H2S detection at low temperatures by Cu2O/Fe2O3 heterostructure ordered array sensors

Cu2O/Co3O4 nanoarrays for rapid quantitative analysis of hydrogen sulfide in blood

2D heterostructure nanoarrays have emerged as a promising sensing material for rapid disease detection applications. In this study, a bio-H2S sensor based on Cu2O/Co3O4 nanoarrays was proposed, the controllable preparation of the nanoarrays being achieved by exploring the experimental parameters of the 2D electrodeposition in situ assembly process. The nanoarrays were designed as a multi-barrier system with strict periodicity and long-range order. Based on the interfacial conductance modulation and vulcanization reaction of Cu2O and Co3O4, the sensor exhibited superior sensitivity, selectivity, and stability to H2S in human blood. In addition, the sensor exhibited a reasonable response to 0.1 μmol L-1 Na2S solution, indicating that it had a low detection limit for practical applications. Moreover, first-principles calculations were performed to study changes in the heterointerface during the sensing process and the mechanism of rapid response of the sensor. This work demonstrated the reliability of Cu2O/Co3O4 nanoarrays applied in portable sensors for the rapid detection of bio-H2S.

Magnetic-Field-Enhanced H2S Sensitivity of Cu2O/NiO Heterostructure Ordered Nanoarrays

Magnetism is a promising external intervention for gas sensitivity based on a heterogeneous interfacial structure caused by the regulation of the heterogeneous interface conductivity and the surface oxygen adsorption. In this study, Cu₂O/NiO heterostructure-ordered nanoarrays were prepared with a two-dimensional (2D) electrodeposition in situ assembly method for H₂S gas detection at room temperature under the action of a magnetic field. The nanoarrays were multibarrier structures with a strictly periodic structure that was greater than hundreds of microns in size. The experimental data confirmed that the response of 50 ppm of H₂S based on the nanoarrays was improved by nearly 61% with a relatively weak magnetic field. Particularly at a low concentration (≤20 ppm), the effect of the magnetic field enhancement on the sensitivity was more obvious. We attributed the enhancement of the gas sensitivity with the magnetic field to the regulation of the Cu₂O-NiO interface conductance and the surface oxygen adsorption. This study demonstrated that a magnetic field could significantly enhance the gas sensitivity based on heterostructures. Results of this study provide an important reference for the application of magnetism in gas detection and the design of new gas-sensitive materials.

Sensing Properties of NiO Loaded SnO2 Nanoparticles—Specific Selectivity to H2S

NiO-loaded SnO2 powders were prepared involving two chemical procedures. The mesoporous SnO2 support was synthesized by a hydrothermal route using Brij 35 non-ionic surfactant as a template. The nickel loadings of 1 and 10 wt.%. NiO were deposited by the wet impregnation method. The H2S sensing properties of xNiO-(1-x)SnO2 (x = 0, 1, 10%) thick layers deposited onto commercial substrates have been investigated with respect to different potential interfering gases (NO2, CO, CO2, CH4, NH3 and SO2) over a wide range of operating temperatures and relative humidity specific for in-field conditions. Following the correlation of the sensing results with the morphological ones, 1wt.% NiO/SnO2 was selected for simultaneous electrical resistance and work function investigations. The purpose was to depict the sensing mechanism by splitting between specific changes over the electron affinity induced by the surface coverage with hydroxyl dipoles and over the band bending induced by the variable surface charge under H2S exposure. Thus, it was found that different gas-interaction partners are dependent upon the amount of H2S, mirrored through the threshold value of 5 ppm H2S, which from an applicative point of view, represents the lower limit of health effects, an eight-hour TWA.

A Review on Advanced Sensing Materials for Agricultural Gas Sensors

This work is a comprehensive review of sensing materials, which interact with several target gases pertinent to agricultural monitoring applications. Sensing materials which interact with carbon dioxide, water vapor (relative humidity), hydrogen sulfide, ethylene and ethanol are the focus of this work. Performance characteristics such as dynamic range, recovery time, operating temperature, long-term stability and method of deposition are discussed to determine the commercial viability of the sensing materials considered in this work. In addition to the sensing materials, deposition methods are considered to obtain the desired sensing material thickness based on the sensor's mechanism of operation. Various material classes including metal oxides, conductive polymers and carbon allotropes are included in this review. By implementing multiple sensing materials to detect a single target analyte, the issue of selectivity due to cross sensitivity can be mitigated. For this reason, where possible, it is desirable to utilize more than one sensing material to monitor a single target gas. Among those considered in this work, it is observed that PEDOT PSS/graphene and TiO2-coated g-C3N4 NS are best suited for CO2 detection, given their wide dynamic range and modest operating temperature. To monitor the presence of ethylene, BMIM-NTf2, SWCNTs and PtTiO2 offer a dynamic range most suitable for the application and require no active heating. Due to the wide dynamic range offered by SiO2/Si nanowires, this material is best suited for the detection of ethanol; a gas artificially introduced to prolong the shelf life of the harvested crop. Finally, among all other sensing materials investigated, it observed that both SWCNTs and CNTs/SnO2/CuO are most suitable for H2S detection in the given application.

Development of a piperazinyl-NBD-based fluorescent probe and its dual-channel detection for hydrogen sulfide

To selectively detect H₂S based on the thiolysis reaction of 7-nitro-1,2,3-benzoxadiazole (NBD), amines attracted increasing attention since NBD amine is regarded as a new H₂S reaction site. Herein, a novel fluorescent probe, triphenylamine piperazine NBD (TPA-Pz-NBD), was developed. The results showed that it exhibited high selectivity towards H₂S via fluorescence spectroscopy and solution color. Furthermore, TPA-Pz-NBD not only detected H₂S by a dual-channel, turn-on fluorescence signal at 500 nm and turn-off fluorescence signal at 545 nm, respectively, but also displayed a wide detection range of 0-125 μM. In addition, living cell imaging results indicated that TPA-Pz-NBD holds potential for the detection of intracellular H₂S.