Nickel oxide decorated MoS2nanosheet-based non-enzymatic sensor for the selective detection of glucose

3D-Structured Au(NiMo)/Ti Catalysts for the Electrooxidation of Glucose

In this study, 3D-structured NiMo coatings have been constructed via the widely used electrodeposition method on a Ti surface and decorated with very small Au crystallites by galvanic displacement (Au(NiMo)/Ti). The catalysts have been characterized using scanning electron microscopy, energy dispersive X-ray analysis, and inductively coupled plasma optical emission spectroscopy. Different Au(NiMo)/Ti catalysts, which had Au loadings of 1.8, 2.3, and 3.9 µgAu cm−2, were prepared. The electrocatalytic activity of the Au(NiMo)/Ti catalysts was examined with respect to the oxidation of glucose in alkaline media by cyclic voltammetry. It was found that the Au(NiMo)/Ti catalysts with Au loadings in the range of 1.8 up to 3.9 µgAu cm−2 had a higher activity compared to that of NiMo/Ti. A direct glucose-hydrogen peroxide (C6H12O6-H2O2) single fuel cell was constructed with the different Au-loading-containing Au(NiMo)/Ti catalysts as the anode and Pt as the cathode. The fuel cells exhibited an open circuit voltage of ca. 1.0 V and peak power densities up to 8.75 mW cm−2 at 25 °C. The highest specific peak power densities of 2.24 mW µgAu−1 at 25 °C were attained using the Au(NiMo)/Ti catalyst with the Au loading of 3.9 µg cm−2 as the anode.

Functionalization of 2D MoS2 Nanosheets with Various Metal and Metal Oxide Nanostructures: Their Properties and Application in Electrochemical Sensors

Two-dimensional transition metal dichalcogenides (2D TMDs) have gained considerable attention due to their distinctive properties and broad range of possible applications. One of the most widely studied transition metal dichalcogenides is molybdenum disulfide (MoS₂). The 2D MoS₂ nanosheets have unique and complementary properties to those of graphene, rendering them ideal electrode materials that could potentially lead to significant benefits in many electrochemical applications. These properties include tunable bandgaps, large surface areas, relatively high electron mobilities, and good optical and catalytic characteristics. Although the use of 2D MoS₂ nanosheets offers several advantages and excellent properties, surface functionalization of 2D MoS₂ is a potential route for further enhancing their properties and adding extra functionalities to the surface of the fabricated sensor. The functionalization of the material with various metal and metal oxide nanostructures has a significant impact on its overall electrochemical performance, improving various sensing parameters, such as selectivity, sensitivity, and stability. In this review, different methods of preparing 2D-layered MoS₂ nanomaterials, followed by different surface functionalization methods of these nanomaterials, are explored and discussed. Finally, the structure-properties relationship and electrochemical sensor applications over the last ten years are discussed. Emphasis is placed on the performance of 2D MoS₂ with respect to the performance of electrochemical sensors, thereby giving new insights into this unique material and providing a foundation for researchers of different disciplines who are interested in advancing the development of MoS₂-based sensors.

Assessing doping strategies for monolayer MoS2 towards non-enzymatic detection of cortisol: a first-principles study

In this work, we investigate by means of atomistic density functional theory simulations the interaction between cortisol (the target molecule) and monolayer MoS₂ (the substrate). The aim is to assess viable strategies for the non-enzymatic chemical sensing of cortisol. Metal doping of the sensing material could offer a way to improve the device response upon analyte adsorption, and could also enable novel and alternative detection mechanisms. For such reasons, we explore metal doping of MoS₂ with Ni, Pd, and Pt, as these are metal elements commonly used in experiments. Then, we study the material response from the structural, electronic, and charge-transfer points of view. Based on our results, we propose two possible sensing mechanisms and device architectures: (i) a field-effect transistor, and (ii) an electrochemical sensor. In the former, Ni-doped MoS₂ would act as the FET channel, and the sensing mechanism involves the variation of the surface electrostatic charge upon the adsorption of cortisol. In the latter, MoS₂ decorated with Pt nanoparticles could act as the working electrode, and the sensing mechanism would involve the reduction of cortisol. In addition, our findings may suggest the suitability of both doped and metal-doped MoS₂ as sensing layers in an optical sensor.

A hierarchical hollow Ni/Co-functionalized MoS2 architecture with highly sensitive non-enzymatic glucose sensing activity

A hierarchical hollow Ni/Co-codoped MoS2 architecture was successfully prepared using a Ni/Co Prussian Blue analogue as the precursor followed by the solvothermal-assisted insertion of MoS42- and extraction of [Co(CN)6]3- at 200 °C for 32 h. The obtained Ni/Co-codoped MoS2 composite exhibited a hollow microcubic structural characteristic, and the morphology, structure, and chemical compositions were carefully characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS), respectively. The Ni/Co-codoped MoS2 composite used as an electrode material featured excellent glucose sensing activity and a high sensitivity of 2546 μA mM-1 cm-2 with a relatively low detection limit of 0.69 μM (S/N = 3). In addition, the Ni/Co-codoped MoS2 composite showed good anti-interference sensing performance in the presence of ascorbic acid (AA), lysine (Lys), cysteine (Cys), urea, H2O2, KCl, and other interferents. These experimental results revealed that the composite is a promising electrode material for enzyme-free glucose sensing, and the feasible synthetic strategy may provide an effective and controlled route to prepare other multi-metal substituted sulfide-based hierarchical structures with high electrochemical sensing performance.

Representative 2D-material-based nanocomposites and their emerging applications: a review

Composites (or complex materials) are formed from two or many constituent materials with novel physical or chemical characteristics when integrated. The individual components can be combined to create a unique composite material through mechanical transfer, physical stacking, exfoliation, derivative chemical mixtures, mixtures of solid solutions, or complex synthesis processes. The development of new composites based on emerging 2D nanomaterials has allowed for outstanding achievements with novel applications that were previously unknown. These new composite materials show massive potential in emerging applications due to their exceptional properties, such as being strong, light, cheap, and highly photodegradable, and their ability to be used for water splitting and energy storage compared to traditional materials. The blend of existing polymers and 2D materials with their nanocomposites has proven to be immediate solutions to energy and food scarcity in the world. Although much literature has been reported in the said context, we tried to provide an understanding about the relationship of their mechanisms and scope for future application in a comprehensive way. In this review, we briefly summarize the basic characteristics, novel physical and chemical behaviors, and new applications in the industry of the emerging 2D-material-based composites.

Fabrication of 2D-MoSe2 incorporated NiO Nanorods modified electrode for selective detection of glucose in serum samples

Layered molybdenum diselenide (MoSe2) nanosheets were formed by the weak Van der Waals forces of attraction between Se and Mo atoms. MoSe2 has a larger space between the adjacent layers and smaller band gaps in the range of 0.85 to ~ 1.6 eV. In this study, MoSe2 nanosheets decorated nickel oxide (NiO) nanorods have been synthesized by hydrothermal method using sodium molybdate and selenium metal powder. NiO/MoSe2 composite formation was confirmed by powder X-ray diffraction analysis. In addition, the presence of MoSe2 nanosheets on NiO nanorods were confirmed by field emission scanning electron microscopy, high-resolution transmission electron microscopy and X-ray photoelectron spectroscopy. The Nyquist plots of NiO/MoSe2 coated glassy carbon electrode (GCE) was indicated that it had lower charge transfer resistance compared to NiO/GCE and MoSe2/GCE. Furthermore, as-prepared NiO/MoSe2/GCE was used to detect glucose in alkaline solution by cyclic voltammetry and amperometry techniques. The NiO/MoSe2/GCE was exhibited a linear response for the oxidation of glucose from 50 µM to 15.5 mM (R2 = 0.9842) at 0.5 V by amperometry. The sensor response time and the limit of detection were found to be 2 s and 0.6 µM for glucose. Moreover, selectivity of the NiO/MoSe2 sensor was tested in the presence of common interferent molecules such as hydrogen peroxide, fructose, lactose, ascorbic acid, uric acid, and dopamine. It was found that NiO/MoSe2/GCE did not respond to these interfering biomolecules. In addition, NiO/MoSe2/GCE had shown high stability, reproducibility and repeatability. Finally, the practical application of the sensor was demonstrated by detecting glucose in human blood serum with the acceptable recovery.

Simultaneous Detection of Glucose and Fructose in Synthetic Musts by Multivariate Analysis of Silica-Based Amperometric Sensor Signals

Silica-based electrodes which permanently include a graphite/Au nanoparticles composite were tested for non-enzymatic detection of glucose and fructose. The composite material showed an effective electrocatalytic activity, to achieve the oxidation of the two analytes at quite low potential values and with good linearity. Reduced surface passivation was observed even in presence of organic species normally constituting real samples. Electrochemical responses were systematically recorded in cyclic voltammetry and differential pulse voltammetry by analysing 99 solutions containing glucose and fructose at different concentration values. The analysed samples consisted both in glucose and fructose aqueous solutions at pH 12 and in solutions of synthetic musts of red grapes, to test the feasibility of the approach in a real frame. Multivariate exploratory analyses of the electrochemical signals were performed using the Principal Component Analysis (PCA). This gave evidence of the effectiveness of the chemometric approach to study the electrochemical sensor responses. Thanks to PCA, it was possible to highlight the different contributions of glucose and fructose to the voltammetric signal, allowing their selective determination.

Towards the development of flexible carbon nanotube–parafilm nanocomposites and their application as bioelectrodes

Soft, flexible and conductive interfaces, which can be used as electrode materials integrated with commercial electronic components and the human body for continuous monitoring of different analytes are in high demand in wearable electronics.

Preparation of hexagonal boron nitride doped graphene film modified sensor for selective electrochemical detection of nicotine in tobacco sample

The selective detection of nicotine is necessary in biological and biomedical samples to screen the patients who has the neurodegenerative diseases due to tobacco addiction. For this purpose, we have synthesized a hybrid binary composite made of 2D hexagonal boron nitride nanosheets (BN) doped graphene film via a scalable top-down technique for the electrochemical detection of nicotine. Transmission electron microscopy (TEM) images showed that layered graphene sheets bounded with BN nanosheets. Moreover, Fourier-transform infrared (FT-IR), UV-visible (UV-vis), and X-ray photoelectron spectroscopies (XPS) confirmed successful integration of BN within graphene. In addition, the electrical conductivity of the nanocomposite was tested using electrochemical impedance spectroscopy (EIS), which showed high electrical conductivity of BN/graphene coated electrode with low charge transfer resistance. To develop a selective nicotine sensor, glassy carbon electrode (GCE) surface was coated with BN/graphene hybrid film and tested its electro-catalytic activity against nicotine. It was found that BN/graphene/GCE based sensor exhibited excellent electro-catalytic activity for nicotine oxidation at lower potential of +0.97 V in phosphate buffer solution (PBS, pH 7.0) and the linear response was observed from 1 to 1000 μM. The limit of detection (LOD) was estimated as 0.42 μM. The common interferent compounds such as uric acid (UA), paracetamol (PA), glucose (Glu), melamine (Mel), cysteine (Cys) and dopamine (DA) did not interfere on the sensor selectivity. Furthermore, BN/graphene/GCE exhibited high stability and reproducibility. Finally, BN/graphene/GCE-based sensor was successfully applied to detect nicotine in a tobacco sample with high recovery.

Design of a new electrochemical sensing system based on MoS2–TiO2/reduced graphene oxide nanocomposite for the detection of paracetamol

Synthetic route for the MoS₂–TiO₂/rGO nanocomposite and the electrode reaction for paracetamol.