviors found in impedance spectra. From the measurements, we demonstrate that the midfrequency features that may appear to depend on the active layer thickness, and we also prove the spectral correlation of the three techniques that has been suggested theoretically.

Electrochemical Impedance Spectroscopy Analysis of Hole Transporting Material Free Mesoporous and Planar Perovskite Solar Cells

The future photovoltaic technologies based on perovskite materials are aimed to build low tech, truly economical, easily fabricated, broadly deployable, and trustworthy solar cells. Hole transport material (HTM) free perovskite solar cells (PSCs) are among the most likely architectures which hold a distinctive design and provide a simple way to produce large-area and cost-effective manufacture of PSCs. Notably, in the monolithic scheme of the HTM-free PSCs, all layers can be printed using highly reproducible and morphology-controlled methods, and this design has successfully been demonstrated for industrial-scale fabrication. In this review article, we comprehensively describe the recent advancements in the different types of mesoporous (nanostructured) and planar HTM-free PSCs. In addition, the effect of various nanostructures and mesoporous layers on their performance is discussed using the electrochemical impedance spectroscopy (EIS) technique. We bring together the different perspectives that researchers have developed to interpret and analyze the EIS data of the HTM-free PSCs. Their analysis using the EIS tool, the limitations of these studies, and the future work directions to overcome these limitations to enhance the performance of HTM-free PSCs are comprehensively considered.