Determination of microcystins in water samples by deep eutectic solvent-based vortex-assisted liquid–liquid microextraction coupled with ultrahigh-performance liquid chromatography-high resolution mass spectrometry

A solid-phase fluorescence sensor for measuring chemical species in water

In this study, the first of its kind, a solid-phase fluorescence sensing platform was developed to quantify contaminants in water. ZnO quantum dots (QDs) were combined with molecularly imprinted polymers (MIPs) to form fluorescence sensing materials. Solid sensing layers were formed via a straightforward spin-coating method, which demonstrated a strong attachment to the sensor substrate while maintaining the integrity of the sensing materials. The developed sensing platform comprised a portable fluorescence detector to measure fluorescence intensity, instead of traditional fluorescence spectroscopy. The solid sensing platform was first tested with 2,4-dichlorophenoxyacetic acid (2,4-D), demonstrating high sensitivity (0.0233) and a very strong correlation (0.98) between the target molecule concentration and sensor signal. Further, the sensing platform was successfully adapted to measure a substance with a different molecular mass and chemical structure, the algae toxin microcystin-LR (MCLR); this demonstrated the sensor's versatility in quantifying target molecules. Tap water samples spiked with MCLR were also used to test the sensor's practical application. Finally, the working mechanism of the sensing platform was established, and the key information for using the sensor to measure various contaminants was determined. With its high performance, broad applicability, and ease of use, the developed platform provides a suitable basis for lab-on-chip image-based sensing devices for environmental monitoring.

High-voltage pulse-assisted extraction of flavonoids from kapok using deep eutectic solvent aqueous solutions

In this study, deep eutectic solvents coupled with a pulsed electric field (PEF-DES) were first applied to the extraction of traditional Chinese medicine plants. This study uses the PEF-DES extraction technique to extract TG-KF (Kapok flavonoid solution extracted with DES-TG). PEF-DES is a simple, effective and environmentally-friendly technology and can be used in industrial-scale production. For the optimal extraction conditions of TG-KF, DES-TG was used as a solvent, the DES-TG concentration was 50%, the solid-liquid ratio was 1 : 30, the electric field intensity was 0.55 kV cm-1, the number of pulses was 100, and the yield of flavonoids was 14.36 ± 0.35%. TG-KF has very good stability and there is no precipitation or discoloration within 6 months. The results of chicken embryo experiments and human patch tests show that 10% TG-KF aqueous solution has no irritation. DPPH experiments show that TG-KF has excellent efficacy as an antioxidant. Overall, TG-KF is expected to become a potential antioxidant raw material.

Application of Extraction and Determination Based on Deep Eutectic Solvents in Different Types of Environmental Samples

Water sources are an indispensable resource for human survival. Monitoring the pollution status of the surrounding environment is necessary to protect water sources. Research on the environmental matrix of deep eutectic solvents (DESs) has expanded rapidly because of their high extraction efficiency for various target analytes, controllable synthesis, and versatile structure. Following the synthesis of hydrophobic deep eutectic solvents (HDESs), their application in aqueous matrices broadened greatly. The present review conducted a survey on the pollutant extraction methods based DESs in environmental matrices from two aspects, application methods and matrix types; discussed the potential risk of DESs to the environment and future development trends; and provided some references for researchers to choose DES-based extraction methods for environmental research.

Determination of benzotriazole and benzothiazole derivatives in human urine by eco-friendly deep eutectic solvent-based ultrasound-assisted liquid-liquid microextraction followed by ultrahigh performance liquid chromatography quadrupole-time-of-flight mass spectrometry

Benzotriazole (BTRs) and benzothiazole (BTHs) derivatives have been classified as high production volume pollutants of emerging concern. The present work describes a rapid and simple process using an eco-friendly deep eutectic solvent (DES) based-ultrasound-assisted liquid-liquid microextraction (DES-UALLME) technique to effectively extract five BTRs and four BTHs in human urine samples, and then applying ultrahigh-performance liquid chromatography and electrospray ionization (+)-quadrupole time-of-flight mass spectrometry (UHPLC-ESI(+)-QTOF-MS) for their detection and quantification. DESs are a group of novel "green" solvents, and their applications in sample pretreatment are appropriate for the requirements for green chemistry, environmental protection and sustainable development. Furthermore, to overcome the challenges related to different experimental conditions, multivariate experimental design approaches conducted by means of a multilevel categorical design and a Box-Behnken Design were applied to screen and optimize parameters that have significant influences on the extraction efficiency of DES-UALLME. After optimization, the method was validated and shown to possess low limits of quantitation (LOQs; 0.4 - 9 ng mL^-1), high precision (3-12%), and high accuracy (mean spiked recoveries; 80-101%). The developed method was then successfully applied for the analysis of BTRs and BTHs in human urine samples. Interestingly, 5,6-dimethyl-1H-benzotriazole (XTR) was detected in almost all of the urine samples, which correlates with its high production and widely applications in industry processes and consumer products in Taiwan. These target analytes could potentially be used as biomarkers to assess exposure of BTRs and BTHs in biomonitoring programs and studies.

Selection of Covalent Organic Framework Pore Functionalities for Differential Adsorption of Microcystin Toxin Analogues

Microcystins (MCs), produced by Microcystis sp, are the most commonly detected cyanotoxins in freshwater, and due to their toxicity, worldwide distribution, and persistence in water, an improvement in the monitoring programs for their early detection and removal from water is necessary. To this end, we investigate the performance of three covalent organic frameworks (COFs), TpBD-(CF₃)₂, TpBD-(NO₂)₂, and TpBD-(NH₂)₂, for the adsorption of the most common and/or toxic MC derivatives, MC-LR, MC-RR, MC-LA, and MC-YR, from water. While MC-LR and MC-YR can be efficiently adsorbed using all three COF derivatives, high adsorption efficiencies were found for the most lipophilic toxin, MC-LA, with TpBD-(NH₂)₂, and the most hydrophilic one, MC-RR, with TpBD-(NO₂). Theoretical calculations revealed that MC-LA and MC-RR have a tendency to be located mainly on the COF surface, interacting through hydrogen bonds with the amino and nitro functional groups of TpBD-(NH₂)₂ and TpBD-(NO₂)₂, respectively. TpBD-(NO₂)₂ outperforms the adsorbent materials reported for the capture of MC-RR, resulting in an increase in the maximum adsorption capacity by one order of magnitude. TpBD-(NH₂)₂ is reported as the first efficient adsorbent material for the capture of MC-LA. Large differences in desorption efficiencies were observed for the MCs with different COFs, highlighting the importance of COF-adsorbate interactions in the material recovery. Herein we show that efficient capture of these toxins from water can be achieved through the proper selection of the COF material. More importantly, this study demonstrates that by careful choice of COF functionalities, specific compounds can be targeted or excluded from a group of analogues, providing insight into the design of more efficient and selective adsorbent materials.

Deep eutectic solvent-based ultrasound-assisted emulsification microextraction for the rapid determination of benzotriazole and benzothiazole derivatives in surface water samples

This work describes a simple and environmental-friendly method for the simultaneous determination of five benzotriazole derivatives (BTRs) and four benzothiazole derivatives (BTs) that are frequently found in surface water. The target analytes were efficiently extracted from water samples using a "green" deep eutectic solvent (DES) as the extraction solvent based- ultrasound-assisted emulsification microextraction (DES-USAEME), and their determination were performed by ultrahigh-performance liquid chromatography and electrospray ionization (+)-quadrupole time-of-flight mass spectrometry (UHPLC-ESI(+)-QToF-MS). The DES was composed of a mixture of choline chloride and phenol (molar ratio 1:2). The DES-USAEME factors were optimized by a Box-Behnken Design coupled response surface methodology. The developed method was validated, providing limits of quantitation (LOQs; 02 μg L^-1), high precisions (1-8%), and satisfactory mean spiked recoveries (72-104 %). Relatively high total concentrations of the target analytes were found in samples collected from a reservoir (47.2-101.3 μg L^-1), which may have been released from tire-wear particles and scrap tires from buses and old tires that were strung alongside the shuttle boats to prevent the boats from coming into contact with each other or from impacting against the dock during docking. This is the first study on the occurrence of BTRs and BTs in reservoir samples.

A Review of the Use of Eutectic Solvents, Terpenes and Terpenoids in Liquid–liquid Extraction Processes

Diverse and abundant applications of the eutectic solvents have appeared in the last years. Their promising tunable properties, eco-friendly character and the possibility of being prepared from numerous compounds have led to the publication of numerous papers addressing their use in different areas. Terpenes and terpenoids have been employed in the formulation of eutectic solvents, though they also have been applied as solvents in extraction processes. For their hydrophobic nature, renewable character, low environmental impact, cost and being non-hazardous, they have also been proposed as possible substitutes of conventional solvents in the separation of organic compounds from aqueous streams, similarly to hydrophobic eutectic solvents. The present work reviews the application of eutectic solvents in liquid–liquid extraction and terpenes and terpenoids in extraction processes. It has been made a research in the current state-of-the-art in these fields, describing the proposed applications of the solvents. It has been highlighted the scale-up feasibility, solvent regeneration and reuse procedures and the comparison of the performance of eutectic solvents, terpenes and terpenoids in extraction with conventional organic solvents or ionic liquids. Ultimately, it has been also discussed the employ of predictive methods in extraction, the reliability of thermodynamic models in correlation of liquid–liquid equilibria and simulation of liquid–liquid extraction processes.